Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 4559

Reformat results as: short short into frame detailed detailed into frame

_id	c903
authors	Mark, Earl
year	1990
title	Case Studies in Moviemaking and Computer-Aided Design
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 393-412
summary	A movie which is developed from site location video, sync sound, and computer graphics animation can provide a highly convincing simulation of reality. A movie that conveys a sense of the space, materials and juxtaposition of objects of a proposed architectural design provides a special kind of realism, where the representation may be of a proposed building that exists only within the mind of an architect. For an experienced architect, however, the movie may not provide a good surrogate experience for what it feels like to actually be within the architectural space. In these case studies, a few projects that combine moviemaking and computer-aided design technologies are examined. These projects were completed using a combination of resources at the MIT School of Architecture and Planning and the Harvard Graduate School of Design. The integrated use of these media is presented as conceptualized with the Electronic Design Studio, a research project that has been supported over the past five years by Project Athena at MIT. The impact of movies and computer-aided design on the perception of architectural space is also reported- based on a pilot study of twenty architectural students.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	2db4
authors	Schmitt, Gerhard
year	1992
title	Design for Performance
source	New York: John Wiley & Sons, 1992. pp. 83-100 : ill. includes bibliography Design for performance describes a generative approach toward fulfilling qualitative and quantitative design requirements based on specification and existing cases. The term design applies to the architectural domain: the term performance includes the aesthetic, quantitative, and qualitative behavior of an artifact. In achieving architectural quality while adhering to measurable criteria, design for performance has representational, computational, and practical advantages over traditional methods, in particular over post-facto single- and multicriteria analysis and evaluation. In this paper a proposal for a working model and a partial implementation of this model are described. architecture / evaluation / performance / synthesis / design / representation / prediction / integration. Ô h)000*°° ÔŒ21. Schneekloth, Lynda H., Rajendra K. Jain and Gary E. Day. 'Wind Study of Pedestrian Environments.' February, 1989. 30, [2] p. : ill. includes bibliography and index.
summary	This report summarizes Part 1 of the research on wind conditions affecting pedestrian environments for the State University of New York at Buffalo. Part 1 reports on existing conditions in the main part of the North Campus in Amherst. Procedures and methods are outlined, the profile of the current situation reported, and a special study on the proposed Natural Science and Math Building are included
keywords	architecture, research, evaluation, analysis, simulation, hardware
series	CADline
last changed	1999/02/12 15:09

_id	ecaade2015_229
id	ecaade2015_229
authors	Pak, Burak and Meeus, Bruno
year	2015
title	Project Arrivée: Counter-mapping Super-diversity in Brussels and Ghent with Architecture Students
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 369-378
doi	https://doi.org/10.52842/conf.ecaade.2015.1.369
wos	WOS:000372317300040
summary	This paper introduces a counter-mapping attempt augmented by a Geoweb 2.0 platform in the context of two Belgian inner-city neighborhoods. The two aims of this project were to build a platform for the collective construction of a better understanding this dynamic super-diverse arrival environment and bring the various qualities and aspects of these super-diverse urban neighborhoods to foreground. In this study we report on the first results of this project which took place in Ghent and Brussels in 2014. Around 300 architecture students registered, interpreted and geocoded visible signs along preconceived tracks by means of a Geoweb 2.0 platform. Through field observations and interviews, the students created dynamic and interactive maps. We found that the large-scale mapping through Geoweb 2.0 makes it possible to discern different layers of use in arrival neighborhoods. These layers referred to different population groups which continuously have to negotiate each other's presence. Furthermore, the platform created the possibility to effectively and efficiently combine student fieldwork with online and offline lectures and offered students the opportunity to comment on, peer-review and learn from each other's insights. The findings will serve as an alternative information resource in the forthcoming Master's thesis graduation design studio which will be led by the first author.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	a2de
id	a2de
authors	Gao, Song; Kvan, Thomas
year	2003
title	AN ANALYSIS OF PROBLEM FRAMING ACTIVITIES IN DIGITAL VERSUS PAPER MEDIA
source	Architectural Education, Southeast University, Nanjing, China, December 2003, pp. 183-189
summary	Architectural design is described in part as the solving of ill-defined or wicked problems. In these activities, designers are not only simply given well-stated problems but also need to find and formulate problems. This process is called as ‘problem framing’. Paper media have been for many years the design tools used by designers to help them engage, and hence frame, problems. Computer technologies have gained prominence in design processes but have typically been used in discrete problem solving processes or in presentation. It has been stated that problem exploration is more difficult using a computer tool. This attitude has influenced the teaching and use of computers in architectural education. The purpose of this study is to understand how digital and paper media are used respectively in ‘problem framing’ activities in support of students’ design learning. This paper reports a pilot laboratory study to test the validity of a proposed coding scheme comparing design activities using digital and paper media and report initial results of the research. Through this research we wish to gain insight of ways in which students engage in ‘problem framing’ activities using different media and suggest ways in which digital media might better support problem framing activities.
keywords	Problem framing; digital design; protocol analysis; studio teaching
series	other
type	normal paper
email
last changed	2004/09/24 14:34

_id	84e1
authors	Kovacs, Laszio Bela and Galle, Per
year	1990
title	Logic Programming for Concept Modelling and Support of Urban Housing Design : A Pilot Study
source	1990. 134 p. CADLINE has abstract only
summary	Starting from a case study of manual sketch design of a residential area, the authors develop a prototypical site plan for low to medium density housing. The layout keeps pedestrian and vehicular traffic separated and provides open green area as well as a concentrated urban atmosphere. The constituents of the prototype layout are identified and a system of concepts devised accordingly. This conceptual analysis is formalized, using a Horn clause logic notation. Aspects of the resulting logic model concerning design of walking lines and plazas are refined into a considerable amount of detail. This exercise in knowledge representation seems to indicate that it will be possible, within the logic programming paradigm, to implement computerized support systems able to cooperate with and simulate designers working with architectural design. The main result of the study is that logical analysis of a particular prototype design can result in a collection of quite general concepts which are potentially useful in many other context than that of the prototype, for other kinds of design tasks. The report concludes by recommending several lines or aspects of future research in this area
keywords	architecture, design, logic, programming, knowledge base, systems, CAD, layout, prototypes
series	CADline
last changed	2003/06/02 10:24

_id	ecaade2016_123
id	ecaade2016_123
authors	Puusepp, Renee, Cerrone, Damiano and Melioranski, Martin
year	2016
title	Synthetic Modelling of Pedestrian Movement - Tallinn case study report
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 473-481
doi	https://doi.org/10.52842/conf.ecaade.2016.2.473
wos	WOS:000402064400047
summary	This paper builds towards the argument that pedestrian traffic in the city can be successfully simulated with agent-based computational models if pedestrians' movement patterns are appropriately studied first. Furthermore, such simulation models, when finely calibrated and supported by onsite observations, allow planners to evaluate different urban design scenarios.We present a pilot study carried out in the centre of Tallinn, and discuss a way of how pedestrian movement simulations can be conceived. In the pilot study we recorded some 120 traces of pedestrians' movement and developed a prototype of an agent-based computational model to simulate this movement. Additionally we investigated the possibility of including solar analysis into the computational model. Already this short exercise offered us some interesting insights into how certain spatial qualities and features can drive pedestrian traffic making urban walkers to verge off the shortest routes. The pilot study was carried out in the context of the High Street project [1] for turning the centre of Tallinn into more pedestrian friendly area by redesigning urban space, calming vehicular traffic and creating new opportunities for businesses to flourish.
keywords	agent-based model; urban analysis; pedestrian simulation; movement patterns; solar analysis
series	eCAADe
email
last changed	2022/06/07 08:00

_id	a46a
authors	Tsou, J.-Y., Lam, S. and Hall, T.W.
year	2001
title	Integrating Scientific Visualization with Studio Education – Developing Design Options by Applying CFD
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 302-310
doi	https://doi.org/10.52842/conf.acadia.2001.302
summary	To meet the urgent need of education in environmentally responsive architecture, the Architecture Department of The Chinese University of Hong Kong has organized lectures and studios to provide students with knowledge and hands-on experience in environmental design strategies. Considering the context of Hong Kong with a hot-humid sub-tropical climate and hyper-dense urban environment, the current approach in the design studio education has been mainly based on intuition with very limited supports in terms of technical know-how and scientific evidence. Many students of architecture tend to follow established paradigms that have evolved through experience with similar projects. In this paper, we report the research findings of a pilot study that applied advanced scientific simulation skills in studio education designed to help students explore environmental design strategies during early stages of project design development.
keywords	Scientific Visualization, Studio Education, Computer-Aided Architectural Design
series	ACADIA
email
last changed	2022/06/07 07:57

_id	2d44
authors	Tsou, Jin-Yeu and Chow, Benny
year	2002
title	Integrating Scientific Simulation with Rapid-Prototyping Modeling for Design Curriculum Development
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 548-551
doi	https://doi.org/10.52842/conf.ecaade.2002.548
summary	Although Computer-Aided Architectural Design tools have been introduced to studios for design visualization and communication, tangible models constructed by cardboard or other modeling materials still play an important role in assisting students on developing their conceptual framework related to spatial organization. A Rapid Prototyping (RP) system could provide a paradigm shift from the existing workflow of hand-made architectural model into an automated computer-aided manufacturing (CAM) environment. The introduction of computer controlled manufacturing technology will not limit the use of current conventional model making, and it will provide new capabilities for precise scaled model making and the possibility to generate free-form surface models for design representation. Because the technical capabilities of RP system could dramatically change the design workflow, the computer-aided manufacturing approach for architectural design has been adopted by overseas and local academic institutions. In this paper, we report the findings of a pilot study that applied rapid prototyping technology in architectural design education for helping students exploring an automated computer-aided manufacturing environment during early stage of design development.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	e80e
authors	Van der Does, Jan
year	1993
title	Visualising by Means of Endoscope, Computer and Hand-Drawn Techniques
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 167-180
summary	Traditionally, communication during the various stages of the building process takes place via drawings of floor plans, elevations, perspectives and scale models. Computerized drawing techniques have recently come into use. Ways of presenting designs have increasingly become of far-reaching importance in current architecture. Nowadays architectural firms employ specialists who are familiar with the latest developments in the field of presentation techniques, or they farm this highly significant part of their job out to gifted designers. Some of the new techniques being developed endeavor to provide a more realistic presentation of designs of housing estates. Apart from new drawing techniques, mention should also be made of the endoscope, an instrument which can simulate an eye-level tour around a scale model while recording it on videotape. Realistic representations differ quite a lot from the conventional architectural presentation techniques applied, which require a larger amount of imagination on the part of the onlookers. The afore mentioned architectural notation systems, on the one hand, can only be understood by experts, in spite of added explanatory signs and symbols. The often used models and artist’s impressions, on the other hand, frequently create a somewhat distorted view, due to lack of concern for spatial proportions. As a consequence, the design presented and the actual architectural realisation may turn out to differ widely. To bridge the widening gap between the experts and the users, clients and government officials, research concerning architectural representation is needed. In 1990 a Dutch scientific journal, issued by The Delft University, published an illustrated report of research findings under the title Overdracht en Simulatie (Information and Simulation). The article gives a description of a pilot study carried out by a research team (Van Der Does, Van Haaften, Kegel and Vrins) to assess and evaluate various presentation techniques used in architecture. This study was just a first step towards a more detailed follow-up study, to which I shall come back after having given a summarized view of the pilot study.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	caadria2022_497
id	caadria2022_497
authors	Varinlioglu, Guzden, Vaez Afshar, Sepehr, Eshaghi, Sarvin, Balaban, Ozgun and Nagakura, Takehiko
year	2022
title	GIS-Based Educational Game Through Low-Cost Virtual Tour Experience- Khan Game
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 69-78
doi	https://doi.org/10.52842/conf.caadria.2022.1.069
summary	The pandemic brought new norms and techniques of pedagogical strategies in formal education. The synchronous/ asynchronous video streaming brought an emphasis on virtual and augmented realities, which are rapidly replacing textbooks as the main medium for learning and teaching. This transformation requires more extensive online and interactive content with simpler user interfaces. The aim of this study is to report on the design, implementation, and testing of a game based on low-cost and user-friendly content for digital cultural heritage. In this project, a game aimed at inclusive and equitable education was developed using 360 images of the targeted architectural heritage geographically distributed in a pilot site. We promote lifelong learning opportunities for all, following the SDG4, aiming for quality education with the easy-to-use online platform and easy access to immersive education through mobile platforms. Towards a post-carbon future without the need for travel, computational design methods such as using 360 videos and images in combination with virtual reality (VR) headsets allow a low-cost approach to remotely experiencing cultural heritage. We propose developing and testing a GIS-based educational game using a low-cost 360 virtual tour of architectural heritage, more specifically, caravanserais of Anatolia.0864108000
keywords	digital heritage, 360 images, educational games, caravanserais, SDG 4
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	c8b8
authors	Woodbury, R., Braithwaite-Woodbury, G., Spassov, K., Radford, A. and Sweeting, R.
year	1996
title	A Pilot Study of 3D Computer Modelling of Development Applications and Assessment of Software Applications for Use in Computer Modelling
source	Report to The Corporation of the City of Adelaide, by Luminis Pty Ltd on behalf of Adelaide University, June
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:41

_id	sigradi2012_30
id	sigradi2012_30
authors	Angeluzzi, Gustavo; Hanns, Daniela Kutschat
year	2012
title	Um levantamento de requisitos gerais para o desenvolvimento e posicionamento de DOOTERS – um aplicativo lúdico de listas de tarefas para iPhone [A survey of general requirements for developing and positioning DOOTERS - a to-do list application for iPhone]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 191-195
summary	DOOTERS is a to-do list application for iPhone which entertains and motivates the user to get things done. It was developed based on requirements obtained trough: 1. the study of several personal information organizing methods (Covey, 1989; Allen, 2005; Foster, 2006); 2. answers to a task lists user focused questionnaire; 3. observation of to-do list users while creating lists and organizing tasks; 4. comparison of digital and non-digital task list media (paper, computer and mobile device); 5. analysis of profiles, behaviors and to-do list applications for iPhone. In this paper, the authors present the process of obtaining requirements for developing and positioning DOOTERS.
keywords	information and interface design, requirements, to-do list application, iPhone, DOOTERS
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	1e3d
authors	Bernard, Rusty
year	1989
title	USL/State Facility Planning and Control Automation Pilot Project
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 179-192
doi	https://doi.org/10.52842/conf.acadia.1989.179
summary	State supported Universities often lend a helping hand to their state by providing services which may be difficult or impossible to acquire otherwise. This presentation reviews the process of computer aided facility management with special reference to a recently completed joint venture project to fully automate Louisiana's Facility Planning and Control services.
series	ACADIA
last changed	2022/06/07 07:52

_id	235d
authors	Catalano, Fernando
year	1990
title	The Computerized Design Firm
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 317-332
summary	This paper is not just about the future of computerized design practice. It is about what to do today in contemplation of tomorrow-the issues of computercentered practice and the courses of action open to us can be discerned by the careful observer. The realities of computerized design practice are different from the issues on which design education still fixes its attention. To educators, the present paper recommends further clinical research on computerized design firms and suggests that case studies on the matter be developed and utilized as teaching material. Research conducted by the author of this paper indicates that a new form of design firm is emerging-the computerized design firm-totally supported and augmented by the new information technology. The present paper proceeds by introducing an abridged case study of an actual totally electronic, computerized design practice. Then, the paper concentrates on modelling the computerized design firm as an intelligent system, indicating non-trivial changes in its structure and strategy brought about by the introduction of the new information technology into its operations - among other considerations, different strategies and diverse conceptions of management and workgroup roles are highlighted. In particular, this paper points out that these structural and strategic changes reflect back on the technology of information with pressures to redirect present emphasis on the individual designer, working alone in an isolated workstation, to a more realistic conception of the designer as a member of an electronic workgroup. Finally, the paper underlines that this non-trivial conception demands that new hardware and software be developed to meet the needs of the electronic workgroup - which raises issues of human-machine interface. Further, it raises the key issues of how to represent and expose knowledge to users in intelligent information - sharing systems, designed to include not only good user interfaces for supporting problem-solving activities of individuals, but also good organizational interfaces for supporting the problem-solving activities of groups. The paper closes by charting promising directions for further research and with a few remarks about the computerized design firm's (near) future.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	c3ec
authors	Coyne, Richard D. and Radford, Antony D.
year	1989
title	Knowledge-based Design Systems in Architecture : a Linguistic Perspective
source	Knowledge Based Systems in Architecture. Helsinki: Acta Polytechnica Scandinavica, 1989. pp. 27-36
summary	The separation of syntax and semantics in systems for the production of architectural designs is discussed. In producing designs we are less interested in mapping between buildings and their meaning than in mapping between an intended meaning and a design description of a kind that can be constructed, a mapping between semantic and syntactic realms. The thesis of this paper is that it is both feasible and operationally useful to separate the consideration of interpretation and syntactic generating in design. The authors first examine the possibility of operating in the syntactic realm, then the possibility of operating in the interpretative realm. Finally they examine how a design system might combine interpretative and syntactic systems
keywords	reasoning, design, CAD, architecture, knowledge base, semantics
series	CADline
email
last changed	2003/05/17 10:13

_id	a718
authors	Cuomo, Donna L. and Sharit, Joseph
year	1989
title	A Study of Human Performance in Computer-Aided Architectural Design
source	International Journal of Human-Computer Interaction. 1989. vol. 1: pp. 69-107 : ill. includes bibliography
summary	This paper describes the development and application of a cognitively-based performance methodology for assessing human performance on computer-aided architectural design (CAAD) tasks. Two CAAD tasks were employed that were hypothesized to be different in terms of the underlying cognitive processes required for these tasks to be performed. Methods of manipulating task complexity within each of these tasks were then developed. Six architectural graduate students were trained on a commercially available CAAD system. Each student performed the two experimental design tasks at one of three levels of complexity. The data collected included protocols, video recordings of the computer screen, and an interactive script (time-stamped record of every command input and the computers textual response). Performance measures and methods of analysis were developed which reflected the cognitive processes used by the human during design (including problem- solving techniques, planning times, heuristics employed, etc.) and the role of the computer as a design aid. The analysis techniques used included graphical techniques, Markov process analysis, protocol analysis, and error classification and analysis. The results of the study indicated that some measures more directly reflected human design activity while others more directly reflected the efficiency of interaction between the computer and the human. The discussion of the results focuses primarily on the usefulness of the various measures comprising the performance methodology, the usefulness of the tasks employed including methods for manipulating task complexity, and the effectiveness of this system as well as CAAD systems in general for aiding human design processes
keywords	protocol analysis, problem solving, planning, CAD, design process, performance, architecture
series	CADline
last changed	2003/06/02 13:58

_id	e33a
authors	De Cola, S., De Cola, B. and Pentasuglia, Francesco
year	1990
title	Messina 1908: The Invisible City
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 239-246
summary	The initial purposes of this work were to build a 3D model of the old city of Messina and to reconstruct a walk through it; to understand the "Ghost city," the parts that form it, and the rules of its plan, which are explicit in some cases but hidden most of the time; to measure its space, appreciate the similarities to and differences from modern city plans, and use the information to improve the plans of tomorrow. It might seem a useless study of a nonexistent city, and yet during the months of detailed work, of patient reconstruction from the surveys and photographs of the city destroyed in 1908, we began to consider how it was still possible to obtain spatial values of and to project behaviors in the lost city, in other words, to practice tests on memory that are very interesting for people working in a context in which memory no longer exists. The work presented here is the first stage of a more complex research project still to be carried out on Messina as it was at the end of the nineteenth century. Here we constructed a 3D model of some parts of the city prior to the earthquake of 1908 and made a five-minute video, using cartoon techniques, of an "impossible" walk through the city. The fragments of the city were reconstructed from available documentary sources, primarily photographic images, which tended to be of the most important places in the city.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	a8b7
authors	De Grassi, Mario and Di Manzo, Mauro
year	1989
title	The Design of Buildings as Changes of Known Solutions: A Model for “Reasoner B” ; Reasoner B" in the Castorp System
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 7.3.1-7.3.9
doi	https://doi.org/10.52842/conf.ecaade.1989.x.u3h
summary	The paper presents a study aimed at the modelization of a design operation of perturbation of an architectural framework in order to comply with a series of given design specifications. A formalized representation of the building object is assumed, Artificial Intelligence techniques are adopted to work on it. It is assumed that the computer carries out deformations starting from one of these structures in order to attain to a solution consistent with project specifications. A description of the structures employed for the representation of the building body (matroids) is firstly proposed. A planning theme is then assumed, as an example, whose main feature is to maintain the outer perimeter of a dwelling, to change its internal distribution in such a way as to resemble as closely as possible to the original and yet meaningfully alter its typology.
series	eCAADe
type	normal paper
last changed	2022/06/07 07:50

For more results click below: