Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2984

Reformat results as: short short into frame detailed detailed into frame

_id	5f4b
authors	Coyne, R.D.
year	1988
title	Logic Models of Design
source	Pitman, London
summary	This monograph places design in a theoretical context which applies developments in knowledge-based systems, logic programming and planning to design. It addresses two important design issues: the interpretation of designs, which concerns the discovery of implicit design attributes, a key activity in design evaluation that can be modelled by deductive inference in logic programming; and the process of generation, whereby a design description is produced which exhibits these implicit design attributes. Implicit attributes can be seen as analogous to the semantic content of natural language utterances. The work presented here is mainly concerned with design generation, and an operational model of design is investigated in which operations on processes are treated in a similar way to operations on form. It is argued that there are advantages in representing control knowledge as rules in a design system, and that logic is an effective medium for this purpose. This is demonstrated by means of programs developed in Prolog and C using the example of spatial layout in buildings. Primarily, this book is directed at those in artificial intelligence (AI) involved in logic programming, planning and expert systems. However, since AI techniques are finding widespread application in industry, the use of an architectural design example makes this work relevant to architects, designers, engineers and developers of intelligent architectural design software.
series	other
email
last changed	2003/04/23 15:14

_id	aef1
authors	Rosenman, M.A., Gero, J.S. and Coyne, R.D. (et al)
year	1987
title	SOLAREXPERT : A Prototype Expert System for Passive Solar Energy Design in Housing
source	Canberra: Aust NZ Solar Energy Society, 1987. vol.II: pp. 361-370. Also published in People and Technology - Sun, Climate and Building, edited by V. Szokolay, Univ. of Queensland, Brisbane, 1988
summary	Passive solar energy design is not an exact science in which a set of analytical procedures can be followed to produce results. Rather it depends heavily on subjective parameters and experience collected over time which is heuristic by nature. At present this knowledge is available in books but while this knowledge is comprehensive, it is unstructured and not always easy to make use of. A computer-based system allows for flexible interactive dialogue and for the incorporation of analytical procedures which may be required. This paper describes work on SOLAREXPERT, a prototype expert system to aid designers in passive solar energy design for single dwellings. The system operates at a strategic level to provide basic advice on the form of construction and types of passive solar systems and at a spatial zone level to provide more detailed advice on sizes and materials. It allows for modification of the information entered so that users may explore several possibilities
keywords	applications, experience, housing, expert systems, energy, design, architecture
series	CADline
email
last changed	2003/05/17 10:17

_id	0ee6
authors	Boyle, R. and Thomas, R.
year	1988
title	Computer Vision: A First Course
source	Blackwell Scientific Publications
summary	Computer vision is a new discipline recently developed from image processing, which is able to take raw images, and, after suitable processing, derive information from them automatically. Computer vision applications are legion in the areas of automated manufacture and robotics, where it may be addressed to such problems as resolving motion in images, and 3-D analysis. This book is a much-needed introduction to the subject for senior undergraduates and graduates. It covers the necessary mathematical techniques at a level suitable for the mathematical literate who has not encountered any image processing before, and proceeds to an examination of some pure vision applications. There is a discussion of human perception and how it relates to machine perception, and there are examples throughout the text, with exercises at the end of each chapter. Table of Contents Perception A pattern recognition system Image acquisition and modelling Low level processing Segmentation A PCB example Line labelling Towards three dimensions Knowledge representation Rule based systemsl Epilogue Appendices.
series	other
last changed	2003/04/23 15:14

_id	e2ad
authors	Coyne, Richard D.
year	1988
title	The Logic of Computer-aided Design
source	Design Computing. 1988. vol. 3: CADLINE has abstract only
summary	The appropriateness of logic and language as the basis of models of the design process are discussed in relation to computer-aided design. A model of design systems is discussed which accounts for the role of interpretative and generative knowledge. It is argued that this knowledge serves to define design spaces. Interpretative knowledge can be used to derive implicit properties of designs, but designs can also be produced by 'abduction.' How interpretative and generative knowledge continue to produce designs is discussed. The relationship to other models is also reviewed
keywords	CAD, logic, design process
series	CADline
email
last changed	2003/05/17 10:13

_id	ab54
authors	Coyne, Richard D.
year	1988
title	Logic Models of Design
source	317 p. London: Pitman, 1988. CADLINE has abstract only
summary	This book constitutes both a theoretical and a technical exploration into modelling design tasks in logic. It provides a framework for describing design processes based on logic, achieved primarily by gathering together various strands evident in theories of reasoning, problem solving, design and knowledge engineering. The book demonstrates the applicability of logic programming and knowledge-based techniques to design, particularly in the area of controlling generative systems. The design task by which this is demonstrated is spatial layout, though the issues reach further than this one application
keywords	reasoning, logic, design process
series	CADline
email
last changed	2003/05/17 10:13

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	cc50
authors	Gossard, D.C., Zuffante, R.P. and Sakurai, H.
year	1988
title	Representing Dimensions, Tolerances, and Features in MCAE Systems
source	IEEE Computer Graphics and Applications. March, 1988. vol. 8: pp. 51-59 : ill. includes bibliography
summary	Presented is a method for explicitly representing dimensions, tolerances, and geometric features in solid models. The method combines CSG and boundary representations in a graph structure called an object graph. Dimensions are represented by a relative position operator. The method can automatically translate changes in dimensional values into corresponding changes in geometry and topology. The representation provides an important foundation for higher level application programs to automate the redesign of assemblies and to automate tolerance analysis and synthesis. A prototype interactive polyhedral modeler based on this representation was implemented
keywords	CAE, B-rep, representation, CAD, CAM, features, dimensioning, tolerances, graphs, topology, geometric modeling, assemblies
series	CADline
last changed	2003/06/02 14:42

_id	aaf1
authors	Oxman, R., Oxman, R.E. and Radford, A.D.
year	1988
title	The Pedagogical Role of the Computer in Design Studies
source	Computer Bulletin. September, 1988. pp. 11-17 : ill. includes a short bibliography
summary	The teaching of architectural design involves the transfer of a broad spectrum of knowledge. This ranges in diversity from the acquisition of skills to those types of domain- distinctive knowledge which are actually employed in the generation of designs. The authors make a broad distinction between instrumental knowledge employed in various stages of design but peripheral to the actual process of generating designs, and conceptual-configurative knowledge which, in fact, makes the generation of designs possible. In the model of the design process in which there is a sequential relationship between the conceptual-formal and physical- material stages of design, this distinction between the instrumental and the conceptual is most marked during the early, or conceptual, stages of design. However it may be seen to follow through all stages of the design process
keywords	design process, education, architecture
series	CADline
email
last changed	2003/06/02 14:41

_id	0ee1
authors	Veness, R. E.
year	1988
title	Bridge Builder: An Expert System for the Design of Non-Equipment Military Bridging
source	Department of Architectural Science, University of Sydney
summary	This thesis describes an expert system for the selection, design and documentation of non-equipment military bridges. The expert system uses the expert system shell BUILD. Extensive use has been made of interfacing between BUILD and Prolog and then by using Prolog's foreign language interface with Pascal procedures and the graphics interface. The expert system, which consists of rules, Pascal procedures and a graphics package, aims at: (a) the determination of the suitable bridging structure; (b) designing a bridge using material constraints; (c) producing a consistent and sound structural design for the bridge and the necessary support structures; (d) producing the necessary working drawings and a bill of materials for the solution. The graphics interface is used to display and manipulate a three dimensional model of the solution and the hardcopy output. [Unpublished. -- CADLINE has abstract only.]
keywords	Military Engineering, Expert Systems, Structures, User Interface, Applications
series	thesis:MSc
last changed	2002/12/14 19:13

_id	d746
authors	Coyne, R., Lee, J., Duncan, D. and Ofluoglu, S.
year	2001
title	Applying web-based product libraries
source	Automation in Construction 10 (5) (2001) pp. 549-559
summary	This paper presents progress on a research project about on-line libraries of product information as used by architects, engineers and other design professionals. We present product library assistant intranet, PLA(id), which is a system programmed in Java for organising product library information on the World-Wide Web (WWW). PLA(id) is to be used experimentally in practice contexts to elicit insights into the applicability of on-line libraries of product information.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ab1e
authors	Coyne, R., McLaughlin, S., Newton, S., Sudweeks, F., Haynes, D. and Jumani, A.
year	1996
title	Report on Computers in Practice: A survey of computers in architectural practice
source	UK: University of Edinburgh
summary	This is a report on the dynamic relationship between information technology (IT) and architectural practice. The report summarises the attitudes and opinions of practitioners gathered through extensive recorded interviews, and compares these attitudes and opinions with the findings of other studies. The report is compiled from the point of view of an understanding of appropriating as preceding as the model for understanding. We thereby connect what is going on in IT with concepts currently under discussion in postmodern thought and in the tradition of philosophical pragmatism. We identify several of the major options identified by practitioners in their use of IT, including practicing without computers, substituting computers for traditional tasks, delivering traditional services in an innovative way through IT, and developing new services with IT. We also demonstrate how firms are changing and are being shaped by the market for architectural services. One of the major areas of change is in how IT and related resources are managed. We also consider how the role of the practitioner as an individual in a firm is changing along with changes in IT, and how different prognoses about the future of IT in practice are influenced by certain dominant metaphors. Our conclusion is that IT is best understood and appropriated when it is seen as fitting into a dynamic field or constellation of technologies and practices. Such an orientation enables the reflective practitioner to confront what is really going on as IT interacts with practice. praxis- practice theory
series	report
last changed	2003/04/23 15:50

_id	30ff
authors	Coyne, R., Park, H. and Wiszniewski, D.
year	2002
title	Design devices: digital drawing and the pursuit of difference
source	Design Studies 23 (3) (2002) pp. 263-286
summary	We examine the uses of a prototypic device, in research and in design, for incorporating manual sketching into computer environments. We move from empirical and evolutionary conceptions of the role of such devices to the phenomenology of disclosure, attending to the revealing, generative, catalytic, metaphoric, signalling and provocative characteristics introduced by such devices. The discussion takes us through a series of steps that each amplifies the role of philosophical concepts of negation and difference in understanding the device.
series	journal paper
last changed	2003/05/15 21:45

_id	ee16
authors	Coyne, R.D., Newton, S. and Sudweeks, F.
year	1989
title	Modeling the Emergence of Schemas in Design Reasoning
source	Design Computing Unit, Department of Architectural and Design Science, University of Sydney, 1989. pp. 173-205. CADLINE has abstract only
summary	The authors explore how neural networks can be used to model important aspects of design reasoning: the way design involves memory; and a 'holistic' kind of reasoning by which designs appear to emerge from that memory. A simple neural network is constructed to demonstrate how information about schemas (in this case, room types) is stored implicitly after exposure to a number of examples of specific rooms. We then demonstrate how new room types emerge from this information. The paper includes a discussion of design, a discussion of schemas from a psycholinguistic perspective, a technical explanation of neural networks and the demonstration of an implemented examples
keywords	neural networks, modeling, design, reasoning, learning, knowledge acquisition, experimentation
series	CADline
email
last changed	2003/05/17 10:13

_id	0748
authors	Coyne, R.D., Rosenman, M.A. and Radford, A.D. (et.al.)
year	1987
title	Innovation and Creativity in Knowledge-based CAD
source	Amsterdam: North-Holland, 1987. pp. 435-465
summary	The authors examine the creativity of knowledge-based design systems from a narrow information processing perspective. As a property of the design process innovation and creativity can be identified by observing both the quality of the product, and also the characteristics of the process itself. The key theme running through the discussion is the acquisition of knowledge as the key to understanding creativity. This involves not only the ability of a system to acquire knowledge, but also its ability to control its own processes and change its own structure. In order to discuss this view a model of design systems is put forward in which a distinction between interpretative and syntactic subsystems for innovation and creativity is made
keywords	design process, knowledge base, systems, creativity, knowledge acquisition, representation
series	CADline
email
last changed	2003/05/17 10:13

_id	e5e2
authors	Coyne, R.D., Rosenman, M.A. and Radford, A.D. (et.al.)
year	1990
title	Knowledge Based Design Systems
source	576 p. : ill Reading, Mass.: Addison-Wesley, 1990. includes bibliographies and index.
summary	This book describes the bases, approaches, techniques, and implementations of knowledge-based design systems, and advocates and develops new directions in design systems generally. A formal model of design coupled with the notion of prototypes provides a coherent framework for all that follows and is a platform on which a comprehension of knowledge-based design rests. The book is divided into three parts. Part I, Design, examines and describes design and design processes, providing the context for the remainder of the book. Part II, Representation and Reasoning, explores the kinds of knowledge involved in design and the tools and techniques available for representing and controlling this knowledge. It examines the attributes of design that must be described and the ways in which knowledge-based methods are capable of describing and controlling them. Part III, Knowledge-Based Design, presents in detail the fundamentals of the interpretation of design, including the role of expert systems in interpreting existing designs, before describing how to produce designs within a knowledge-based environment. This part includes a detailed examination of design processes from the perspective of how to control these processes. Within each of these processes, the place and role of knowledge is presented and examples of knowledge-based design systems given. Finally, the authors examine central areas of human design and demonstrate what current knowledge-based design systems are capable of doing now and in the future
keywords	knowledge base, design process, representation, CAD, AI, prototypes, expert systems
series	CADline
email
last changed	2003/05/17 10:13

_id	e01a
authors	Rosenman, M.A., Coyne, R.D. and Gero, J.S.
year	1987
title	Expert Systems for Design Applications
source	pp. 74-91
summary	Reprinted in J.R. Quinlan (ed.) Applications of Expert Systems. Sydney, Addison-Wesley, (1987) pp. 66-84. The suitability of expert systems to design is demonstrated through three classes of design applications. These are the interpretation of design codes, the interpretation of design specifications to produce designs and, thirdly, a method for conflict resolution applicable to more general classes of design
keywords	design, knowledge, expert systems
series	CADline
email
last changed	2003/05/17 10:17

_id	c568
authors	Balachandran, M.B. and John S. Gero
year	1987
title	A Model for Knowledge Based Graphical Interfaces
source	AI '87: Proceedings of the Australian Joint Artificial Intelligence Conference. 1987. pp. 505-521. Also published in Artificial Intelligence Developments and Applications edited by J. S. Gero and R Stanton, North-Holland Pub. 1988. -- CADLINE has abstract only.
summary	This paper describes a model for knowledge-based graphical interface which incorporates a variety of knowledge of the domain of application. The key issues considered include graphics interpretation, extraction of features of graphics objects and identification of prototype objects. The role of such knowledge-based interfaces in computer-aided design is discussed. A prototype system developed in Prolog and C is described and its application in the domain of structural engineering is demonstrated
keywords	user interface, computer graphics, knowledge base, systems, civil engineering, structures
series	CADline
email
last changed	2003/06/02 13:58

_id	887e
authors	Belajcic, N. D.
year	1988
title	Computer Implementation of Shape Grammars
source	Department of Architectural Science, University of Sydney
summary	An approach is taken that shape grammars can be used as a possible vehicle for automated design generation. Historical background of shape grammars is discussed with emphasis on vocabulary/syntax aspect of the design process and significance of class solutions to problems. Similarities with expert system mechanics and structure is highlighted and advantages and disadvantages of rule-based and frame-based systems are considered. These concepts are implemented in a computer program written in LISP employing icon driven graphic interface with tools for creating shapes and rules. Finally, problems associated with adopted reasoning strategies are reported and areas of further development and improvement suggested. [UNPUBLISHED. CADLINE has abstract only]
keywords	Shape Grammars, Design Process
series	thesis:MSc
last changed	2002/12/14 19:10

_id	2a36
authors	Ben-Moshe, R. and Sorgen, A.
year	1988
title	Parametric Shape Definition by Example
source	12, [13] p., [7] p. of ill. Israel: MICROCAD, 1988(?). includes bibliography
summary	Incorporation of parametric design facilities into CAD systems presents some serious problems. The major issues are: (1) functionality - the need to cater for a great variety of designs, (2) natural user interface, with no need for the user to acquire programming skills, (3) integration and consistency with the 'host' CAD environment
keywords	parametrization, user interface, CAD, geometric modeling, mechanical engineering, CAM
series	CADline
last changed	2003/06/02 13:58

_id	cf08
authors	Blaha, Michael R., Premerlani, William J. and Rumbaugh, James E.
year	1988
title	Relational Database Design Using An Object- Oriented Methodology
source	communications of the ACM. April, 1988. vol. 31: pp. 414-427 : ill. includes a short bibliography
summary	Object-oriented concepts provide a useful abstraction for relational database design. In this article the authors present a design technique that has been used for several projects at General Electric. The methodology is intuitive, expressive, and extensible. The new approach to relational database design is based on the work of Loomis, Sha, and Rumbaugh
keywords	relational database, design, methods, objects, modeling, representation
series	CADline
last changed	2003/06/02 13:58

For more results click below: