Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 6857

Reformat results as: short short into frame detailed detailed into frame

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	8c6d
authors	Brooks, H. Gordon
year	1988
title	A New Communication Model for Architecture Using Video and 3D Computer Animated Graphics
doi	https://doi.org/10.52842/conf.acadia.1988.263
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 263-274
summary	The University of Arkansas School of Architecture has produced a half-hour television program describing Richard Meier's Atheneum in New Harmony, Indiana. The program uses an analysis technique developed by Dr. Geoffrey Baker, RIBA. The treatment for the material is a combination of on- site video and computer generated 3D animated graphics. An instrument was developed to evaluate the video and its 3D graphics. Based on analysis of the test data several conclusions are apparent. Students believe the video to be very helpful in understanding this building. This video appears to be paced too quickly for understanding in one viewing. Repetitive viewings of the video are helpful in understanding the content. Some students are able to understand principles presented visually better than those presented verbally, but best learning happens when information is reinforced visually and verbally.
series	ACADIA
last changed	2022/06/07 07:54

_id	a1a1
authors	Cornick, T. and Bull, S.
year	1988
title	Expert Systems for Detail Design in Building
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 117-126
summary	Computer-Aided Architectural Design (CAAD) requires detailed knowledge of the construction of building elements to be effective as a complete design aid. Knowledge-based systems provide the tools for both encapsulating the "rules" of construction - i.e. the knowledge of good construction practice gained from experience - and relating those rules to geometric representation of building spaces and elements. The "rules" of construction are based upon the production and performance implications of building elements and how these satisfy various functional criteria. These building elements in turn may be related to construction materials, components and component assemblies. This paper presents two prototype knowledge-based systems, one dealing with the external envelope and the other with the internal space division of buildings. Each is "component specific" and is based upon its own model of the overall construction. This paper argues that "CAAD requires component specific knowledge bases and that integration of these knowledge bases into a knowledge-based design system for complete buildings can only occur if every knowledge base relates to a single coordinated construction model".
series	CAAD Futures
last changed	1999/04/03 17:58

_id	e8f1
authors	Frazer, J.
year	1988
title	Plastic Modelling - The Flexible Modelling of the Logic of Structure and Spaces
source	CAAD futures ‘87 [Conference Proceedings / ISBN 0-444-42916-6] Eindhoven (The Netherlands), 20-22 May 1987, pp. 199-208
summary	Plastic Modelling is a technique which allows the computer model to be easily developed and manipulated. In particular it models not only building geometry but also logical relationships between elements, components, structure and spaces. It is the author's contention that this approach to solid modelling is particularly suitable for the interactive development of architectural design ideas.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	6745
authors	Giraud, Christian and Hanrot, Stephane
year	1988
title	Elements for Spatial Reasoning in Construction
source	Robotics in Construction, International Symposium (5th : 1988 : Tokyo, Japan). pp. 105- 113 : ill. includes bibliography
summary	According to AI techniques, spatial reasoning is seen in construction as generation and solving of goals involving a spatial representation model of buildings defining a rich taxonomy of parts and elements, and spatial relationships between these parts and elements. The authors define spatial representation model and spatial relationship from previous experiments in architect knowledge representation and automated surveying. The aim is to enable very abstract and short descriptions of building component assemblies, from designers at drawing-boards or from workers on sites, which can be processed and transformed in basic geometrical properties
keywords	reasoning, representation, construction, automation
series	CADline
last changed	2003/06/02 13:58

_id	diss_howe
id	diss_howe
authors	Howe, Alan Scott
year	1988
title	A new paradigm for life-cycle management of kit-of-parts building systems
source	UNIVERSITY OF MICHIGAN , PhD
summary	The research described in this dissertation brings together various technologies in manufacturing and information management and suggests a new paradigm for the design, manufacture, and lifetime use of artifacts using kit-of-parts systems and rule-based assembly. The questions are asked: If architects, designers, and users were given direct online connection to real-time design information sources and fabrication processes, and have the ability to monitor and control the current state of designed objects throughout the objects' lifetime, how would the entire life-cycle of a product be affected, and how would design processes change? During the course of the research described in this dissertation, a series of simulations and experiments were conducted which produced a computer-based simulated design, manufacture, and use environment wherein these questions could begin to be answered. A kit-of-parts model building system was devised which could be used to design model buildings in virtual form by downloading virtual representations of the components from the Internet and assembling them into a desired form. The virtual model building could then be used to order the manufacture of real components online, and remotely controlled robots used to assemble the actual building on the site. Through the use of special hardware manufactured into the components, real-time remote monitoring and control of the current state of the finished model building was affected during the building's lifetime. The research establishes the feasibility of an online life-cycle environment where a virtual representation of an artifact is created and used to both manufacture a real-world counterpart and also monitor and control the current state of the real-world object. The state-of-the-art of pertinent technologies were explored through literature searches and experiments. Data representation, rule-based design techniques, robotics, and digital control were studied, and a series of design principles established which lend themselves toward a life-cycle management paradigm. Several case studies are cited which show how the design principles and life-cycle management environment can be applied to real buildings and other artifacts such as vehicles and marine structures. Ideas for expanded research on the life-cycle management paradigm are cited.
series	thesis:PhD
email
more	http://wwwlib.umi.com/dissertations/fullcit/9909905
last changed	2003/11/20 19:57

_id	4da4
authors	Jordan, J. Peter
year	1988
title	ARCH 431: Computer-Aided Design
doi	https://doi.org/10.52842/conf.acadia.1988.187
source	Computing in Design Education [ACADIA Conference Proceedings] Ann Arbor (Michigan / USA) 28-30 October 1988, pp. 187-200
summary	There is a significant variance in the way computer courses are taught at various institutions around the country. Generally, it is useful to think of these courses falling either into a "tool-building" or a "tool-using" category. However, within either category, there is a variety of focus on the application of the "tool". Two courses have been developed at the University of Hawaii at Manoa which deal with computer applications. The first course is more quantitatively oriented, encouraging students to explore ways of dealing with problems in a more complex and substantial manner. This paper deals with the second course whose focus has shifted toward design issues, using the computer as a tool to explore these issues. This course exposes the student, not to training on a specific computer-aided drafting system, but to issues in computer-aided design which include hardware and software systems, human-machine interface, and the nature of the design process. This course seems to be an appropriate model for introducing computer-aided design to undergraduates in a professional design program.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	45d1
authors	Wade, John W.
year	1988
title	A Proposed Model of Perceptual Objects
source	October, 1988. [9] p. : ill. includes bibliography
summary	This paper expands on the General Reference Model for AEC product data (GRM) and suggests the possibility of some changes in the GRM. Accompanying these changes, the paper proposes a model of the perceptual object. It makes an argument for four categories: function, affect, symbol, and order, based in the different person-object relations that can occur. The paper proposes their further development and inclusion in the GRM
keywords	standards, modeling, objects, perception, architecture, design
series	CADline
last changed	2003/06/02 13:58

_id	8c9e
authors	Zohar, Ruth and Shaviv, Edna
year	1988
title	A Decision-Making Model for Optimizing Solar Retrofit : Solar Vis-A-Vis Conservation
source	1988? pp. [5] : ill. : tables. includes bibliography
summary	A decision making model for selecting the optimal or quasi optimal solar retrofit design solutions for low-income residential buildings is presented. The model can serve the architect as a tool and provide guidance on how to improve the building's thermal performance during the different design stages. The model allows him to consider the contribution of energy conservation solutions vis-a-vis solar energy gains solutions based on accumulating knowledge of design precedents. It also allows the use of different strategies for searching the solutions that best fits the different design stages. The sensitivity of the suggested decision making model was checked and satisfactory results obtained
keywords	decision making, energy, architecture, optimization, conservation, simulation, precedents, knowledge
series	CADline
email
last changed	2003/06/02 10:24

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2006_paper8
id	ascaad2006_paper8
authors	Abdullah, Sajid; Ramesh Marasini and Munir Ahmad
year	2006
title	An Analysis of the Applications of Rapid Prototyping in Architecture
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Rapid prototyping (RP) techniques are widely used within the design/manufacturing industry and are well established in manufacturing industry. These digital techniques offer quick and accurate prototypes with relatively low cost when we require exact likeness to a particular scale and detail. 3D modeling of buildings on CAD-systems in the AEC sector is now becoming more popular and becoming widely used practice as the higher efficiency of working with computers is being recognized. However the building of scaled physical representations is still performed manually, which generally requires a high amount of time. Complex post-modernist building forms are more faithfully and easily represented in a solid visualization form, than they could be using traditional model making methods. Using RP within the engineering community has given the users the possibility to communicate and visualize designs with greater ease with the clients and capture any error within the CAD design at an early stage of the project or product lifecycle. In this paper, the application of RP in architecture is reviewed and the possibilities of modeling architectural models are explored. A methodology of developing rapid prototypes with 3D CAD models using methods of solid freeform manufacturing in particular Fused Deposition Modeling (FDM) is presented and compared against traditional model making methods. An economical analysis is presented and discussed using a case study and the potential of applying RP techniques to architectural models is discussed.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	c304
authors	Barber, T.and Hanna, R.
year	1998
title	Appraisal of Design Studio Methodologies
doi	https://doi.org/10.52842/conf.caadria.1998.021
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 21-30
summary	This paper investigates the relationship between different design approaches and their effectiveness in the formulation of design concepts. This inquiry will focus on the computer as the sole design and developmental tool. The research employs a short design programme, a small building with a given urban site, as its investigative vehicle. Nineteen second year students of the Mackintosh School of Architecture were monitored and their design progress evaluated. They were split into two groups: one used CAD and AEC as the only drawing and modelling tool, tutorial and review, and another used conventional tools of drawing and model making (mixed media). Structured interviews and personal observations were used as a means for data collection. Questionnaires were administered to students and their response was analysed using the statistical programme SPSS (Statistical Package for the Social Sciences). The Mann-Whitney test was used to test the Null Hypothesis that different design approaches will not produce different design outcomes. Correlation, Regression and the X2 test of independence were also employed to screen data and identify patterns of relationships.
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:54

_id	0c88
authors	Bedell, John R. and Kohler, Niklaus
year	1993
title	A Hierarchical Model for Building Applications
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 423-435
summary	Advanced computer-aided architectural applications must model buildings as multi-level compositions supporting distinct points of view. Hierarchies of encapsulated, autonomous elements can be derived from ISO-STEP's General AEC Reference Model and configured for various applications. For analysis of life-cycle costs, we define a Pyramid of evaluable production steps leading to the final building; for optimization of renovation task schedules, a topological model of access paths and traffic flow. These separate viewpoints can be embedded in a single unifying structure permitting the communication and propagation of changes among its specialized aspects.
keywords	Design Model, Decision Support System, Object-Oriented Data Model, Building Product Model, STEP-GARM
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	ijac201210406
id	ijac201210406
authors	Biswas, Tajin; Ramesh Krishnamurti
year	2012
title	Data Sharing for Sustainable Building Assessment
source	International Journal of Architectural Computing vol. 10 - no. 4, 555-574
summary	Sustainable design assessment requires information, which is aggregated from different phases of a building design, and evaluated according to criteria specified in a ‘sustainable building rating system.’ In the architecture engineering and construction (AEC) domain much of the necessary information is available through open source data standards such as Industry Foundation Classes (IFC). However, no single standard that provides support for sustainability assessment completely suffices as a data structure. This paper explores the augmentation of the Construction Operations Building information exchange (COBie) model, as an intermediary data structure, to bridge between requirements of the Leadership in Energy and Environmental Design (LEED) rating system and a building information model. Development of a general framework for data sharing and information management for LEED assessments is illustrated through an implementation of a prototype using functional databases.The prototype checks and augments available data as needed, which is used to populate LEED submission templates.
series	journal
last changed	2019/05/24 09:55

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	f9e5
authors	Cherneff, Jonathan Martin
year	1990
title	Knowledge Based Interpretation of Architectural Drawings
source	Massachusetts Institute of Technology, Department of Civil Engineering, Cambridge, MA
summary	Architectural schematic drawings have been used to communicate building designs for centuries. The symbolic language used in these drawings efficiently represents much of the intricacy of the building process (e.g. implied business relationships, common building practice, and properties of construction materials). The drawing language is an accepted standard representation for building design, something that modern data languages have failed to achieve. In fact, the lack of an accepted standard electronic representation has hampered efforts at computer intergration and perhaps worsened industry fragmentation. In general, drawings must be interpreted, by a professional, and then reentered in order to transfer them from one CAD system to another. This work develops a method for machine interpretation of architectural (or other) schematic drawings. The central problem is to build an efficient drawing parser (i.e. a program that identifies the semantic entitites, characteristics, and relationships that are represented in the drawing). The parser is built from specifications of the drawing grammar and an underlying spatial model. The grammar describes what to look for, and the spatial model enables the parser to find it quickly. Coupled with existing optical recognition technology, this technique enables the use of drawings directly as: (1) a database to drive various AEC applications, (2) a communication protocol to integrate CAD systems, (3) a traditional user interface.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	disschoo
id	disschoo
authors	Choo, Seung Yeon
year	2004
title	STUDY ON COMPUTER-AIDED DESIGN SUPPORT OF TRADITIONAL ARCHITECTURAL THEORIES
source	Technische Universität München
summary	The research presented in this thesis describes a computer-aided design support of traditional architectural theories. Traditional architectural theories in western architecture have been considered as a basis for answering the fundamental questions of architecture: proportion, symmetry, colour, harmony and so on. In particular, the aesthetic aspect of these theories has been one of many important architectural aspects, and which is concerned with the field of architecture in determining the beauty of architectural form. The most significant role of the traditional theories in architecture is to maintain unity, to avoid chaos and then to achieve harmony in a design, using some specific design principles. However, current technology-guided constructions tend to neglect often the importance of these theories due to the standardization of building elements, due to mechanically-prepared construction and the reducing completion costs, etc. Thus, this research proposes a design support system as a design assistant that gives an intelligent advice on architectural design, using analytical design- and ordering- principles of traditional theories for the optimization of the architectural design from the aesthetic perspective. To evaluate the aesthetic quality of an architectural design, this system is implemented in the AutoCAD environment, using the AutoLISP. It is applied so as to explain and develop aesthetic qualities of a design. Designs proposed by this system include optimum designs, which are based on the traditional architectural theories, and new ones which can be in future connected to information models. To do this, the definition of information about building elements is accomplished by using the neutral format EXPRESS and EXPRESS-G for such application systems. The results of the application system are presented, such as the easily generating and quickly conceptualising of an object model, the checking of the aesthetic value of the design during the various design phases, the helping to find direction during rational searching for a solution. The user can easily appreciate the usefulness of the proposed system as a set of tools for searching for rational architectural aesthetics and formal solutions at different design-stages. It is to be hoped that a new "traditional" fundamental of architecture, such as the proposed system, incorporating CAAD systems, will find its place among new technological methods in the AEC industry and so help to bridge the gap between the value of traditional architecture and CAAD systems.
keywords	Aesthetics, Design Theory, Order Principle, Product Model, IFC, AutoCAD/AutoLISP
series	thesis:PhD
type	normal paper
email
more	http://tumb1.biblio.tu-muenchen.de/publ/diss/ar/2004/choo.html
last changed	2004/05/23 07:05

_id	ecaade2023_350
id	ecaade2023_350
authors	Coraglia, Ugo Maria, Wurzer, Gabriel and Bragadin, Marco Alvise
year	2023
title	A Methodological Approach to represent Climate Change Impacts on Buildings
doi	https://doi.org/10.52842/conf.ecaade.2023.2.227
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 227–236
summary	The main aim of the research is to propose a methodological approach to permit an assessment of the climate change impacts on buildings and their lifecycle, also by making the process computable. Climate change is a problem that designers and professionals in the AEC sector have begun to tackle more consistently and intensively in recent years. From the perspective of building sustainability in its entire life cycle, in fact, the problem of changing conditions in which the building 'lives' cannot be ignored, since many times they can be completely different from those in which it was designed and built. Recent research has shown how the use of BIM models, more systematic and relevant in the last few years, can be one of the best strategies for the management of new constructions and renovations in the different phases that characterise a building, from its design to its realisation and up to its renovation or change of use. That is not only due to the accurate 3D model, but especially thanks to the considerable availability of data and information related to the Building Object in question. The management of the simulation through a game engine, on the other hand, allows the user to live a direct experience in real-time. In this research, therefore, through the use of BIM models (Autodesk Revit) as a database (DB) of building-related data and combined and enriched with those obtained from other DBs from case studies and literature, it is possible to obtain a useful database which allows, through algorithms implemented within a game engine (Unity 3D), to visualise existing problems according to the date of construction and/or renovation.
keywords	Climate change, BIM, Impacts, Building, Game Engine
series	eCAADe
email
last changed	2023/12/10 10:49

For more results click below: