Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2529

Reformat results as: short short into frame detailed detailed into frame

_id	4685
authors	Barsky, Brian A.
year	1984
title	A Description and Evaluation of Various 3-D Models
source	IEEE Computer Graphics and Applications. January, 1984. vol. 4: pp. 38-52 : ill. Includes bibliography
summary	The use of parametric curves and surfaces for object modeling in computer graphics is becoming increasingly popular. There is sometimes, however, a reluctance to use them because it seems that the added power they give is more than offset by the complexity of their formulations and their computations. The purpose of this article is to clarify their meanings and uses and show how much they have in common behind the diversity of their formulations. The author discusses the properties and benefits of using the parametric Hermite, Coons, Bezier, B-spline, and Beta-spline curve and surface formulations
keywords	Hermite, Coons, curved surfaces, Bezier, curves, B- splines, computational geometry, computer graphics
series	CADline
last changed	2003/06/02 10:24

_id	8087
authors	Boehm, Barry W., Penedo, Maria H. and Stuckle, Don E. (et al)
year	1984
title	A Software Development Environment for Improving Productivity
source	IEEE Computer. June, 1984. pp. 30-44 : ill. includes bibliography
summary	The software productivity system (SPS) was developed to support project activities. It involves a set of strategies, including the work environment; the evaluation and procurement of hardware equipment; the provision for immediate access to computing resources through local area networks; the building of an integrated set of tools to support the software development life cycle and all project personnel; and a user support function to transfer new technology. All of these strategies are being accomplished incrementally. The current architecture is VAX-based and uses the Unix operating system, a wideband local network, and a set of software tools. The article describes the steps that led to the creation of the software productivity project and its components and summarized the requirements analyses on which the SPS was based
keywords	productivity, software, hardware, programming
series	CADline
last changed	2003/06/02 10:24

_id	8860
authors	Choi, B.K., Barash, M.M. and Anderson, D.C.
year	1984
title	Automatic Recognition of Machined Surfaces from a 3D Solid Model
source	computer Aided Design. March, 1984. vol. 16: pp. 81-86 : ill. includes bibliography
summary	It has been proposed that a direct link between CAD and CAM be provided through a computer-automated process planning system. Described in this paper are algorithmic procedures to identify machined surfaces (i.e., machining requirements) for a workpiece directly from its 3D geometric description. A machined surface is a portion of workpiece that can be generated by a certain mode of metal removal operation. Machined surfaces are algorithmically recognized from a 3D boundary file, and then their 2 1/2D descriptions are obtained in a data structure (format) suitable for an automated process planning system. A simplified boundary file data structure is introduced in order to explain the machined surface recognition procedures
keywords	A machined surface type is defined as a pattern of faces, and a syntactic pattern recognition method is used to find the machined surface from the boundary file
series	CADline
last changed	2003/06/02 13:58

_id	caadria2020_118
id	caadria2020_118
authors	Chow, Ka Lok and van Ameijde, Jeroen
year	2020
title	Generative Housing Communities - Design of Participatory Spaces in Public Housing Using Network Configurational Theories
doi	https://doi.org/10.52842/conf.caadria.2020.2.283
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 283-292
summary	This research-by-design project explores how public housing estates can accommodate social diversity and the appropriation of shared spaces, using qualitative and quantitative analysis of circulation networks. A case study housing estate in Hong Kong was analysed through field observations of movements and activities and as a site for the speculative re-design of shared spaces. Generative design processes were developed based on several parameters, including shortest paths, visibility integration and connectivity integration (Hillier & Hanson, 1984). Additional tools were developed to combine these techniques with optimisation of sunlight access, maximisation of views for residential towers and the provision of permeability of ground level building volumes. The project demonstrates how flexibility of use and social engagement can constitute a platform for self-organisation, similar to Jane Jacobs' notion of vibrant streets leading to active and progressive communities. It shows how computational design and configurational theories can promote a bottom-up approach for generating new types of residential environments that support participatory and diverse communities, rather than a conventional top-down approach that is perceived to embody mechanisms of social regimentation.
keywords	Urban Planning and Design; Network Configuration; Community Space and Social Interaction; Hong Kong Public Housing
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	e7cf
authors	Eastman, Charles M. and Preiss, K.
year	1984
title	A Review of Solid Shape Modelling Based on Integrity
source	Computer Aided Design March, 1984. vol. 16: pp. 66-80 : ill. includes bibliography.
summary	The potential benefits of using a canonical model for representing the shapes of solid objects has led to the design and implementation of a number of geometric modelers with varying capabilities. This paper reviews the approaches taken in solid modeling by defining the well-formedness conditions which must be implemented in any modeling system. The methods for satisfying the well-formedness constraints in the various solid modeling methods are reviewed, using the concept of integrity constraints. The incorporation of integrity constraints, both explicitly and implicitly, into solid modelers are considered, with particular focus on boundary modelers. The use of integrity constraints for defining shape families and assembly families are also presented. The result is a unified view of solid shape modeling systems that enables their classification and extension into particular application areas
keywords	solid modeling, constraints, B-rep
series	CADline
email
last changed	2003/05/17 10:15

_id	b8b9
authors	Gibson, W.
year	1984
title	Neuromancer
source	Victor Gollancz
summary	Here is the novel that started it all, launching the cyberpunk generation, and the first novel to win the holy trinity of science fiction: the Hugo Award, the Nebula Award and the Philip K. Dick Award. With Neuromancer, William Gibson introduced the world to cyberspace--and science fiction has never been the same. Case was the hottest computer cowboy cruising the information superhighway--jacking his consciousness into cyberspace, soaring through tactile lattices of data and logic, rustling encoded secrets for anyone with the money to buy his skills. Then he double-crossed the wrong people, who caught up with him in a big way--and burned the talent out of his brain, micron by micron. Banished from cyberspace, trapped in the meat of his physical body, Case courted death in the high-tech underworld. Until a shadowy conspiracy offered him a second chance--and a cure--for a price....
series	other
last changed	2003/04/23 15:14

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	40d6
authors	Johnson, Robert E.
year	1984
title	The Integration of Economic Analysis and Computer-based Building Models
source	CIB W-65 Symposium. July, 1984. [19] p. : ill. includes bibliography
summary	Most current methods used to evaluate the economics of building designs are inadequate in that they focus on the evaluation of completed designs and do not assist in the development and creation of designs. They are used after most major design decisions have been made. This paper describes the first year of a two year research project (funded by the National Science Foundation, the U.S. Government) which seeks to integrate economic analysis techniques into design decision-making within the context of an interactive computer-aided architectural and engineering design system. Issues reviewed include the current state of computer software, existing economic analysis models and existing economic analysis software. A conclusion is reached that most economic analysis systems fall into the category of single purpose software and are not adaptable to the wide range of idiosyncratic evaluation models used in real estate, architecture, engineering, construction and building management. Objectives are proposed for a general purpose, interactive cost modeling system that is integrated with a geometric computer-based building model. Initial experiments with a prototype of this system at various stages of the design-construction-use process are discussed. Further development of this system as a research tool for exploring alternative economic modeling procedures is presented
keywords	analysis, evaluation, CAD, architecture, design, methods, economics, integration
series	CADline
last changed	2003/06/02 13:58

_id	2885
authors	Lansdown, J. and Maver, T.W.
year	1984
title	CAD in Architecture and Building
source	Computer Aided Design, Vol 16, No 3
summary	CAAD tool have gradually come into use in architecture over the past years. Appraisal and evaluation of designs and design tools and the preparation of product innovations are discussed. Types of visualisation and flexible layout programs for CAAD are assessed. The areas which knowledge-based design systems should cover are discussed .
series	journal paper
email
last changed	2003/06/10 15:55

_id	5c07
authors	Lee, H.-L., Liu, Y.-T., Chen, S.-C., Tang, S.-K. and Huang, C.-P., Huang, C.-H., Chang, Y.-L., Chang, K.-W. and Chen, K.-Y.
year	2002
title	A Comparative study of protocol analysis for - Spatiality of a Text-based Cyberspace
doi	https://doi.org/10.52842/conf.ecaade.2002.262
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 262-266
summary	Graduate Institute of Architecture, National Chiao Tung University, Hsinchu, 30050, TAIWAN The adaptation of the word cyberspace (Gibson, 1984) following the emergence of the World Wide Web Internet not only succinctly revolutionized the correlation of time and space but also poised to challenge how we view the existing spatial concept. This research tries to use protocol analysis to examine text-based cyberspace, such as bulletin board, chart rooms and so forth, and the objective of this research is to realize the spatiality of cyberspace through the cognitive point of view, and to compare the differences of the definitions and perception ways of spatiality between people with general domain and in design fields. Finally, we validate the existence of cyberspace, where the process not only allows further categorization of spatial elements concluded from the earlier study, but discover that varied backgrounds can affect how a user defines and perceives cyberspace (Strate, 1999).
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ca27
id	ca27
authors	Martens, Bob and Peter, Herbert
year	2004
title	ARCHICAD - BEST PRACTICE: THE VIRTUAL BUILDING™ REVEALED
source	Springer Publishers, Vienna/NewYork (ISBN 3-211-40755-3)
summary	ArchiCAD has been on the market since 1984 and has firmly established itself among the available CAD software packages. The number of ArchiCAD users continues to increase and has already exceeded 100.000 by far. Continuous product development has broadened the program’s possible spectrum of work applications. Therefore, this book provides comprehensive (background) information and descriptions of the many tools, functions and processes, that explain and document their many practical, research and educational uses.
keywords	CAD-software package, Virtual Building
series	book
type	normal paper
email
more	http://www.springer.at/main/book.jsp?bookID=3-211-40755-3&categoryID=0
last changed	2004/08/17 12:34

_id	b0e0
authors	Martens, Bob
year	1991
title	THE ERECTION OF A FULL-SCALE LABORATORY AT THE TECHNICAL UNIVERSITY OF VIENNA
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 44-52
summary	Since 1977 the Institut für Raumgestaltung ('Architectural Styling of Space') had been trying to set up a full-scale laboratory designed for teaching and research purposes. The aim was even more so invigorated by the International Architecture Symposion "Man and Architectural Space" organized by our institute (1984).
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:17

_id	ceb1
authors	Maver, T.
year	1984
title	What is eCAADe?
doi	https://doi.org/10.52842/conf.ecaade.1984.x.d0s
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
summary	The main interest of the organisation is to improve the design, teaching. The design remains the core of the professional education, while computer science can support a better understanding of the design methods. Computers should amplify the human capabilities like engines allowed to carry higher forces, radio and television enabled communication over larger distances and computers today should aid the human intellectual activities, to gain a better insight in design methodology, to investigate the design process.Design research should study more extensively how buildings behave, the integration and interaction of different disciplines which contribute to the optimization of a design and the design criteria. Computers could increase the possibility to satisfy building regulations, to access and update information, to model the design process and to understand how decisions affect the building quality (functional and economical as well as formal aspects). More effort and money should be spent on this research. The organisation has been sponsored by the EEC for bringing CAAD (Computer Aided Architectural Design) educational material at the disposal of the design teachers. The Helsinki conference is the third European meeting (after Delft 1982 and Brussels 1983) which concentrates on information and experience exchange in CAAD-education and looks for common interests and collaboration. A specific joint study program works on typical audiovisual material and lecture notes, which will be updated according to teacher's needs. A demand has been done to implement an integrated CAAD package. eCAADe focuses to integrate computer approaches across country boundaries as well as across disciplinary boundaries, as to reach a higher quality of the design education.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	1b36
authors	Maver, T.W.
year	1984
title	Design Systems in Practice and Education
source	Proceedings of CIB W-78 Colloquium on Integrated CAD Systems, Garston
series	other
email
last changed	2003/06/02 15:00

_id	d9f5
id	d9f5
authors	Maver, T.W.
year	1984
title	Digital Drawing-Boards
source	Times Higher Education Supplement, p. 29
series	other
type	normal paper
email
last changed	2015/02/20 11:27

_id	392f
authors	Maver, T.W.
year	1984
title	Visualisation in Architecture and Planning
source	Proceedings of Aicographics 84, (Ed: P Arthur et al) Milan
series	other
email
last changed	2003/06/02 15:00

_id	ac8b
authors	Mitchell, W.
year	1984
title	CAD Technology, Its Effects on Practice and the Response of Education - an Overview
doi	https://doi.org/10.52842/conf.ecaade.1984.x.b3c
source	The Third European Conference on CAD in the Education of Architecture [eCAADe Conference Proceedings] Helsinki (Finnland) 20-22 September 1984.
summary	Related with the evolution of hardware there also is an evolution of CAD techniques. The very first CAD/CAM packages were developed on mainframes. They moved into practice when 16-bit minicomputers became available. The packages mainly were production drafting applications. The 32-bit super minicomputers give wider possibilities, but at the same time some software problems arise, namely the complexity of CAD- databases and the development and maintenance cost of large programs. With VLSI the distribution of intelligence becomes possible, the enthousiasm for CAD increases, but still the gap between available hardware and high quality software, remains high.Concerning CAD teaching there are severe problems. First of all there are not enough really good designers which know CAD in such a way that they can teach it. Second there is a shortage of equipment and a financial problem. Thirdly there is the question what the students need to know about CAD. which is not clear at the moment. At the University of California, Los Angeles, the following 5 subjects are teached: Computer Support, Computer Literacy, Professional Practice Implications, Exploration of CAD as a Design Medium and Theoretical Foundations of CAD. To use computers as a medium it is necessary to understand architecture, its objects, its operators and its evaluation criteria. The last topic is considered at research level.
series	eCAADe
email
more	www.ecaade.org
last changed	2022/06/07 07:50

_id	812d
authors	Peng, Q. S.
year	1984
title	An Algorithm for Finding the Intersection Lines Between Two B-Spline Surfaces
source	Computer Aided Design July, 1984. vol. 16: pp. 191-196 : ill. includes bibliography.
summary	A divide-and-conquer algorithm is presented for finding all the intersection lines between two B-spline surfaces. Each surface is organized as an n-branch tree. For each intersection line, an initial point is detected after a depth-first search along one tree, i.e. the host tree. Extrapolation methods are then used to trace the entire length of the line, thus the line appears naturally in a continuous form. Efficiency of the algorithm is achieved by employing of an adaptive division strategy and by the careful choice of the representation basis of the patches on both surfaces
keywords	logic, algorithms, B-splines, techniques, divide-and- conquer, intersection, curves, curved surfaces, representation
series	CADline
last changed	2003/06/02 10:24

_id	c57c
authors	Pöyry Matti (Ed.)
year	1984
title	The Third European Conference on CAD in the Education of Architecture [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.1984
source	eCAADe Conference Proceedings / Helsinki (Finnland) 20-22 September 1984
summary	The conference took place in the Department of Architecture of the Helsinki University of Technology (Otaniemi). There were 63 delegates from Finland, Sweden, Switzerland, Belgium, Italy, Australia, France, Israel, Germany, Norway, United Kingdom, Denmark, California and the Netherlands. The conference program was divided into three parts, namely general lectures (T. Maver, W. Mitchell, A. Neil and J. Gero), national situation reports and parallel workshops.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	295d
authors	Amor, R.W., Hosking, J.G. and Mugridge, W.B.
year	1999
title	ICAtect-II: a framework for the integration of building design tools
source	Automation in Construction 8 (3) (1999) pp. 277-289
summary	The development of a system capable of integrating a range of building design tools poses many challenges. Our framework for integrating design tools provides a structured approach, allowing individual parts to be developed independently. In this paper, we describe the overall framework and suggest a method for modeling and implementing each portion of the framework. Furthermore, we illustrate how such a system can integrate several design tools and be realized as a functional design system.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: