Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 15146

Reformat results as: short short into frame detailed detailed into frame

_id	f500
authors	Almeida Sampaio, A.
year	1999
title	Automation of Deck Bridge Representations
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 69-79
summary	The bridge deck has a apparent simple shape, but it is the result of an adequate combination of two longitudinal geometric components: the deck shape evolution along de longitudinal section the layout of the road, that acts in simultaneous over a cross section, defining the deck exact shape. A geometric modelling computer programme was developed for box girder decks, allowing the generation of cross sections along the deck, defined with correct shape and location. In the elaboration of the deck plan drawings, the geometric information of the real deck shape is required. This information is not managed in an integrated and automatic way. On the creation of these drawings, directly executed over a graphic system, the time consumed is considerable and it is easy to comet errors. This paper describes the drawing module included in the computer program refereed. The deck plan projections are obtained, in DXF format drawing files, using the geometric information obtained from 3D-deck model. Using the drawing module it is possible to generate the usual deck drawings required in bridge design process. Then, his module is a great support for the design process within its geometric design stage.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	sigradi2017_015
id	sigradi2017_015
authors	Almeida, Adriane Borda; Juçara Nunes da Silva
year	2017
title	Referenciais Didáticos de Arquitetura a partir de Gaudí e Gehry: Entre Forças e Fraquezas, Ameaças e Oportunidades [Didactic References of Architecture from Gaudí and Gehry: Between Strengths and Weaknesses, Threats and Opportunities]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.114-122
summary	The challenges on the ways of producing and teaching architecture, in the face of new digital technologies, led us to develop guidelines for updating didactic strategies in the area of teaching geometry and graphic representation in architecture courses. In order to do so, it is proposed to use the SWOT matrix as a way to cross-check what is being discussed. To identify the factors of the matrix, in the research environment we identify Opportunities and Threats and, using as examples the works of the Sagrada Familia Temple and the Guggenheim Museum, we identify Strenghts and Weaknesses.
keywords	Geometry; Design; Technologies of Representation; Didactic Speech.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1535
id	sigradi2018_1535
authors	Almeida, Caio; Brandão, Guilherme; Lima, Fernando; Borges, Marcos
year	2018
title	Spatial Proxemics: experiments and contributions of anthropological relationships in digital media
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1279-1284
summary	Proxemics was first defined by Edward. T. Hall as being the relations between non-verbal communications in a determined space. This paper aims to promote a theoretical interpolation between diverse study fields with new contemporary urbanism paradigms supported by technology and anthropological relations. In this optics, to provide a better understanding of possible characteristics within the proxemics theory can translate into a better spatial understanding and city improvement from an analysis methodology using digital tools.
keywords	Proxemics; Architecture; Urbanism; Phenomenology; Digital space
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2015_2.162
id	sigradi2015_2.162
authors	Almeida, Fernando; Andrade, Max
year	2015
title	GIS as a catalyst tool for Smart Cities
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 46-50.
summary	Every building has its individual and measurable role on resources consumption, waste generation and neighborhood impact within a city, and tracking this behavior is an essential task for establishing a sustainable path into a Smart City model. This paper preliminarily investigates how GIS can contribute in creating an integrated and dynamic system built to attend public utilities and urban management offices for parameters at various scales.
keywords	GIS, Smart Cities, Urban Infrastructure, Public Services, Urban Management
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2009_890
id	sigradi2009_890
authors	Almeida, Fábio de
year	2009
title	Documentação e Comunicação Digital do Patrimônio Arquitetônico Moderno: Centro Técnico de Aeronáutica – CTA [Documentation and Communication Digital Architectural Heritage Classic: Aerospace Technical Center - CTA]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This paper intends to contribute for the analysis of the digital representation applied for documentation, communication and diffusion of architecture as cultural heritage, more specifically the production and communication of informations about buildings and sites of modern movement, arguing the possibilities and limits of this instrumental for the best understanding, recognition, evaluation and diffusion of the architecture on a historiographical perspective. As studies of cases, were selected buildings of an important technical center of aeronautic of Brazil, the CTA (Centro Técnico de Aeronáutica) in São José dos Campos, State of São Paulo.
keywords	surveying and reconstruction; Digital Heritage; Modern Movement
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2021_399
id	caadria2021_399
authors	Alsalman, Osama, Erhan, Halil, Haas, Alyssa, Abuzuraiq, Ahmed M. and Zarei, Maryam
year	2021
title	Design Analytics and Data-Driven Collaboration in Evaluating Alternatives
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 101-110
doi	https://doi.org/10.52842/conf.caadria.2021.2.101
summary	Evaluation of design ideas is an important task throughout the life cycle of design development in the AEC industry. It involves multiple stakeholders with diverse backgrounds and interests. However, there is limited computational support which through this collaboration is facilitated, in particular for projects that are complex. Current systems are either highly specialized for designers or configured for a particular purpose or design workflow overlooking other stakeholders' needs. We present our approach to motivating participatory and collaborative design decision-making on alternative solutions as early as possible in the design process. The main principle motivating our approach is giving the stakeholders the control over customizing the data presentation interfaces. We introduce our prototype system D-ART as a collection of customizable web interfaces supporting design data form and performance presentation, feedback input, design solutions comparisons, and feedback compiling and presentation. Finally, we started the evaluation of these interfaces through an expert evaluation process which generally reported positive results. Although the results are not conclusive, they hint towards the need for presenting and compiling feedback back to the designers which will be the main point of our future work.
keywords	Design Analytics; Collaboration; Visualizations
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2013_262
id	caadria2013_262
authors	Alston, Mark E.
year	2013
title	Space Emergent Field
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 715-724
doi	https://doi.org/10.52842/conf.caadria.2013.715
wos	WOS:000351496100070
summary	Architecture has always been founded upon ideologies. However could the influence of human interactions create a new perspective for space form evolution? To create a spatial adaptive system, to the influence of culture and behaviour of human being? The output of this spatial system is the determination of optimised values for spatial configurations by biomolecular, self-assembly computation for emergent spatial forms.
keywords	Spatial, Adaptive, Biomolecular computations, Self-assembly
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	7c56
authors	Alvarado, R.G., Parra Marquez, J.C. and Vildosola, G.V.
year	2001
title	Qualitative contribution of a vr-system to architectural design: Why we failed?
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 423-427
doi	https://doi.org/10.52842/conf.caadria.2001.423
summary	The paper exposes the development of a Virtual-Reality system for modeling timber structures, and evaluations with students about its contribution to the architectural project.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2014_221
id	sigradi2014_221
authors	Alvarado, Rodrigo Garcia; Enzo Beretta, Danitza Pereira, Lautaro Siva, Juan Carlos Parra Marquez, Ignacio Bisbal
year	2014
title	Visualizacion simultánea de transformaciones urbanas [Simultaneous Visualization of Urban Transformations]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 524-526
summary	This paper proposes a novel strategy for modeling three-dimensional sections of the city and create visual presentations, especially in places that have had transformations architectural projects. Through a simultaneous display method in parallel by 3D screens to expose temporal sequences, and verify residents’ understanding of these environments and their spatial changes.
keywords	Virtual Modeling; 4D Representation; Urban Design; Public Participation,
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_8.81
id	sigradi2015_8.81
authors	Alvarado, Rodrigo García; Lobos, Danny; Nope, Alberto; Tinapp, Frank
year	2015
title	BIM + UAV Assessment of Roofs’ Solar Potential
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 336-340.
summary	This paper describes a novel method for determining the capacity to generate solar energy integrated into the roofs of buildings by aerial survey using UAVs and BIM models for sizing the covering surfaces and integration of solar panels. Various digital procedures are enchained like planning of trajectories, image processing, geometric reconstitution, simulation of solar radiation and calculation of energy generation to promote on-site installation of clean energy sources in existing buildings, to ensure a more sustainable habitat.
keywords	BIM, UAV, Solar Energy, Sustainable Building
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia19_490
id	acadia19_490
authors	Alvarez, Martín; Wagner, Hans Jakob; Groenewolt, Abel; Krieg, Oliver David; Kyjanek, Ondrej; Sonntag, Daniel; Bechert, Simon; Aldinger, Lotte; Menges, Achim; Knippers, Jan
year	2019
title	The Buga Wood Pavilion
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 490-499
doi	https://doi.org/10.52842/conf.acadia.2019.490
summary	Platforms that integrate developments from multiple disciplines are becoming increasingly relevant as the complexity of different technologies increases day by day. In this context, this paper describes an integrative approach for the development of architectural projects. It portrays the benefits of applying such an approach by describing its implementation throughout the development and execution of a building demonstrator. Through increasing the agility and extending the scope of existing computational tools, multiple collaborators were empowered to generate innovative solutions across the different phases of the project´s cycle. For this purpose, novel solutions for planar segmented wood shells are showcased at different levels. First, it is demonstrated how the application of a sophisticated hollow-cassette building system allowed the optimization of material use, production time, and mounting logistics due to the modulation of the parameters of each construction element. Second, the paper discusses how the articulation of that complexity was crucial when negotiating between multiple professions, interacting with different contractors, and complying with corresponding norms. Finally, the innovative architectural features of the resulting building are described, and the accomplishments are benchmarked through comparison with typological predecessor.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2003_096
id	sigradi2003_096
authors	Alvarez, Valeria and Albero, Constanza
year	2003
title	Una rama en la arquitectura de la era digital (A branch in architecture of the digital age)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	Genetic information determines the germ of life, the first idea, that encloses all the power of creation. In every "germ" lays the identity, the strength to seek and fulfill expression in form. History, technical and scientific progress require new answers and provide new tools while encouraging investigation. A "Branch", a simple nature element, is reinterpreted into bits of information, reconstructed after being apprehended. This process reveals new elements that could have never been conceived with traditional methods. Nature and Technology complement each other in an embriological growing system that provides a new concept in the construction of real spaces.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2018_1300
id	sigradi2018_1300
authors	Alves de Almeida, Marcela; de Souza Nogueira, Yasmim
year	2018
title	Parametricism as style: the relationship between methodology of scientific research programmes and parametric design
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 17-22
summary	During the 1990s many architects, who dissociated from critical theory, were looking for new design methodologies that did not confine themselves as stylistic currents. One of these propractice movement is done by means of parametric design. Aiming to investigate the boundaries between methodology and style, this paper proposes to answer the question: does the parametric architecture constitute a new style, as Patrik Schumacher says? It reviews Heinrich Wölfflin concept of style in the contemporary context; it presents Imre Lakatos theory (methodology of scientific research programmes) and how Schumacher appropriates of it followed by a critical reflection on the limits of such appropriation.
keywords	Parametric design; Style
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_009
id	sigradi2017_009
authors	Alves de Oliveira, Amanda Aline; Tatiana Sakurai
year	2017
title	Fabricação digital e DIY: Pesquisa de soluções para a criação de um mobiliário nômade [Digital fabrication and DIY: Research of solutions for the creation of a nomadic furniture]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.67-74
summary	This article reflects about creation, through the analysis of joints and furniture that are easily assembly and disassembly destined for young people in constant territorial displacement situations. Obtained by digital fabrication in the largest public network of free Fab Labs in the world, which is provided by the City Hall of São Paulo and the maker culture present in these units. Thus, are used, bibliographic and iconographic analysis and drawings for a better understanding of this furniture that had as reference for the analysis the following books: Nomadic Furniture volumes 1 and 2 written by Victor Papanek and James Hennessey.
keywords	Disassembly; Joints; Digital manufacturing; Furniture; Mobility
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1484
id	sigradi2018_1484
authors	Alves de Oliveira, Amanda Aline; Sakurai, Tatiana
year	2018
title	The transformations of the "Do-It-Yourself" culture and the context provided by digital manufacturing in furniture design
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1258-1263
summary	This article seeks to deal with the evolution of the DIY culture during its most important periods for the history of furniture and confers great importance to the present reality that provides the constitution of these artifacts through digital manufacturing. Thus, issues such as the quality of what has been produced and even the relevance of design professionals of the culture of making in the digital era are treated.
keywords	DIY; Digital fabrication; Furniture; Fab Labs Livres SP
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2013_117
id	sigradi2013_117
authors	Alves Veloso, Pedro L.; Anja Pratschke
year	2013
title	Uma Arqueologia de Diagramas Cibernéticos [An Archaeology of Cybernetic Diagrams]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 353 - 356
summary	This paper investigates the use of explicit structures of information in architectural design. Particularly, it approaches the use of diagrams related to cybernetics and information theory in experimental practices in the 1960’s and 1970’s. It analyses the diagram of cybernetic control proposed by the cybernetician Gordon Pask for the Fun Palace, the diagrams produced by the utopian architect Yona Friedman in the conceptual description of the Flatwriter program and Christopher Alexander’s diagrams and his theories of Synthesis of Form and Pattern Language. Finally it establishes a brief parallel between current domestication and use of dataflow programming with the cybernetic diagrams, highlighting differences in their complexity approach.
keywords	Dataflow diagrams; Cybernetics; Complexity
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_128
id	sigradi2014_128
authors	Alves Veloso, Pedro Luís
year	2014
title	Explorando o diagrama de bolhas [Exploring the bubble diagram]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 115-119
summary	This paper presents an interactive bubble diagram developed to support design exploration. The proposed diagram consists of multiple goal-oriented agents, whose interaction with the user stimulates the analysis and exploration of new spatial patterns. Until now, there are two versions implemented. The first was developed combining scripting language and a graphical editor of algorithms embedded in modeling software. The second was developed with event-driven programming techniques emphasizing functions to amplify the interaction between user and agents. Finally, as the result of this exploratory stage of the research, we propose new paths of development for the next versions of the diagram.
keywords	Architectural design; bubble diagram; graph; interaction
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2009_775
id	sigradi2009_775
authors	Alves, Andressa Schneider; José Luis Farinatti Aymone
year	2009
title	Modelagem 3D e animação para o desenvolvimento de um modelo virtual interativo em realidade virtual (VRML) na área de moda [3D modeling and animation for the development of an interactive virtual model in virtual reality (VRML) in fashion ]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This article describes the development of a project that combines modeling and animation of three-dimensional objects (virtual model, clothing, environment) in the software 3D Studio Max with VRML (Virtual Reality Modeling Language). The project allows various interactions between the user and the environment developed. The main interaction is the choice of clothing, in which different parts can be proven in the virtual model. The results can be applied to online sales, marketing strategies and 3D virtual simulation.
keywords	Modelagem tridimensional; Animação; Realidade Virtual; Moda; Fashion Design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_108
id	sigradi2014_108
authors	Alves, Gilfranco Medeiros; Anja Pratschke
year	2014
title	De Uexküll à Pask: a Conversação aplicada à Processos Digitais de Projeto [From Uexküll to Pask: Conversation applied to Didital Design Process]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 82-85
summary	The paper will present one specific aspect of the PhD research called Cibersemiótica e Processos de Projeto: Metodologia em Revisão, funded by FAPESP, which in turn is linked to the Nomads.usp research group of the University of São Paulo. The paper discusses the relevance of communication and information management in the digital design processes from the synchronic study of concepts such as feedback loop, control and self-regulation. These concepts are present in both biosemiotic and interactive design of functional cycle proposed in 1934 by biologist Jakob von Uexküll, as in cybernetic development proposed by Gordon Pask in his sophisticated Conversation Theory in the early 1970’s.
keywords	Biosemiotics; Cybernetics; Cybersemiotics; Conversation Theory; functional cycle;
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: