Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1691

Reformat results as: short short into frame detailed detailed into frame

_id	4ed0
authors	Bartels, R.H., Beatty, J.C. and Barsky, B.A.
year	1986
title	An Introduction to Splines for Use in Computer Graphics and Geometric Modeling
source	xiv, 476 p. : ill. (some col.) Los Altos, California: Morgan Kaufmann Pub. Inc., 1986. Forewords by Pierre Bezier and Robin A. Forrest. Includes bibliography: p. 455-465 and index
summary	Discusses the use of splines from the point of view of the computer scientist concentrating on parametric spline curves and parametric,tensor-product spline surfaces
keywords	splines, theory, computer graphics, computational geometry
series	CADline
last changed	2003/06/02 14:42

_id	6733
authors	Bettels, Juergen and Myers, David R.
year	1986
title	The PIONS Graphics System
source	IEEE Computer Graphics and Applications. July, 1986. vol. 6: pp. 30-38 : col. ill. includes a short bibliography
summary	During 1979, CERN began to evaluate how interactive computer graphics displays could aid the analysis of high-energy physics experiments at the new Super Proton Synchrotron collider. This work led to PIONS, a 3D graphics system, which features the ability to store and view hierarchical graphics structures in a directed-acyclic-graph database. It is possible to change the attributes of these structures by making selections on nongraphical information also stored in the database. PIONS is implemented as an object-oriented message-passing system based on SmallTalk design principles. It supports multiple viewing transformations, logical input devices, and 2D and 3D primitives. The design allows full use to be made of display hardware that provides dynamic 3D picture transformation
keywords	visualization, computer graphics, database, systems, modeling
series	CADline
last changed	2003/06/02 13:58

_id	09b3
authors	Bier, Eric A. and Sloan, Kenneth R. Jr.
year	1986
title	Two-Part Texture Mappings
source	IEEE Computer Graphics and Applications September, 1986. pp. 40-53 : col. ill. includes bibliography.
summary	Most published techniques for mapping two-dimensional texture patterns onto three-dimensional curved surfaces assume that either the texture pattern has been predistorted to compensate for the distortion of the mapping or the curved surfaces are represented parametrically. The authors address the problem of mapping undistorted planar textures onto arbitrarily represented surfaces. Their mapping technique is done in two parts. First the texture pattern is embedded in 3- space on an intermediate surface. Then the pattern is projected onto the target surface in a way that depends only on the geometry of the target object (not on its parametrization). Both steps have relatively low distortion, so the original texture need not be predistorted. The authors also discuss interactive techniques that make two-part mapping practical
keywords	texture mapping, curved surfaces, computer graphics, rendering
series	CADline
last changed	2003/06/02 10:24

_id	c27d
authors	Flemming, U., Coyne, R.F. and Glavin, T.J. (et al)
year	1986
title	ROOS1 -- Version One of a Generative Expert System for the Design of Building Layouts
source	17 p. : ill. Pittsburgh: Engineering Design Research Center, Carnegie Mellon University, September, 1986
summary	ROOS1 is a generative expert system for the design of building layouts. The system is intended to complement human designers' performance through (a) its ability to systematically search for alternative solutions with promising trade-offs; and (b) its ability to take a broad range of design concerns into account. Work on the system provides insights into the applicability of Artificial Intelligence techniques to space planning and building design in general. The system is based on a general generate-and-test paradigm. Its main components are a generator, a tester and a control strategy (which is to be expanded later into a genuine planner). The generator is restricted to the allocation of rectangles. The spatial relations above, below, to the left and the right are defined for pairs of objects in a layout and serve as basic design variables which define differences between solutions and govern the enumeration of alternatives. Within the class of layouts it is able to produce, the generator is completely general and able to generate all realizable sets of spatial relations for a given number of objects. In contrast, the tester is domain-specific and incorporates knowledge about the quality of layouts in a specific domain. The system can be applied to various domains by running it with the appropriate tester and, possibly, the appropriate control strategy. The control strategy itself mediates between planner and tester and, when expanded into a planner, is able to streamline the search for alternatives. The system will go through a sequence of versions with increasing complexity. Each version will have a conceptually clean and clear architecture, and it is the authors' intention to evaluate each architecture explicitly in terms of its promises and limitations with respect to various domains. The first of these versions is described in the present paper
keywords	enumeration, combinatorics, layout, floor plans, design, methods, architecture, expert systems, planning
series	CADline
email
last changed	2003/06/02 14:41

_id	2363
authors	Gross, Mark Donald
year	1986
title	Design as exploring constraints
source	Massachusetts Institute of Technology, Dept. of Architecture
summary	A theory of designing is proposed, developed, and illustrated with examples from the domain of physical form. Designing is seen as the exploration of alternative sets of constraints and of the regions of alternative solutions they bound. Designers with different objectives reach different solutions within the same set of constraints, as do designers with the same objectives operating under different constraints. Constraints represent design rules, relations, conventions, and natural laws to be maintained. Some constraints and objectives are given at the outset of a design but many more are adopted along the way. Varying the constraints and the objectives is part of the design process. The theory accounts for various kinds of expertise in designing: knowledge of particular constraints in a design domain; inference--calculating the consequences of design decisions; preference--using objectives to guide decision-making; and partitioning--skill in dividing a large and complicated design into sets of simpler pieces, and understanding the dependencies between decisions. The ability to manage ambiguity and vagueness is an important aspect of design expertise. A computational model supporting the theory is proposed and its implementation discussed briefly. The constraint explorer, a computational environment for designing based on constraint descriptions is described. We see how the constraint explorer might be used in connection with a simple space- planning problem. The problem is taken from the procedures of the Stichting Architecten Research (S.A.R.), a specific architectural design methodology developed to help architects systematically explore layout variability in alternative floorplan designs. Finally, a selected review of related work in constraint-based programming environments, architectural design methods, and the intersection of the two fields is presented.
series	thesis:PhD
email
more	http://dmg.caup.washington.edu
last changed	2003/03/15 06:49

_id	0ebf
id	0ebf
authors	Hanson, N.L.R. and Radford, Antony D.
year	1986
title	On Modelling the Work of the Architect Glenn Murcutt
source	Design Computing, pp. 189-203
summary	A prototypical design grammar for a class of country houses by the Australian award-winning architect Glenn Murcutt is developed. The rules of the design grammar are executed to create a design for a country house on a real site with a real brief, in parallel with a design by Murcutt himself. Feedback from Murcutt and the differences between the designs and the reasons for them are discussed. Some conclusions are drawn on the role and assumptions of design grammars as rule- based expert systems and the qualities of design activity which cannot be modelled by such systems
keywords	expert systems, architecture, design, shape grammars, applications
series	CADline
email
last changed	2003/12/01 20:29

_id	2b40
authors	Hanson, N.L.R. and Radford, Antony D.
year	1986
title	Living on the Edge : A Grammar For Some Country Houses by Glenn Murcutt
source	Architecture Australia. 1986. vol. 75: pp. 66-73
summary	Glenn Murcutt is an award-winning Australian architect whose work displays a consistent pattern of development in its response to the environment and brief. A set of syntactic and abductive rules is developed that models the generation of a subset of his work. The model and the architect's response to its operation is described
keywords	architecture, shape grammars, applications
series	CADline
last changed	2003/06/02 13:58

_id	252d
authors	Irving, R.H., Higgins, C.A. and Safayeni
year	1986
title	Computerized Performance Monitoring Systems : Use and Abuse
source	Communications of the ACM. August, 1986. vol. 29: pp. 794-801 : tables. includes bibliography
summary	An exploratory study of computerized performance monitoring and control systems reveals both positive and negative effects. Responses of 50 clerical workers from 2 organizations with computerized monitoring were compared to 94 individuals from 3 organizations in similar jobs without computerized monitoring. The results indicate that computerized monitoring is associated with perceived increases in office productivity, more accurate and complete assessment of workers' performance, and higher levels of organizational control. Respondents indicate that managers overemphasize the importance of quantity and underemphasize the importance of quality in evaluating employee performance. Workers perceive increased stress, lower levels of satisfaction, and a decrease in the quality of their relationships with peers and management as a consequence of computerized monitoring. The relevance of existing models of performance monitoring is examined in light of these findings
keywords	management, performance, evaluation
series	CADline
last changed	2003/06/02 14:41

_id	8e43
authors	Katz, R., Chang, E. and Bhateja, R.
year	1986
title	Version Modeling concepts for Computer-Aided Design Databases
source	ACM SIGMOD Intl. Conf On Management of Data
summary	We describe a semantic object-oriented data model for representing how a complex design database evolves over time. Structural relationships, introduced by the data management system, are imposed on the objects created by existing CAD tools. The relationships supported by the model are (1) version histories, (2) time-varying configurations, and (3) equivalences among objects of different types. We describe mechanisms for (1) identifying current versions, (2) supporting dynamic configuration binding, and (3) verifying equivalence relationships. The data model is being implemented in a Version Server, under development at the University of California, Berkeley.
series	other
last changed	2003/04/23 15:14

_id	a6f7
authors	Mitchell, J.R. and Radford, Antony D.
year	1986
title	Adding Knowledge to Computer-Aided Detailing
source	1986. pp. 31-35
summary	A knowledge based approach to computer-aided detailing is described with an example of a generative system for the design of eaves details for domestic architecture. The program uses Prolog as a knowledge base with an integrated color raster graphics display facility
keywords	knowledge base, systems, architecture, CAD, detailing
series	CADline
last changed	2003/06/02 13:58

_id	2b3a
authors	Olsen, Dan R. Jr.
year	1986
title	MIKE : The Menu Interaction Kontrol Environment
source	ACM Transactions on Graphics. October, 1986. vol. 5: pp. 318-344 : ill. includes bibliography
summary	User Interface Management System (UIMS) called MIKE that does not use the syntactic specifications found in most UIMSs is described. Instead, MIKE provides a default syntax that is automatically generated from the definition of the semantic commands that the interaction is to support. The default syntax is refined using an interface editor that allows modification of the representation of the interface. It is shown how active pictures can be created by adding action expressions to the viewports of MIKE's windowing system. The implications of MIKE's command based dialogue description are discussed in terms of extensible interfaces, device and dialogue-style independence, and system support functions
keywords	design, user interface, management, systems
series	CADline
last changed	2003/06/02 13:58

_id	8816
authors	Penn, Michael A. and Patterson, Richard R.
year	1986
title	Projective Geometry and its Application to Computer Graphics
source	xi, 403 p. Englewood Cliffs, New Jersey: Prentice Hall, 1986. includes bibliography: p. 394-395
summary	The goal of the book is to support the design of solutions to computer graphic problems through an understanding of the underlying elements of projective geometry. Some of the topics discussed are: How to view the structure of two and three dimensional graphic libraries, how to create two dimensional perspective and parallel images of a three dimensional object, how to draw the graph of a function of two real variables, and more
keywords	computer graphics, projective geometry
series	CADline
last changed	2003/06/02 13:58

_id	012b
authors	Radford, Antony D. and Mitchell, J.R.
year	1986
title	Automated Architectural Detailing: a Knowledge Based Approach,
source	1986. vol. 2: pp. 737-745
summary	The working detail in architecture is the means by which an architect describes to a builder how parts of a building are to be fashioned and assembled. The approach to automated architectural detailing described is based on the encoding of the appropriate knowledge in production rules in generative expert systems. An example of such a system for the automation of eaves detailing is presented. The system is written in Prolog with the graphics in Fortran
keywords	expert systems, knowledge base, architecture, detailing, automation, design, synthesis, applications
series	CADline
last changed	2003/06/02 13:58

_id	c3ca
authors	Rasdorf, William J. and Watson, Bruce R.
year	1986
title	ADI : An Adaptive Database Interface for Dynamic Databases
source	ASME Symposium Proceedings on Knowledge based Expert Systems for Manufacturing. Anaheim, CA: American Society of Mechanical Engineers, Production Engineering Division, December, 1986. pp. 119-130. CADLINE has abstract only
summary	The operation of a manufacturing organization often depends on its underlying design and manufacturing databases. In a manufacturing environment, many users, both individuals and application programs, must have access to one or more of the organization's databases to provide, use, or modify data, to control information flow, and to facilitate information management. Such databases routinely undergo dynamic changes in both their content and their structure. These changes commonly result from the design of new products, the introduction of new materials, and the introduction of new machines and processes on the shop floor. Such continuing changes must be reflected in the database schemas and subsequently require that application programs be updated and that online users be educated on a continuous basis. The problem addressed in this paper is that it is difficult for users and application programs to get the information that they need, when they need it, from the multiple heterogeneous database management system (DBMS) environments that have evolved in design and manufacturing organizations. The solution proposed here is to build a general, extendable interface between database users and the many sources of data available to them. This in itself is not a new suggestion; a number of researchers have addressed portions of this problem. In general, the interfaces that they have developed to date are best suited to environments where the structure of the database is static and does not change over time. One of the things that this paper proposes that is different from existing work is an interface which handles the dynamic restructuring nature of manufacturing databases, enabling a user to obtain the most accurate and up to date information as the structure and content of the underlying databases change. Another unique aspect of the DBMS interface proposed herein is that the interface attempts to capture the knowledge that an experienced human user incorporates in his search for data in a database, i.e., it seeks to identify and use the generic knowledge needed to operate a DBMS. This knowledge is used by the interface to enable both the online users and the application programs to request data without knowing the data's location or precisely how to ask for it. Further, the interface makes use of mechanisms that allow the user to request data without knowing the exact identity of the required entities that are stored in the database
keywords	engineering, database, manufacturing, user interface
series	CADline
last changed	2003/06/02 10:24

_id	6728
authors	Rossignac, Jaroslaw R. and Requicha, Aristides A. G.
year	1986
title	Depth- Buffering Display Techniques for Constructive Solid Geometry
source	IEEE Computer Graphics and Applications. September, 1986. vol. 6: pp. 29-39 : ill. some col. includes bibliography
summary	Solid modelers based on constructive solid geometry (CSG) typically generate shaded displays directly from CSG by using ray-casting techniques, which do not require information on the faces, edges, and vertices that bound a solid. This article describes an alternative - a simple new algorithm based on a depth-buffering or z-buffering approach. The z- buffer display algorithm operates directly on CSG, does not require explicit boundary data, and is easier to implement than ray casting. Ray-casting and z-buffering algorithms have comparable performances, but z-buffering is often faster for objects with complex surfaces, because it avoids expensive curve/surface intersection calculations. Because of their simplicity, depth-buffering algorithms for CSG are well- suited to hardware implementations, and may lead to machines simpler than those now being built for ray casting
keywords	geometric modeling, CSG, display, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	a771
authors	Roth, J., Hashimshony, R. and Ishai, E.
year	1986
title	Using the Computer as a Teaching Aid for Architecture Students - Some Examples
doi	https://doi.org/10.52842/conf.ecaade.1986.127
source	Teaching and Research Experience with CAAD [4th eCAADe Conference Proceedings] Rome (Italy) 11-13 September 1986, pp. 127-135
summary	The use of computers has become part of the regular curriculum in many schools of Architecture in the last few years. In addition to specific courses related to basic computer knowledge (e.g.: programming), the computer's main application is in the design studio for evaluating alternatives (e.g.: GOAL, GABLE), or as a drafting aid (e.g.: BIBLE AUTOCAD, ARC+). We believe that using the computer as a regular part of the teaching in all the courses is of great importance. In this paper we present three examples in which the computer was used as a teaching aid in courses not related to the design studio: "Morphology" and "Introduction to lnterior Design".
series	eCAADe
last changed	2022/06/07 07:56

_id	074a
authors	Gross, M.D., Do, E.Y., McCall, R.J., Citrin, W.V., Hamill, P., Warmack, A. and Kuczun, K.S.
year	1998
title	Collaboration and coordination in architectural design: approaches to computer mediated team work
source	Automation in Construction 7 (6) (1998) pp. 465-473
summary	The paper reports on three projects at our laboratory that deal respectively with synchronous collaborative design, asynchronous collaborative design, and design coordination. The Electronic Cocktail Napkin and its mobile extension that runs on hand-held computers supports synchronous design with shared freehand drawing environments. The PHIDIAS hypermedia system supports long-term, asynchronous collaboration by enabling designers of large complex artifacts to store and retrieve rationale about design decisions and the Construction Kit Builder (CKB) supports team design by supporting a priori agreements among team members to avoid conflicts.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	412e
authors	Gross, M.D., Do, E. and McCall, R.J.
year	1997
title	Collaboration and Coordination in Architectural Design: approaches to computer mediated team work
source	TeamCAD 97, 17-23
summary	In 1993 and 1994, instructors and students of architecture at several universities around the world* collaborated briefly on two "virtual design studio" projects. Using off-the-shelf technology of the time-email, CU-See-Me internet video, international conference calls, and exchange of CAD drawings, images, and Quicktime animations-this ambitious project explored the possibility of bringing together diverse members of an international design team together to collaborate on a short term (two week) project. Central to the "Virtual Design Studio" was a 'digital pinup board', an area where participating designers could post and view drawings and textual comments; video links and email exchange provided the media for direct communication media about designs. A report on the project [21] makes clear that the process was not without technical difficulties: a significant amount of communication concerned scheduling and coordinating file formats; disappointingly little was devoted to discussions of design issues. Although it's clear that many of the minor technical problems that inevitably plague a forward-looking effort like the Virtual Design Studio will be solved in the near term, the project also reveals the need for research on software and design practices to make computer mediated design collaboration realize its attractive promise.
series	journal paper
email
last changed	2003/04/23 15:50

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
wos	WOS:000372316000043
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	7f3b
authors	McCall, R. and Johnson, E.
year	1997
title	Using argumentative agents to catalyze and support collaboration in design
source	Automation in Construction 6 (4) (1997) pp. 299-309
summary	Since the 1970s, we have created hypertext systems supporting Rittel's argumentative approach to design. Our efforts aim at improving design by encouraging argumentative, i.e., reasoned-discourse during projects. Despite the intrinsically group-oriented character of the argumentative approach, all of our past prototypes were single-user systems. The project reported here is the first in which we aim at supporting argumentation in group projects. To do this, we augmented our PHIDIAS hyperCAD system to show how argumentative agents can initiate and sustain productive collaboration in design. These agents catalyze collaboration among designers working at different times and/or places by (1) detecting overlaps in the concerns of different participants in a design process, including conflict and support relationships, (2) notifying these people of these overlapping concerns, and (3) enabling a synchronous communication among these people to deal collaboratively with the overlaps. We call these agents argumentative because they represent different personal and professional viewpoints in design and because they promote argumentative discourse among designers about various issues. In addition to identifying and dealing with crucial problems of coordination and collaboration, argumentative agents enable the capture of important design rationale in the form of communication among project participants about these crucial problems.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: