Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 6942

Reformat results as: short short into frame detailed detailed into frame

_id	39a6
authors	Ellis, C.A., Gibbs, S.J. and Gail, L.
year	1991
title	Groupware: some issues and experiences
source	Communication of the ACM 34(l), pp. 38-58
summary	Groupware reflects a change in emphasis from using the computer to solve problems to using the computer to facilitate human interaction. This article describes categories and examples of group- ware and discusses some underlying research and development issues. GROVE, a novel group editor, is explained in some detail as a salient groupware example.
series	journal paper
last changed	2003/04/23 15:50

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	b04c
authors	Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year	1996
title	Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source	Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary	It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series	other
last changed	2003/04/23 15:50

_id	a395
authors	Mitchell, W.J., Liggett, R.S., Pollalis, S.N. and Tan, M.
year	1991
title	Integrating Shape Grammars and Design Analysis
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 17-32
summary	This paper demonstrates how design problems can be solved by combining a shape grammar to generate alternatives with standard engineering analysis procedures to test them. It provides a detailed worked example, and discusses practical applications of the idea in design teaching.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	7508
authors	Montgomery, D.C.
year	1991
title	Design and Analysis of Experiments
source	John Wiley, Chichester
summary	Learn How to Achieve Optimal Industrial Experimentation Through four editions, Douglas Montgomery has provided statisticians, engineers, scientists, and managers with the most effective approach for learning how to design, conduct, and analyze experiments that optimize performance in products and processes. Now, in this fully revised and enhanced Fifth Edition, Montgomery has improved his best-selling text by focusing even more sharply on factorial and fractional factorial design and presenting new analysis techniques (including the generalized linear model). There is also expanded coverage of experiments with random factors, response surface methods, experiments with mixtures, and methods for process robustness studies. The book also illustrates two of today's most powerful software tools for experimental design: Design-Expert(r) and Minitab(r). Throughout the text, You'll find output from these two programs, along with detailed discussion on how computers are currently used in the analysis and design of experiments. You'll also learn how to use statistically designed experiments to: * Obtain information for characterization and optimization of systems * Improve manufacturing processes * Design and develop new processes and products * Evaluate material alternatives in product design * Improve the field performance, reliability, and manufacturing aspects of products * Learn how to conduct experiments effectively and efficiently Other important textbook features: * Student version of Design-Expert(r) software is available. * Web site (www.wiley.com/college/montgomery) offers supplemental text material for each chapter, a sample syllabus, and sample student projects from the author's Design of Experiments course at Arizona State University.
series	other
last changed	2003/04/23 15:14

_id	ga0010
id	ga0010
authors	Moroni, A., Zuben, F. Von and Manzolli, J.
year	2000
title	ArTbitrariness in Music
source	International Conference on Generative Art
summary	Evolution is now considered not only powerful enough to bring about the biological entities as complex as humans and conciousness, but also useful in simulation to create algorithms and structures of higher levels of complexity than could easily be built by design. In the context of artistic domains, the process of human-machine interaction is analyzed as a good framework to explore creativity and to produce results that could not be obtained without this interaction. When evolutionary computation and other computational intelligence methodologies are involved, every attempt to improve aesthetic judgement we denote as ArTbitrariness, and is interpreted as an interactive iterative optimization process. ArTbitrariness is also suggested as an effective way to produce art through an efficient manipulation of information and a proper use of computational creativity to increase the complexity of the results without neglecting the aesthetic aspects [Moroni et al., 2000]. Our emphasis will be in an approach to interactive music composition. The problem of computer generation of musical material has received extensive attention and a subclass of the field of algorithmic composition includes those applications which use the computer as something in between an instrument, in which a user "plays" through the application's interface, and a compositional aid, which a user experiments with in order to generate stimulating and varying musical material. This approach was adopted in Vox Populi, a hybrid made up of an instrument and a compositional environment. Differently from other systems found in genetic algorithms or evolutionary computation, in which people have to listen to and judge the musical items, Vox Populi uses the computer and the mouse as real-time music controllers, acting as a new interactive computer-based musical instrument. The interface is designed to be flexible for the user to modify the music being generated. It explores evolutionary computation in the context of algorithmic composition and provides a graphical interface that allows to modify the tonal center and the voice range, changing the evolution of the music by using the mouse[Moroni et al., 1999]. A piece of music consists of several sets of musical material manipulated and exposed to the listener, for example pitches, harmonies, rhythms, timbres, etc. They are composed of a finite number of elements and basically, the aim of a composer is to organize those elements in an esthetic way. Modeling a piece as a dynamic system implies a view in which the composer draws trajectories or orbits using the elements of each set [Manzolli, 1991]. Nonlinear iterative mappings are associated with interface controls. In the next page two examples of nonlinear iterative mappings with their resulting musical pieces are shown.The mappings may give rise to attractors, defined as geometric figures that represent the set of stationary states of a non-linear dynamic system, or simply trajectories to which the system is attracted. The relevance of this approach goes beyond music applications per se. Computer music systems that are built on the basis of a solid theory can be coherently embedded into multimedia environments. The richness and specialty of the music domain are likely to initiate new thinking and ideas, which will have an impact on areas such as knowledge representation and planning, and on the design of visual formalisms and human-computer interfaces in general. Above and bellow, Vox Populi interface is depicted, showing two nonlinear iterative mappings with their resulting musical pieces. References [Manzolli, 1991] J. Manzolli. Harmonic Strange Attractors, CEM BULLETIN, Vol. 2, No. 2, 4 -- 7, 1991. [Moroni et al., 1999] Moroni, J. Manzolli, F. Von Zuben, R. Gudwin. Evolutionary Computation applied to Algorithmic Composition, Proceedings of CEC99 - IEEE International Conference on Evolutionary Computation, Washington D. C., p. 807 -- 811,1999. [Moroni et al., 2000] Moroni, A., Von Zuben, F. and Manzolli, J. ArTbitration, Las Vegas, USA: Proceedings of the 2000 Genetic and Evolutionary Computation Conference Workshop Program – GECCO, 143 -- 145, 2000.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ascaad2007_008
id	ascaad2007_008
authors	Rafi A. and R. Mat Rani
year	2007
title	Visual impact assessment (VIA): A review on theoretical frameworks for urban streetscape
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 87-94
summary	This paper reviews several theoretical frameworks of visual analysis used in computer-based Visual Impact Assessment (VIA) for design decisions in architecture, urban landscape and urban planning. The discussion will focus on the underlying issues of preferences and predictions between designer and lay-public, methodologies of visual analysis, and computing media technologies due to fact that these components primarily contribute towards the result of VIA. Two different sets of visual analysis (i.e. designer’s and layman’s points of view) are presented based on Sanoff’s (1991) arguments that lay-public preferences are always become a second opinion compared to the judgments by designers. These theories will then be developed and used in the VIA experiments to understand the impact of the visuals in different media for viewers’ understanding. This paper concludes with a discussion and suggestion of analysis framework to be used for the visual experiments.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	a233
authors	Rosenman, M.A., Gero, J.S. and Oxman, R.E.
year	1991
title	What's in a Case: The Use of Case Bases, Knowledge Bases, and Databases in Design
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 285-300
summary	Design experience can be classified into generalized or compiled knowledge and specific knowledge. Generalized design knowledge has been introduced into computer-aided design in the form of rules, frames and more recently, design prototypes. Case-based reasoning is a well-defined paradigm in artificial intelligence and has obvious scope for its use in design reasoning. This paper explores case-based reasoning in design and argues for the integration of both specific and generalized design knowledge. This integration allows for characterizing what is in a case by drawing upon the schema developed for design prototypes. Finally, the paper argues that the addition of precedent knowledge, in the form of case bases, to knowledge bases and CAD databases will further extend the experience-based capabilities of design systems.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ascaad2007_026
id	ascaad2007_026
authors	Sarji, E.A.; A. Rafi and R. Mat Rani
year	2007
title	Preparing a multimedia-based gallery for institute of higher learning: A case study of Malaysian experience
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 305-316
summary	While the majority of medium and small sized institutions still rely on their physical or traditional content, it has been observed a pre-disposition usually by major, recently founded or contemporary art institutions to display net-based projects (Buiani, 2001) and to some extent established as a permanent display. This changing of exhibitions has penetrated in many Asian galleries and as a result many schools trying to re-position and present in such a way that it can be easily changed and adapted to host multimedia, Internet, interactive and computer-based content. This funded research project investigates the functions of gallery in IHL in Malaysia. A triangulated study was conducted to understand the potentials and issues faced by galleries in public and private universities focusing on design schools that include art and design, and architecture. This research starts with the understanding of gallery design theories. It is then followed by a qualitative method survey to all galleries in the IHL. This research continues with an in depth study and a survey on Electronic Gallery (e-Gallery), Faculty of Creative Multimedia (FCM), Multimedia University (MMU) to understand between the theories and design ideas. A set of questionnaires was developed based on Mathews (1991) and Stewart’s (2002) principles and guidelines on research methods and distributed to visitors throughout a period of time consisting of open-ended, close-ended, Likert Summated Rating Scale and Multiple-choice. This involved a controlled group of visitors comprises students and staff of the faculty. The results of these studies will be used as a reference to further conduct a wider scope of galleries worldwide towards designing a multimedia-based gallery framework for Institute of Higher Learning.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	80ce
authors	Turner, R., Balaguer, F., Gobbetti, E. and Thalmann, D.
year	1991
title	Interactive Scene Walkthrough Using a Physically-Based Virtual Camera
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 511-520
summary	One of the most powerful results of recent advances in graphics hardware is the ability of a computer user to interactively explore a virtual building or landscape. The newest threedimensional input devices, together with high speed 3D graphics workstations, make it possible to view and move through a 3D scene by interactively controlling the motion of a virtual camera. In this paper, we describe how natural and intuitive control of building walkthrough can be achieved by using a physically-based model of the virtual camera's behavior. Using the laws of classical mechanics to create an abstract physical model of the camera, we then simulate the virtual camera motion in real time in response toforce data from the various 3D input devices (e.g. the Spaceball and Polhemus 3Space Digitizer). The resulting interactive behavior of the model is determined by several physical parameters such as mass, moment of inertia, and various friction coefficients which can all be varied interactively, and by constraints on the camera's degrees of freedom. This allows us to explore a continuous range of physically-based metaphors for controlling the camera motion. We present the results of experiments using several of these metaphors for virtual camera motion and describe the effects of the various physical parameters.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	241f
authors	Van Wyk, C.S.G., Bhat, R., Gauchel, J. and Hartkopf, V.
year	1991
title	A Knowledge-based Approach to Building Design and Performance Evaluation
doi	https://doi.org/10.52842/conf.acadia.1991.001
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 1-14
summary	The introduction of physically-based description and simulation methods to issues of building performance (i.e., acoustic, visual, and air quality; thermal comfort, cost, and long-term system integrity) began in the early 1960s as one of the first examples of computer-aided design in architecture. Since that time, the development of commercially-available computer-aided design systems has largely been oriented towards the visualization and representation of the geometry of buildings, while the development of building performance applications has been concerned with approaches to mathematical and physics-based modeling for predictive purposes.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	a620
authors	Asanowicz, Alexander
year	1991
title	Unde et Quo
doi	https://doi.org/10.52842/conf.ecaade.1991.x.t1s
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	To begin with, I would like to say a few words about the problem of alienation of modern technologies which we also inevitably faced while starting teaching CAD at our department. Quite often nowadays a technology becomes a fetish as a result of lack of clear goals in human mind. There are multiple technologies without sense of purpose which turned into pure experiments. There is always the danger of losing purposeness and drifting toward alienation. The cause of the danger lies in forgetting about original goals while mastering and developing the technology. Eventually the original idea is ignored and a great gap appears between technical factors and creativity. We had the danger of alienation in mind when preparing the CAAD curriculum. Trying to avoid the tension between technical and creative elements we agreed not to introduce CAD too soon then the fourth year of studies and continue it for two semesters. One thing was clear - we should not teach the technique of CAD but how to design using a computer as a medium. Then we specified projects. The first was called "The bathroom I dream of" and meant to be a 2D drawing. The four introductory meetings were in fact teaching foundations of DOS, then a specific design followed with the help of AutoCAD program. In the IX semester, for example, it was "A family house" (plans, facades, perspective). "I have to follow them - I am their leader" said L.J. Peter in "The Peter's Prescription". This quotation reflects exactly the situation we find ourselves in teaching CAAD at our department. It means that ever growing students interest in CAAD made us introduce changes in the curriculum. According to the popular saying, "The more one gets the more one wants", so did we and the students feel after the first semester of teaching CAD. From autumn 1991 CAAD classes will be carried from the third year of studying for two consecutive years. But before further planning one major steep had to be done - we decided to reverse the typical of the seventies approach to the problem when teaching programming languages preceded practical goals hence discouraging many learners.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	9964
authors	Augenbroe, G. and Winkelmann, F.
year	1991
title	Integration of Simulation into the Building Design Process
source	J.A. Clarke, J.W. Mitchell, and R.C. Van de Perre (eds.), Proceedings, Building Simulation '91 IBPSA Conference, pp. 367-374
summary	We describe the need for a joint effort between design researchers and simulation tool developers in formulating procedures and standards for integrating simulation into the building design process. We review and discuss current efforts in the US and Europe in the development of next-generation simulation tools and design integration techniques. In particular, we describe initiatives in object-oriented simulation environments (including the US Energy 'Kernel System, the Swedish Ida system, the UK Energy Kernel System, and the French ZOOM program.) and consider the relationship of these environments to recent R&D initiatives in design integration (the COMBINE project in Europe and the AEDOT project in the US).
series	other
last changed	2003/11/21 15:16

_id	ca50
authors	Ayrle, Hartmut
year	1991
title	XNET2 - Methodical Design of Local Area Networks in Buildings - An Application of the A4 Intelligent Design Tool
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 443-450
summary	XNET2 is a prototype program, that helps network planners to design Ethernet-conform data-networks for sites and buildings. It is implemented as an example application of the ARMILLA4 Intelligent Design Tool under Knowledge Craft. It is based on a knowledge acquisition phase with experts from DECsite, the network-branch of DEC. The ARMILLA Design Tool is developed on the basis of Fritz Haller's ARMILLA ' a set of geometrical and operational rules for the integration of technical ductwork into a building's construction.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	22d6
authors	Ballheim, F. and Leppert, J.
year	1991
title	Architecture with Machines, Principles and Examples of CAAD-Education at the Technische Universität München
doi	https://doi.org/10.52842/conf.ecaade.1991.x.h3w
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	"Design tools affect the results of the design process" - this is the starting point of our considerations about the efficient use of CAAD within architecture. To give you a short overview about what we want to say with this thesis lets have a short - an surely incomplete - trip through the fourth dimension back into the early time of civil engineering. As CAD in our faculty is integrated in the "Lehrstuhl für Hochbaustatik und Tragwerksplanung" (if we try to say it in English it would approximately be "institute of structural design"), we chose an example we are very familiar with because of its mathematical background - the cone sections: Circle, ellipse, parabola and hyperbola. If we start our trip two thousand years ago we only find the circle - or in very few cases the ellipse - in their use for the ground plan of greek or roman theaters - if you think of Greek amphitheaters or the Colosseum in Rome - or for the design of the cross section of a building - for example the Pantheon, roman aqueducts or bridges. With the rediscovery of the perspective during the Renaissance the handling of the ellipse was brought to perfection. May be the most famous example is the Capitol in Rome designed by Michelangelo Buonarotti with its elliptical ground plan that looks like a circle if the visitor comes up the famous stairway. During the following centuries - caused by the further development of the natural sciences and the use of new construction materials, i.e. cast-iron, steel or concrete - new design ideas could be realized. With the growing influence of mathematics on the design of buildings we got the division into two professions: Civil engineering and architecture. To the regret of the architects the most innovative constructions were designed by civil engineers, e.g. the early iron bridges in Britain or the famous bridges of Robert Maillard. Nowadays we are in the situation that we try to reintegrate the divided professions. We will return to that point later discussing possible solutions of this problem. But let us continue our 'historical survey demonstrating the state of the art we have today. As the logical consequence of the parabolic and hyperbolic arcs the hyperbolic parabolic shells were developed using traditional design techniques like models and orthogonal sections. Now we reach the point where the question comes up whether complex structures can be completely described by using traditional methods. A question that can be answered by "no" if we take the final step to the completely irregular geometry of cable- net-constructions or deconstructivistic designs. What we see - and what seems to support our thesis of the connection between design tools and the results of the design process - is, that on the one hand new tools enabled the designer to realize new ideas and on the other hand new ideas affected the development of new tools to realize them.
series	eCAADe
more	http://www.mediatecture.at/ecaade/91/ballheim_leppert.pdf
last changed	2022/06/07 07:50

_id	b6b3
authors	Brown, J.S. and Duguid, P.
year	1991
title	Organizational Learning and Communities-of-Practice: Toward a Unified View of Working, Learning, and Innovation
source	Organization Science, 2(1), 40-57
summary	Recent ethnographic studies of workplace practices indicate that the ways people actually work usually differ fundamentally from the ways organizations describe that work in manuals, training programs, organizational charts, and job descriptions. Organizations tend to rely on the latter in their attempts to understand and improve work practice. We relate the conclusions of one study of work practices to compatible investigations of learning and innovation to argue that conventional descriptions of jobs mask not only the ways people work, but also the learning and innovation generated in the informal communities-of-practice in which they work. By reassessing the apparently conflicting triad of work, learning, and innovation in the context of actual communities and actual practices, we suggest that the synergistic connections between these three become apparent. With a unified view of working, learning, and innovating, it should be possible to reconceive of and redesign organizations to improve all three.
series	journal paper
last changed	2003/04/23 15:14

_id	ascaad2014_002
id	ascaad2014_002
authors	Burry, Mark
year	2014
title	BIM and the Building Site: Assimilating digital fabrication within craft traditions
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 27-36
summary	This paper outlines a particular component of very well known project: Antoni Gaudí’s Sagrada Família Basilica in Barcelona (1882– on-going but scheduled for completion in 2026). At the time of writing the realisation of the project has proceeded for 87 years since Gaudí's death (1852-1926). As a building site it has been a living laboratory for the nexus between traditional construction offsite manufacturing and digital fabrication since the computers were first introduced to the project:CAD in 1989 closely followed by CAAD two years later. More remarkably CAD/CAM commenced its significant influence in 1991 with the take-up of sem robotised stone cutting and carving. The subject of this paper is an elevated auditorium space that is one of the relatively few ‘sketchy’ areas that Gaudí bequeathed the successors for the design of his magnum opus.
series	ASCAAD
email
last changed	2016/02/15 13:09

For more results click below: