Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 15906

Reformat results as: short short into frame detailed detailed into frame

_id	acadia10_263
id	acadia10_263
authors	Beaman, Michael Leighton; Bader, Stefan
year	2010
title	Responsive Shading \| Intelligent Façade Systems
doi	https://doi.org/10.52842/conf.acadia.2010.263
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 263-270
summary	As issues of sustainability gain traction for architects, methodologies for designing, analyzing, and calibrating design solutions have emerged as essential areas of research and development. A number of approaches have been pursued with regard to embedding data into the design process, most fall into one of two approaches to research. The first approach is to mediate environmental impact at the level of applied technology; the second alters building methods and material construction, generating efficient energy use. However, few approaches deal with the crafting of relationships between information and performance on an architectural level. We will examine an approach focused on understanding how crafting relationships between information and design can move architecture towards achieving sustainability. In developing this approach, we created a data-driven design methodology spanning from design inception to construction. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. By contextualizing the solutions generated, we were able design though a set of specific and controlled responses rather than as a singular solution. Information utilization requires a new kind of craft that moves beyond instances into relationships and offers performance sensitive issues in design a focused trajectory. We applied this method to the research and development of a responsive shading structure built in conjunction with a thermal testing lab for two test locations – Austin, Texas (Figure. 1 and 2) and Munich, Germany. The following paper chronicles the design and construction at the Texas site over an academic semester.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2020_196
id	sigradi2020_196
authors	Saucedo, Santiago; Tosello, María Elena
year	2020
title	Bioclimatic generative design: energy optimizing skins
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 196-202
summary	Efficiency in the use of energy is one of the needs of contemporary times. Using the new instruments to bioclimatic design, opens up new possibilities. This study aimed to design generative processes that allow us to determine the best locations for different envelopes, through digital simulations related to a real environment. Being an investigation for design purposes, three types of actions were carried out: analyze, project and evaluate. The activities are developed from the logics of the parametric design; therefore, the processes are dynamic and allow variations, being able to be adjusted and repeated in any location in the world.
keywords	Parametric design, Dynamic system, Design processes, NURBS, Sustainable architecture
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	acadia08_102
id	acadia08_102
authors	Beaman, Michael
year	2008
title	Bio-complexity: Instructing with Relational Generatives
doi	https://doi.org/10.52842/conf.acadia.2008.102
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 102-109
summary	This paper will discuss the use of complex systems in analyzing biological precedence of self-organizing, self-stabilizing and emergent phenomenon. The use of complex biological systems will be used to define relational models that avoid issues of scale. Scalability (the ability to traverse scales) will be presented as a relational construct through the use of scope, not scale. The analysis of biological formation and organization as a relational model defined by scope will be presented as a generative in forming design strategies and solutions and will be illustrated in four undergraduate-level architecture studio projects.
keywords	Complexity; Generative; Scripting; Self-Organization; Simulation
series	ACADIA
last changed	2022/06/07 07:54

_id	ecaade2018_377
id	ecaade2018_377
authors	Beaudry Marchand, Emmanuel, Dorta, Tomás and Pierini, Davide
year	2018
title	Influence of Immersive Contextual Environments on Collaborative Ideation Cognition - Through design conversations, gestures and sketches
doi	https://doi.org/10.52842/conf.ecaade.2018.2.795
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 795-804
summary	In the design studio, Virtual Reality (VR) has mainly been included as a visualization tool to explore pre-designed ideas developed in traditional 3D software or using pen on paper. Meanwhile, a reshaping of the design process has been taking place, bringing forward interaction/experiential concerns and co-design approaches throughout disciplines in a push for a more thorough consideration of projects' contexts. This paper reports an exploratory study of how immersive contextual representations influence the co-ideation process. Audio-video recordings of co-ideation sessions (9) from a pedagogical studio were analyzed through verbal and representational (sketches and design gestures) exchanges as occurring in three different conditions: (a) pen on paper, immersive headset-free VR (b) without, and (c) with the use of contextual immersive environment (photogrammetric scans and 3D models). Results show that, although design conversations were similar across all conditions, design gestures were more often directly related to- than independent from the graphical representation only when using an immersive contextual environment. Furthermore, the rate of sketching episodes in general and sketching explanations were considerably lower in this condition. This could imply that use of pre-made context greatly reduces the need of sketching elements to support a clearer co-ideation.
keywords	Immersive context; Design gestures; Design conversations; Sketches; Co-design studio; Design cognition
series	eCAADe
email
last changed	2022/06/07 07:54

_id	8461
authors	Saunders, Rob
year	2002
title	Curious Design Agents and Artificial Creativity - A Synthetic Approach to the Study of Creative Behaviour
source	The University of Sydney, Faculty of Architecture
summary	Creative products are generally recognised as satisfying two requirements: firstly they are useful, and secondly they are novel. Much effort in AI and design computing has been put into developing systems that can recognise the usefulness of the products that they generate. In contrast, the work presented in this thesis has concentrated on developing computational systems that are able to recognise the novelty of their work. The research has shown that when computational systems are given the ability to recognise both the novelty and the usefulness of their products they gain a level of autonomy that opens up new possibilities for the study of creative behaviour in single agents and the emergence of social creativity in multi-agent systems. The work presented in this thesis has developed a model of curiosity in design as the selection of design actions with the goal of generating novel artefacts. Agents that embody this model of curiosity are called “curious design agents”. The behaviour of curious design agents is demonstrated with a range of applications to visual and nonvisual design domains. Visual domains include rectilinear drawings, Spirograph patterns, and “genetic artworks” similar to the work of Karl Sims. Non-visual domains include an illustrative abstract design space useful for visualising the behaviour of curious agents and the design of doorways to accommodate the passage of large crowds. The design methods used in the different domains show that the model of curiosity is applicable to models of designing by direct manipulation, parametric configuration or by using a separate design tool that embodies the generative aspects of the design process. In addition, an approach to developing multi-agent systems with autonomous notions of creativity called artificial creativity is presented. The opportunities for studying social creativity in design are illustrated with an artificial creativity system used to study the emergence of social notions of whom and what are creative in a society of curious design agents. Developing similar artificial creativity systems promises to be a useful synthetic approach to the study of socially situated, creative design.
series	thesis:PhD
email
last changed	2003/05/06 11:33

_id	409f
authors	Becker, Joseph D.
year	1987
title	Arabic Word Processing
source	communications of the ACM. July, 1987. vol. 30: pp. 600-610 : ill. includes bibliography
summary	The technology of word processing in the Middle East recently developed a word processing software that can correctly format the cursive, interacting letters of the Arabic script. Moreover, new layout procedures can automatically intermix right-to-left Arabic or Hebrew writing with left-to-right text in European or other languages. The design presented in this article is embodied in the Xerox View Point Documenter, but its principles apply equally well to any Arabic desktop publishing
keywords	software, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	ijac201614103
id	ijac201614103
authors	Savov, Anton; Oliver Tessmann and Stig Anton Nielsen
year	2016
title	Sensitive Assembly: Gamifying the design and assembly of fac?ade wall prototypes
source	International Journal of Architectural Computing vol. 14 - no. 1, 30-48
summary	The article describes a method for gamifying the design and assembly of computationally integrated structures built out of discrete identical blocks. As a case study, the interactive installation Sensitive Assembly was designed and built at the Digital Design Unit (Prof. Dr Oliver Tessmann) at the Technische Universita?t of Darmstadt and exhibited during the digital art festival NODE 2015 in Frankfurt in 2015. Sensitive Assembly invites people to play a Jenga-like game: starting from a solid wall, players are asked to remove and replace the installation’s building blocks to create windows to a nurturing light while challenging its stability. A computational system that senses the current state of the wall guides the physical interaction and predicts an approaching collapse or a new light beam breaking through. The installation extends the notion of real-time feedback from the digital into the physical and uses machine-learning techniques to predict future structural behaviour.
keywords	Gamification, prediction, feedback, interaction, assembly
series	journal
last changed	2016/06/13 08:34

_id	2006_868
id	2006_868
authors	Becker, Mirco
year	2006
title	Branches and Bifurcations - Building a framework for modeling with isosurfaces in Generative Components
doi	https://doi.org/10.52842/conf.ecaade.2006.868
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 868-873
summary	An isosurface is a three-dimensional representation of a constant value of a field function within a given volume. They are normally used in computer graphics to visualize data in fluid dynamics, medical imaging, geophysics, and meteorology. The advantage of isosurfaces is that they can represent all sorts of topologies. That makes them a perfect tool for modeling, branching, forking, and bifurcating objects with smooth transitions. As they work of a field function, the surface is implicit, the polygonization an approximation. This is a good base for coupling performance with precision. The task was to define a set of handles to change and model an isosurface. It had to happen through the modeling of the field function in a way that is rather intuitive but without giving up the precision one is used to have from standard NURBS/BREP modeling. The paper shows how a modeling framework for isosurfaces is implemented as a plug-in for Bentley Systems Generative Components allowing an intuitive way of exploring design variations. The implementation is illustrated with a proof of concept showing a sketch design.
keywords	Isosurface; Polygonization; Scalar field; Marching Cube; Generative Components
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2da9
authors	Becker, R.
year	1999
title	Introduction
source	Automation in Construction 8 (4) (1999) pp. 375-376
summary	The Performance Concept provides a philosophical framework for building design and construction, that is flexible and technically non-prescriptive, but altogether ensures building quality and satisfaction of user demands and expectations.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	caadria2022_357
id	caadria2022_357
authors	Bedarf, Patrick, Szabo, Anna, Zanini, Michele, Heusi, Alex and Dillenburger, Benjamin
year	2022
title	Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
doi	https://doi.org/10.52842/conf.caadria.2022.2.061
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 61-70
summary	This paper presents the design and fabrication of a lightweight composite concrete slab prototype using 3D printing (3DP) of mineral foams. Conventionally, concrete slabs are standardized monolithic elements that are responsible for a large share of used materials and dead weight in concrete framed buildings. Optimized slab designs require less material at the expense of increasing the formwork complexity, required labour, and costs. To address these challenges, foam 3D printing (F3DP) can be used in construction as demonstrated in previous studies for lightweight facade elements. The work in this paper expands this research and uses F3DP to fabricate the freeform stay-in-place formwork components for a material-efficient lightweight ribbed concrete slab with a footprint of 2 x 1.3 m. For this advancement in scale, the robotic fabrication and material processing setup is refined and computational design strategies for the generation of advanced toolpaths developed. The presented composite of hardened mineral foam and fibre-reinforced ultra-high-performance concrete shows how custom geometries can be efficiently fabricated for geometrically complex formwork. The prototype demonstrates that optimized slabs could save up to 72% of total concrete volume and 70% weight. The discussion of results and challenges in this study provides a valuable outlook on the viability of this novel fabrication technique to foster a sustainable and resourceful future construction culture.
keywords	robotic 3d-printing, mineral foam, stay-in-place formwork, concrete composite, SDG 12
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	ijac202321301
id	ijac202321301
authors	Bedarf, Patrick; Anna Szabo; Enrico Scoccimarro; Benjamin Dillenburger
year	2023
title	Foamwork: Challenges and strategies in using mineral foam 3D printing for a lightweight composite concrete slab
source	International Journal of Architectural Computing 2023, Vol. 21 - no. 3, 388–403
summary	This paper presents an innovative design and fabrication workflow for a lightweight composite slab prototype that combines mineral foam 3D printing (F3DP) and concrete casting. Non-standardized concrete elements that are geometrically optimized for resource efficiency often result in complex shapes that are difficult to manufacture. This paper extends the research in earlier studies, showing that F3DP can address this challenge. F3DP is used to construct 24 stay-in-place formwork elements for a lightweight, resource-efficient ribbed concrete element with a 2 × 1.3 m footprint. This advancement highlights the improved robotic F3DP setup, computational design techniques for geometry and print path generation, and strategies to achieve near-netshape fabrication. The resulting prototype shows how complex geometries that were previously costprohibitive can be produced efficiently. Discussing the findings, challenges, and future improvements offers useful perspectives and supports the development of this resourceful and sustainable construction technique.
keywords	robotic 3D printing, mineral foam, stay-in-place formwork, concrete composite, SDG12 responsible consumption and production
series	journal
last changed	2024/04/17 14:30

_id	ddss9409
id	ddss9409
authors	Beekman, Solange and Rikhof, Herman G.A.
year	1994
title	Strategic Urban Planning in the Netherlands
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Since the mid-1980s, several Dutch towns have initiated many urban planning and design activities for their existing area. This represented a shift in that previous urban planning projects typicallyconcerned expansion in the outskirts of the city, or urban renewal. The complex and expensive renovation of the existing housing stock rarely allowed a deep interest in urban design. Since 1985, attention shifted from the housing stock to the city as a whole. Furthermore, public andprivate actors increasingly become involved in the planning process. It became clear that a more comprehensive plan for the whole existing town or region was needed. Conventional planning instruments were considered ill-suited for this new challenge. The paper discusses promising attempts of various urban planning instruments to get a stronger but also more flexible hold on thetransformation of the urban planning area in the Netherlands. These new planning instruments have three common characteristics: (i) they give special attention to the different levels of urban management needed for different urban areas, (ii) these strategic plans provide an integral view on the urban developments, and (iii) these plans introduce a new strategy to deal with both private initiatives to transform urban sites and monitor wishes, proposals, etc. from inhabitants in the neighbourhoods. A comparative analyses of several cities indicates, however, that, in addition to these common characteristics, major differences between their strategic plans exist depending upon their historic patrimonium, economic status and planning tradition.
series	DDSS
email
last changed	2003/08/07 16:36

_id	lasg_whitepapers_2019_001
id	lasg_whitepapers_2019_001
authors	Beesley, Philip
year	2019
title	Introduction; Living Architecture Systems Notes on Progress
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp. 001 - 009
summary	Notes on progress regarding the Living Architecture Systems Group
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	lasg_whitepapers_2019_fulltext
id	lasg_whitepapers_2019_fulltext
authors	Beesley, Philip; Sascha Hastings and Sarah Bonnemaison (editors)
year	2019
title	Living Architecture Systems Group White Papers 2019
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019.
summary	Essays, interviews and images that provide an overview of current research being done by contributors to the Living Architecture Systems Group (LASG).
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	6317
id	6317
authors	Beheshti, R., Tolman, F. and van der Veer, P.
year	2001
title	DESIGN AND BUILDING INFORMATICS RESEARCH
source	Achten, H.H., de Vries, B. and Hennessey, J. (eds). Design Research in the Netherlands 2000, 143-154
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2000_Beheshti_EtAl.pdf
last changed	2005/10/12 15:41

_id	8741
id	8741
authors	Beheshti, R.
year	2001
title	DOMAINS OF DESIGN RESEARCH
source	Achten, H.H., de Vries, B. and Hennessey, J. (eds). Design Research in the Netherlands 2000, 1-7
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2000_Beheshti.pdf
last changed	2005/10/12 15:31

_id	cf2005_1_69_73
id	cf2005_1_69_73
authors	BEILHARZ Kirsty
year	2005
title	Responsive Sensate Environments: Past and Future Directions
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 361-370
summary	This paper looks at ways in which recent developments in sensing technologies and gestural control of data in 3D space provide opportunities to interact with information. Social and spatial data, the utilisation of space, flows of people and dense abstract data lend themselves to visual and auditory representation to enhance our understanding of socio-spatial patterns. Mapping information to visualisation and sonification leads to gestural interaction with information representation, dissolving the visibility and tangibility of traditional computational interfaces and hardware. The purpose of this integration of new technologies is to blur boundaries between computational and spatial interaction and to transform building spaces into responsive, intelligent interfaces for display and information access.
keywords	responsive environments, sensate space, sonification, visualisation, gestural controllers
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	2005_763
id	2005_763
authors	Beilharz, Kirsty
year	2005
title	Architecture as the Computer Interface: 4D Gestural Interaction with Socio-Spatial Sonification
doi	https://doi.org/10.52842/conf.ecaade.2005.763
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 763-770
summary	Architecture today extends far beyond designing building shells and material, peripheral boundaries. Arguably, it has always been, and shifts increasingly in contemporary environments towards, designing space and interaction with space. Hence, the role of the designer includes integration of computing in architecture through ambient display and non-tactile interaction. This paper explores a framework in which the architecture is the computer interface to information sonification. (Sonification is automatically generated representation of information using sound). The examples in this paper are Emergent Energies, demonstrating a socio-spatially responsive generative design in a sensate environment enabled by pressure mats; Sensor-Cow using wireless gesture controllers to sonify motion; and Sonic Kung Fu which is an interactive sound sculpture facilitated by video colour-tracking. The method in this paper connects current information sonification methodologies with gesture controller capabilities to complete a cycle in which gestural, non-tactile control permutes and interacts with automatically-generated information sonification. Gestural pervasive computing negotiates space and computer interaction without conventional interfaces (keyboard/mouse) thus freeing the user to monitor or display information with full mobility, without fixed or expensive devices. Integral computing, a blurring of human-machine boundaries and embedding communication infrastructure, ambient display and interaction in the fabric of architecture are the objectives of this re-thinking.
keywords	Interactive Sonification, Gesture Controllers, Responsive Spaces, SpatialSound
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia22_418
id	acadia22_418
authors	Scheder-Bieschin, Lotte; Van Mele, Tom; Block, Philippe
year	2022
title	Curved-crease Folding of Bending-active Plates as Formwork
source	ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 418-431.
summary	This research introduces curved-crease folding (CCF) of bending-active plates as a flexible, lightweight, and reusable formwork system for shaping corrugated concrete shell structures. CCF is extended to an initially closed configuration that unfolds initially-planar bending-active strips into a 3D formwork when actuated on-site. The curved creases control the shape and structurally stiffen the formwork shaping a concrete shell structure with stiffening corrugations.
series	ACADIA
type	paper
email
last changed	2024/02/06 14:04

_id	ecaade2018_237
id	ecaade2018_237
authors	Beir?o, José, Mateus, Nuno and Siopa Alves, Jo?o
year	2018
title	Modular, Flexible, Customizable Housing and 3D Printed - An experiment in architectural education
doi	https://doi.org/10.52842/conf.ecaade.2018.1.381
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 381-390
summary	Technological developments in construction always bring new expectations in terms of design possibilities. The use of digital tools both in design exploration and applied to explore new forms of computer controlled manufacture provide opportunities for the emergence of new tectonics. Because these transformations change our construction reality fast and with impacts never seen before, it is important that architectural education follows such change and prepares students for what will be their future really, making them capable to accept and incorporate the tectonic implications of digital tools and construction methods in the way they design. This paper shows a tutored approach to mass customized housing resorting to 3D printed parametric modular construction.Please write your abstract here by clicking this paragraph.
keywords	caad education; mass customization; 3D printed housing
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: