Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2683

Reformat results as: short short into frame detailed detailed into frame

_id	29d2
authors	Barsky, Brian A. and DeRose,Tony D.
year	1989
title	Geometric Continuity of Parametric Curves: Three Equivalent Characterizations
source	IEEE Computer Graphics and Applications. November, 1989. vol. 9: pp. 60-68 : ill. includes bibliography
summary	Geometric continuity of curves has received a good deal of research attention in recent years. The purpose of this article is to distill some of the important basic results into a self-contained presentation. The January 1990 issue of CG&M presents a paper that continues the discussion by offering applications of the theoretical background provided here
keywords	continuity, parametrization, curves, computational geometry, representation
series	CADline
last changed	2003/06/02 13:58

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	09a5
authors	Eastman, Charles M.
year	1989
title	Building Modeling in Architectural Design
source	[8] p. : ill. Design & Computation . Los Angeles: Graduate School of Architecture and Urban Planning, UCLA, 1989? includes bibliography
summary	This paper reviews building modeling from the perspective of U.S. architectural practice. During the previous twenty years of computer-aided architectural design, the underlying paradigm has mimicked a paper-based technology. The future of design, however, is proposed to be in building modeling. A review of building modeling is provided and some prospects for architectural design, based on its concepts, are proposed
keywords	CAD, building, modeling, architecture, design
series	CADline
email
last changed	2003/05/17 10:15

_id	0642
authors	Eastman, Charles M.
year	1989
title	Why Are We Here and Where We are Going: The Evolution of CAD
doi	https://doi.org/10.52842/conf.acadia.1989.009
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 9-26
summary	This paper reviews architectural CAD in terms of its current use, development and status within the U.S. The characteristics of a new generation of architectural CAD system, called building modeling, are outlined. Criteria are developed for the evaluation of CAD systems that support building modeling. Some of the opportunities for universities growing out of building modeling are reviewed, including pedagogical implications and opportunities for research.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	10a5
authors	Edwards, D.M. and Hardman, L.
year	1989
title	Lost In Hyperspace: Cognitive Mapping and Navigation in a Hypertext Environment, Chapter 7
source	Hypertext: Theory Into Practice, Edited by McAleese, Ray., Ablex Publishing Corporation, New Jersey
summary	This paper describes an experiment which looks at how the users of a hypertext document cognitively represent its layout. A document was formed into three different hypertext styles and was presented to the readers, they were then asked a series of questions about information contained in the hypertexts. The way the users found the answers and the time taken was recorded, they were also ask to lay out cards, with reduced versions of the screen on them, on a board and as they thought them to be arranged in the document and also to draw any connecting hypertext links they thought existed between these screens. The users selected for this experiment consisted of 27 university undergraduates 15 male and 12 female with a mean age of 20.5 years with little or no computing experience. They were each assigned one of the three hypertext methods and their performance was recorded. The three methods consisted of a hierarchical, a mixed and an index based method.
series	other
last changed	2003/04/23 15:14

_id	0f73
authors	Ervin, Stephen M.
year	1990
title	Designing with Diagrams: A Role for Computing in Design Education and Exploration
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 107-122
summary	Environmental designers, design educators and design students using computers are a constituency with a set of requirements for database structure and flexibility, for knowledge representation and inference mechanisms, and for both graphical and non-graphical operations, that are now articulatable and to-date largely unmet. This is especially so in the area called 'preliminary' or 'schematic' design, where our requirements are related to, but different from, those of our colleagues in mechanical and electrical engineering, whose needs have dominated the notable developments in this area. One manifestation of these needs is in the peculiar form of graphics called diagrams , and the ways in which environmental designers (architects, landscape architects., urban designers) use them. Our diagrams are both similar to and different from structural, circuit, or logical diagrams in important ways. These similarities and differences yield basic insights into designing and design knowledge, and provide guidance for some necessary steps in the development of the next generation of CAD systems. Diagrams as a form of knowledge representation have received little scrutiny in the literature of graphic representation and computer graphics. In the following sections I present an overview of the theoretical basis for distinguishing and using diagrams; examine some of the computational requirements for a system of computer-aided diagramming; describe a prototype implementation called CBD (Constraint Based Diagrammer) and illustrate one example of its use; and speculate on the implications and potential applications of these ideas in computer-aided design education.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	ecaade03_433_208_froehlich
id	ecaade03_433_208_froehlich
authors	Fröhlich, C., Hirschberg, U., Frühwirth, M. and Wondra, W.
year	2003
title	no_LAb__in_feld - Is common- ground a word or just a sound? (Lou Reed, 1989)
doi	https://doi.org/10.52842/conf.ecaade.2003.433
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 433-436
summary	This paper describes the concept and the current state of development of a new laboratory for digital experimentation in architectural education and research. The novel forms of collaboration and learning for which it is intended and the quick pace of innovation in digital technology on which it depends both require an appropriately flexible spatial and technological framework. And it requires a particular mindset. The no_LAb__in_feld is not just another laboratory. It is a place, a community, a high-tech construction site, a permanent work in progress. It is the prototype of a next generation design studio.
keywords	Design studio education: creative collaboration; digital playground; hybridinteractive installations; augmented reality
series	eCAADe
email
more	http://ikg.tugraz.at/
last changed	2022/06/07 07:50

_id	22ed
authors	Glaser, Migges M.
year	1989
title	ART + COM Lab Report - BERKOM Project "New Media in Urban Planning"
doi	https://doi.org/10.52842/conf.ecaade.1989.x.l1t
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 6.1.1-6.1.6
summary	The highly developed glasfiber technology of the Berlin ISDN-B prototype network will make it possible to test a future benefit of the possibilities of real time visual communication for architects and planers in their home office. In the project an external user will be able to share high end visual outputs of a Service Center for Visualisation with his own low end CAAD workstation via ISDN-B. The capabilities of these services will range from a still picture archive, real time access to video film archive, a variety of conventional database services to special postproduction for his own 3D data models. The transferred 3D model can be rendered an animated on the Center's systems, if requested also integrated into a video background film. The production will than be available on his workstation screen. These new means will be evaluated in the view of the architects new possibilities for the design process.
keywords	Multimedia, CAAD Services, Computer Animation
series	eCAADe
last changed	2022/06/07 07:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	5fe7
authors	Hoffmann C.M.
year	1989
title	Geometric and Solid Modeling
source	Morgan Kaufmann
summary	Solid modeling is rapidly emerging as a central area of research and de- velopment in such diverse applications as engineering and product design, computer-aided manufacturing, electronic prototyping, o -line robot pro- gramming, and motion planning. All these applications require represent- ing the shapes of solid physical objects, and such representations and basic operations on them can be provided by solid modeling. As a eld, solid modeling spans several disciplines, including mathemat- ics, computer science, and engineering. In consequence, it is a broad subject that must accommodate a diversity of viewpoints and has to meet a diversity of goals. Sometimes, this diversity of goals can lead to con icting demands. Current thinking on the subject views the proper resolution of these con- icts to be application-dependent. That is, it is no longer thought realistic to envision a comprehensive solid-modeling system that satis es the needs of all potential users. Rather, as it is argued, we should concentrate on con- structing a software environment in which many tools for geometric and solid computation are available and can be combined with ease as appropriate for the speci c application under consideration.
series	other
last changed	2003/04/23 15:14

_id	22bd
authors	Hoffmann, C.M., Hopcroft, J.E. and Karasick, M.S.
year	1989
title	Robust Set Operations on Polyhedral Solids
source	IEEE Computer Graphics and Applications. November, 1989. vol. 9: pp. 50-59 : ill. includes bibliography
summary	The paper describes an algorithm for performing regularized Boolean operations on polyhedral solids. Robustness is achieved by adding symbolic reasoning as a supplemental step to resolve possible numerical uncertainty. Additionally, numerical redundancy and numerical computation based on derived quantities are reduced as much as possible. It also discusses the authors' experience with the implementation of the algorithm
keywords	algorithms, polyhedra, solids, representation, computational geometry, geometric modeling, boolean operations
series	CADline
last changed	2003/06/02 14:41

_id	0711
authors	Kunnath, S.K., Reinhorn, A.M. and Abel, J.F.
year	1990
title	A Computational Tool for Evaluation of Seismic Performance of RC Buildings
source	February, 1990. [1] 15 p. : ill. graphs, tables. includes bibliography: p. 10-11
summary	Recent events have demonstrated the damaging power of earthquakes on structural assemblages resulting in immense loss of life and property (Mexico City, 1985; Armenia, 1988; San Francisco, 1989). While the present state-of-the-art in inelastic seismic response analysis of structures is capable of estimating response quantities in terms of deformations, stresses, etc., it has not established a physical qualification of these end-results into measures of damage sustained by the structure wherein system vulnerability is ascertained in terms of serviceability, repairability, and/or collapse. An enhanced computational tool is presented in this paper for evaluation of reinforced concrete structures (such as buildings and bridges) subjected to seismic loading. The program performs a series of tasks to enable a complete evaluation of the structural system: (a) elastic collapse- mode analysis to determine the base shear capacity of the system; (b) step-by-step time history analysis using a macromodel approach in which the inelastic behavior of RC structural components is incorporated; (c) reduction of the response quantities to damage indices so that a physical interpretation of the response is possible. The program is built around two graphical interfaces: one for preprocessing of structural and loading data; and the other for visualization of structural damage following the seismic analysis. This program can serve as an invaluable tool in estimating the seismic performance of existing RC buildings and for designing new structures within acceptable levels of damage
keywords	seismic, structures, applications, evaluation, civil engineering, CAD
series	CADline
last changed	2003/06/02 14:41

_id	6152
authors	Longhi, Domenico
year	1989
title	A System for Building Design Information Management
doi	https://doi.org/10.52842/conf.ecaade.1989.x.b7n
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.11.1-9.11.8
summary	Computer assistants to building process management are not able nowadays to efficiently work out the problems generated by the increased complexity of designing. Actual difficulties depend, on one hand, on the fact D.B.M.S. that have been developed on other environments than CAAD, and on the other hand, on the fact that architectural design process is scarcely formalized. At the Department of T.E.C.A., at the University of Rome, a PhD research program is aimed to overcome difficulties, working out techniques of information management based on Knowledge Engineering and particularly on Knowledge Base Management Systems and Expert Database Systems. At present a prototype system is being developed, that can manage existing technical information, connected with buiIding process.
keywords	Information Management, Data Base, Computer Assistants, BuiIding Process
series	eCAADe
last changed	2022/06/07 07:50

_id	2bcc
authors	Mark, Earl
year	1989
title	A Contrast in Pedagogy: The M.l.T. Versus Harvard Approach to Computer Aided Design
doi	https://doi.org/10.52842/conf.ecaade.1989.x.d8b
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 5.1.1-5.1.9
summary	This is a period of relative detente among academics in the field of computers and architecture, advocating the use of computers in a design studio is today received more politely than, as in the past, when it was received like a declaration of war. Among some research groups at M.I.T. and Harvard to first engage In this field, the approaches were so dissimilar to one another that they could be considered as constituting separate schools of thought. Over time, however, a number of paths have led to a similar direction, if not agreement among principal investigators. The lack of sharply competing ideologies today may be a little less exciting: however, the enormous growth of the academic discipline seems now to allow for a fruitful exchange of ideas between positions that no longer seem mutually exclusive. Two views are important, among others, at M.I.T. and Harvard. The classic M.I.T. view looks upon the AI Lab as a microcosm for examining how architects think. Underlying this view is the position of 'lets examine the way architects think about design and build tools which can reflect that process'. Another point of view, as expressed at Harvard, is speculative on what architects seem to do in design practice and education, rather than speculative on the nature of thinking per se. Both views seem ultimately to be concerned with representing architectural design knowledge within computers. And in the rob of computers as a design medium. This paper examines how the M.I.T. view and the Harvard view have superficially been associated with separate research directions. As these contrasting points of view incorporate many common themes. The author finds that it may be possible to take an eclectic position in teaching computer aided design.
keywords	Constraints, Shape Grammars, Representational World, Emergent Form. Design Thinking, Design Habit
series	eCAADe
email
more	http://palladio.arch.Virginia.EDU/~arch-con/exhibit/
last changed	2022/06/07 07:50

_id	8bf3
authors	McCullough, M., Mitchell, W.J. and Purcell, P. (Eds.)
year	1990
title	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [Conference Proceedings]
source	International Conference on Computer-Aided Architectural Design 1989/ ISBN 0-262-13254-0] (Massachusetts / USA), 1989, 505 p.
summary	Design is the computation of shape information that is needed to guide fabrication or construction of artifacts. But it is not so straightforward as, say, the computation of numerical information required to balance a checkbook. This is partly because algebras of shapes are not as well understood and precisely formalized as algebras of numbers, partly because the rules for carrying out shape computations tend to be fluid and ill defined and partly because the predicates that must be satisfied to achieve successful termination are often complex and difficult to specify. For centuries architects have carried out shape computations by hand, using informal procedures and the simplest of tools. Over the last two decades though, they have made increasing use of more formal procedures executed by computers. It is still too early to be sure of the gains and losses that follow from this development, but there is no doubt that it raises some challenging questions of architectural theory and some perplexing issues for those concerned with the future of architectural education. This book frames those issues and provides a diversity of perspectives on them. Its contents were initially presented at the CAAD Futures 89 Conference-an international gathering of researchers and teachers in the field of computer-aided architectural design which was jointly sponsored by the Harvard Graduate School of Design and the MIT Department of Architecture and held in Cambridge, Massachusetts, in July 1989. There are four major sections: Theoretical Foundations, Knowledge-Based Design Tools, Information Delivery Systems, and Case Studies: Electronic Media in the Design Studio. In a representative collection of current views, over thirty extensively illustrated papers discuss the experiences of universities in the USA, Europe, Japan, Israel, Canada, and Australia, articulate present theoretical and practical concerns, provide criticism of media and methods, and suggest directions for the future. Architectural educators and architects concerned with the effect of computer technology on the design process will find here an indispensable reference and a rich source of ideas. This book was itself prepared in an electronic design studio. Composition and typography, most image collection and placement, and such editing as was practical within this publishing format, were all performed digitally using Macintosh computers at the Harvard Graduate School of Design during a period of a few weeks in 1989.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e91f
authors	Mitchell, W.J., Liggett, R.S. and Tan, M.
year	1990
title	Top-Down Knowledge-Based Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 137-148
summary	Traditional computer drafting systems and three- dimensional geometric modeling systems work in bottom-up fashion. They provide a range of graphic primitives, such as vectors, arcs, and splines, together with operators for inserting, deleting, combining, and transforming instances of these. Thus they are conceptually very similar to word processors, with the difference that they operate on two- dimensional or three-dimensional patterns of graphic primitives rather than one-dimensional strings of characters. This sort of system is effective for input and editing of drawings or models that represent existing designs, but provides little more help than a pencil when you want to construct from scratch a drawing of some complex object such as a human figure, an automobile, or a classical column: you must depend on your own knowledge of what the pieces are and how to shape them and put them together. If you already know how to draw something then a computer drafting system will help you to do so efficiently, but if you do not know how to begin, or how to develop and refine the drawing, then the efficiency that you gain is of little practical consequence. And accelerated performance, flashier color graphics, or futuristic three-dimensional modes of interaction will not help with this problem at all. By contrast, experienced expert graphic artists and designers usually work in top-down fashion-beginning with a very schematic sketch of the whole object, then refining this, in step-by-step fashion, till the requisite level of precision and completeness is reached. For example, a figure drawing might begin as a "stick figure" schema showing lengths and angles of limbs, then be developed to show the general blocking of masses, and finally be resolved down to the finest details of contour and surface. Similarly, an architectural drawing might begin as a parti showing just a skeleton of construction lines, then be developed into a single-line floor plan, then a plan showing accurate wall thicknesses and openings, and finally a fully developed and detailed drawing.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8283
authors	Mollaert, M.
year	1989
title	A Kernel Reference Model for Computer Aided Architectural Deslgn.
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x3b
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.1.1-9.1.7
summary	For the architectural practice drawings are the most important medium to transfer information. Other documents concerning planning, quantities, calculations or descriptions are complements to the drawn construction data. The automatisation made it possible to spent less time to obtain drawings of higher quality, and to handle the administrative data in a more efficient manner.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	effd
authors	Morozumi, M., Nakamura, H. and Kijima, Y.
year	1990
title	A Primitive-Instancing Interactive 3-D Modeling System for Spatial Design Studies
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 457-468
summary	The authors have developed a basic, interactive, primitive-instancing 3-D modeling system (CAADF), which is based on a high-speed 3-D color graphic workstation, and have tested its potential ability to support spatial design studies in an architectural design studio. After- a review of work performed by a student with the system, this paper concludes that this system provides an attractive environment for spatial design studies which conventional CAD systems have not achieved. The interactive process of 3-D modeling in perspective or isometric view images and the dynamic viewing utility are the most successful features of the system. In contrast to those advantages, the resolution of color graphic display is a limitation of the system. The authors conclude that if sufficiently many appropriate 3-D geometric primitives are supported by a CAD system, a primitive instancing method can significantly reduce the work entailed in object modeling.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	21b5
authors	Müller, Volker
year	1993
title	Introducing CAD to a Big Corporation
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 497-512
summary	The report presents the ongoing activity of introducing CAD to the entire range of facilities planning and management of the Frankfurt Airport Corporation. It addresses issues of organizing the shift from conventional to computer supported planning and facilities management,- the problems of training professionals with various background in the use of new tools; aspects of data validity; regulation of data exchange; and customization of software to the needs of special tasks within the corporation. The report is based on about four years of project runtime. The preparation of the project started in fall 1988. The project proper started in June 1989. It is entering its last year. Up to now about 120 persons have been trained to use CAD.
keywords	CAD Introduction, Corporation Setting, Adult Education, Data Integrity, Data Security, Data Exchange, Linkage Between Geometric and Alphanumeric Data, Customized Systems
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e6b2
authors	Rosenman, M.A., Gero, J.S. and Postmus, A.G. (et al)
year	1989
title	Development and Implementation of SOLAREXPERT--An Expert System to Aid the Passive Solar Design of Housing
source	Expert Systems in Engineering Applications International Conference Proceedings. 1989. China: Huazhong University of Science and Technology Press, pp. 16-22. CADLINE has abstract only
summary	This paper describes the design development and implementation of an expert system to aide the passive solar design of housing. The functional specifications and functional requirements are presented. The resulting system, SOLAREXPERT, is described, and conclusions drawn from the experience are presented
keywords	energy, design, expert systems, architecture
series	CADline
email
last changed	2003/06/02 14:41

For more results click below: