Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1900

Reformat results as: short short into frame detailed detailed into frame

_id	82b9
authors	Beyers, Robert and Desa, Subhas
year	1989
title	Design of Control Systems for Performance : A Constraint Mapping Approach
source	17 p. : ill Engineering Design Research Center, CMU, October, 1989. EDRC 24-10-89. includes bibliography.
summary	Simple s-plane maps are used to graphically reveal interactions of performance requirements and constraints thus providing a control system designer insight into performance trade-offs. Two well-known but powerful ideas underlie this approach: (a) the characteristic equation of an nth-order system can be fully described by the specification of n variables and (b) any dynamic performance requirement or constraint can be expressed in terms of 2n variables of which n describe the open-loop and n describe the closed-loop characteristic equations. An example illustrates the application of the approach to controller design
keywords	constraints, engineering, control, systems, design, performance
series	CADline
last changed	2003/06/02 13:58

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	47e8
authors	Pikaar, R.N.
year	1998
title	Situation Analysis of Design Tasks for CAD Systems
source	Behaviour and Information Technology 1989 v.8 n.3 p.191-206
summary	There has been little empirical research on the human aspects of CAD systems. In this paper observations on the analyses of designer activities are presented, by using a systems design approach. The paper concentrates on situation analysis and subsequent allocation of system tasks. A situation analysis was carried out in two design departments. The analysis consisted of a formal system description and a reconstruction interview. During the interview the previous week's activities were reconstructed with the help of photographs of the drawing board and protocols completed by design draughtspersons. This procedure was used for six design projects. In this study the technique of the reconstruction interview proved to be very useful and informative, and enabled three general conclusions to be made. First, designers liked the initial design phase and their responsibility for the final result. Second, they disliked the activities associated with drawing as well as the project documentation phase. Third, they preferred to work with two or more drawings on the drawing board. A number of frequent tasks could be identified, for example, large scale manipulation within and between drawings. In the final section, an example of a global allocation of system tasks for the design of a CAD system is given.
series	other
last changed	2002/07/07 16:01

_id	1920
authors	Riesbeck, C. and Schank, R.C.
year	1989
title	Inside Case-based Reasoning
source	Lawrence Erlbaum Associates, Hillsdale, NJ
summary	Case-based reasoning, broadly construed, is the process of solving new problems based on the solutions of similar past problems. An auto mechanic who fixes an engine by recalling another car that exhibited similar symptoms is using case-based reasoning. A lawyer who advocates a particular outcome in a trial based on legal precedents is using case-based reasoning. It has been argued that case-based reasoning is not only a powerful method for computer reasoning, but also a pervasive behavior in everyday human problem solving. Case-based reasoning (CBR) has been formalized as a four-step process:N 1. Retrieve: Given a target problem, retrieve cases from memory that are relevant to solving it. A case consists of a problem, its solution, and, typically, annotations about how the solution was derived. For example, suppose Fred wants to prepare blueberry pancakes. Being a novice cook, the most relevant experience he can recall is one in which he successfully made plain pancakes. The procedure he followed for making the plain pancakes, together with justifications for decisions made along the way, constitutes Fred's retrieved case. 2. Reuse: Map the solution from the previous case to the target problem. This may involve adapting the solution as needed to fit the new situation. In the pancake example, Fred must adapt his retrieved solution to include the addition of blueberries. 3. Revise: Having mapped the previous solution to the target situation, test the new solution in the real world (or a simulation) and, if necessary, revise. Suppose Fred adapted his pancake solution by adding blueberries to the batter. After mixing, he discovers that the batter has turned blue -- an undesired effect. This suggests the following revision: delay the addition of blueberries until after the batter has been ladled into the pan. 4. Retain: After the solution has been successfully adapted to the target problem, store the resulting experience as a new case in memory. Fred, accordingly, records his newfound procedure for making blueberry pancakes, thereby enriching his set of stored experiences, and better preparing him for future pancake-making demands. At first glance, CBR may seem similar to the rule-induction algorithmsP of machine learning.N Like a rule-induction algorithm, CBR starts with a set of cases or training examples; it forms generalizations of these examples, albeit implicit ones, by identifying commonalities between a retrieved case and the target problem. For instance, when Fred mapped his procedure for plain pancakes to blueberry pancakes, he decided to use the same basic batter and frying method, thus implicitly generalizing the set of situations under which the batter and frying method can be used. The key difference, however, between the implicit generalization in CBR and the generalization in rule induction lies in when the generalization is made. A rule-induction algorithm draws its generalizations from a set of training examples before the target problem is even known; that is, it performs eager generalization. For instance, if a rule-induction algorithm were given recipes for plain pancakes, Dutch apple pancakes, and banana pancakes as its training examples, it would have to derive, at training time, a set of general rules for making all types of pancakes. It would not be until testing time that it would be given, say, the task of cooking blueberry pancakes. The difficulty for the rule-induction algorithm is in anticipating the different directions in which it should attempt to generalize its training examples. This is in contrast to CBR, which delays (implicit) generalization of its cases until testing time -- a strategy of lazy generalization. In the pancake example, CBR has already been given the target problem of cooking blueberry pancakes; thus it can generalize its cases exactly as needed to cover this situation. CBR therefore tends to be a good approach for rich, complex domains in which there are myriad ways to generalize a case.
series	other
last changed	2003/04/23 15:14

_id	c5a8
authors	Schmitt, Gerhard N. (Ed.)
year	1991
title	CAAD Futures '91 [Conference Proceedings]
source	International Conference on Computer-Aided Architectural Design 1989/ ISBN 3-528-08821-4 / Zürich (Switzerland), July 1991, 594 p.
summary	Computer Aided Architectural Design (CAAD) is the art of design and computation. Since the establishment of the CAAD futures organization in 1985, experts meet every two years to explore the state-of-the-art and postulate on future development in Computer Aided Architectural Design. The fourth international CAAD futures conference took place in July 1991 in Zürich at the Swiss Federal Institute of Technology (ETH Zürich), organized by the Chair for CAAD. More than 220 participants from 25 countries attended the conference. Presentation topics were education, research, and application. The mission of CAAD futures '91 was to provide an international forum for the dissemination and discussion of future oriented developments and new experiences in the field of Computer Aided Architectural Design. This book is one result of the conference and is divided into three sections: Education, Research and Application. This international overview of the 1991 state-of-the- art in Computer Aided Architectural Design will serve as a reference for design teachers, researchers, and application developers interested in CAAD.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	sigradi2017_015
id	sigradi2017_015
authors	Almeida, Adriane Borda; Juçara Nunes da Silva
year	2017
title	Referenciais Didáticos de Arquitetura a partir de Gaudí e Gehry: Entre Forças e Fraquezas, Ameaças e Oportunidades [Didactic References of Architecture from Gaudí and Gehry: Between Strengths and Weaknesses, Threats and Opportunities]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.114-122
summary	The challenges on the ways of producing and teaching architecture, in the face of new digital technologies, led us to develop guidelines for updating didactic strategies in the area of teaching geometry and graphic representation in architecture courses. In order to do so, it is proposed to use the SWOT matrix as a way to cross-check what is being discussed. To identify the factors of the matrix, in the research environment we identify Opportunities and Threats and, using as examples the works of the Sagrada Familia Temple and the Guggenheim Museum, we identify Strenghts and Weaknesses.
keywords	Geometry; Design; Technologies of Representation; Didactic Speech.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	6651
id	6651
authors	Chen, N., Kvan, T., Wojtowicz, J., Van Bakergem, D., Casaus, T., Davidson, J., Fargas, J., Hubbell, K., Mitchell, W., Nagakura, T. and Papazian, P.
year	1994
title	PLACE, TIME AND THE VIRTUAL DESIGN STUDIO
doi	https://doi.org/10.52842/conf.acadia.1994.115
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 115-132
summary	A design problem shared over the Internet raises issues of how digital media and group dynamics affect networked design collaborations. This paper describes how to conduct a long-distance studio and compares asynchronous and synchronous collaborative techniques. Digital methods are discussed in relationship to both the creative process and design communication. In schematic stages, less precise tools used asynchronously allow free exploration and creative misreadings, while in later stages, more direct real-time exchanges bring a project to resolution. For the final review, synchronous video-conferencing with interactive graphics allow comparison of cross-cultural differences. Used effectively, these tools can electronically create a compelling sense of place. Ways to foster a strong virtual community are discussed in an agenda for future virtual design.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	8d2b
id	8d2b
authors	Cross, N. and Maver, T.W.
year	1973
title	Computer Aids for Design Participation
source	Architectural Design, vol XL 111, 5, 274
series	journal paper
email
last changed	2003/09/06 08:41

_id	f610
authors	Duarte, D.L. and Snyder , N.T. (ed.)
year	1999
title	Mastering Virtual Teams
source	Jossy-Bass Publishers
summary	The original edition of Mastering Virtual Teams offered a first-of-its-kind tool kit for leaders and members of virtual teams. Now, this revised and expanded second edition includes a CD-ROM packed with useful resources that allow virtual teams to access and use the book's many checklists, assessments, and other practical tools quickly and easily. The authors provide updated guidelines, strategies, and best practices for working cross-culturally and cross-functionally, across time and distance, to see a project through. The useful tools, exercises, and real-life examples show how anyone can master the unique dynamics of virtual team participation in an environment where the old rules no longer apply.
series	other
last changed	2003/04/23 15:14

_id	sigradi2006_c056b
id	sigradi2006_c056b
authors	Díaz Bonilla, Jaime; Marchant, Hernán and Vergara, Mariana
year	2006
title	Hacia una lógica de incorporación de los Medios Digitales en la Enseñanza Proyectual [Towards a logical involvement of digital medias in the projective taught]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 142-146
summary	This work shows the development of a digital aids incorporation strategy for the improvement of teaching and learning in the areas of architecture, urbanism, design and geography. Its objective is to present a logical construction for the implementation of formative and computer-based support that allows the development and upkeep of cross-disciplinary and collaborative processes.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	caadria2021_137
id	caadria2021_137
authors	Fattahi Tabasi, Saba, Alaghmandan, Matin and Rafizadeh, Hamid Reza
year	2021
title	Simultaneous effect of form modifications and topology of the bracing system on the structural performance of timber high rise building - Introducing an innovative approach using parametric design
doi	https://doi.org/10.52842/conf.caadria.2021.1.421
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 421-430
summary	Topology optimization is a tool that minimizes the material consumption in a structure, while at the same time provides us design alternatives integrating architectural and structural engineering concepts. However, topology optimization is a structural engineering subject and its known methods are required professional knowledge of engineering to be used. In this article, the mutual effect of form modifications and topology of the bracing system in a 9-story timber exoskeleton high-rise building regarding the governing wind load and seismic load is examined. What differentiates this study from former ones and in fact its main purpose is introducing an innovative approach towards structural topology optimization using parametric design. In this innovative approach, the possibility of moving for each central node of bracing systems in defined ranges independently and the possibility of the existence or absence of each bracing member is provided. This parametric model will enable architects to optimize the topology of the structural elements which are part of their architectural design by themselves. The CMA-ES-algorithm-based optimization is done to minimize both total mass of structure per unit area and the horizontal displacement of the top floor. For modeling, optimizing cross-sections and structural analysis, Grasshopper and its plug-in called Karamba are utilized.
keywords	Topology optimization; Form finding; Parametric design; Timber tall buildings; Exoskeleton structures
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2016_409
id	sigradi2016_409
authors	Feinsilber, Sebastián
year	2016
title	Crowdthinking para el desarrollo de PyMEs exportadoras de productos de consumo masivo [Crowdthinking for the development of SME exporters of consumer products]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.897-901
summary	This article links the concept of crowdthinking from the perspective of graphic design and its interface with other disciplines in the development of the Argentine export sector. How do the symbolic, functional and economic aspects influence in the added value of the product? And how does the interaction between disciplines generate this added value from a crowd-thinking perspective? How did Graphic Design develope from its productive methodologies? The work aims to critically theorise on current interfaces and links between disciplines in Argentine companies to develop communication from cross-border products, focusing on the different actors involved, production processes and work methods.
keywords	Cross-border trade; Crowdthinking; Graphic design; SME exporters; Interdisciplinary
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2008_048
id	ecaade2008_048
authors	Gün, Onur Yüce
year	2008
title	Anti UV: Progressive Component Design in Cross Platforms
doi	https://doi.org/10.52842/conf.ecaade.2008.069
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 69-76
summary	The executive power of computation, once utilized to inform the discrete pieces of design, ‘component making’ rapidly became one of the trends in architectural design. Idea of components conceptually transformed the enclosing forms of architecture into subdivision surfaces that act as fields for components to aggregate on. While a certain level of variety is achieved via manipulation of components, the characteristics of the surfaces become overlooked via common use of parametric (UV) subdivision. This paper, with a critical look at the current component field generation techniques, focuses on alternative methods of transforming a surface into a digital ground for component aggregation. Series of studies address and deal with various pitfalls of component design and application on software-dictated UV subdivision surfaces.
keywords	Computation, Components, Emergent, Generative, Progressive
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2016_546
id	sigradi2016_546
authors	Hernández, Silvia Patricia; Boccolini, Sara Maria; Chaves, Cristina; Genero, María Angeles; Mari, Belén; Ron, Lucia
year	2016
title	Trabajo conjunto inter/transdisciplinario para una propuesta concreta que dialoga con la sociedad y su medio. Citycrowdcreating [Cross-disciplinary work for a concrete proposal that interacts with society and the environment. Citycrowdcreating]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.926-930
summary	Working in pairs is collective collaboration. The collective intelligence, crowdthinking and its variations are part of today's language. Based on this concept, we propose to fill empty spaces from the current communication of culture from Goverment of Córdoba. There is an information movement and events in conection to crowd. We propose a device, that broadcasts the contents of the hashtag: #quetenemoshoy, making it more popular, and in everyone's range. We set out a collaboration situation, with a concrete proposal, that includes dialogue with its surroundings. Articulating knowledge from different disciplines, between the goverment and the residents. Following neologism from Gutiérrez-Rubí y Freire (2013),we propose will be CITY-CROWD-CREATING.
keywords	CrowdCreating; Microarchitecture; Inclusive; Communication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2005_a_2c_a
id	caadria2005_a_2c_a
authors	Ivan Redi, Andrea Redi
year	2005
title	A.N.D.I. - A new Digital Instrument for networked creative collaboration in architecture and net.art
doi	https://doi.org/10.52842/conf.caadria.2005.209
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 209-215
summary	A.N.D.I. (A New Digital Instrument), an open source software project, has objective to develop a run-time environment with the focus on the applications for the networked international and cross-disciplinary production in the creative sphere of architecture, urban planning, design and net.art. It is a digital environment which opens the possibilities to generate advanced projects in a networked society. This new working tools will increase the creativity, productivity and competitiveness of the involved actors by drawing upon and developing technologies for virtual, augmented and mixed realities. A.N.D.I. has two basic aspects. On the one hand it is a database driven collaborative environment and on the other hand it will enable the development of future software and tools for networked creative collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2006_101
id	caadria2006_101
authors	IVAN REDI, ANDREA REDI
year	2006
title	A.N.D.I. - A NEW DIGITAL INSTRUMENT: For networked creative collaboration in architecture and net.art
doi	https://doi.org/10.52842/conf.caadria.2006.x.i0a
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 101-110
summary	an open source software project, has objective to develop a run-time environment with the focus on the applications for the networked international and cross-disciplinary production in the creative sphere of architecture, urban planning, design and net.art. It is a digital environment which opens the possibilities to generate advanced projects in a networked society. This new working tools will increase the creativity, productivity and competitiveness of the involved actors by drawing upon and developing technologies for virtual, augmented and mixed realities. A.N.D.I. has two basic aspects. On the one hand it is a database driven collaborative environment and on the other hand it will enable the development of future software and tools for networked creative collaboration.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	bb73
id	bb73
authors	JS Gero and U Kannengiesser
year	2003
title	TEAM EXPERTISE FROM INDIVIDUAL EXPERTISE (THROUGH SOCIAL INTERACTIONS IN COMPUTATIONAL AGENTS)
source	Expertise in Design, N Cross and E Edmonds (eds), University of Technology Sydney, Sydney, pp 311-322.
summary	This paper proposes a model of expertise of temporary design teams. It is based on a situated view of knowledge as being grounded in individual experience, which emphasises its applicability and teleology. The paper describes situated knowledge and expertise using the function-behaviour-structure (FBS) schema. It then outlines how the FBS schema can be used to model expertise of temporary teams as emerging from the interaction of individual experts.
keywords	expertise, teams, function-behaviour-structure, agents
type	paper session
email
last changed	2004/04/10 01:52

_id	ecaade2013_143
id	ecaade2013_143
authors	Kurilla, Lukáš; Achten, Henri and Florián, Miloš
year	2013
title	Scripting Design Supported by Feedback Loop from Structural Analysis
doi	https://doi.org/10.52842/conf.ecaade.2013.1.051
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 51-59
summary	In order to support an architect’s decision to evaluate and choose more efficient structural solutions in the concept design, it is necessary to establish an interactive feedback loop between structural solver and geometry modeller which would allow one to analyse a great number of solutions generated in the scripting design process. Defining a cross-disciplinary data structure as an analytical model, the communication between existing structural solver (OOFEM) and geometry modeller (Grasshopper) was established. Automation of the entire analysis process was done by the bridging tools MIDAS and Donkey, which have been developed. This paper presents the method of creation of an analytical model by Donkey, and deals with how to visualize, interpret and use the result values from the structural analysis.
wos	WOS:000340635300004
keywords	design tool development; computing design; decision-making support methods; finite element method; cross-disciplinary cooperation.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	b719
authors	Maver, T.W.
year	1981
title	Simulation and Solution Teams in Architectural Design
source	Proceedings of Design Participation Conference, (Ed: N Cross), Academy Editions, 79-83
series	other
type	normal paper
email
last changed	2015/02/20 11:25

_id	ab13
authors	Mcfadzean, J., Cross, N. and Johnson, J.H.
year	1999
title	An Analysis of Architectural Visual Reasoning in Conceptual Sketching via Computational Sketch Analysis CSA
source	Proc. International Conference on Information Visualisation, IVí99. IEEE Computer Society, London
summary	Visual reasoning in design is facilitated by sketching. This research investigates how designers sketch, specifically analysing the physical details of mark making. It relates the graphical representations to the abstract cognitive processes of architectural design. A new form of protocol analysis has been developed using video and computer records of designers' sketching activity. The analysis of the resulting data compares the designer's retrospective commentary and interpretations of the sketching activity with the computer's record of that activity. The analysis will lead to a greater understanding of the relationships between 'Design Events' and 'Graphical Events' and thus how the notational activity of sketching supports the cognitive activity of conceptual design.
series	other
last changed	2003/04/23 15:14

For more results click below: