Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1201

Reformat results as: short short into frame detailed detailed into frame

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
doi	https://doi.org/10.52842/conf.caadria.2002.213
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	eabb
authors	Boeykens, St. Geebelen, B. and Neuckermans, H.
year	2002
title	Design phase transitions in object-oriented modeling of architecture
doi	https://doi.org/10.52842/conf.ecaade.2002.310
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 310-313
summary	The project IDEA+ aims to develop an “Integrated Design Environment for Architecture”. Its goal is providing a tool for the designer-architect that can be of assistance in the early-design phases. It should provide the possibility to perform tests (like heat or cost calculations) and simple simulations in the different (early) design phases, without the need for a fully detailed design or remodeling in a different application. The test for daylighting is already in development (Geebelen, to be published). The conceptual foundation for this design environment has been laid out in a scheme in which different design phases and scales are defined, together with appropriate tests at the different levels (Neuckermans, 1992). It is a translation of the “designerly” way of thinking of the architect (Cross, 1982). This conceptual model has been translated into a “Core Object Model” (Hendricx, 2000), which defines a structured object model to describe the necessary building model. These developments form the theoretical basis for the implementation of IDEA+ (both the data structure & prototype software), which is currently in progress. The research project addresses some issues, which are at the forefront of the architect’s interest while designing with CAAD. These are treated from the point of view of a practicing architect.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cef3
authors	Bridges, Alan H.
year	1992
title	Computing and Problem Based Learning at Delft University of Technology Faculty of Architecture
doi	https://doi.org/10.52842/conf.ecaade.1992.289
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 289-294
summary	Delft University of Technology, founded in 1842, is the oldest and largest technical university in the Netherlands. It provides education for more than 13,000 students in fifteen main subject areas. The Faculty of Architecture, Housing, Urban Design and Planning is one of the largest faculties of the DUT with some 2000 students and over 500 staff members. The course of study takes four academic years: a first year (Propaedeuse) and a further three years (Doctoraal) leading to the "ingenieur" qualification. The basic course material is delivered in the first two years and is taken by all students. The third and fourth years consist of a smaller number of compulsory subjects in each of the department's specialist areas together with a wide range of option choices. The five main subject areas the students may choose from for their specialisation are Architecture, Building and Project Management, Building Technology, Urban Design and Planning, and Housing. The curriculum of the Faculty has been radically revised over the last two years and is now based on the concept of "Problem-Based Learning". The subject matter taught is divided thematically into specific issues that are taught in six week blocks. The vehicles for these blocks are specially selected and adapted case studies prepared by teams of staff members. These provide a focus for integrating specialist subjects around a studio based design theme. In the case of second year this studio is largely computer-based: many drawings are produced by computer and several specially written computer applications are used in association with the specialist inputs. This paper describes the "block structure" used in second year, giving examples of the special computer programs used, but also raises a number of broader educational issues. Introduction of the block system arose as a method of curriculum integration in response to difficulties emerging from the independent functioning of strong discipline areas in the traditional work groups. The need for a greater level of selfdirected learning was recognised as opposed to the "passive information model" of student learning in which the students are seen as empty vessels to be filled with knowledge - which they are then usually unable to apply in design related contexts in the studio. Furthermore, the value of electives had been questioned: whilst enabling some diversity of choice, they may also be seen as diverting attention and resources from the real problems of teaching architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	9f8a
authors	Davidow, William H.
year	1992
title	The Virtual Corporation: Structuring and Revitalizing the Corporation for the 21St Century
source	New York: Harper Collins Publishers
summary	The great value of this timely, important book is that it provides an integrated picture of the customer-driven company of the future. We have begun to learn about lean production technology, stripped-down management, worker empowerment, flexible customized manufacturing, and other modern strategies, but Davidow and Malone show for the first time how these ideas are fitting together to create a new kind of corporation and a worldwide business revolution. Their research is fascinating. The authors provide illuminating case studies of American, Japanese, and European companies that have discovered the keys to improved competitiveness, redesigned their businesses and their business relationships, and made extraordinary gains. They also write bluntly and critically about a number of American corporations that are losing market share by clinging to outmoded thinking. Business success in the global marketplace of the future is going to depend upon corporations producing "virtual" products high in added value, rich in variety, and available instantly in response to customer needs. At the heart of this revolution will be fast new information technologies; increased emphasis on quality; accelerated product development; changing management practices, including new alignments between management and labor; and new linkages between company, supplier, and consumer, and between industry and government. The Virtual Corporation is an important cutting-edge book that offers a creative synthesis of the most influential ideas in modern business theory. It has already fired excitement and debate in industry, academia, and government, and it is essential reading for anyone involved in the leadership of America's business and the shaping of America's economic future.
series	other
last changed	2003/04/23 15:14

_id	2b7a
authors	Ferguson, H., Rockwood, A. and Cox, J.
year	1992
title	Topological Design of Sculptured Surfaces
source	Computer Graphics, no. 26, pp.149-156
summary	Topology is primal geometry. Our design philosophy embodies this principle. We report on a new surface &sign perspective based on a "marked" polygon for each object. The marked polygon captures the topology of the object surface. We construct multiply periodic mappings from polygon to sculptured surface. The mappings arise naturally from the topology and other design considerations. Hence we give a single domain global parameteriration for surfaces with handles. Examples demonstrate the design of sculptured objects and their ntanufimture.
series	journal paper
last changed	2003/04/23 15:50

_id	ecaade03_473_175_flanagan_neu
id	ecaade03_473_175_flanagan_neu
authors	Flanagan, Robert H.
year	2003
title	Generative Logic in Digital Design
doi	https://doi.org/10.52842/conf.ecaade.2003.473
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 473-484
summary	This exploration of early-stage, architectural design pedagogy is in essence, a record of an ongoing transformation underway in architecture, from its practice in the art of geometry of space to its practice in the art of geometry of space-time. A selected series of student experiments, from 1992 to the present, illustrate a progression in architectural theory, from Pythagorean concepts of mathematics and geometry, to the symbolic representation of space and non-linear time in film. The dimensional expansion of space, from xyz to xyz+t (time), represents a tactical and strategic opportunity to incorporate multisensory design variables in architectural practice, as well as in its pedagogy.
keywords	Generative; process; derivative; logic; systemic
series	eCAADe
email
last changed	2022/06/07 07:51

_id	56de
authors	Handa, M., Hasegawa, Y., Matsuda, H., Tamaki, K., Kojima, S., Matsueda, K., Takakuwa, T. and Onoda, T.
year	1996
title	Development of interior finishing unit assembly system with robot: WASCOR IV research project report
source	Automation in Construction 5 (1) (1996) pp. 31-38
summary	The WASCOR (WASeda Construction Robot) research project was organized in 1982 by Waseda University, Tokyo, Japan, aiming at automatizing building construction with a robot. This project is collaborated by nine general contractors and a construction machinery manufacturer. The WASCOR research project has been divided into four phases with the development of the study and called WASCOR I, II, III, and IV respectively. WASCOR I, II, and III finished during the time from 1982 to 1992 in a row with having 3-4 years for each phase, and WASCOR IV has been continued since 1993. WASCOR IV has been working on a automatized building interior finishing system. This system consists of following three parts. (1) Development of building system and construction method for automated interior finishing system. (2) Design of hardware system applied to automated interior finishing system. (3) Design of information management system in automated construction. As the research project has been developing, this paper describes the interim report of (1) Development of building system and construction method for automated interior finishing system, and (2) Design of hardware system applied to automated interior finishing system.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	578d
authors	Helpenstein, H. (Ed.)
year	1993
title	CAD geometry data exchange using STEP
source	Berlin: Springer-Verlag
summary	With increasing demand for data exchange in computer integrated manufacturing, a neutral connection between dissimilar systems is needed. After a few national and European attempts, a worldwide standardization of product data has been developed. Standard ISO 10303 (STEP - STandard for Exchange of Product data) produced in its first version those parts that are relevant for CAD geometrical data. A European consortium of 14 CAD vendors and users was supported by the ESPRIT programme to influence the emerging standard and implement early applications for it. Over the years 1989-1992, project CADEX (CAD geometry data EXchange) worked out application protocols as a contribution to STEP; developed a software toolkit that reads, writes, and manipulates STEP data; and, based on this toolkit, implemented data exchange processors for ten different CAD and FEA systems. This book reports the work done in project CADEX and describes all its results in detail.
series	other
last changed	2003/04/23 15:14

_id	32eb
authors	Henry, Daniel
year	1992
title	Spatial Perception in Virtual Environments : Evaluating an Architectural Application
source	University of Washington
summary	Over the last several years, professionals from many different fields have come to the Human Interface Technology Laboratory (H.I.T.L) to discover and learn about virtual environments. In general, they are impressed by their experiences and express the tremendous potential the tool has in their respective fields. But the potentials are always projected far in the future, and the tool remains just a concept. This is justifiable because the quality of the visual experience is so much less than what people are used to seeing; high definition television, breathtaking special cinematographic effects and photorealistic computer renderings. Instead, the models in virtual environments are very simple looking; they are made of small spaces, filled with simple or abstract looking objects of little color distinctions as seen through displays of noticeably low resolution and at an update rate which leaves much to be desired. Clearly, for most applications, the requirements of precision have not been met yet with virtual interfaces as they exist today. However, there are a few domains where the relatively low level of the technology could be perfectly appropriate. In general, these are applications which require that the information be presented in symbolic or representational form. Having studied architecture, I knew that there are moments during the early part of the design process when conceptual decisions are made which require precisely the simple and representative nature available in existing virtual environments. This was a marvelous discovery for me because I had found a viable use for virtual environments which could be immediately beneficial to architecture, my shared area of interest. It would be further beneficial to architecture in that the virtual interface equipment I would be evaluating at the H.I.T.L. happens to be relatively less expensive and more practical than other configurations such as the "Walkthrough" at the University of North Carolina. The set-up at the H.I.T.L. could be easily introduced into architectural firms because it takes up very little physical room (150 square feet) and it does not require expensive and space taking hardware devices (such as the treadmill device for simulating walking). Now that the potential for using virtual environments in this architectural application is clear, it becomes important to verify that this tool succeeds in accurately representing space as intended. The purpose of this study is to verify that the perception of spaces is the same, in both simulated and real environment. It is hoped that the findings of this study will guide and accelerate the process by which the technology makes its way into the field of architecture.
keywords	Space Perception; Space (Architecture); Computer Simulation
series	thesis:MSc
last changed	2003/02/12 22:37

_id	e7c8
authors	Kalisperis, Loukas N., Steinman, Mitch and Summers, Luis H.
year	1992
title	Design Knowledge, Environmental Complexity in Nonorthogonal Space
source	New York: John Wiley & Sons, 1992. pp. 273-291 : ill. includes bibliography
summary	Mechanization and industrialization of society has resulted in most people spending the greater part of their lives in enclosed environments. Optimal design of indoor artificial climates is therefore of increasing importance. Wherever artificial climates are created for human occupation, the aim is that the environment be designed so that individuals are in thermal comfort. Current design methodologies for radiant panel heating systems do not adequately account for the complexities of human thermal comfort, because they monitor air temperature alone and do not account for thermal neutrality in complex enclosures. Thermal comfort for a person is defined as that condition of mind which expresses satisfaction with the thermal environment. Thermal comfort is dependent on Mean Radiant Temperature and Operative Temperature among other factors. In designing artificial climates for human occupancy the interaction of the human with the heated surfaces as well the surface-to-surface heat exchange must be accounted for. Early work in the area provided an elaborate and difficult method for calculating radiant heat exchange for simplistic and orthogonal enclosures. A new improved method developed by the authors for designing radiant panel heating systems based on human thermal comfort and mean radiant temperature is presented. Through automation and elaboration this method overcomes the limitations of the early work. The design procedure accounts for human thermal comfort in nonorthogonal as well as orthogonal spaces based on mean radiant temperature prediction. The limitation of simplistic orthogonal geometries has been overcome with the introduction of the MRT-Correction method and inclined surface-to-person shape factor methodology. The new design method increases the accuracy of calculation and prediction of human thermal comfort and will allow designers to simulate complex enclosures utilizing the latest design knowledge of radiant heat exchange to increase human thermal comfort
keywords	applications, architecture, building, energy, systems, design, knowledge
series	CADline
last changed	2003/06/02 10:24

_id	8540
authors	Peitgen, H.-O., Jurgens, H. and Saupe, D.
year	1992
title	Fractals for the Classroom :Part 2: Complex Systems and Mandelbrot Set.
source	Springer-Verlag, New York
summary	This second volume of strategic classroom activities is designed to develop, through a hands-on approach, a deeper mathematical understanding and greater appreciation of fractals and chaos. The concepts presented include iteration, chaos, and the Mandelbrot set.
series	other
last changed	2003/04/23 15:14

_id	054b
authors	Peitgen, H.-O., Jürgens, H. and Saupe, D.
year	1992
title	Fractals for the Classroom. Part 1: Introduction to Fractals and Chaos
source	Springer Verlag, New York
summary	Fractals for the Classroom breaks new ground as it brings an exciting branch of mathematics into the classroom. The book is a collection of independent chapters on the major concepts related to the science and mathematics of fractals. Written at the mathematical level of an advanced secondary student, Fractals for the Classroom includes many fascinating insights for the classroom teacher and integrates illustrations from a wide variety of applications with an enjoyable text to help bring the concepts alive and make them understandable to the average reader. This book will have a tremendous impact upon teachers, students, and the mathematics education of the general public. With the forthcoming companion materials, including four books on strategic classroom activities and lessons with interactive computer software, this package will be unparalleled.
series	other
last changed	2003/04/23 15:14

_id	8824
authors	Perkins, N. H.
year	1992
title	Three questions on the use of photo-realistic simulations as real world surrogates
source	Landscape and Urban Planning 21, pp. 265-267
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:41

_id	ddss9212
id	ddss9212
authors	Prins, M., Bax, M.F.TH., Carp, J.C. and Tempelmans Plat, H.
year	1993
title	A design decision support system for building flexibility and costs
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Because of possible changes in demand, buildings must have some flexibility. In this paper a building model, a financial-economic model and a process model will be presented, which together constitute a design decision support system. This system may be used to decide on flexibility and costs of building variants in all phases of the design process.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9204
id	ddss9204
authors	Pullen, W.R., Wassenaar, C.L.G., van Heti'ema, I., Dekkers, J.T., Janszen, I., Boender, C.G.E., Tas, A. and Stegeman, H.
year	1993
title	A decision support system for housing of (public) organizations
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	In this paper we present a hierarchical decision support system for the allocation of organisations to available buildings, and for the allocation of employees of an organisation to the work units of a building. For both allocation problems a mathematical model and optimisation algorithm is developed, taking into account the relevant criteria, such as the extent to which the allocated floorspace is in accordance with the standards, and the extent to which departments are housed in connecting zones of a building. The decision support system is illustrated by two practical applications.
series	DDSS
last changed	2003/08/07 16:36

_id	d9fa
authors	Salomon, Gavriel
year	1990
title	Effects with and of Computers and the Study of Computer-based Learning Environments
source	Chapter in Computer-Based Learning Environments and Problem Solving, ed. E. De Corte, M. C. Linn, H. Mandl, and L. Verschaffel. New York: Springer-Verlag
summary	Several factors have contributed to the developments in computer-based learning environments. Improvements and advances in hardware capabilities have afforded greater computing power. Advances in cognitive and instructional science have moved thinking beyond the limits of behavioural psychology. The new systems of computer-based learning environments are being designed with a view to facilitating complex problem-solving through integrating wholes of knowledge (Dijkstra, Krammer & Merriënboer, 1992). Thus, many see in the computer a means to enhance students' cognitive skills and general problem-solving ability. This is in spite of the fact that studies have failed to conclusively confirm the hypothesis that computer-based learning environments facilitate the acquisition and transfer of higher-order thinking and learning skills (Dijkstra, Krammer & Merriënboer, 1992). Salomon (1992) argues that computers make possible student involvement in higher-order thinking skills by performing many of the lower-level cognitive tasks, by providing memory support and by juggling interrelated variables. Through a partnership with the computer, the user may also benefit from the effect of cognitive residue resulting in improvement or mastery of a skill or strategy. Salomon explains: The intellectual partnership with computer tools creates a zone of proximal development whereby learners are capable of carrying out tasks they could not possible carry out without the help and support provided by the computer. This partnership can both offer guidance that might be internalized to become self-guidance and stimulate the development of yet underdeveloped skills, resulting in a higher level of skill mastery (p.252).
series	other
last changed	2003/04/23 15:14

_id	2db4
authors	Schmitt, Gerhard
year	1992
title	Design for Performance
source	New York: John Wiley & Sons, 1992. pp. 83-100 : ill. includes bibliography Design for performance describes a generative approach toward fulfilling qualitative and quantitative design requirements based on specification and existing cases. The term design applies to the architectural domain: the term performance includes the aesthetic, quantitative, and qualitative behavior of an artifact. In achieving architectural quality while adhering to measurable criteria, design for performance has representational, computational, and practical advantages over traditional methods, in particular over post-facto single- and multicriteria analysis and evaluation. In this paper a proposal for a working model and a partial implementation of this model are described. architecture / evaluation / performance / synthesis / design / representation / prediction / integration. Ô h)000*°° ÔŒ21. Schneekloth, Lynda H., Rajendra K. Jain and Gary E. Day. 'Wind Study of Pedestrian Environments.' February, 1989. 30, [2] p. : ill. includes bibliography and index.
summary	This report summarizes Part 1 of the research on wind conditions affecting pedestrian environments for the State University of New York at Buffalo. Part 1 reports on existing conditions in the main part of the North Campus in Amherst. Procedures and methods are outlined, the profile of the current situation reported, and a special study on the proposed Natural Science and Math Building are included
keywords	architecture, research, evaluation, analysis, simulation, hardware
series	CADline
last changed	1999/02/12 15:09

_id	eaff
authors	Shaviv, Edna and Kalay, Yehuda E.
year	1992
title	Combined Procedural and Heuristic Method to Energy Conscious Building Design and Evaluation
source	New York: John Wiley & Sons, 1992. pp. 305-325 : ill. includes bibliography
summary	This paper describes a methodology that combines both procedural and heuristic methods by means of integrating a simulation model with a knowledge based system (KBS) for supporting all phases of energy conscious design and evaluation. The methodology is based on partitioning the design process into discrete phases and identifying the informational characteristics of each phase, as far as energy conscious design is concerned. These informational characteristics are expressed in the form of design variables (parameters) and the relationships between them. The expected energy performance of a design alternative is evaluated by a combination of heuristic and procedural methods, and the context-sensitive application of default values, when necessary. By virtue of combining knowledge based evaluations with procedural ones, this methodology allows for testing the applicability of heuristic rules in non-standard cases,Ô h)000*°° ÔŒ thereby improving the predictable powers of the evaluation
keywords	design process, evaluation, energy, analysis, synthesis, integration, architecture, knowledge base, heuristics, simulation
series	CADline
email
last changed	2003/06/02 10:24

_id	0ca0
authors	Späti, Jürg and Van Zutphen, R.H.M.
year	1992
title	Form And Performance in Design Education (Basic Architectural Unit 5)
doi	https://doi.org/10.52842/conf.ecaade.1992.535
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 535-542
summary	There are some fundamental issues in todays architectural education which seem important yet very hard to achieve. One of this issues is the interdependence between design and technology. There is one group in architectural education which beliefs that the question of how to conceive (arch.) and how to construct (arch.) are interdependent. Consequently in this line of thinking the design concept requires verification on a technological level. The second issue which has often been debated is performance. Related to it is a line of thinking which is not satisfied with the formal issues of design - and how it looks, but wants to carry design to point where you also know - what it does and with it how much it costs. Cost-consciousness is the final issue addressed. We all know that there are limits to what a school can do or what a school can be. And, there is an essential difference between practise and education. Yet at the same time the argument is that only consciousness is required thus leading to the basic understanding that form performance and costs are interrelated and interdependent issues in architectural design.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	592a
authors	Takemura, H. and Kishino, F.
year	1992
title	Cooperative work environment using virtual workspace
source	Proceedings of the Conference on Computer-Supported Cooperative Work: 226-232. New York: The Association for Computing Machinery
summary	A virtual environment, which is created by computer graphics and an appropriate user interface, can be used in many application fields, such as teleopetution, telecommunication and real time simulation. Furthermore, if this environment could be shared by multiple users, there would be more potential applications. Discussed in this paper is a case study of building a prototype of a cooperative work environment using a virtual environment, where more than two people can solve problemscooperatively, including design strategies and implementirig issues. An environment where two operators can directly grasp, move or release stereoscopic computer graphics images by hand is implemented. The system is built by combining head position tracking stereoscopic displays, hand gesture input devices and graphics workstations. Our design goal is to utilize this type of interface for a future teleconferencing system. In order to provide good interactivity for users, we discuss potential bottlenecks and their solutions. The system allows two users to share a virtual environment and to organize 3-D objects cooperatively.
series	other
last changed	2003/04/23 15:50

For more results click below: