Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1847

Reformat results as: short short into frame detailed detailed into frame

_id	maver_093
id	maver_093
authors	Clarke J.A., Kim J.J., Maver T.W. and Stearn, D.
year	1987
title	Lighting Simulation in Building Design
source	Proc. Electronic Imaging '87, Institute for Graphics Communication, Boston
series	other
email
last changed	2003/09/03 15:01

_id	0347
authors	Maver, T.
year	1988
title	Software Tools for the Technical Evaluation of Design Alternatives
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 47-58
summary	Designing buildings which 'work' - economically, socially and technically - remains the central challenge for architects. This paper is concerned with the state of development of software tools for the evaluation of the technical issues which are relevant at the conceptual stages, as opposed to the detailed stages, of design decision-making. The technical efficiency of building is of enormous economic importance. The capital investment in building in Europe represents some 12% of the Gross Domestic Product; this capital investment is exceeded by an order of magnitude, however, by the operating costs of buildings over their life span. In turn, these operating costs are exceeded - again by an order of magnitude - by the costs associated with the (human) operations which go on within the building, and on which the design of the building has some impact.
series	CAAD Futures
email
last changed	2001/06/04 17:16

_id	e806
authors	Maver, T.W.
year	1987
title	The New Studio: CAD and the Workstation - State of the Art
doi	https://doi.org/10.52842/conf.ecaade.1987.x.g1r
source	Architectural Education and the Information Explosion [eCAADe Conference Proceedings] Zurich (Switzerland) 5-7 September 1987.
summary	This presentation draws on three main sources: (i) reportage of the ATHENA project at MIT, (ii) the experience of the author as a Professor of CAAD, (iii) the work of the eCAADe on the social impacts of CAAD. // Project ATHENA was introduced to MIT in May 1983 as an experiment in the potential uses of advanced computer technology throughout the University curriculum. By the end of the project a network of about 2000 high performance graphics workstations - supplied mainly by IBM and DEC - will have been installed; about half of MIT's $20 million investment is being devoted to the development of new applications software for teaching across almost all the academic Departments, including Architecture.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	maver_108
id	maver_108
authors	Maver, T.W., Clarke, J.A., Stearn, D.d. and Kim, J.J.
year	1987
title	Lighting Simulation in Building Performance Appraisal
source	Proceedings of Electronic Imaging Conference, Boston
summary	This paper describes an advanced, multi-chromatic lighting simulation model capable of representing complex geometries and randomly distributed luminaires. The model, known by the acronym DIM (Dynamic Illumination Model), is now operational as a research prototype and a follow-on project has now commenced which aims to transform this prototype into a polished design tool. DIM accepts a description of a zone's geometry, surface finishes, contents and natural and artificial light sources. A multi-chromatic ray tracking scheme is then employed to obtain the spectral surface luminance distribution corresponding to each light source. Output from the model are the usual contours of planar illuminance and coloured perspective images.
series	other
email
last changed	2003/09/03 15:36

_id	29f0
authors	Maver, T.W.
year	1987
title	Modelling the Cityscape with Geometry Engines
source	Computer Aided Design, vol 19, No 4, 193-196 (+ colour plates)
series	journal paper
email
last changed	2003/06/02 15:00

_id	maver_059
id	maver_059
authors	Maver, T.W.
year	1987
title	Computer Models for Energy Efficient Building Design
source	Proceedings of Symposium on Building Physics, Technical University of Eindhoven
series	other
email
last changed	2003/09/03 15:01

_id	maver_057
id	maver_057
authors	Maver, T.W.
year	1987
title	Visualising the Built Environment
source	Bouw, vol No 23
series	journal paper
email
last changed	2003/09/03 15:01

_id	maver_058
id	maver_058
authors	Maver, T.W.
year	1987
title	Flying Dreams: Visualisation and Animation in Architecture
source	Proceedings of Computer Graphics, 87, London
series	other
email
last changed	2003/09/03 15:01

_id	651b
authors	Maver, Tom and Wagter, Harry (eds.)
year	1988
title	CAAD futures ‘87 [Conference Proceedings]
source	Second International Conference on Computer Aided Architectural Design Futures / ISBN 0-444-42916-6 / Eindhoven (The Netherlands), 20-22 May 1987, 261 p.
summary	The building Industry is Europe's largest single industry employing directly or indirectly 1 in 8 of the working population; yet it is fragmented, ill-organised and unprogressive. Part at least of the cause can be attributed to a failure by the architectural profession to adopt advances in Information Technology - notably Computer Aided Design. The purpose of the series of conferences on CAAD Futures is to chart a route towards a future in which the outcome of current and continuing research and development results in design tools which are acceptable to practioners and which substantially improve the quality of design decision-making and management. The papers which are printed in these proceedings make a significant contribution to our view of the future. Together they cover the range of issues which are the legitimate concern of researchers, developers, vendors, and users of CAAD software; as might be expected, they raise as many questions as they answer and they pose problems as well as reporting progress.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	a936
authors	Boesjes, E.
year	1988
title	The Structure of the Automation Process; Implications for CAAD
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 59-69
summary	In this paper we describe the dynamic process of change of computer components, computer products and user-techniques. We will refer to this process as the process of automation. In the first part we describe the structure of the process of automation. This structure consists of components and relations between these components. Some of the relations can be characterised as regularities. In the second part we briefly describe the State of the Art in CAAD. From the State of the Art and the process of automation we can extrapolate the State of the Future in CAAD. This extrapolation doesn't bring us to the future we want. The structure of the process of automation will have to change if we want future CAAD to develop towards an ideal.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	e861
authors	Burnham, G.T.
year	1987
title	Microcomputer-Based Expert System for the Design of Operational Military Airfields
source	Department of Architectural Science, University of Sydney
summary	This thesis develops a number of prototypical expert systems on a microcomputer to assist the military designer or engineer with facets of military operational airfield design. An existing expert system shell BUILD written in PROLOG-1 was altered to provide a more permanent record of the results of the system execution. The individual knowledge base includes production rules which conform to the BUILD syntax requirements. A number of additional clauses related to the knowledge base are written in PROLOG-1. The expert system consists of some 200 rules and an additional 36 clauses. The rules contain knowledge on soil characteristics pertinent to airfields, factors involved in calculating lengths of runways and factors for determining the effort involved in construction. The knowledge for the expert systems was gathered from a combination of civilian and military literature sources, the author's own experience, and discussions with military and air force personnel currently engaged in the design, planning and construction of these facilities. Development of these prototypical expert systems demonstrates the feasibility of implementing expert systems on microcomputers in this domain. Furthermore, it demonstrates their possible application to military engineering design particularly where the design process relies on a large amount of tabulated data and heuristic knowledge. It is this type of knowledge that is often used by the military engineer to find a timely problem solution when provided with a range of options. [Unpublished. -- CADLINE has abstract only.]
keywords	Applications, Military Engineering, Expert Systems, Design, Planning
series	thesis:MSc
last changed	2002/12/14 19:15

_id	a1a1
authors	Cornick, T. and Bull, S.
year	1988
title	Expert Systems for Detail Design in Building
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 117-126
summary	Computer-Aided Architectural Design (CAAD) requires detailed knowledge of the construction of building elements to be effective as a complete design aid. Knowledge-based systems provide the tools for both encapsulating the "rules" of construction - i.e. the knowledge of good construction practice gained from experience - and relating those rules to geometric representation of building spaces and elements. The "rules" of construction are based upon the production and performance implications of building elements and how these satisfy various functional criteria. These building elements in turn may be related to construction materials, components and component assemblies. This paper presents two prototype knowledge-based systems, one dealing with the external envelope and the other with the internal space division of buildings. Each is "component specific" and is based upon its own model of the overall construction. This paper argues that "CAAD requires component specific knowledge bases and that integration of these knowledge bases into a knowledge-based design system for complete buildings can only occur if every knowledge base relates to a single coordinated construction model".
series	CAAD Futures
last changed	1999/04/03 17:58

_id	c04d
authors	Hauri, H.H.
year	1987
title	Expertenprogramm Struktura
doi	https://doi.org/10.52842/conf.ecaade.1987.x.c6r
source	Architectural Education and the Information Explosion [eCAADe Conference Proceedings] Zurich (Switzerland) 5-7 September 1987.
summary	Das Programm dient dem Architekten als Unterstützung bei seiner Entwurfsarbeit. Es berät ihn bei der Wahl der Tragkonstruktion für Hochbauten und liefert Vorbemessungen für die wichtigsten Bauteile.
series	eCAADe
last changed	2022/06/07 07:50

_id	404e
authors	Oksala , T.
year	1988
title	Logical Models for Rule-based CAAD
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 107-116
summary	The aim of this paper is to present the basic results of a theoretic approach to represent architectural individual forms in CAD systems. From the point of view of design methodology and problem solving these descriptions might be conceived' as parts of possible environments satisfying the laws of some design theory in logical sense. This paper describes results in a series of logical studies towards rule and knowledge based systems for design automation. The effective use of programming languages and computers as design aids in architecture presupposes certain capabilities to articulate built environment logically. The use of graphic languages in the description of environmental items e.g. buildings might be theoretically mastered by formal production systems including linguistic, geometric, and spatio-material generation. The combination of the power of formal mechanisms and logical individual calculus offers suitable framework to generate arbitrary e.g. free spatial compositions as types or unique solutions. In this frame it is natural to represent in a coherent way very complex hierarchical parsing of buildings in explicit form as needed in computer implementations. In order to simulate real design work the individual configurations of possible built forms should be designed to satisfy known rules. In the preliminary stage partial solutions to design problems may be discussed in mathematical terms using frameworks like lattices, graphs, or group theoretical considerations of structural, functional, and visual organization of buildings. The capability to produce mathematically sophisticated geometric structures allows us to generalize the approach further. The theoretical design knowhow in architecture can be partly translated in to some logic and represented in a knowledge base. These rules are used as selection criteria for geometric design candidates in the sense of logical model theory and mathematical optimization. The economy of the system can be developed by using suitable conduct mechanisms familiar e.g. from logic programming. The semantics of logic offers a frame to consider computer assisted and formal generation in design. A number of semantic and pragmatic problems, however, remain to be solved. In any case conceptual analyses based on logic are applicable in order to rationally reconstruct architectural goals contributing to the quality of environmental design, which should be the main goal in the development of design systems in near future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	8e25
authors	Smeltzer, Geert T.A.
year	1987
title	Implications of Expert Systems, Data Management and Data Communication for Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1987.x.u7w
source	Architectural Education and the Information Explosion [eCAADe Conference Proceedings] Zurich (Switzerland) 5-7 September 1987.
summary	The availability of computersystems for processing, managing and communicating data and expertise, does not mean that the results of these processes, will improve automatically. It also shows to much optimism if you expect that the use of process management and communication tools will enlarge the possibilities of the processes themselves. First of all we will have to face the limitations and we will have to accept them, at the cost of the traditional or ordinary architectural education. Mainly we will have to settle for less and worse design results in the beginning of the use of the new tools. In later stages, however, we will have to be able to deal with higher design quality for more aspects at the same time, in stead of the average quality, for mainly only the visual aspect. To meet the limitations of tools like computersystems, we will have to limit and structure the data and expertise, until we will have reached an absolute minimum quantity and a maximum quality of data and expertise. In fact we should strive, at first, for an “implosion” of data and expertise. Then, by adding more and more expertise and necessary data of the same quality, we can control an information explosion.
series	eCAADe
last changed	2022/06/07 07:50

_id	0ad8
authors	Candy, E., Maver, T.W. and Petric, J.
year	1992
title	A Multi-Media Celebration of Robert Adam's Glasgow Architecture
doi	https://doi.org/10.52842/conf.ecaade.1992.043
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 43-54
summary	This paper is a summary of work done in preparation for an exhibition titled "A European Vision: Robert Adam's Glasgow" which marks the bi-centenary of Robert Adam's death. The main contributors to this project, orchestrated over academic sessions 91/92, were the undergraduate and post-graduate students from the Department of Architecture, University of Strathclyde, Glasgow.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	maver_076
id	maver_076
authors	Chen, Y., Fram, I. and Maver, T.W.
year	1995
title	On the Architecture of a Computer-Mediated Collaborative Product Design Environment
source	Intelligent Manufacturing Conference (Ed: S Yang et al) Wuhan, PRC
summary	This paper describes the development of a COmputer-Mediated Collaborative Product development Environment (COMCOPE) within the context of the construction industry, a collaborative project between Anglia Polytechnic University, the University of Strathclyde and some industrial partners. The most prominent feature about COMCOPE lies in the particular emphasis on supporting human-human interaction across time and space through computer mediation within a distributed and networked environment. Based on a review of related research areas, traditional computer integrated construction concepts have been extended within the framework of computer supported cooperative work, which results in the COMCOPE conceptual architecture. As the core of COMCOPE architecture an interaction model has been developed to help articulate collaborative activities. Implementation issues have been addressed, and a prototype system, based on an augmented client-server model, has been outlined.
series	other
type	normal paper
email
last changed	2015/02/20 11:15

_id	maver_089
id	maver_089
authors	Chen, Y., Fram, I. and Maver, T.W.
year	1998
title	A Virtual Studio Environment for Design Integration
source	Advances in Engineering Software, vol 29, No 10, 787-800
summary	In this paper the authors attempt to stress the social dimension of design and the role of explicit support for human-level interaction during design systems integration. A human-centred approach is proposed by taking design integration as the collaborative use of design artefacts, and a virtual studio environment (VSE) framework is presented as an integration vehicle to link the social and technical dimensions. A VSE consists of two subsystems: the VSE base system and the domain resources. While common generic facilities for human-human interaction are embedded within the VSE base system, the domain-specific resources are loosely coupled into VSE via resource agents. A VSE prototype for the domain of building design is described, and a demonstration of the use of the VSE prototype is presented. This is then followed by some discussion on related research and further work.
keywords	Design Integration, Collaborative Design, Human-Human Interaction, Virtual Design Studio, Building Design
series	journal paper
email
last changed	2003/09/03 13:23

_id	maver_075
id	maver_075
authors	Chen, Y.Z. and Maver, T.W.
year	1995
title	Some Experiments on Implementing Collaborative Building Design Environments
source	Building Simulation 95 Conference (Ed: J Mitchell et al) Madison, USA
summary	A collaborative building design environment has been proposed to integrate together both the heterogeneous applications and the dispersed project participants. Based on the functional requirements identified, the conventional building product models have been extended to incorporate high-level concepts such as activity and organisation, which are essential for coordination, and a generic human- human interaction model has been developed, which could not only make the building domain models interaction-aware, but also serve as a base model for developing general interaction utilities. Collaborative design environment prototyping has been described, covering the common project workspace, general interaction utilities and multiuser interfaces. Three distribution schemes for implementing the common project workspace within a distributed environment have also been discussed.
series	other
type	normal paper
email
last changed	2015/02/20 14:46

_id	6496
authors	Chen, Y.Z. and Maver, T.W.
year	1997
title	Integrating Design Tools within a Human Collaborative Working
source	The Int. Journal of Construction IT 5(2), pp. 47-73
summary	This paper stresses the importance of establishing a collaborative working context as the basis for design integration. Within a virtual studio environment framework, a hybrid architecture for design tool integration is presented. Each design tool is wrapped as an autonomous service provider with its own data store; thus the project design data is physically distributed with the design tools. A global product model, which is augmented with meta-data description, is employed to provide a common vocabulary for communications and to assist the management of the distributed resources and activities. Collaboration-aware information is modelled and structured through the meta-data model and a tool model. Based on this, mechanisms for tool service coodination in varying modes are developed. It is then illustrated, through an implemented prototype system, how the integrated design tools might be used in human design work.
series	journal paper
last changed	2003/05/15 21:45

For more results click below: