Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 501

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2011_061
id	caadria2011_061
authors	Celani, Gabriela; José P. Duarte and Carlos V. Vaz
year	2011
title	The gardens revisited: The link between technology, meaning and logic?
doi	https://doi.org/10.52842/conf.caadria.2011.643
source	Proceedings of the 16th International Conference on Computer Aided Architectural Design Research in Asia / The University of Newcastle, Australia 27-29 April 2011, pp. 643-652
summary	The objective of this paper is to compare the computational concepts present in three books published by Mitchell between 1987 and 1990: The art of computer-graphics programming (1987), which has Robin Liggett and Thomas Kvan as co-authors, The logic of architecture (1990), probably his most influential work, and The poetics of gardens (1988), which has Charles Moore and William Turnbull as coauthors. By looking at the concepts that are presented in the three books and establishing a comparison between them, we expect to show that The poetics of Gardens should not be seen as a detour from Mitchell´s line of research, but rather as a key piece for understanding the relationship between technology, meaning and logic in his very coherent body of work.
keywords	Computational design concepts; technology; meaning; logic
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ijac202119301
id	ijac202119301
authors	Doyle, Shelby Elizabeth; Senske, Nick S.
year	2021
title	SOM’s Computer Group: Narratives of women in early architectural computing
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 3, 213–225
summary	Cultural narratives of digital technology in architecture rely heavily upon stories of unique, almost always male, genius and often deny the collective intellectual labor of technology’s construction. These narratives are perpetuated by a historical record which does not fully address the contributions of women to the history of digital technology. Because this history is not well-documented, there is an opportunity to represent these events in a manner which is more inclusive and equitable. Toward that end, this article focuses on narratives from the SOM Computing Group (1964–1990), as a means of correcting the historical record and addressing gender equity in the profession. The interviews collected here highlight several women who helped to integrate technologies into architecture through professional experimentation and cross-disciplinary collaboration. While it is not a comprehensive history, this work represents the beginning of an agenda to produce a history of technology in architecture which better reflects the contributions of women to the digital designs of today.
keywords	History of architectural computing, gender equality, SOM Computer Group, women in architecture
series	journal
email
last changed	2024/04/17 14:29

_id	0642
authors	Eastman, Charles M.
year	1989
title	Why Are We Here and Where We are Going: The Evolution of CAD
doi	https://doi.org/10.52842/conf.acadia.1989.009
source	New Ideas and Directions for the 1990’s [ACADIA Conference Proceedings] Gainsville (Florida - USA) 27-29 October 1989, pp. 9-26
summary	This paper reviews architectural CAD in terms of its current use, development and status within the U.S. The characteristics of a new generation of architectural CAD system, called building modeling, are outlined. Criteria are developed for the evaluation of CAD systems that support building modeling. Some of the opportunities for universities growing out of building modeling are reviewed, including pedagogical implications and opportunities for research.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	8b27
authors	Eastman, Charles M.
year	1990
title	Vector Versus Raster : A Functional Comparison of Drawing Technologies
source	IEEE Computer Graphics and Applications. September, 1990. vol. 10: pp. 68-80 : ill. includes bibliography
summary	Raster drawing systems have emerged as an alternative to more traditional vector-based CAD drafting systems. With engineering drawing in mind, the author compares the functional capabilities of these two technologies and explores means for integrating the best features of both. The characteristics examined are not those of any particular raster or vector implementation but are derived from the underlying technologies
keywords	CAD, drawings, systems, technology, scanning, computer graphics
series	CADline
email
last changed	2003/05/17 10:15

_id	e892
authors	Kacmar, Charles John
year	1990
title	PROXHY: a Process -Oriented Extensible Hypertext Architecture
source	Texas A&M University
summary	This research describes a new architecture for hypertext environments. The architecture merges the process, object-oriented, and hypertext models to provide hypertext services to object-based, distributed, application components. Through this architecture, applications are integrated to form a comprehensive hypertext computing environment, allowing links to connect applications or objects in different applications. The architecture separates hypertext and application functionality so that multiple applications can use the facilities of a common hypertext layer. The design of the architecture is such that components can be extended or tailored in order to support future applications, multimedia objects, or the needs of specific applications or users. The process-based, object-oriented framework allows objects of arbitrary complexity to live and interact in a hypertext world. Additionally, the protocol and facilities which support component interaction provide location transparency, arbitrary object granularity, and parallel computation over a network. This dissertation provides a conceptual model of hypertext and a general architecture for hypertext system construction. Related literature from object-oriented programming, operating systems, multimedia applications, and database is discussed in terms of the architecture. A hypertext data model, computational model, and hypertext system taxonomy are used to discuss the capabilities of current hypertext systems. Interaction scenarios are provided in order to illustrate object interaction and the distribution of work among the components of the architecture. A prototype system, implemented to demonstrate the feasibility of the architecture, is discussed. The prototype illustrates all aspects of the architecture including distributed application and hypertext components, cross-application linking, and anchors acting as proxy objects for applications. Application scenarios, problems and limitations, and future research issues provide an understanding of the power of the architecture and its potential for impacting the design of next-generation hypertext systems.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	4004
authors	Lawson, Bryan
year	1990
title	How designers think: the design process demystified
source	University Press, Cambridge
summary	How Designers Think is based on Bryan Lawson's many observations of designers at work, interviews with designers and their clients and collaborators. This extended work is the culmination of twenty-five years' research and shows the author's belief that we all can learn to design better. The creative mind continues to have power to surprise and this book aims to nurture and extend this creativity. This book is not intended as an authoritative description of how designers should think but to provide helpful advice on how to develop an understanding of design. 'How Designers Think' will be of great interest, not only to designers seeking a greater insight into their own thought processes, but also to students of design in general from undergraduate level upward.
series	other
email
last changed	2003/04/23 15:14

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	450c
authors	Akin, Ömer
year	1990
title	Computational Design Instruction: Toward a Pedagogy
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 302-316
summary	The computer offers enormous potential both in and out of the classroom that is realized only in limited ways through the applications available to us today. In the early days of the computer it was generally argued that it would replace the architect. When this idea became obsolete, the prevailing opinion of proponents and opponents alike shifted to the notion of the computer as merely adding to present design capabilities. This idea is so ingrained in our thinking that we still speak of "aiding" design with computers. It is clear to those who grasp the real potential of this still new technology - as in the case of many other major technological innovations - that it continues to change the way we design, rather than to merely augment or replace human designers. In the classroom the computer has the potential to radically change three fundamental ingredients: student, instruction, and instructor. It is obvious that changes of this kind spell out a commensurate change in design pedagogy. If the computer is going to be more than a passive instrument in the design studio, then design pedagogy will have to be changed, fundamentally. While the practice of computing in the studio continues to be a significant I aspect of architectural education, articulation of viable pedagogy for use in the design studio is truly rare. In this paper the question of pedagogy in the CAD studio will be considered first. Then one particular design studio taught during Fall 1988 at Carnegie Mellon University will be presented. Finally, we shall return to issues of change in the student, instruction, and instructor, as highlighted by this particular experience.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	849b
authors	Amiel, Maurice
year	1991
title	NOTES ON IN-SITU – FULL-SCALE EXPERIMENTATION AND THE DESIGN PROFESSIONS
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 40-43
summary	In the north american academic context a workshop is different from a paper session in that it is simply an opportunity to exchange ideas and to raise questions among colleagues who can bring to bear in their discussion various points of view and experiences otherwise unavailable.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:18

_id	diss_anders
id	diss_anders
authors	Anders, P.
year	2003
title	A Procedural Model for Integrating Physical and Cyberspaces in Architecture
source	Doctoral dissertation, University of Plymouth, Plymouth, U.K
summary	This dissertation articulates opportunities offered by architectural computation, in particular the digital simulation of space known as virtual reality (VR) and its networked, social variant cyberspace. Research suggests that environments that hybridize technologies call for a conception of space as information, i.e. space is both a product of and tool for cognition. The thesis proposes a model whereby architecture can employ this concept of space in creating hybrids that integrate physical and cyberspaces.The dissertation presents important developments in architectural computation that disclose concepts and values that contrast with orthodox practice. Virtual reality and cyberspace, the foci of this inquiry, are seen to embody the more problematic aspects of these developments. They also raise a question of redundancy: If a simulation is good enough, do we still need to build? This question, raised early in the 1990's, is explored through a thought experiment - the Library Paradox - which is assessed and critiqued for its idealistic premises. Still, as technology matures and simulations become more realistic the challenge posed by VR/cyberspace to architecture only becomes more pressing. If the case for virtual idealism seems only to be strengthened by technological and cultural trends, it would seem that a virtual architecture should have been well established in the decade since its introduction.Yet a history of the virtual idealist argument discloses the many difficulties faced by virtual architects. These include differences between idealist and professional practitioners, the failure of technology to achieve its proponents' claims, and confusion over the meaning of virtual architecture among both architects and clients. However, the dissertation also cites the success of virtual architecture in other fields - Human Computer Interface design, digital games, and Computer Supported Collaborative Work - and notes that their adoption of space derives from practice within each discipline. It then proposes that the matter of VR/cyberspace be addressed from within the practice of architecture, a strategy meant to balance the theoretical/academic inclination of previous efforts in this field.The dissertation pursues an assessment that reveals latent, accepted virtualities in design methodologies, instrumentation, and the notations of architectural practices. Of special importance is a spatial database that now pervades the design and construction processes. The unity of this database, effectively a project's cyberspace, and its material counterpart is the subject of the remainder of the dissertation. Such compositions of physical and cyberspaces are herein called cybrids. The dissertation examines current technologies that cybridize architecture and information technology, and proposes their integration within cybrid wholes. The concept of cybrids is articulated in seven principles that are applied in a case study for the design for the Planetary Collegium. The project is presented and critiqued on the basis of these seven principles. The dissertation concludes with a discussion of possible effects of cybrids upon architecture and contemporary culture.
series	thesis:PhD
email
last changed	2005/09/09 12:58

_id	4d0d
authors	Angelil, Mark
year	1990
title	Experiments as Modus Operandi
source	Journal of Architectural Education. November, 1990. Vol. 44: pp. 37-48 : 9 p. of ill
summary	Architecture has for too long focused on the presentation of pristine objects and the presentation in drawing form. A critical understanding of the field, however, necessitates a reevaluation of the roles of the process involved in the production of building. Rather than emphasizing surface appearances, an architecture rooted in process aims ultimately at revealing the fundamental and deep structures inherent within the making of architecture. One of the primary tasks of the process is to provoke intuition and ingenuity - and the awareness that both are founded on knowledge - and that knowledge must be applied with imagination. The experiment presented here developed sequentially with a defined structure to the process of design, moving gradually from the abstract into the concrete, thereby attempting and understanding of what Roland Barthes identified as 'concrete abstraction.'
keywords	design process, architecture, knowledge, experimentation
series	CADline
last changed	1999/02/12 15:07

_id	e90b
authors	Arbab, Farhad
year	1990
title	Set Models and Boolean Operations for Solids and Assemblies
source	IEEE Computer Graphics and Applications November, 1990. vol. 10: pp. 76-86 : ill. includes bibliography.
summary	Application of solid modeling in computer-aided design, computer-aided manufacturing, and robotics often involve aggregates or assembling of disconnected pieces. This article presents an alternative CSG-like formalism based on open sets, in which both assemblies and connected pieces are modeled as points sets. Consequently, the same Boolean operations apply uniformly to connected pieces and assemblies
keywords	assemblies, CSG, solid modeling, boolean operations
series	CADline
last changed	1999/02/12 15:07

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	afa0
authors	Aziz, N.M., Bata, R. and Sudarshan, B.
year	1990
title	Bezier Surface : Surface Intersection
source	IEEE Computer Graphics and Applications. January, 1990. vol. 10: pp. 50-58
summary	In this article the authors explain the computational requirement and accuracy of two methods for finding the intersection of Bezier surfaces. In both methods, the existence of an intersection curve is confirmed by using the convex hull property of such surfaces. The first method evaluates the intersection by recursive subdivision of two patches with overlapping hulls. The second method detects a point on the intersection curve, then incrementally traces the intersection in the parametric spaces of the two surfaces. With both methods the intersection of a pair of first-order planar patches must be solved analytically. The intersection is approximated by first-order Bezier patches in the first case, and by planar triangles in the second. Overall, the method of incremental tracing gives more accurate results than the method of recursive subdivision
keywords	recursion, curves, convex hull, curved surfaces, intersection, Bezier, triangulation
series	CADline
last changed	2003/06/02 14:42

_id	4ac0
authors	Balachandran, M. B. and Gero, John S.
year	1990
title	Knowledge Engineering and Multicriteria Optimization
source	Berlin: Springer-Verlag, 1990. pp. 115-147. CADLINE has abstract only
summary	Many aspects of optimization, including problem formulation, algorithm selection and the interpretation of results require human judgment and experience, and are traditionally carried out by humans. Recently developed knowledge-based system methodologies now allow us to incorporate different forms of knowledge required to carry out such non-numeric tasks. The role and effectiveness of knowledge-based methodologies in multicriteria optimization are described and illustrated with examples
keywords	design, multicriteria, optimization, knowledge base
series	CADline
email
last changed	2003/06/02 13:58

_id	044f
authors	Balachandran, M.B. and Gero, John S.
year	1990
title	Role of Prototypes in Integrating Expert Systems and CAD Systems
source	Berlin: Springer-Verlag, 1990. v: Design: pp. 195-211
summary	This paper describes concepts which allow the development of integrated systems that combine the two technologies of expert systems and computer-aided drafting systems. It demonstrates how an expert system can be used for evaluating and criticizing designs described using traditional CAD packages. The notion of 'prototypes' has been used to play the central role in such an integration. The development, implementation and operation issues of an integrated system, called IPEXCAD, are described
keywords	expert systems, prototypes, design, CAD, integration, drafting
series	CADline
email
last changed	2003/06/02 13:58

_id	067e
authors	Banz, George
year	1990
title	Expert Systems and Artificial Intelligence in Real Estate Development Planning
source	CIB W55/W66 Joint Symposium. 1990. 7 p. : ill. includes bibliography. -- Abstracts in English and French
summary	Expert systems and artificial intelligence can contribute substantially to the quality of real-estate development analysis. 'A. I. coaches' help correlate input and check the validity of schedules. Expert systems enhance life cycle cost analysis. Property value indicators become viable when used in conjunction with remote sensing and life style mapping
keywords	economics, life cycle, expert systems, analysis
series	CADline
last changed	1999/02/12 15:07

_id	969c
authors	Barnes, Thomas
year	1990
title	Dynamic Interaction of Solids as a Design Tool
doi	https://doi.org/10.52842/conf.acadia.1990.029
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 29-40
summary	Architectural form and order can sometimes be described as having dynamic characteristics. To capitalize on this notion, physical qualities (mass, velocity, material elasticity, and friction) are given to objects. The objects are set in motion and allowed to interact at will with each other and their environment. The physical qualities are the rules that govern the outcome of interactions. As a result, interactions can lead to affine transformations (translate, scale, rotate), reformations (topological editing), and/or deformations (geometrical editing) of the objects. The designer can investigate the effects of interaction between dynamic elements, vary their physical qualities, and evaluate the appropriateness of the outcome as a solution to the design problem.
series	ACADIA
last changed	2022/06/07 07:54

_id	29d2
authors	Barsky, Brian A. and DeRose,Tony D.
year	1989
title	Geometric Continuity of Parametric Curves: Three Equivalent Characterizations
source	IEEE Computer Graphics and Applications. November, 1989. vol. 9: pp. 60-68 : ill. includes bibliography
summary	Geometric continuity of curves has received a good deal of research attention in recent years. The purpose of this article is to distill some of the important basic results into a self-contained presentation. The January 1990 issue of CG&M presents a paper that continues the discussion by offering applications of the theoretical background provided here
keywords	continuity, parametrization, curves, computational geometry, representation
series	CADline
last changed	2003/06/02 13:58

For more results click below: