Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 6693

Reformat results as: short short into frame detailed detailed into frame

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	c0a3
authors	Harfmann, Anton C. and Chen, Stuart S.
year	1989
title	Component Based Computer Aided Learning for Students of Architecture and Civil Engineering
doi	https://doi.org/10.52842/conf.acadia.1989.193
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 193-208
summary	The paper describes the methodology and the current efforts to develop an interdisciplinary computer aided learning system for architects and civil engineers. The system being developed incorporates a component oriented relational database with an existing interactive 3-dimensional modeling system developed in the School of Architecture and Planning at SUNY Buffalo. The software will be used in existing courses in architecture and civil engineering as a teaching aid to help students understand the complex 3-dimensional interrelationships of structural components. Initial implementation has focused on the modeling of the components and assemblies for a lowrise steel frame structure. Current implementation efforts are focusing on the capability to view connections in various ways including the ability to "explode" a connection to better understand the sequence of construction and load paths. Appropriate codes, limit states of failure and specific data will be linked to each specific component in an expert system shell so that the system can offer feedback about a student generated connection and perhaps offer other possible connections a library of standard connections. Future expansion of the system will include adding other "systems" of a building, such as mechanical, electrical, plumbing, enclosure etc., to help students visualize the integration of the various parts.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	39e0
id	39e0
authors	Jablonski, Allen D.
year	1991
title	Integrated Component-based Computer Design Modeling System: The Implications of Control Parameters on the Design Process
source	New Jersey Institute of Technology, Newark, NJ Graduate Thesis - Master's Program College of Architecture
summary	The design process is dependent on a clear order of integrating and managing all of the control parameters that impact on a building's design. All component elements of a building must be defined by their: Physical and functional relations; Quantitative and calculable properties; Component and/or system functions. This requires a means of representation to depict a model of a building that can be viewed and interpreted by a variety of interested parties. These parties need different types of representation to address their individual control parameters, as each component instance has specific implications on all of the control parameters. Representations are prepared for periodic design review either manually through hand-drawn graphics and handcrafted models; or with the aid of computer aided design programs. Computer programs can profoundly increase the speed and accuracy of the process', as well as provide a level of integration, graphic representation and simulation, untenable through a manual process. By maintaining a single control model in an Integrated Component-based Computer Design Modeling System (ICCDMS), interested parties could access the design model at any point during the process. Each party could either: 1. Analyze individual components, or constraints of the model, for interferences against parameters within that party's control; or 2. Explore design alternatives to modify the model, and verify the integration of the components or functions, within the design model, as allowable in relation to other control parameters.
keywords	Architectural Design; Data Processing
series	thesis:MSc
type	extended abstract
email
more	http://www.library.njit.edu/etd/1990s/1990/njit-etd1990-005/njit-etd1990-005.html
last changed	2006/09/25 09:04

_id	c3f1
authors	Jackson, Daniel M.
year	1990
title	Electronic Telecommunications and the Emergence ofGlobal Architecture
source	School of Architecture and Planning, State University of New York at Buffalo
summary	The act of communicating is an organizational behavior which can be learned and modified to create the most efficient environment for the exchange of information. A state of effective communication relies not only upon its methods but also upon its underlying state of organization. In utilizing the computer to decrease the obstruction of time and distance, the profession can accelerate and become more efficient in communicating on the three most basic levels of information and thought transfer: (1) between the architect and the client; (2) between the architect and the design team (whether they are within the same office or are distant consultants); and (3) between the constantly growing and universally accessible sources of both specific and general knowledge and data bases. The use of the computer as a tool for instantaneous access to knowledge pools, clients and other professionals poses several questions which should be of great concern within the architectural community which has become compartmentalized. This paper explores how the computer can aid the architect in communication amongst peers, with the client, and eventually, with the builder and user. Furthermore, this paper proposes a 'global network' or 'global office' as an extension of current practice wherein the architect's entire scope of design knowledge is broadened. [Citation from CADLine]
keywords	Architecture; Communication; Information; Practice
series	thesis:MSc
last changed	2002/12/14 19:17

_id	caadria2006_047
id	caadria2006_047
authors	SHAI YESHAYAHU, A.; B. MARIA VERA
year	2006
title	CUT, COPY, PASTE SOCIETY
doi	https://doi.org/10.52842/conf.caadria.2006.x.g1r
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 47-52
summary	You and I were not born in the 1990’s thus our experience about the true modalities of circulation and communication that have substantially transformed the methods that form and inform us today, are not really “pure”. Why? Because we know how slow time was before the communication boom of this last decade and because some of us still believe that we must read to be inform and thus, visit a bookstore, library or friends house and get peeks inside a subject of matter. So experiencing life as we bypass the book _ that’s a story of a brand new era! Taking note of the enormous changes this era brings, is fundamental to our current pedagogic undertakings. We seek data about the differences that lie in the way individuals, which never knew a world before or between analogue and digital zones, process information. It signals a dramatic shift in cognitive realms that is deeply imbedded in our emerging socio-economic spheres. So, you say “hypothesizing that economic, technologic, and cultural fluxes fabricate new means to learn and think, is not a fresh idea”_ True. But, it led us to ask one fundamental question _What are the upcoming learning habits employed by the “post digital” society? We noted that the post digital generation is an avid cut, copy, paste society that is able to extract information from infinite resources and mix, remix in diversified modes, through time and in real-time. We think these abilities are strengths, which will permit students to multitask yet they strongly differ from the academic agendas that are concerned with meditative processes and qualitative interdisciplinary task. As aspiring academics interested in the reconfiguration of current pedagogic formats we seek a creative intervention for future design generations, one that can benefit both the upheavals of the cultural world and the integrity of the academic setting where a pedagogy that links extended fields of knowledge with shifting cognitive habits can emerge. In this arena where cognition plays an important role, our goals are challenging and difficult, especially in the beginning years when the foundations set forward leaves lasting impressions. Thus, letting go of familiar grounds and tuning to continual alterations of the immediate surroundings enables us to seek means that facilitate important readings for our current learning/teaching processes. Demystifying changes and embracing differences as design potentials for new interventions are basic programmatic elements that permit us to incorporate a rigorous research agenda in the design exercises. Our presentation will project the current state of our teaching modality and provide examples of current studio work. It will demonstrate how everyday rituals, journeys and research observations, are documented by a society that heralds a new academic setting.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	2bb6
authors	Van Bakergem, Dave
year	1990
title	Image Collections in the Design Studio
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 261-271
summary	No matter what the medium, architects are constantly using images in all aspects of design thinking. Whether it is the perception of the environment, an image in the mind's eye, an abstract drawing or a photographic record, designers use images to conceive of, and manipulate their design ideas. Managing these image collections occurs at a variety of levels in the creative process and is dependent on the type of image that is called upon for reference. The most basic example would be the image collection residing in the mind's memory which is a result of the designer’s world experiences and the relative impressiveness of each experience. Clearly, personal memory plays a significant role in the use of imagery in design, but it is unreliable and can be abstracted in uncontrollable ways. The sketchbook and later photographic collections of the grand tour were the beginnings of efforts to manage and utilize image collections as an aid to drawing and thinking about design. Now the capacity to use electronic means of creating, altering, storing, and retrieving images will enable designers to effectively use large image collections in ways that have not been possible before. This paper describes current work at the School of Architecture at Washington University in a graduate design studio. The students use a powerful 3D modeling CAD system (HOKDraw) to design and present their studio projects. In addition, we are experimenting with an image storage and retrieval system which is directly linked to the CAD model through a relational database (INGRES). Access to the database and images is instantly available through the command language and graphic display. The CAD model in effect becomes a 3D menu to an extensive image database stored on an optical memory disc recorder. Several collections are available to the studio members: the library's slide collection which relates to the studio project, specific photographs and drawings of the project site, and personal image collections stored by individuals for their own reference. The commonly accessible images are basically background material and images collected by the students to document the site, urban context and building typology. The personal images collections are any images (drawings, photographs, published images, CAD images) created or collected by the students for purposes of informing their design thinking. This work relates to the use of precedents and typology in architecture as a point of departure as well as in development of design ideas.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	sigradi2015_sp_9.38
id	sigradi2015_sp_9.38
authors	Braga, Profa. Dra. Gisele Pinna; Wilezelek, Alex Franz; Golding, Jahsun Daher; Uszkurat, Oliver
year	2015
title	Trees in Curitiba streets: methodology and production of a digital library
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 807-809.
summary	Digital representation is an important resource for the architect’s work in all project stages. The use of appropriate representations facilitates proper interpretation of the project, resulting in more accurate design decisions. This article presents the entire process and the results of a n academic research that developed a digital library that contains 25 species of trees, easily found in Curitiba streets. It also describes the methodology that was built throughout the study, which focuses on a production of representations that do not depend on special talent or personal drawing characteristics. Finally, it shows the produced representations and provides a brief analysis of the results.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	6e36
authors	Castañé, Dora
year	1999
title	Documentation and Patrimony. The Digital Era: A Channel for Memory Recovery
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 451-457
summary	The end of the millennium with its new digital technology is contributing important tools to the area of documentation and historical patrimony those of us who support the preservation of memories think that a very important way of personalizing and strengthening our identity is to provide to those who inhabit the city with heightened awareness towards the values of our past. The revitalization requires that the patrimony in itself be valued. At the same time, it necessitates the preparation of a great amount of information utilizing cataloguing, research databases, and other materials be accessible to all citizens. This piece of work shares the different digital data base experiences that are being developed in the CEDODAL foundation art and latinamerican architecture (center for documentation), which is under the direction of the architect Ramon Gutierrez, a research services organization, and diverse higher education institutions (universities). Four bases are introduced, each with different thought and criterion structures in the definition of fields as well as in their dynamic visualizations. Each of them possesses great quantities of digital images, blue prints, and texts. In three of those bases, the data is the output from teams of researchers in different topics through special arrangements with Santa Fe's provincial water), Fonart, and city government. At the same time, the CEDODAL catalogues its documentaries with great quantities of photographic information, blue prints, research passages, and a library.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ecaade2016_074
id	ecaade2016_074
authors	Das, Subhajit, Day, Colin, Dewberry, Michael, Toulkeridou, Varvara and Hauck, Anthony
year	2016
title	Automated Service Core Generator in Autodesk Dynamo - Embedded Design Intelligence aiding rapid generation of design options
doi	https://doi.org/10.52842/conf.ecaade.2016.2.217
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 217-226
summary	Building design entails an intuitive and informative exploration of an architect involving iterative refinement of design ideas till client objectives, and priorities are satisfied. Similarly, service cores in a building are designed through the exploration of multifarious design options each with different performative metrics regarding accessibility, efficiency, cost, feasibility, etc. As the current process is labor-intensive, manual & dependent on the expertise of the architect, the search space leading to the selection of an optimal design alternative is very limited. This paper describes Service Core Generator (SCG) library in Autodesk Dynamo enabling automated generation of service core models for varied building shell geometry types (limited to orthogonal profiles). The tool described encodes explicit and implicit domain knowledge into the system facilitating service core models for buildings across varied scale with use type's including offices, hotels or residential buildings.
wos	WOS:000402064400021
keywords	Design Alternatives; Geometry Analysis; Parametric Modelling; Design Tools; Design Automation;
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia06_068
id	acadia06_068
authors	Elys, John
year	2006
title	Digital Ornament
doi	https://doi.org/10.52842/conf.acadia.2006.068
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 68-78
summary	Gaming software has a history of fostering development of economical and creative methods to deal with hardware limitations. Traditionally the visual representation of gaming software has been a poor offspring of high-end visualization. In a twist of irony, this paper proposes that game production software leads the way into a new era of physical digital ornament. The toolbox of the rendering engine evolved rapidly between 1974-1985 and it is still today, 20 years later the main component of all visualization programs. The development of the bump map is of particular interest; its evolution into a physical displacement map provides untold opportunities of the appropriation of the 2D image to a physical 3D object.To expose the creative potential of the displacement map, a wide scope of existing displacement usage has been identified: Top2maya is a scientific appropriation, Caruso St John Architects an architectural precedent and Tord Boonje’s use of 2D digital pattern provides us with an artistic production precedent. Current gaming technologies give us an indication of how the resolution of displacement is set to enter an unprecedented level of geometric detail. As modernity was inspired by the machine age, we should be led by current technological advancement and appropriate its usage. It is about a move away from the simplification of structure and form to one that deals with the real possibilities of expanding the dialogue of surface topology. Digital Ornament is a kinetic process rather than static, its intentions lie in returning the choice of bespoke materials back to the Architect, Designer and Artist.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	acadia20_594
id	acadia20_594
authors	Farahbakhsh, Mehdi; Kalantar, Negar; Rybkowski, Zofia
year	2020
title	Impact of Robotic 3D Printing Process Parameters on Bond Strength
doi	https://doi.org/10.52842/conf.acadia.2020.1.594
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 594-603.
summary	Additive manufacturing (AM), also known as 3D printing, offers advantages over traditional construction technologies, increasing material efficiency, fabrication precision, and speed. However, many AM projects in academia and industrial institutions do not comply with building codes. Consequently, they are not considered safe structures for public utilization and have languished as exhibition prototypes. While three discrete scales—micro, mezzo, and macro—are investigated for AM with paste in this paper, structural integrity has been tackled on the mezzo scale to investigate the impact of process parameters on the bond strength between layers in an AM process. Real-world material deposition in a robotic-assisted AM process is subject to environmental factors such as temperature, humidity, the load of upper layers, the pressure of the nozzle on printed layers, etc. Those factors add a secondary geometric characteristic to the printed objects that was missing in the initial digital model. This paper introduces a heuristic workflow for investigating the impacts of three selective process parameters on the bond strength between layers of paste in the robotic-assisted AM of large-scale structures. The workflow includes a method for adding the secondary geometrical characteristic to the initial 3D model by employing X-ray computerized tomography (CT) scanning, digital image processing, and 3D reconstruction. Ultimately, the proposed workflow offers a pattern library that can be used by an architect or artificial intelligence (AI) algorithms in automated AM processes to create robust architectural forms.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2022_102
id	caadria2022_102
authors	Gardner, Nicole, Haeusler, Matthias Hank, Yu, Daniel, Barton, Jack, Dunn, Kate and Huang, Tracy
year	2022
title	Revisiting Shoei Yoh: Developing a Workflow for a Browser-Based 3D Model Environment to Create an Immersive Digital Archive
doi	https://doi.org/10.52842/conf.caadria.2022.1.687
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 687-696
summary	The digitisation of architecturally significant buildings and sites creates opportunities to innovate methods of analysis, interpretation, representation, and audience engagement. To illustrate this potential, but also examine the attendant challenges, this paper outlines a research project that has digitised archival assets and living buildings designed by the Japanese architect Shoei Yoh to create an immersive 3D Spatial Archive. It focuses particularly on the creation of a browser-based 3D environment using WebGL technology that connects to and displays a repository of digitised archival assets. This includes the use of 3D scan data of Yoh's Naiju Community Centre project to accurately model the 3D immersive environment and a Grasshopper / Rhino into the glTF. File format (graphics library Transmission Format) workflow to render Naiju‚s complex geometry and detailed outdoor scenery. The paper demonstrates how using the .glTF File, which is an open format specifically for transmitting processed and pre-calculated 3D models, can improve the processing efficiency of web-browser based 3D environments. Improving the stability and processing speed of 3D browser-based environments is significant to enhancing how audiences can connect with and experience culturally significant sites remotely. The digital recreation and repurposing of Naiju (which is currently unoccupied and in a state of disrepair) as an immersive archival exhibition space operates to simultaneously protect the real building from over visitation, but also raise awareness of its cultural significance to support preservation efforts. In so doing, the paper makes a further contribution to the developing field of digital cultural heritage.
keywords	Digital Cultural Heritage, Browser-based Modelling, glTF File, Architectural Visualisation, Shoei Yoh, SDG 9, SDG 11
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	6e99
authors	Hoffer, Erin Rae
year	1992
title	Creating the Electronic Design Studio: Development of a Heterogeneous Networked Environment at Harvard's Graduate School of Design
doi	https://doi.org/10.52842/conf.ecaade.1992.225
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 225-240
summary	The migration of design education to reliance on computer-based techniques requires new ways of thinking about environments which can effectively support a diverse set of activities. Both from a spatial standpoint and a computing resource standpoint, design studios must be inevitably reconfigured to support new tools and reflect new ways of communicating. At Harvard's GSD, a commitment to incorporating computer literacy as a fundamental component of design education enables us to confront these issues through the implementation of a heterogeneous network imbedded in an electronic design environment. This evolving prototype of a new design studio, its development and its potential, will be the subject of this paper. A new style design environment is built upon an understanding of traditional techniques, and layered with an awareness of new tools and methods. Initially we borrow from existing metaphors which govern our interpretation of the way designers work. Next we seek to extend our thinking to include allied or related metaphors such as the library metaphor which informs collections of software and data, or the laboratory metaphor which informs workspace groupings, or the transportation metaphor which informs computer-based communications such as electronic mail or bulletin boards, or the utility services metaphor which informs the provision of network services and equipment. Our evaluation of this environment is based on direct feedback from its users, both faculty and students, and on subjective observation of the qualitative changes in communication which occur between and among these groups and individuals. Ultimately, the network must be judged as a framework for learning and evaluation, and its success depends both on its ability to absorb our existing metaphors for the process of design, and to prefigure the emerging metaphors to be envisioned in the future.
series	eCAADe
last changed	2022/06/07 07:50

_id	avocaad_2001_08
id	avocaad_2001_08
authors	Ivanka Iordanova, Temy Tidafi
year	2001
title	Design assistance by complexity-supporting precedents' modelling
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design processes imply complexity at every stage of the development of a project. On one hand, this complexity is rarely taken into consideration by the currently used CAD programs. On the other hand, recent theoretical researches indicate that a large proportion of architectural design processes are based on precedents as a source of inspiration or as a basis for reflection. A precedent is usually seen as a sketch, as a picture, as a drawing or as a visual memory of an architectural object or space. Recent research enlarges this concept into at least two directions: (1) precedents are looked for not only in the architectural space, and (2) it’s not only the visual aspect of a precedent that is important, but also its internal logic and structure, the know-how associated to it, and the actions needed for its creation. Usually, architectural design knowledge is implicitly presented by precedents. This design knowledge is applied to design-objects having various levels of generality, at different states of detailing and expected to be dynamically transformed during the following stages of design. Having in mind these characteristics of precedents called for during the architectural design process, we propose to join their visual representation with a description of their most important characteristics: structural organisation, way of production, functional organisation, spatial composition, etc. These can be either described or modelled by the original author, or interpreted by the precedent’s ‘user’. These design-knowledge models can be of use in several ways: (1) providing a library for search of precedents by semantic analogy, (2) offering ready-to-use capsules of design knowledge for new design situations, (3) enriching the ‘design world’ of the user-architect. We have implemented the proposed method of complexity-supporting precedents’ modelling by the means of the functional programming SGDL-Scheme language. The models (a programming function or a structure of programming functions) describe the actions necessary for the creation of an object (or its digital representation) and the structural organisation between the models in order to generate new, more complex ones. The concept of describing actions instead of shapes, provides a multi-level applicability of the models. Visual presentations (digital maquettes, images or animations) of newly generated objects can be stored in a visual-library of the assistant, thus creating a new ‘precedent’ that can be referred to in future by visual analogy. The design-knowledge that has generated the new object, is stored and linked to the image. Thus, the visual stimulus of a precedent can be joined with functional characteristics, production procedures and/or semantic meaning of the object. The paper will present the ‘engine’ of the proposed assistant, its organisation, as well as digital models of precedents that have served as a basis for the design of new architectural objects or structures. The assistant is conceived as an open, complexity supporting structure that can be further developed by the ‘user-architect’. We will discuss the advantages and limitations of the proposed assistant.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	554e
authors	Koutamanis, Alexander
year	2001
title	3 x 2 Approaches to Design Management
doi	https://doi.org/10.52842/conf.ecaade.2001.220
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 220-225
summary	Following the arguably successful introduction of building, project and real estate management to traditional architectural areas, design management is emerging as the new hot issue. One of the main arguments for it is the alleged low performance of the architect in the face of the technical complexity and operational intricacy that characterizes current design problems. In this respect, management is seen as the missing link in the architect’s methodical and operational framework. The paper suggests that this link derives more from the constraints of the domain and its subject matter rather than a management perspective. Design management refers to two main dimensions of architectural design, these of design method and of design subject. With respect to the first dimension we distinguish between three main categories: proscriptive, prescriptive and descriptive approaches. In the second dimension the distinction is between the coordination of the design process and that of the design product. The 3x2 matrix defined by these two dimensions stresses the significance of descriptive approaches for the informatization of the representation and communication of the design product. In this framework design information management emerges as an applied area of (computational) design theory that facilitates the amphidrome development of a design, i.e. not only from brief to postoccupancy but also from detail, case and precedent to design idea and solution, as well as the identification and management of critical moments, i.e. moments characterized by convergence of activities and hence extensive and intensive communication.
keywords	Method, Management, Descriptive, Informatization
series	eCAADe
email
last changed	2022/06/07 07:51

_id	6064
authors	Kramel, Herbert and Chen, Chen-Cheng
year	1991
title	BAU: A Knowledge-Based System for the Investigation of a Basic Architectural Unit
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 329-346
summary	The control of incremental complexities within an evolutionary design process has been a serious concern in both architectural education and practice. One method of examining this problem is to first define a "basic architectural unit" and a design environment which is composed of multiple units. Different levels of detail will be added to the unit as the design process continues. Secondly, a related computer program called BAU is introduced, which demonstrates that a computer is a meaningful tool for helping the architect to investigate the consequence of a design problem. Thirdly, both the domain expert's and the knowledge engineer's experiences during the development of BAU are described. Finally, the future direction of this research will be discussed.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	ecaade2017_130
id	ecaade2017_130
authors	Nagakura, Takehiko and Sung, Woongki
year	2017
title	Spatial Typology for BIM - Preassembling for Synthetic Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2017.1.129
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 129-136
summary	Contemporary Building Information Modeling (BIM) software provides basic component types such as bathtubs, desks, windows and walls that are available in many varieties of kinds and ready for drag-and-drop into a design project. However, the software is unlikely to provide higher level constructs such as bathrooms or offices as types, and these spatial concepts are largely unframed in the ontology of the building system. This paper looks at these spatial concepts left unframed in BIM as important fabric in the design process, examines how they are represented typologically in conventional design resources such as Neufert Architects' Data, and discusses strategies for embedding them in BIM. Together with abundant published cases of architectural designs, the examples of spatial forms in these resources play a role of Big Data. The paper then demonstrates a prototype of parametric office building typology embedded in BIM and illustrates how such a tool helps an architect to study volumetric layout on a given site. The approach tested leads to an idea of BIM imbued with a massive taxonomic library of preassembled spatial types and takes us a step closer to a symbiotic or synthetic architectural design process.
keywords	Building Information Modeling; Architectural Typology; Design Representation; Big Data; Synthetic Design
series	eCAADe
email
last changed	2022/06/07 07:59

_id	9e16
authors	Neuckermans, H., Heylighen, A. and Morisse, P.
year	2002
title	Visual Keys to Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2002.175
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 175-182
summary	This paper presents a new mechanism to access and interact with DYNAMO, a collective case base for architectural design developed as a Web-based tool. The system is fully operational since a few years in the context of architectural design education as well as for seminars on architectural theory. We have now developed a set of visual keys structured at the one hand according to the Vitruvian tripartition of architecture: Firmitas (structure, materials,…), Utilitas (building programme,…), Venustas (formal qualities/articulation, spatial configuration,…) to which we added Context (topography, site, budget, climate,...) as a supplementary dimension, and at the other hand including three levels of detail: single spaces, building blocks or master plan entities. Visual keys match the architect’s designerly way of thinking. The visual keys are in fact nothing else than a graphical codification of architecture within the realm of architectural composition. The software, that has been developed so far, does not only allow users to access cases via the keys we have implemented, but it also provides a tool to sketch and submit their own keys.
series	CAADRIA
email
last changed	2022/06/07 07:58

For more results click below: