Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 7186

Reformat results as: short short into frame detailed detailed into frame

_id	8d5e
authors	Hayes-Roth, Frederick, Waterman, Donald A. and Lenat, Douglas B. (editors)
year	1983
title	Building Expert System
source	vii, 444 p. : ill
summary	Reading,Mass.: Addison-Wesley Pub., 1983. 1: include bibliography: p. 405-420 -- (Teknowledge Series in Knowledge Engineering. Hayes-Roth, Frederick, series editor). This book is a collaboration of 38 expert system researchers and developers. It provides a broad introduction to the concepts and methods necessary for an understanding of how these systems work
keywords	AI, expert systems
series	CADline
last changed	2003/06/02 10:24

_id	08c4
authors	Mylopoulos, John, Shibahara, Tetsutaro and Tsotsos, John K.
year	1983
title	Building Knowledge-Based Systems : The PSN Experience
source	IEEE Computer. IEEE Computer Society, October, 1983. vol. 16: pp. 83-88. includes bibliography
summary	Knowledge-representation languages have been classified traditionally as declarative or procedural, depending on whether their basic features come from mathematical logic or data structures on one hand, or from programming languages on the other hand. Procedural representation languages are particularly well suited for heuristic knowledge, and their use can lead to efficient searching on the part of an expert system. Many attempts have been made to integrate features of declarative and procedural representation languages. PSN is one attempt that focuses on the integration of semantic network and procedural notions
keywords	systems, knowledge base, semantic networks, integration,
series	CADline
last changed	2003/06/02 13:58

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	8b75
authors	Cullen, Ian
year	1983
title	Expert Systems in Architectural and Planning Education
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. IV.1-IV.15
doi	https://doi.org/10.52842/conf.ecaade.1983.x.a7j
summary	The paper discusses the problems and possibilities of a project initiated recently within the Bartlett in the general area of knowledge engineering. The aim is to assemble a set of knowledge bases which may be explored interactively by students. The system will differ from traditional CAL packages in that it will be both problem oriented - designed to extract from the students the information required to reach a specific decision - and capable of providing an explanation of its approach at any point.
keywords	Knowledge Engineering
series	eCAADe
last changed	2022/06/07 07:50

_id	e8c7
authors	Feigenbaum, Edward A. and McCorduck, Pamela
year	1983
title	The Fifth Generation : Artificial Intelligence and Japan's Computer Challenge to the World
source	ix, 275 p. Reading, Mass.: Addison- Wesley Pub. Co., 1983. includes bibliography: p. 268
summary	Knowledge is the future power and Japan wants to be the first in developing and marketing the Fifth Generation of computers
keywords	What is The Fifth Generation? Why Japan ? and how would it affect the Western world? expert systems, hardware, AI
series	CADline
last changed	2003/06/02 10:24

_id	4052
authors	Gero, John S., Akiner , Tuncer V. and Radford, Antony D.
year	1983
title	What's What and What's Where : Knowledge Engineering in the Representation of Building by Computer
source	1983. 205-215 pp. : ill. floor planes. include a short bibliography
summary	Knowledge engineering allows for the encoding of both numeric and symbolic knowledge as inferences. It provides a fundamentally different means of representing buildings than do traditional data structures and databases. A prototypical knowledge engineering reasoning system which reasons about topological relationships, geometric entities and attributes of buildings is described. It is applied in the analysis of an existing small hotel. Using knowledge engineering we can expect future CAAD system to be different to the one with which we have become familiar
keywords	building, representation, reasoning, knowledge, analysis, evaluation, systems
series	CADline
email
last changed	2003/06/02 13:58

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	610b
authors	Hall, R.N.
year	1983
title	The Use of Gable OMS (Object Modelling System) in the Building Design ProcessThe Use of Gable OMS (Object Modelling System) in the Building Design Process
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.1-III.18
doi	https://doi.org/10.52842/conf.ecaade.1983.x.b6t
summary	GABLE CAD SYSTEMS comprise a suite of integrated sub-systems, one of which is OMS. The use of OMS in the development of a building design enables three dimensional graphical modelling of objects associated with buildings. Thus furniture, fittings and fixtures may be located within any room in a building or outside a building or in relation to other groups of objects unrelated to a building. Once located, objects and building may be seen in 2D plan and elevation/section projection or 3D projection (perspectives, axonometrics, isometrics, etc.). In this way furniture, people, cars, trees,landscape objects may all be modelled and graphically represented in addition to the modelling capabilities enabled using GABLE BMS (Building Modelling System). These graphically represented 2D and 3D views of objects can then be passed into GABLE IDS for further embellishment, annotation or dimensioning to produce detailed working drawings.
keywords	Three Dimensional Graphical Modelling
series	eCAADe
last changed	2022/06/07 07:50

_id	46b2
authors	Rasdorf, William J. and Fenves, Stephen J.
year	1983
title	Organization of a Structural Design Database
source	Electronic Computation Conference Proceedings (8th : 1983 : Houston, TX). American Society of Civil Engineers, pp. 559-571. CADLINE has abstract only
summary	This paper proposes a database schema that supports structural engineering design of buildings. An evaluation and comparison of hierarchical, network, and relational databases shows that relational databases are especially suited to a structural engineering design database. The proposed database schema represents the complex relationships between the components of a building-design database. The schema consists of a structural system hierarchy that relates abstract database components to basic building elements. In addition, it combines topology with attributes to achieve an integration that allows the representation of a broad range of common building configurations and structural systems. The user can combine a basic set of constructs to generate either a general or a very detailed description of a structure. The high degree of integration of topology and attributes yields a database that possesses desirable relational characteristics. The database provides efficient access to components based both on their location and on their attribute values. It also allows the user to add, delete, retrieve, and modify database components and values. The versatility and flexibility of the relational model make it a useful tool for managing building engineering data
keywords	building, details, database, civil engineering, integration
series	CADline
last changed	2003/06/02 13:58

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	ddss9405
id	ddss9405
authors	Ayeni, Bola
year	1994
title	The Design of Decision Support Systems in Urban and Regional Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Planning methodology over the years, has shifted from situations whereby planners think, plan and design for the people to one whereby both people and planners have become important components of the planning process. Consequently, the important urban planning methodology of the last two decades that utilized mathematical models in the planning process is fast becoming obsolete. The paper argues that model building should move to the creation of urban decision support systems for the planning process through the development of expert systems shells that interfaces existing planning models with the knowledge content of planning and planners. The expert system shells as the set of decision rules for determining how existing supply and demand relationships are applied for modelling land use and transportation would be responsible forguiding the development of appropriate geographical information systems, supporting land use and other models in a coordinated manner, for communicating with these other systems componentsand for guiding interactions between them and the user. Furthermore, decision support systems should be designed to bring the whole of the knowledge base to bear on a problem through a flexible and adaptive solution system that makes explicit use of both the analysts models and the decision makers expert knowledge. It is argued that this understanding leads to the development of three crucial issues for the design of decision support systems in urban and regional planning;namely the development of user friendly integrated urban land-use transportation models, the development of expert geographical information systems and the development of expert systemshells for many of the routine tasks planners deal with.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9811
id	ddss9811
authors	Barbanente, A., Conte, E. and Monno, V.
year	1998
title	Changing trends and approaches in human and computer modelling for social housing policies
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper discusses conceptual issues, goals and preliminary results of an on-going research which aims at building a Decision Support System for public housing environmental oriented maintenance and management in a city in Southern Italy, Bari. Traditional post-war Italian housing policies are compared with more recent approaches in the field, pointing out the change from quantitative, aggregated, more simple building problems and relatedapproaches to qualitative, differentiated, complex ones integrating social, economic and environmental dimensions with the aim of regenerating deteriorated residential areas. The paper claims for the need shift, both in the human and computer areas, from traditional quantitative models to new approaches able to manage also qualitative variables, temporal dynamics, emergencies, and intentionality, since they appear key aspects of the real world to be modelled. The housing estate of Bari and its needs of maintenance and management are examined, eliciting essential related knowledge using the interview technique. The clear orientation towards sustainable policies for urban regeneration, at a local, national, and Community level, is also considered. The innovative and collaborative nature of such policies and the attention to be paid to the social aspects ofthe problem require a complex DSS, integrating various kind of hypertexts, information systems and case-based fuzzy expert systems, whose main aims, functions, software and general organisation are outlined in the paper.
series	DDSS
last changed	2003/11/21 15:16

_id	ecaade2023_382
id	ecaade2023_382
authors	Blahut, Sarah and Harnoncourt-Fuchs, Marie-Therese
year	2023
title	Mixed Reality Interactive Representations for the Assembly of a Custom Timber Tower
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 751–760
doi	https://doi.org/10.52842/conf.ecaade.2023.2.751
summary	In recent years, many projects have emerged testing the use of augmented reality (AR) and mixed reality (MR) systems in the custom design and fabrication of architectural projects at a variety of scales using digital and analog tools. This paper presents a series of MR systems for key modes of interactive representations in the assembly process of a custom timber tower, intending to expand an area of research on the use of MR as a critical medium for architectural representation in design customization. The series of MR systems were developed to assist and expedite the physical assembly of customized timber parts and connections for the large-scale tower with a small team of students and carpenters. The MR systems are built as interactive representations of the 3D digital design model, allowing the user to see connections in real-time on physical materials in order to perform collaborative preparation and assembly tasks with analog tools. Each MR system relied on a single user, wearing a HoloLens 2, to use hand gestures to place and interact with 3D Rhino model representations of the tower and individual parts overlaid in the physical context at 1:1 scale. The MR systems deployed as interactive 3D representations were evaluated at three key stages in the material preparation and assembly processes. The project tested the use of MR systems created for a series of tasks that enabled the fast assembly of the tower, which is almost 10 meters high. The outlook explores the perspective of how MR systems augment modes of architectural representation through human interaction, collaboration, and accessibility (also for non-expert users), using digital and analog tools, and how these systems provide greater agency for customization and variety in design and building.
keywords	Mixed Reality, Interactive Representation, Customization, HoloLens2, Head-Mounted Display, Digital and Analog, Augmented Reality
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ddss9411
id	ddss9411
authors	Bouillé, Francois
year	1994
title	Mastering Urban Network Intersection And Superimposition, in an Object-oriented Knowledge System Integrating Rules, Neurons and Processes
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Many networks cover the urban texture, either superimposed at a variable distance, or really intersecting, or even in interconnection. We briefly recall the HBDS model, working on persistent abstract data types associated to graphical representations and carrying algorithms expressing conditions to be verified and/or actions to be performed. HBDS is an integrated system too, including database, expert system dealing with fuzzy rules and facts, discrete simulation engine, and neural engine; it has a general purpose programming language. Any urban network is associated to a given prototype, according to the same scheme named prototype with more specific components. These prototypes allow to build the different thematic structures instantiations of the prototypes. All possible cases of arc intersection or "pseudo-intersection" (simple superimposition)or interconnection are obtained by, owing to new prototypes. Moreover, such (pseudo)-intersections are automatically recognized and processed without a human intervention, owing to classes ofconstraints and classes of rules. They deal with particular constraints concerning the location of some urban furniture, and rules concerning the way a cable or a pipe must follow according to thepre-existing other networks in a given area, the minimal distances, minimal or maximal depths, and some required equipments. Urban classes of (pseudo-)intersections inserted in the hyperciass"neuron", inheriting of neural features, may be used for automated learning of urban knowledge; owing to their "behavior", these neurons can communicate and perform actions on other components. Urban classes inserted in the hyperciass "process" may be used for building very large models simulating complex urban phenomenons, thus allowing a better understanding of the real phenomenons. As a conclusion, we emphasize the methodological aspects of object-oriented integration for an efficient processing of the urban context, based on prototyping and mixing rules, neurons and processes.
series	DDSS
last changed	2003/08/07 16:36

_id	caadria2019_195
id	caadria2019_195
authors	Brandao, Filipe JS and Paio, Alexandra
year	2019
title	Context-Aware Mass Customization Construction System - Methods for user captured as-built plans
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 101-110
doi	https://doi.org/10.52842/conf.caadria.2019.2.101
summary	The problem of context, a fundamental aspect of dealing with built environments, has not been adequately addressed by mass customization systems so far, which has limited their scope of application. The aim of the present article is to evaluate the adequacy of existing methods of producing as-built plans of rooms by non-expert users for the automatic generation and production of partition walls for building renovation. This paper highlights criteria to develop appropriate methods of capturing context for mass customization construction systems.
keywords	Mass Customization; As-built Plans; Building Renovation; Computational design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_473
id	ecaadesigradi2019_473
authors	Brandao, Filipe, Paio, Alexandra and Lopes, Adriano
year	2019
title	Interactive algorithm for generating accurate as-built plans by building owners
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 69-78
doi	https://doi.org/10.52842/conf.ecaade.2019.2.069
summary	Mass Customization systems in architecture have yet to adequately address the problem of capturing physical context, a fundamental aspect of dealing with building renovation, which has limited their scope of application. Previous research has demonstrated that existing methods of capturing as-built plans of rooms by non-expert users do not produce sufficiently accurate results for digital fabrication. The present paper reports on research into the development of an algorithm for semi-automated survey of convex or non-convex rooms by building owners. The improved workflow is tested by expert and non-expert users in a to-be renovated building and the results are compared with existing methods of survey.
keywords	Mass Customization; As-built Plans; Building renovation; Polygon partition;
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ddss9415
id	ddss9415
authors	Cajati, Claudio
year	1994
title	Innovative Expert Systems With Hypertextual User Interfaces: A Special Support for the Building Recovering Project
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper, first of all a short account on the peculiarity of knowledge in the domain of Architectural and Building Project, particularly in the Building Recovering Project is given. Thatmeans to focus the concept of "degree of authority" of different types of knowledge with regard to project: regulations; specialist literature having in practice the value of self-regulation; technical updating; exemplary design cases; warnings; analysis methods; heuristics; orientating references. Consequently, the different roles of two basic design & decision support systems, that is expert systems and hypertexts, are considered. The former seem to be quite fit for representing information and knowledge linked to a clear "authority", the one of experts in a certain domain; the latter seem to be quite fit for illustrating the interdisciplinary complexity, different historicinterpretations, various analogous references, and so on. Afterwards, the limits of expert systems based on the logic "true-false" are underlined, and the perspective of expert systems based on more sophisticated and appropriate rules and metarules is proposed. At last, the possible structure of such an innovative expert system, with a hypertextual interface, in the domain of Building Recovering Project is exemplified.
series	DDSS
email
last changed	2003/08/07 16:36

_id	89d9
authors	Cajati, Claudio
year	1992
title	The New Teaching of an Architect: The Rôle of Expert Systems in Technological Culture
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 435-442
doi	https://doi.org/10.52842/conf.ecaade.1992.435
summary	We already have the EEC, that is the European Economic Community. We have to build the CCE, that is the Common Cultural Europe. Architects and building engineers of any european country will be allowed to freely practise in any other country of the EEC. Of course, it is not only matter of coming down of the frontiers, of a greater labour mobility. Not even it will be enough that the university degree courses of the different countries agree to and put into effect the EEC common directives. They need rules and guidelines entering into the merits of practice: rules and guidelines which, rather than a legal and bureaucratic matter, must be the result of a common cultural and technical work, about clear and delimited questions of shared subjects, in which all the community countries be deeply concerned. Analogously, in the very field of research, the project "Human Capital and Mobility" has in view a greater european scientific and technological competitiveness, through an integration of human and material resources of different research centres, such as in shared-cost research projects and in concerted research actions. Such an integration is neither easy nor rapid. The political, social, cultural, technological peculiarities of the countries of the European Community certainly constitute an obstacle for the creation of a supernational cultural and technological pool. of common opportunities. These peculiarities, however, aren't only a restraint for the european community effort of unification and construction of shared goals, constraints, rules, methods, techniques, tools. They mean also a richness, an unrepeatable resourse: they are the result of a historical millenary stratification, which gave rise to urban and architectural contexts, to cultural and technological traditions it would be a serious mistake to waste.
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: