Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1127

Reformat results as: short short into frame detailed detailed into frame

_id	8c6d
authors	Brooks, H. Gordon
year	1988
title	A New Communication Model for Architecture Using Video and 3D Computer Animated Graphics
doi	https://doi.org/10.52842/conf.acadia.1988.263
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 263-274
summary	The University of Arkansas School of Architecture has produced a half-hour television program describing Richard Meier's Atheneum in New Harmony, Indiana. The program uses an analysis technique developed by Dr. Geoffrey Baker, RIBA. The treatment for the material is a combination of on- site video and computer generated 3D animated graphics. An instrument was developed to evaluate the video and its 3D graphics. Based on analysis of the test data several conclusions are apparent. Students believe the video to be very helpful in understanding this building. This video appears to be paced too quickly for understanding in one viewing. Repetitive viewings of the video are helpful in understanding the content. Some students are able to understand principles presented visually better than those presented verbally, but best learning happens when information is reinforced visually and verbally.
series	ACADIA
last changed	2022/06/07 07:54

_id	819d
authors	Eiteljorg, H.
year	1988
title	Computing Assisted Drafting and Design: new technologies for old problems
source	Center for the study of architecture, Bryn Mawr, Pennsylvania
summary	In past issues of the Newsletter, George Tressel and I have written about virtual reality and renderings. We have each discussed particular problems with the technology, and both of us mentioned how compelling computer visualizations can be. In my article ("Virtual Reality and Rendering," February, 1995, Vol. 7, no. 4), I indicated my concerns about the quality of the scholarship and the level of detail used in making renderings or virtual worlds. Mr. Tressel (in "Visualizing the Ancient World," November, 1996, Vol. IX, no. 3) wrote about the need to distinguish between real and hypothetical parts of a visualization, the need to differentiate materials, and the difficulties involved in creating the visualizations (some of which were included in the Newsletter in black-and-white and on the Web in color). I am returning to this topic now, in part because the quality of the images available to us is improving so fast and in part because it seems now that neither Mr. Tressel nor I treated all the issues raised by the use of high-quality visualizations. The quality may be illustrated by new images of the older propylon that were created by Mr. Tressel (Figs. 1 - 3); these images are significantly more realistic than the earlier ones, but they do not represent the ultimate in quality, since they were created on a personal computer.
series	other
last changed	2003/04/23 15:50

_id	e7a8
authors	Emde, H.
year	1988
title	Geometrical Fundamentals for Design and Visualization of Spatial Objects
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 171-178
summary	Every architectural object is a 3-dimensional entity of the human environment, haptically tangible and optically visible. During the architectural process of planning every object should be designed as a body and should be visualized in pictures. Thus the parts of construction get an order in space and the steps of construction get an order in time. The ideal planning object is a simulated anticipation of the real building object, which is to be performed later on. The possibility to relate the planning object immediately to the building object relies on the fact that they both have the same "geometry" This means: both can be described in the same geometric manner. Creating and visualizing spatial objects is based on geometrical fundamentals. Theoretical knowledge and practical control of these fundamentals is essential for the faultless construction and the realistic presentation of architectural objects. Therefore they have to be taught and learned thoroughly in the course of an architectural education. Geometrical design includes the forming of object- models (geometry of body boundaries), the structuring of object-hierarchies (geometry of body combinations) and the colouring of objects. Geometrical visualization includes controlling the processes of motion, of the bodies (when moving objects) and of the center of observation (when moving subjects) as well as the representation of 3-dimensional objects in 2- dimensional pictures and sequences of pictures. All these activities of architects are instances of geometrical information processing. They can be performed with the aid of computers. As for the computer this requires suitable hardware and software, as for the architect it requires suitable knowledge and capabilities to be able to talk about and to recall the perceivable objects and processes of the design with logic abstracts (language of geometry). In contrast to logical, numerical and textual informations the geometric informations concerning spatial objects are of much higher complexity. Usually these complexes of information are absorbed, processed and transmitted by the architect in a perceptive manner. The computer support in the field of geometry assumes that the processing of perceptions of the human consciousness can be converted by the computer as a framework of logical relations. Computer aided construction and representation require both suited devices for haptical and optical communication and suitable programs in particular.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	c057
authors	Ganter, John H.
year	1988
title	Interactive Graphics : Linking the Human to the Model
source	GIS/LIS'88 Proceeding accessing the world (3rd. : 1988 : San Antonio). December, 1988. Vol. 1: pp. 230-239 : ill. includes bibliography
summary	Discovery and innovation, which have traditionally involved thinking visually and producing images, increasingly benefit from labor-saving devices like GIS and CAD. As new visualization technologies are implemented, it is particularly important to understand the human faculties which use pictures as tools in thinking. Science and engineering define problems, explain processes, and design solutions through observation, imagination and logic. This conceptual thought relies on a cognitive `database' of sensed verbal and non-verbal information, which is retained, managed, and updated within the short and long-term human memories. Research suggests that the individual must actively manipulate a phenomenon under study and its representations to enhance and maintain this database, and to produce abstractions and generalizations. Graphics are particularly important in this process of discovering correlations, contradictions and connections, and subsequent communication to others. Graphics offer high information density, simultaneity, variable detail and the capacity for showing multivariate relations. A `gestalt' property leads to the discovery of new relationships since the graphic whole always exceeds the sum of its parts. A cycle occurs in which the individual interacts with the phenomenon and produces explicit knowledge in the form of graphics and text, testing and refining each against knowledge and abstractions held in the mind
keywords	information, computer graphics, perception, user interface, visualization, cognition, abstraction
series	CADline
last changed	2003/06/02 13:58

_id	cc50
authors	Gossard, D.C., Zuffante, R.P. and Sakurai, H.
year	1988
title	Representing Dimensions, Tolerances, and Features in MCAE Systems
source	IEEE Computer Graphics and Applications. March, 1988. vol. 8: pp. 51-59 : ill. includes bibliography
summary	Presented is a method for explicitly representing dimensions, tolerances, and geometric features in solid models. The method combines CSG and boundary representations in a graph structure called an object graph. Dimensions are represented by a relative position operator. The method can automatically translate changes in dimensional values into corresponding changes in geometry and topology. The representation provides an important foundation for higher level application programs to automate the redesign of assemblies and to automate tolerance analysis and synthesis. A prototype interactive polyhedral modeler based on this representation was implemented
keywords	CAE, B-rep, representation, CAD, CAM, features, dimensioning, tolerances, graphs, topology, geometric modeling, assemblies
series	CADline
last changed	2003/06/02 14:42

_id	e05e
authors	Schon, Donald A. and Wigging, Glenn
year	1988
title	Kinds of Seeing and Their Functions in Designing
source	November, 1988. 31 p. : ill
summary	Architectural designing is described as a kind of experimentation that consists in reflective 'conversation' with the materials of a design situation. A designer sees, moves and sees again. Working in some visual medium -- drawing, in the article examples -- the designer sees what is 'there' in some representation of a site, draws in relation to it, and sees what has been drawn, thereby informing further designing. In all this 'seeing' the designer not only visually registers information but also constructs its meaning -- identifies patterns and gives them meaningsÔ h) 000*°° ÔŒ beyond themselves. Words like 'recognize,' 'detect,' 'discover' and 'appreciate' denote variants of seeing, as do such terms as 'seeing that,' 'seeing as' and 'seeing in.' The purpose here is to explore the kinds of seeing involved in designing and to describe their various functions. At local and global levels, and in many different ways, designing is an interaction of making and seeing, doing and discovering. On the basis of a few minuscule examples, the authors suggest some of the ways in which this sort of interaction works. Some conditions that enable it to work are described. And some of its consequences for design education and for the development of computer environments useful to designers are drawn
keywords	design methods, education, architecture, cognition, perception, design process, semantics, protocol analysis
series	CADline
last changed	2003/06/02 13:58

_id	47e7
authors	Segal, Mark and Sequin, Carlo H.
year	1988
title	PARTITIONING POLYHEDRAL OBJECTS INTO NONINTERSECTING PARTS
source	IEEE Computer Graphics and Applications. January, 1988. vol. 8: pp. 53-67 : ill. some col. includes bibliography
summary	The article describes an algorithm for partitioning intersecting polyhedrons into disjoint pieces and, more generally, removing intersections from sets of planar polygons embedded in three space. Polygons, or faces, need not be convex and may contain multiple holes. Intersections are removed by considering pairs of faces and slicing the faces apart along their regions of intersection. To reduce the number of face pairs examined, bounding boxes around groups of faces are checked for overlap. The intersection algorithm also computes set theoretic operations on polyhedrons. Information gathered during face cutting is used to determine which portions of the original boundaries may be present in the result of an intersection, a union, or a difference of solids. The method includes provisions to detect, and in some cases overcome, the effects of numerical inaccuracy on the topological decisions that the algorithm must make. The regions in which ambiguous results are possible are flagged so that the user can take appropriate action.
keywords	geometric modeling, computer graphics, objects, programming, hidden surfaces, hidden lines, business, practice, systems, user interface, UNIX
series	CADline
type	normal paper
last changed	2005/10/05 07:39

_id	7812
authors	Straber, W. and Seidel, H.-P. (eds.)
year	1989
title	Theory and Practice of Geometric Modeling
source	Springer-Verlag
summary	This book originates from the lectures given at the international conference "Theory and Practice of Geometric Modeling", Blaubeuren, FRG, October 3-7, 1988, that brought together leading experts from universities, system developers, and system users, to discuss new concepts and future trends in geometric modeling. The book covers a variety of topics on an advanced level and is organized as follows. Part A contains new algorithms and techniques for modeling objects that are bounded by free form surfaces. Part B focuses on surface/surface intersections, new types of blending surfaces and speed ups for ray tracing. Part C contains some new geometric tools. Part D discusses different representation schemes in solid modeling, conversions between these different schemes, and some applications. Part E covers some issues of product modeling, automatic tolerancing, high level specification of solid models (constraints, features) and the need for better user interfaces.
series	other
last changed	2003/04/23 15:14

_id	2d0b
authors	Wagter, H.
year	1988
title	CAD-Techniques in Architecture and Building Design, a Realistic Overview
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 7-14
summary	Giving an overview on CAD-techniques in architecture and building design might seem a bit superfluous. Every mentioned subject will be worked out in this conference in much more detail than is possible in the context of this very first paper. Nevertheless it will be useful to sketch a framework. It gives an opportunity to participants to compare, and will help to judge the different influences of the conclusions in the right context. For the authors it might mean that they can fill in their own place, and that their introductions can be short so there will be more time available for in depth explanations. It must be stated that CAAD-Futures theme is at the design part of the building process as mentioned in its announcement "it takes stock of current developments in CAAD and attempts to anticipate the direction of future developments and their relevance to and impact on architectural practice and education, the building industry and the quality of the built environment".
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0697
authors	Balachandran, M.B. and Gero, John S.
year	1988
title	Development of a Knowledge-Based System for Structural Optimization
source	Dordrecht: Kluwer, 1988. pp. 17-24
summary	Optimization is a useful and challenging activity in structural design. It provides designers with tools for better designs while saving time in the design process. The features of conventional optimization tools are presented and their limitations are outlined. The impact and role of knowledge-based methodologies in structural optimization processes is discussed. Structural optimization involves a number of tasks which require human expertise, and are traditionally assisted by human designers. These include design optimization formulation, problem recognition and the selection of appropriate algorithm(s). In this representation and processing of constraints are crucial tasks. This paper presents a framework for developing a knowledge-based system to accomplish these tasks. Based on the needs and the nature of the optimization process, a conceptual architecture of an integrated knowledge-based system is presented. The structure and functions of various components of the system are described
keywords	knowledge base, systems, integration, optimization, structures, engineering
series	CADline
email
last changed	2003/06/02 13:58

_id	c568
authors	Balachandran, M.B. and John S. Gero
year	1987
title	A Model for Knowledge Based Graphical Interfaces
source	AI '87: Proceedings of the Australian Joint Artificial Intelligence Conference. 1987. pp. 505-521. Also published in Artificial Intelligence Developments and Applications edited by J. S. Gero and R Stanton, North-Holland Pub. 1988. -- CADLINE has abstract only.
summary	This paper describes a model for knowledge-based graphical interface which incorporates a variety of knowledge of the domain of application. The key issues considered include graphics interpretation, extraction of features of graphics objects and identification of prototype objects. The role of such knowledge-based interfaces in computer-aided design is discussed. A prototype system developed in Prolog and C is described and its application in the domain of structural engineering is demonstrated
keywords	user interface, computer graphics, knowledge base, systems, civil engineering, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	c6d5
authors	Balachandran, M.B.
year	1988
title	A Model for Knowledge-Based Design Optimization [PhD dissertation]
source	Dept. of Architectural Science, University of Sydney
summary	Unpublished. CADLINE has abstract only. This dissertation is concerned with developments in design decision methodologies applied to computer-aided design. The major aim of this research was to design and develop a knowledge-based computer-aided optimization system that has the ability to emulate some of the human performances in design decision processes. The issues and problems involved in developing a knowledge-based system for design optimization are addressed. A knowledge-based methodology to aid design optimization formulation is investigated. The major issues considered include representation of design description, the variety of knowledge required for the formulation process, recognizing optimization formulations, and selection of appropriate algorithms. It is demonstrated that the knowledge-based control of numerical processes leads to efficient and improved decisions in design. In developing knowledge-based systems for computer-aided decision applications an effective human-machine interface is essential. A model for knowledge-based graphical interfaces is proposed. This model incorporates knowledge for graphics interpretation, extraction of features of graphics objects and identification of prototypical objects. An experimental system developed in Prolog and C is demonstrated in the domain of structural design. The system shows one way of combining knowledge-based systems technology with computer graphics and indicates how knowledge-based interfaces improve the system's interactive capabilities. Finally, the system, OPTIMA, is presented. The system is designed as an integrated knowledge-based decision system using frames, rule bases, menu inputs, algebraic computation and optimization algorithms. The system has been written in LISP, Prolog and C and implemented on SUN Microsystems workstations. The performance of the system is demonstrated using two example problems from the domains of structural and architectural design respectively. The knowledge-based approach to design optimization is shown to be considerably easier and more efficient than those using conventional programs.
keywords	Knowledge Base, Systems, CAD, Representation, Design, Frames, Computer Graphics, User Interface, Decision Making
series	CADline
last changed	2003/06/02 13:58

_id	c7f4
authors	Bancroft, Pamela J. (ed.)
year	1988
title	Computing in Design Education [ACADIA Conference Proceedings]
doi	https://doi.org/10.52842/conf.acadia.1988
source	ACADIA ‘88 Conference Proceedings /Ann Arbor (Michigan / USA) 28-30 October 1988, 311 p.
summary	Progress is being made towards integrating computing into architectural design. This progress is not being made in a coordinated and systematic manner, which is actually a positive factor. Architects will never be scientists or engineers, who hold the distinguishing characteristic of being masters of the scientific method. We have never been so incumbered, although we certainly have given it our best effort. Architects are creative problem solvers, primarily driven by intuition, while coming from a sense of the past and the logic of the present. Our initial attempts at integrating computing into the studio, as evidenced by this collection of papers, is very diverse, based on differing pedagogical assumptions, and the achieving of significantly different results. This would appear to be evidence of a revolutionary approach to the problem rather than a scientific evolutionary approach. Terrific! This is when we as architects are at our best. Although we reach a great number of emphatically dead ends, the successes and discoveries achieved along the way are significant. The diversity and quality of papers submitted suggest that we are indeed pursuing the task of integration in our typical, individual, intuitive, logical manner. I commend all of the authors who submitted proposals and thank them for expanding the envelope of integration into their personal exploration.
series	ACADIA
last changed	2022/06/07 07:49

_id	696c
authors	Beheshti, M. and Monroy, M.
year	1988
title	Requirements for Developing an Information System for Architecture
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 149-170
summary	This paper discusses possibilities of developing new tools for architectural design. It argues that architects should meet the challenge of information technology and computer-based design techniques. One such attempt has been the first phase of the development of an architectural design information system (ADIS), also an architectural design decision support system. The system should benefit from the developments of the artificial intelligence to enable the architect to have access to information required to carry out design work. In other words: the system functions as a huge on-line electronic library of architecture, containing up-to-date architectural design information, literature, documents, etc. At the same time, the system offers necessary design aids such as computer programs for design process, drawing programs, evaluation programs, cost calculation programs, etc. The system also provides data communication between the architect and members of the design coalition team. This is found to be of vital importance in the architectural design process, because it can enable the architect to fit in changes, brought about in the project by different parties. Furthermore, they will be able, to oversee promptly the consequences of changes or decisions in a comprehensive manner. The system will offer advantages over the more commonly applied microcomputer based CAAD and IGDM (integrated graphics database management) systems, or even larger systems available to an architect. Computer programs as well as hardware change rapidly and become obsolete. Therefore, unrelenting investment pressure to up-date both software and hardware exists. The financial burden of this is heavy, in particular for smaller architectural practices (for instance an architect working for himself or herself and usually with few or no permanent staff). ADIS, as an on-line architectural design aid, is constantly up-dated by its own organisation. This task will be co-ordinated by the ADIS data- base administrator (DBA). The processing possibilities of the system are faster, therefore more complex processing tasks can be handled. Complicated large graphic data files, can be easily retrieved and manipulated by ADIS, a large system. In addition, the cost of an on-line system will be much less than any other system. The system is based on one model of the architectural design process, but will eventually contain a variety of design models, as it develops. The development of the system will be an evolutionary process, making use of its users' feed-back system. ADIS is seen as a step towards full automation of architectural design practices. Apart from being an architectural design support system, ADIS will assist the architect in his/her administrative and organisational activities.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	887e
authors	Belajcic, N. D.
year	1988
title	Computer Implementation of Shape Grammars
source	Department of Architectural Science, University of Sydney
summary	An approach is taken that shape grammars can be used as a possible vehicle for automated design generation. Historical background of shape grammars is discussed with emphasis on vocabulary/syntax aspect of the design process and significance of class solutions to problems. Similarities with expert system mechanics and structure is highlighted and advantages and disadvantages of rule-based and frame-based systems are considered. These concepts are implemented in a computer program written in LISP employing icon driven graphic interface with tools for creating shapes and rules. Finally, problems associated with adopted reasoning strategies are reported and areas of further development and improvement suggested. [UNPUBLISHED. CADLINE has abstract only]
keywords	Shape Grammars, Design Process
series	thesis:MSc
last changed	2002/12/14 19:10

_id	2a36
authors	Ben-Moshe, R. and Sorgen, A.
year	1988
title	Parametric Shape Definition by Example
source	12, [13] p., [7] p. of ill. Israel: MICROCAD, 1988(?). includes bibliography
summary	Incorporation of parametric design facilities into CAD systems presents some serious problems. The major issues are: (1) functionality - the need to cater for a great variety of designs, (2) natural user interface, with no need for the user to acquire programming skills, (3) integration and consistency with the 'host' CAD environment
keywords	parametrization, user interface, CAD, geometric modeling, mechanical engineering, CAM
series	CADline
last changed	2003/06/02 13:58

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ea6a
authors	Bentley, Jon L.
year	1988
title	More Programming Pearls : Confessions of a Coder
source	207 p. : ill. Reading, Massachusetts: Addison-Wesley Publishing Co., 1988. includes index
summary	A collection of essays demonstrating the various aspects of programming. Some cover programming techniques using the C and AWK languages, other essays discuss making I/O fit for humans and several sub routines
keywords	programming, algorithms, techniques
series	CADline
last changed	2003/06/02 13:58

For more results click below: