Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1834

Reformat results as: short short into frame detailed detailed into frame

_id	0347
authors	Maver, T.
year	1988
title	Software Tools for the Technical Evaluation of Design Alternatives
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 47-58
summary	Designing buildings which 'work' - economically, socially and technically - remains the central challenge for architects. This paper is concerned with the state of development of software tools for the evaluation of the technical issues which are relevant at the conceptual stages, as opposed to the detailed stages, of design decision-making. The technical efficiency of building is of enormous economic importance. The capital investment in building in Europe represents some 12% of the Gross Domestic Product; this capital investment is exceeded by an order of magnitude, however, by the operating costs of buildings over their life span. In turn, these operating costs are exceeded - again by an order of magnitude - by the costs associated with the (human) operations which go on within the building, and on which the design of the building has some impact.
series	CAAD Futures
email
last changed	2001/06/04 17:16

_id	c7e9
authors	Maver, T.W.
year	2002
title	Predicting the Past, Remembering the Future
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary	Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	maver_060
id	maver_060
authors	Maver, T.W.
year	1988
title	Computing Why?
source	Proceedings of CADAC 88 Conference, Teeside,
series	other
email
last changed	2003/09/03 15:01

_id	maver_061
id	maver_061
authors	Maver, T.W.
year	1988
title	Visualisation by Computer
source	Proceedings of the Architect and the Computer, London
series	other
email
last changed	2003/09/03 15:01

_id	651b
authors	Maver, Tom and Wagter, Harry (eds.)
year	1988
title	CAAD futures ‘87 [Conference Proceedings]
source	Second International Conference on Computer Aided Architectural Design Futures / ISBN 0-444-42916-6 / Eindhoven (The Netherlands), 20-22 May 1987, 261 p.
summary	The building Industry is Europe's largest single industry employing directly or indirectly 1 in 8 of the working population; yet it is fragmented, ill-organised and unprogressive. Part at least of the cause can be attributed to a failure by the architectural profession to adopt advances in Information Technology - notably Computer Aided Design. The purpose of the series of conferences on CAAD Futures is to chart a route towards a future in which the outcome of current and continuing research and development results in design tools which are acceptable to practioners and which substantially improve the quality of design decision-making and management. The papers which are printed in these proceedings make a significant contribution to our view of the future. Together they cover the range of issues which are the legitimate concern of researchers, developers, vendors, and users of CAAD software; as might be expected, they raise as many questions as they answer and they pose problems as well as reporting progress.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	a936
authors	Boesjes, E.
year	1988
title	The Structure of the Automation Process; Implications for CAAD
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 59-69
summary	In this paper we describe the dynamic process of change of computer components, computer products and user-techniques. We will refer to this process as the process of automation. In the first part we describe the structure of the process of automation. This structure consists of components and relations between these components. Some of the relations can be characterised as regularities. In the second part we briefly describe the State of the Art in CAAD. From the State of the Art and the process of automation we can extrapolate the State of the Future in CAAD. This extrapolation doesn't bring us to the future we want. The structure of the process of automation will have to change if we want future CAAD to develop towards an ideal.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	a1a1
authors	Cornick, T. and Bull, S.
year	1988
title	Expert Systems for Detail Design in Building
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 117-126
summary	Computer-Aided Architectural Design (CAAD) requires detailed knowledge of the construction of building elements to be effective as a complete design aid. Knowledge-based systems provide the tools for both encapsulating the "rules" of construction - i.e. the knowledge of good construction practice gained from experience - and relating those rules to geometric representation of building spaces and elements. The "rules" of construction are based upon the production and performance implications of building elements and how these satisfy various functional criteria. These building elements in turn may be related to construction materials, components and component assemblies. This paper presents two prototype knowledge-based systems, one dealing with the external envelope and the other with the internal space division of buildings. Each is "component specific" and is based upon its own model of the overall construction. This paper argues that "CAAD requires component specific knowledge bases and that integration of these knowledge bases into a knowledge-based design system for complete buildings can only occur if every knowledge base relates to a single coordinated construction model".
series	CAAD Futures
last changed	1999/04/03 17:58

_id	035e
authors	Gero, John S.
year	1988
title	Prototypes : A Basis for Knowledge-based Design
source	Symposium on Knowledge Based Design in Architecture. 1988. pp. 3-8. Also published in Knowledge Based Systems in Architecture, Acta Polytechnica Scandinavica, Helsinki, edited by J. S. Gero and T. Oksala, 1989
summary	A new conceptual schema called a prototype for the representation of generalized design knowledge is proposed. It contains knowledge necessary for the commencement and the continuation of a design. This paper briefly presents the schema and describes its use in designing. Its use in categorizing design processes is presented
keywords	prototypes, representation, knowledge base, design
series	CADline
email
last changed	2003/06/02 13:58

_id	4a3c
authors	Hall, T.
year	1988
title	Computer Visualisation for design and control
source	The Planner (London) 74(10), pp. 21-25
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	7e15
authors	Kvan, Thomas
year	1997
title	Chips, chunks and sauces
source	International Journal of Design Computing, 1, 1997 (Editorial)
summary	I am sure there is an art in balancing the chunks to use with your chips. Then there is the sauce that envelops them both. I like my chips chunky and not too saucy. Not that I am obsessed with food but I don't think you can consider design computing without chunks. It's the sauce I'm not sure about.The chunks of which I write are not of course those in your salsa picante but those postulated by Chase and Simon (1973) reflecting on good chess players; the chunks of knowledge with which an expert tackles a problem in their domain of expertise. The more knowledge an expert has of complex and large configurations of typical problem situations (configurations of chess pieces), the greater range of solutions the expert can bring a wider to a particular problem. Those with more chunks have more options and arrive at better solutions. In other words, good designs come from having plenty of big chunks available. There has been a wealth of research in the field of computer-supported collaborative work in the contexts of writing, office management, software design and policy bodies. It is typically divided between systems which support decision making (GDSS: group decision support systems) and those which facilitate joint work (CSCW: computer-based systems for co-operative work) (see Dennis et al. (1988) for a discussion of the distinctions and their likely convergence). Most implementations in the world of design have been on CSCW systems, few have looked at trying to make a group design decision support system (GDDSS?). Most of the work in CSCD has been grounded in the heritage of situated cognition - the assumption that collaborative design is an act that is intrinsically grounded in the context within which it is carried out, that is, the sauce in which we find ourselves swimming daily. By sauce, therefore, I am referring to anything that is not knowledge in the domain of expertise, such as modes of interaction, gestures, social behaviours.
series	journal paper
email
last changed	2003/05/15 10:29

_id	ijac20053406
id	ijac20053406
authors	Kvan, Thomas
year	2005
title	Professor Tsuyoshi Sasada 1941-2005
source	International Journal of Architectural Computing vol. 3 - no. 4, 519-526
summary	Tsuyoshi Sasada, known as Tee to so many of us, died on 30 September 2005 at the age of 64 after a long illness.Tee retired from Osaka University in 2004 upon reaching the mandatory retirement age but retained his association as Emeritus Professor.At the time of his death he held appointments as Honorary Professor, National Chiao Tung University (Taiwan) and Expert Researcher, National Institute of Information and Communications Technology. He had been with Osaka University since 1970, having earned his bachelor, master and doctoral degrees at Kyoto University. In 1988 he was appointed Professor in Osaka and established his laboratory, known as the Sasada Lab, from which over 200 students have graduated.
series	journal
email
more	http://www.ingentaconnect.com/content/mscp/ijac/2006/00000004/00000001/art00002
last changed	2007/03/04 07:08

_id	c70a
authors	Lindgren, Christina Axelsson
year	1988
title	Forest Visual Variation as a Recreative Force
source	Knowledge-Based Design in Architecture, Tips-88 (pre-proceedings) (1988 : Otaniemi). editors. John S Gero and T. Oksala. Espoo, Finland: Research Institute for Built Environment, Helsinki University of Technology, Department of Architecture, pp. 149-157. includes bibliography.
summary	--- A revised version of this paper has been published in the Acta Polytechnica Scandinavica series. The article presents some findings concerning the importance of forest visual variation and the possibilities to create a Forest Visual Opportunity Spectrum. In the light of suggestions on theory of recreation and of the actual multiple use planning situation of forests, the possibilities and limits of empirical studies as a tool to receive knowledge of visual aspects of forests are discussed
keywords	planning, knowledge, applications, landscape
series	CADline
last changed	1999/02/12 15:09

_id	2fd0
authors	Maher, Mary Lou, Zhao, F. and Gero, John S.
year	1989
title	Creativity in Humans and Computers
source	Helsinki: Acta Polytechnica Scandinavica, 1989. pp. 129-141. Also Published as : Creativity in Humans and Computers: A Discussion of Creativity in Computer-Aided Architectural Design, in J.S. Gero and T. Oksala (eds.) Symposium on Knowledge-based Design in Architecture, Helsinki University of Technology, pp. 31-44. 1988
summary	This paper explores creativity from a process viewpoint. It examines various strategies employed by humans during their creative acts and posits analogous computational processes. The discussion provides a framework for the current work by the authors on knowledge-based creative design
keywords	creativity, design process, architecture, knowledge base
series	CADline
email
last changed	2003/06/02 13:58

_id	404e
authors	Oksala , T.
year	1988
title	Logical Models for Rule-based CAAD
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 107-116
summary	The aim of this paper is to present the basic results of a theoretic approach to represent architectural individual forms in CAD systems. From the point of view of design methodology and problem solving these descriptions might be conceived' as parts of possible environments satisfying the laws of some design theory in logical sense. This paper describes results in a series of logical studies towards rule and knowledge based systems for design automation. The effective use of programming languages and computers as design aids in architecture presupposes certain capabilities to articulate built environment logically. The use of graphic languages in the description of environmental items e.g. buildings might be theoretically mastered by formal production systems including linguistic, geometric, and spatio-material generation. The combination of the power of formal mechanisms and logical individual calculus offers suitable framework to generate arbitrary e.g. free spatial compositions as types or unique solutions. In this frame it is natural to represent in a coherent way very complex hierarchical parsing of buildings in explicit form as needed in computer implementations. In order to simulate real design work the individual configurations of possible built forms should be designed to satisfy known rules. In the preliminary stage partial solutions to design problems may be discussed in mathematical terms using frameworks like lattices, graphs, or group theoretical considerations of structural, functional, and visual organization of buildings. The capability to produce mathematically sophisticated geometric structures allows us to generalize the approach further. The theoretical design knowhow in architecture can be partly translated in to some logic and represented in a knowledge base. These rules are used as selection criteria for geometric design candidates in the sense of logical model theory and mathematical optimization. The economy of the system can be developed by using suitable conduct mechanisms familiar e.g. from logic programming. The semantics of logic offers a frame to consider computer assisted and formal generation in design. A number of semantic and pragmatic problems, however, remain to be solved. In any case conceptual analyses based on logic are applicable in order to rationally reconstruct architectural goals contributing to the quality of environmental design, which should be the main goal in the development of design systems in near future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	7d26
authors	Pearson, D.G., Alexander, C. and Webster, Robin
year	2001
title	Working Memory and Expertise Differences in Design.
source	J. S. Gero, B. Tversky and T. Purcell (eds), 2001, Visual and Spatial Reasoning in Design, II - Key Centre of Design Computing and Cognition, University of Sydney, Australia
summary	The Creative Synthesis task devised by Finke and Slayton(1988) has been widely used as an experimental measure of mentalsynthesis, but previous studies have often failed to demonstrate anysignificant benefits of external support on participants’ performance.This paper discusses a study that examined novice and expert drawers’performance of synthesis using a modified stimuli set that was designedto increase the load on visuo-spatial working memory. The resultsshowed a significant increase in Transformational Complexity(Anderson & Hesltrup, 1993) of patterns produced by the expert groupwhile using sketching. It is argued that experts are more effective atusing sketching interactively to increase complexity, while novices relymore on using it as a simple memory aid.
series	other
email
more	http://www.arch.usyd.edu.au/kcdc/conferences/vr01/
last changed	2003/05/02 11:14

_id	0ad8
authors	Candy, E., Maver, T.W. and Petric, J.
year	1992
title	A Multi-Media Celebration of Robert Adam's Glasgow Architecture
doi	https://doi.org/10.52842/conf.ecaade.1992.043
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 43-54
summary	This paper is a summary of work done in preparation for an exhibition titled "A European Vision: Robert Adam's Glasgow" which marks the bi-centenary of Robert Adam's death. The main contributors to this project, orchestrated over academic sessions 91/92, were the undergraduate and post-graduate students from the Department of Architecture, University of Strathclyde, Glasgow.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	maver_076
id	maver_076
authors	Chen, Y., Fram, I. and Maver, T.W.
year	1995
title	On the Architecture of a Computer-Mediated Collaborative Product Design Environment
source	Intelligent Manufacturing Conference (Ed: S Yang et al) Wuhan, PRC
summary	This paper describes the development of a COmputer-Mediated Collaborative Product development Environment (COMCOPE) within the context of the construction industry, a collaborative project between Anglia Polytechnic University, the University of Strathclyde and some industrial partners. The most prominent feature about COMCOPE lies in the particular emphasis on supporting human-human interaction across time and space through computer mediation within a distributed and networked environment. Based on a review of related research areas, traditional computer integrated construction concepts have been extended within the framework of computer supported cooperative work, which results in the COMCOPE conceptual architecture. As the core of COMCOPE architecture an interaction model has been developed to help articulate collaborative activities. Implementation issues have been addressed, and a prototype system, based on an augmented client-server model, has been outlined.
series	other
type	normal paper
email
last changed	2015/02/20 11:15

_id	maver_089
id	maver_089
authors	Chen, Y., Fram, I. and Maver, T.W.
year	1998
title	A Virtual Studio Environment for Design Integration
source	Advances in Engineering Software, vol 29, No 10, 787-800
summary	In this paper the authors attempt to stress the social dimension of design and the role of explicit support for human-level interaction during design systems integration. A human-centred approach is proposed by taking design integration as the collaborative use of design artefacts, and a virtual studio environment (VSE) framework is presented as an integration vehicle to link the social and technical dimensions. A VSE consists of two subsystems: the VSE base system and the domain resources. While common generic facilities for human-human interaction are embedded within the VSE base system, the domain-specific resources are loosely coupled into VSE via resource agents. A VSE prototype for the domain of building design is described, and a demonstration of the use of the VSE prototype is presented. This is then followed by some discussion on related research and further work.
keywords	Design Integration, Collaborative Design, Human-Human Interaction, Virtual Design Studio, Building Design
series	journal paper
email
last changed	2003/09/03 13:23

_id	maver_075
id	maver_075
authors	Chen, Y.Z. and Maver, T.W.
year	1995
title	Some Experiments on Implementing Collaborative Building Design Environments
source	Building Simulation 95 Conference (Ed: J Mitchell et al) Madison, USA
summary	A collaborative building design environment has been proposed to integrate together both the heterogeneous applications and the dispersed project participants. Based on the functional requirements identified, the conventional building product models have been extended to incorporate high-level concepts such as activity and organisation, which are essential for coordination, and a generic human- human interaction model has been developed, which could not only make the building domain models interaction-aware, but also serve as a base model for developing general interaction utilities. Collaborative design environment prototyping has been described, covering the common project workspace, general interaction utilities and multiuser interfaces. Three distribution schemes for implementing the common project workspace within a distributed environment have also been discussed.
series	other
type	normal paper
email
last changed	2015/02/20 14:46

_id	6496
authors	Chen, Y.Z. and Maver, T.W.
year	1997
title	Integrating Design Tools within a Human Collaborative Working
source	The Int. Journal of Construction IT 5(2), pp. 47-73
summary	This paper stresses the importance of establishing a collaborative working context as the basis for design integration. Within a virtual studio environment framework, a hybrid architecture for design tool integration is presented. Each design tool is wrapped as an autonomous service provider with its own data store; thus the project design data is physically distributed with the design tools. A global product model, which is augmented with meta-data description, is employed to provide a common vocabulary for communications and to assist the management of the distributed resources and activities. Collaboration-aware information is modelled and structured through the meta-data model and a tool model. Based on this, mechanisms for tool service coodination in varying modes are developed. It is then illustrated, through an implemented prototype system, how the integrated design tools might be used in human design work.
series	journal paper
last changed	2003/05/15 21:45

For more results click below: