Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 17112

Reformat results as: short short into frame detailed detailed into frame

_id	e077
authors	Koutamanis, Alexander
year	1998
title	Designing with the Computer: The Influence of Design Practice and Research
doi	https://doi.org/10.52842/conf.ecaade.1998.091
source	Computers in Design Studio Teaching [EAAE/eCAADe International Workshop Proceedings / ISBN 09523687-7-3] Leuven (Belgium) 13-14 November 1998, pp. 91-97
summary	The paper describes the setup and development of an advanced course in CAAD in the framework of a particular teaching environment and the democratization of computing technologies. It traces the transformation of goals and means for the course as a result of changing priorities and interests towards a form that agrees with emerging cultural patterns as observed in architectural education.
series	eCAADe
email
more	http://www.eaae.be/
last changed	2022/06/07 07:51

_id	7e64
authors	Koutamanis, Alexander
year	1999
title	Approaches to the Integration of CAAD Education in the Electronic Era: Two Value Systems
doi	https://doi.org/10.52842/conf.ecaade.1999.238
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 238-243
summary	In recent years the democratization of information and communication technologies (ICT) has become the greatest influence on the structure of CAAD education. While the content of the CAAD courses simply had to absorb the new technological possibilities, the structure of the courses and in particular their relationship to the rest of the curriculum has become the subject of speculation and experimentation. Integration of CAAD education in an architectural curriculum occurs either by (a) placing emphasis on designing in CAAD courses, or by (b) integrating computing in design courses. Both approaches respond to the democratization of ICT by making design computing widely available and acceptable. Further improvement is possible if the student becomes the carrier of integration. This is based on the long-term amplification of two value systems. The first refers to personal cognition: rather than rewarding a student with the teacher's approval, educational goals should be translated into individual skills and knowledge. The second system addresses the values of the peer group: such groups support learning by comparison to other individuals and emerging communal characteristics, either as a result of competition or for reasons of assimilation.
keywords	Education, Democracy, Personal Cognition
series	eCAADe
email
last changed	2022/06/07 07:51

_id	554e
authors	Koutamanis, Alexander
year	2001
title	3 x 2 Approaches to Design Management
doi	https://doi.org/10.52842/conf.ecaade.2001.220
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 220-225
summary	Following the arguably successful introduction of building, project and real estate management to traditional architectural areas, design management is emerging as the new hot issue. One of the main arguments for it is the alleged low performance of the architect in the face of the technical complexity and operational intricacy that characterizes current design problems. In this respect, management is seen as the missing link in the architect’s methodical and operational framework. The paper suggests that this link derives more from the constraints of the domain and its subject matter rather than a management perspective. Design management refers to two main dimensions of architectural design, these of design method and of design subject. With respect to the first dimension we distinguish between three main categories: proscriptive, prescriptive and descriptive approaches. In the second dimension the distinction is between the coordination of the design process and that of the design product. The 3x2 matrix defined by these two dimensions stresses the significance of descriptive approaches for the informatization of the representation and communication of the design product. In this framework design information management emerges as an applied area of (computational) design theory that facilitates the amphidrome development of a design, i.e. not only from brief to postoccupancy but also from detail, case and precedent to design idea and solution, as well as the identification and management of critical moments, i.e. moments characterized by convergence of activities and hence extensive and intensive communication.
keywords	Method, Management, Descriptive, Informatization
series	eCAADe
email
last changed	2022/06/07 07:51

_id	72fb
authors	Koutamanis, Alexander
year	2001
title	On the Management of Visual Design Documentation
doi	https://doi.org/10.52842/conf.ecaade.2001.124
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 124-130
summary	One of the most significant consequences of computerization in design practice is a spectacular increase in the amount and complexity of information produced for the specification, analysis and communication of design decisions and products. Computerization is intended to have a positive effect on such subjects but offers no builtin guarantees. The complexity, redundancy and amount of information that is generated on a variety of media has accentuated the problems of archiving, indexing and retrieving design documentation, either in the same project or in related ones. The shortcomings of visual information processing derive from a number of inherent problems: lack of integration in information carriers and kinds; organizational uncertainty, especially with respect to archiving and retrieval; superficial replication of analogue practices; limited understanding of information utility; chronic underestimates of automation potential coupled to overestimates of costs. A progressive improvement of design documentation should focus on: (1) the integration of information kinds and carriers in a single representation (in the direction of virtual prototyping); (2) correlation of information registration and processing with information utility; (3) structural rather than opportunistic or deterministic integration of utility requirements in design representations; (4) recognition of informatization and information management as a new specialization that complements existing roles in the design and management of the built environment
keywords	Computerization, Management, Visual Representation, Integration
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2005_468
id	sigradi2005_468
authors	Koutamanis, Alexander
year	2005
title	The continuity style in architectural dynamic visualization
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 468-472
summary	The term “continuity style” in cinema refers to a collection of cinematic conventions aiming at a realistic viewing experience without drawing attention to the elements of illusion used in the representation of 3D space on 2D film. The continuity style underlies the majority of narrative films produced to date and has had a significant influence on other genres, including documentaries. Despite the similarities in purpose, architectural filmmaking owes little to the cumulative knowledge of filmmaking encapsulated in the continuity style. While narrative films focus on the viewing experience, architectural animation tends to be dominated by integral 3D building models. We propose that key elements of the continuity style could be applied to architectural dynamic visualization in order to enhance both lay perception of architectural space and professional analysis of design intentions. These elements refer to four primary areas of architectural dynamic visualization: narrative, camera use, lighting and model structure.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ijac20075401
id	ijac20075401
authors	Koutamanis, Alexander
year	2007
title	Fuzzy Modelling for Early Architectural Design
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 589-610
summary	Fuzzy modelling is simultaneously an extension of existing modelling approaches and a negation of one of their main aspects, the crispness of their definition. As a digital equivalent of analogue sketching it allows designers to register and manipulate imprecise and uncertain information. In the framework of design representations fuzzy modelling supports the development of conceptual design models characterized by flexible definition and interaction. The main advantages of such models are fluency, abstraction and continuity, at a level similar to that of analogue techniques. In addition to that they offer the possibility of local autonomy, i.e. segmentation of a representation into self-regulating and cooperating components. Three alternative forms of fuzzy modelling are proposed: (1) Canonical objects with tolerances, (2) objects described by minimal and maximal values, and (3) point sets comprising discrete, autonomous particles that describe the object by their spatial or structural relationships.
series	journal
email
last changed	2008/02/25 20:30

_id	cf2007_183
id	cf2007_183
authors	Koutamanis, Alexander
year	2007
title	Use of a Mobile Architectural Guide
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 183-195
summary	A mobile architectural guide assists architectural tourists in selecting, navigating to and recognizing architectural sights. The guide supports such tasks by means of domain knowledge, design documentation and contextual information organized into navigation modules, architectural information systems and learning modules.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	ecaade2007_039
id	ecaade2007_039
authors	Koutamanis, Alexander
year	2007
title	Matching Representation to Perception
doi	https://doi.org/10.52842/conf.ecaade.2007.551
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 551-558
summary	Visual representations play an important role in mobile architectural guides, especially with respect to the identification of buildings, i.e. matching internal representations to external ones (the documentation in the guide) and the perceived scene. By restructuring this documentation into networks of significant architectural entities and features a guide is enriched with flexible, economical means for supporting building identification under the typically variable conditions architectural travelers have to endure.
keywords	Mobile computing, architectural guide, representation, perception, recognition
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ijac20108208
id	ijac20108208
authors	Koutamanis, Alexander
year	2010
title	W.J. Mitchell - In Celebration of An Approach
source	International Journal of Architectural Computing vol. 8 - no. 2, 223-231
summary	Among the founding fathers of architectural computing, the late W.J. Mitchell was arguably the one who managed to capture the imagination of the younger generations through overviews and insights that described the backgrounds and scope of the area in a way that was suitable for novices as well as people outside the area. Calling such overviews successful popularization is only part of the truth. More importantly, they formulate a coherent and comprehensive approach that allowed Mitchell to move between eras and contexts without loosing focus or sacrificing fundamental priorities. It is an approach that remains valid and usable, a source of inspiration and understanding for future generations in the area.
series	journal
last changed	2019/05/24 09:55

_id	ijac201715202
id	ijac201715202
authors	Koutamanis, Alexander
year	2017
title	Briefing and Building Information Modelling: Potential for integration
source	International Journal of Architectural Computing vol. 15 - no. 2, 120-133
summary	The article brings together the subjects of briefing and Building Information Modelling. It considers the brief as information source for Building Information Modelling and Building Information Modelling as an environment for automating brief- related analysis and guidance. The approach is characterized by feedforward and feedback, incorporation of constraints from the brief in Building Information Modelling, connection of briefing goals to performance analysis and correlation of requirements in the brief to Building Information Modelling object properties and relations. To test the approach, 10 briefs are parsed into goals, constraints and requirements, which are then considered for integration in Building Information Modelling. As the majority of these items can become part of a model and subject to automated analyses, integration of briefing in Building Information Modelling is proposed as a viable option that can improve design and briefing performance but also signals significant changes to briefing.
keywords	Briefing, Building Information Modelling, integration, continuity, feedforward, feedback, analysis
series	other
type	normal paper
email
last changed	2019/08/02 08:29

_id	caadria2007_475
id	caadria2007_475
authors	Koutamanis, Alexander; Gilles Halin and Thomas Kvan
year	2007
title	Information Standardization from a Design Perspective
doi	https://doi.org/10.52842/conf.caadria.2007.x.j8j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	One common assumption concerning the digitization of architectural processes and products is that it should be supported by extensive standardization of design and building information. This standardization should extend beyond pre-existing conventions of the analogue period in terms of scope, integration, continuity, flexibility and adaptability. From a design perspective standardization refers to three distinct information types with different origins: geometric, categorical and project-specific information. Such information is accommodated in standards and building models either top-down or bottom-up, resulting into different possibilities and limitations.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	49fc
id	49fc
authors	KOUZELEAS Stelios, SEMIDOR Catherine
year	2001
title	THE INFLUENCE OF THE SIMPLIFIED ARCHITECTURAL MODEL ON THE ACOUSTICAL SIMULATION RESULTS
source	17th International Congress on Acoustics, Proceedings : Vol. III - Architectural acoustics - Opera house acoustics - p. 46-47 – ISBN : 88-88387-02-1, 2-7 Septembre 2001, Rome, Italy
summary	The sometimes complex architectural shape of halls creates modelling difficulties as the simulation computing systems need plane surfaces. In order to approach a perfect shape of curved surfaces, a big number of facets is necessary. This poses, as a consequence, computer memory problems which is the case of the horse shoe shaped Opera House with its richly decorated columns, balconies, etc. This paper compares the acoustical measurement results and the calculation results of a computer simulation software applied on several models (from the most simple till the most complex ones) of the Grand Theatre of Bordeaux.
keywords	Acoustics simulation, CAD modeling, room acoustics, architectural model simplification
series	other
type	normal paper
email
more	http://ims-ism.nrc-cnrc.gc.ca/ica/proceedg.html
last changed	2005/10/24 19:59

_id	2961
id	2961
authors	KOUZELEAS Stelios
year	2004
title	COMPUTATIONAL PROCESSES OF A HALL CAD MODELISATION FOR ACOUSTIC SIMULATION ACCORDING TO ACCEPTED GEOMETRY FORMAT VIA ACOUSTIC SOFTWARE
source	1st International Conference “From Scientific Computing to Computational Engineering” (IC-SCCE), 8-10 September 2004, Athens, Greece
summary	The acoustic computational simulation presents many advantages but at the same time there are some limits corresponding, among others, to the modelisation of the hall geometry. The integrated modelers of geometry of the halls in the acoustic simulation software are based especially on the programming code modelisation via text editors of coordinate points and not on the graphical modelisation, as the CAD software is. In cases of complex architectural shapes of halls, the majority of the acoustic simulation software imperatively needs to import a model from a CAD software. However, the modelisation of the geometry of the hall must take into account several criteria in order to run in an acoustic simulation software, and optimize the calculation results, such as the plane surfaces, the limited number of surfaces in some cases, the elimination of the unnecessary elements, the accepted geometry model format, etc. This paper explains the description and the particularities of three different modelisation processes of the Architectural School Amphitheater of Bordeaux in a CAD system in order to be adequate for acoustic simulation via acoustic software, such as ASCII, dxf and normals orientation model formats. It also presents computer automatization aspects of these processes integrated in a plate-form adaptable to a CAD system named “CAD-Acoustic.” These modelisation processes can also be a helpful tool during the architectural conception of the acoustic hall.
keywords	CAD modelisation process, Architectural acoustics, Acoustic simulation
series	other
type	normal paper
email
more	http://ic-scce.upatras.gr/
last changed	2005/10/25 09:47

_id	999e
id	999e
authors	KOUZELEAS Stelios
year	2004
title	APPLICATIONS OF ACOUSTIC AND GEOMETRIC SIMULATION OF HALLS WITH THE AID OF WITH THE AID OF ACOUSTIC SIMULATION PLATE-FORM ADAPTABLE IN A CAD SYSTEM. - (EFARMOGES AKOUSTIKHS KAI GEWMETRIKHS PROSOMOIOSHS AITHOUSWN ME TH BOHTHEIA PLATFORMAS AKOYSTIKHS PROSOMOIOSHS PROSARMOSMENHS SE SYSTHMA CAD)
source	Acoustics 2004, Hellenic Institute of Acoustics (HELINA), Aristotle University of Thessaloniki, 27-28 September 2004, Greece
summary	(pdf file in greek)- With the aid of the acoustic simulation plate-form named « CAD-Acoustic » which is developed in the context of PhD and adapted on the AutoCAD system, this paper presents the halls acoustic results (RT60) of Elmia (Sweden) and Opera of Bordeaux (France) in relation to acoustic measurements and results of other acoustic simulation software (Odeon, Epidaure). In parallel, it presents geometrical simulations of the modelised halls’ acoustic behavior, such as the 3D reflections of the acoustic rays from selected surface, the 3D view of the materials’ arrangements through surfaces’ coloring, the measurement of the selected absorbing / reflecting surfaces in m2 and the individual or massive absorption coefficients’ assignment to the surfaces. Finally, with the aid of « CAD-Acoustic » the acoustic results are compared in a graphic manner in relation to the ideal acoustic rates, a presentation which is a kind of an “ architectural translation of the acoustic results” taking into account several architectural elements.
keywords	CAD modeling, "CAD-Acoustic" software developement, Architectural acoustic simulation
series	other
type	normal paper
email
more	http://www.helina.gr/
last changed	2005/10/25 11:22

_id	a38d
id	a38d
authors	KOUZELEAS Stelios
year	2007
title	CONVERSION OF GPS DATA TO CARTESIAN COORDINATES VIA AN APPLICATION DEVELOPMENT ADAPTED TO A CAD MODELLING SYSTEM
source	2nd International Conference on Experiments/Process/System Modelling/Simulation & Optimization (2nd IC-EpsMsO), Athens, 4-7 July, 2007
summary	Nowadays, common methodologies in telegeoprocessing–telegeomonitoring use telecommunication means such as the GPS in order to transmit geographical coordinates to modelling and simulation systems. These 3D geodetic coordinates (φ, λ, h) can be used by modeling systems via specifics interfaces in order to proceed to real-time modelling of the remotely transmitted data. A previous published work describes a real-time remote 3D digitizing and modelling procedure via transmitted Global Positioning System (GPS) data from the field towards to a CAD system. However, these GPS data must be converted to adequate coordinate’s format (x, y, z) so that the CAD system can use them. This paper presents the computing development of a specific application adapted to a CAD modelling system permitting the conversion of the geodetic coordinates to cartesian coordinates. It presents the relation between geodetic and cartesian coordinates, the options of the final developed application and finally some schematic aspects of the computing process. The application development is realized in AutoCAD modelling system environment via special developed interface in Visual Basic (VBA) and Visual Lisp programming language. The aim of this work is to give the possibility to a CAD modelling system to “translate” and receive automatically geographical coordinates or to convert manually and selectively geodetic coordinates φ, λ, h to cartesian coordinates x, y, z.
keywords	Coordinates conversion ; CAD development ; GPS data ; CAD modelling and simulation
series	other
type	normal paper
email
more	http://www.epsmso.gr/2nd_EpsMsO_2007/Frame_page.htm
last changed	2007/10/19 17:48

_id	diss_kouzeleas
id	diss_kouzeleas
authors	Kouzeleas, S.
year	2002
title	DEVELOPMENT OF A HELP TOOL IN ARCHITECTURAL ACOUSTICS SIMULATION ADAPTABLE IN A MODELISATION CAD SYSTEM
source	Ph.D. Thesis, Order number 2642, University of Bordeaux 1, 2002, France
summary	The aim of the proposed research in this thesis is the rapprochement of the acoustical conception and simulation with the architectural conception in order to give the architect the means to appreciate and evaluate the acoustical results, facilitate his collaboration with the acoustician, and, finally, allow him to have a help base during his architectural conception for acoustical simulation. This is proposed by the realisation of a plate-form of help adaptable to an architectural modelisation C.A.D. program, integrating acoustical calculate motors, graphical modules and research developed. This research concerns the definition of different processes of modelisation and simplification of architectural models for acoustical simulation, the translation of the acoustical results in an architectural way, the integration of an architectural approach to the acoustical conception, and an acoustical integrated multimedia database.
keywords	architectural acoustics, acoustics simulation, acoustics conception, architectural
series	thesis:PhD
type	normal paper
email
last changed	2005/10/17 21:57

_id	2006_128
id	2006_128
authors	Kouzeleas, Stelios Th. and Kimon D. Papadimitriou
year	2006
title	Real-time remote 3D digitizing and modelling
doi	https://doi.org/10.52842/conf.ecaade.2006.128
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 128-131
summary	This paper describes a procedure that feeds remotely a modelling system with geographical coordinates and the relative measurements taken in place in order to model dynamically new entities in real-time. The operation of this system is based on methodologies that are commonly used in telegeoprocessing – telegeomonitoring systems and its purpose is to simulate in real-time an existing environment using the captured measurements. The direct input of geographic data to the proposed system, which is adapted to a modelling environment (CAD or GIS), triggers the creation of new 3D entities in real-time (points, linear or area features), as it could be done with a traditional tablet digitizer. Simultaneously, the proposed system represents thematically the properties of the modelling entities (according to the measured values) over a 3D mesh. The aim of the suggested system is the remote registration of additional spatial information, their adequate treatment and adjustment via special developed interfaces, including their representation via developed software which is applied in the AutoCAD environment because of its programming development support and its use by a variety of engineers.
keywords	Real-time modelling; Digitizing; Cartographic simulation; GIS
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2016_242
id	ecaade2016_242
authors	Kovács, Ádám Tamás and Szoboszlai, Mihály
year	2016
title	Experience in CAAD Education Using a MOOC System
doi	https://doi.org/10.52842/conf.ecaade.2016.1.269
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 269-274
summary	This paper describes some of the challenges of using a Massive Open Online Course (MOOC) framework system with a variety of digital content. Situated in the 'efficiency' paradigm of digital design methods and Computer Aided Architectural Design (CAAD) education, we allow participants to set their own schedules, meet demands that are appropriate for their abilities, and determine their own path. The content within this framework motivates students through life-like tasks and examples. This paper shares our experiences in CAAD education through a course curriculum developed by applying a variety of digital content. We have focused on resolving the problem of inefficient teaching of CAAD systems by developing a blended learning curriculum.
wos	WOS:000402063700030
keywords	CAAD; education; b-learning; MOOC; curriculum analytics; mind-map
series	eCAADe
email
last changed	2022/06/07 07:51

_id	7cc1
authors	Kowal, Slawomir
year	1995
title	CAD Users Integration – A Current Problem
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 93-103
summary	In just about every field of human activities, actions which cover the design processes and the development of "a product", demand the participation of people presenting different professions and specialization. Designers using CAD techniques, usually apply different programs and even computer systems. This means that quite a large number of different applications, realising various elementary tasks, may be used during architectural design process. Very seldom data generated by a single designer, may be used by another one presenting a different specialization and using a different program. As each one of them makes a lot of changes during the design process, the need for a free exchange of the computer generated data may be seen easily. Hitherto proposed solutions of the integration of CAD systems users may be qualified in two following groups: 1.) Those based on a single integrated CAD system; 2.) Those based on a neutral data transfer format.
series	plCAD
last changed	2000/01/24 10:08

_id	ecaade2015_140
id	ecaade2015_140
authors	Kowal, Slawomir; Koszewski, Krzysztof, Slyk, Jan and Wrona, Stefan
year	2015
title	Parametric Methods in Reconstruction of the Medieval Proto-Town in Pultusk, Poland
doi	https://doi.org/10.52842/conf.ecaade.2015.1.695
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 695-700
summary	This paper describes methods, processes and the outcome of the reconstruction in the medieval wooden settlement complex in Pultusk, Poland. It is the result of the interdisciplinary cooperation between architects from Warsaw University of Technology and archaeologists from Regional Museum of Pultusk. They have undertaken the research issues of information exchange and knowledge-building processes in the digital environment. Main issues were related to the methods of computer reconstruction in architectural and urban scale, which enable alternative narrative threads. To achieve this, parametric techniques were adopted and the 'Pultusk Recontructor' application was developed in Grasshopper. The interaction between architects and archaeologists over hypotheses and alternatives was supported in urban scale by 'Rapid Reconstruction Modular Model'. This 3D printed urban model, consist of segments which can be simultaneously exchanged. It became not only a substrate for scientific debate, but also may serve an education role for the permanent Museum exhibition.
wos	WOS:000372317300075
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=21013e32-702a-11e5-99b6-d34246563b4e
last changed	2022/06/07 07:51

For more results click below: