Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2040

Reformat results as: short short into frame detailed detailed into frame

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
doi	https://doi.org/10.52842/conf.acadia.2000.137
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	sigradi2017_068
id	sigradi2017_068
authors	da Motta Gaspar, João Alberto; Regina Coeli Ruschel
year	2017
title	A evolução do significado atribuído ao acrônimo BIM: Uma perspectiva no tempo [The evolution of the meaning ascribed to the acronym BIM: A perspective in time]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.461-469
summary	The term Building Information Model emerged in 1992. It has evolved over time and has its meaning currently associated with an object-oriented modeling technology and an associated set of processes to produce, communicate and analyze building models. Its origin is related to several other, older terms. This paper registers the evolution of BIM and related definitions over time by means of a systematic literature review. We present a list of BIM-related terms and their meanings, organized by date of emergence, and charts showing which ones are most used over time, contributing to better understanding of the meaning of BIM.
keywords	BIM; History of BIM; Building Information Model.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	1076
authors	Gero, John S. and Saunders, Robert
year	2000
title	Constructed Representations and Their Functions in Computational Models of Designing
doi	https://doi.org/10.52842/conf.caadria.2000.215
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 215-224
summary	This paper re-examines the conclusions made by Schön and Wiggins in 1992 that computers were unable to reproduce processes crucial to designing. We propose that recent developments in artificial intelligence and design computing put us in a position where we can begin to computationally model designing as conceived by Schön and Wiggins. We present a computational model of designing using situated processes that construct representations. We show how constructed representations support computational processes that model the different kinds of seeing reported in designing. We also present recently developed computational processes that can identify unexpected consequences of design actions using adaptive novelty detection.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ascaad2006_paper18
id	ascaad2006_paper18
authors	Huang, Chie-Chieh
year	2006
title	An Approach to 3D Conceptual Modelling
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This article presents a 3D user interface required by the development of conceptual modeling. This 3D user interface provides a new structure for solving the problems of difficult interface operations and complicated commands due to the application of CAD 2D interface for controlling 3D environment. The 3D user interface integrates the controlling actions of “seeing – moving –seeing” while designers are operating CAD (Schön and Wiggins, 1992). Simple gestures are used to control the operations instead. The interface also provides a spatial positioning method which helps designers to eliminate the commands of converting a coordinate axis. The study aims to discuss the provision of more intuitively interactive control through CAD so as to fulfil the needs of designers. In our practices and experiments, a pair of LED gloves equipped with two CCD cameras for capturing is used to sense the motions of hands and positions in 3D. In addition, circuit design is applied to convert the motions of hands including selecting, browsing, zoom in / zoom out and rotating to LED switches in different colours so as to identify images.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	e1f9
authors	Carini, A., Apollonio, F. And Tolomellia, A.
year	1992
title	RESEARCH ACTIVITY 1990-92 AT THE L.T.N.-OIKOS BOLOGNA: EUROPAN AND BARRIER-FREE BATHROOMS
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 31-42
summary	During the three year period 1990-1992, the research activity carried out in the Typological Laboratory has been focused on two specific themes: flexibility and typological innovation in dwelling-areas and features of the bathroom for disabled users. These themes reflect two among the chief subjects calling the attention of the Residential Building Committee of the Ministry of Public Works to which - as everybody knows - the Laboratory is subordinated. Both themes have been approached through specific application pro rams which took as reference points, respectively, the Programm of EUROPAN Competitions and the proposals for bringing up to date.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:29

_id	cc68
authors	García, Agustín Pérez
year	1992
title	Learning Structural Design - Computers and Virtual Laboratories
doi	https://doi.org/10.52842/conf.ecaade.1992.525
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 525-534
summary	This paper shows how the spreading use of computers can improve the quality of education, specially in the field of architecture. An Innovative Teaching Project oriented to the discipline Structural Design of Buildings has been implemented at the School of Architecture of Valencia. The main objective of this project is the transformation of the computer room into a virtual laboratory for simulating the behaviour of structural typologies using mathematical models of them. An environment, specially oriented to Structural Design, has been integrated in a Computer Aided Design platform to teach how design the Structure of Buildings.
series	eCAADe
last changed	2022/06/07 07:51

_id	ed4a
authors	Kalisperis, Loukas N. and Groninger, Randal L.
year	1992
title	Design Philosophy: Implications for Computer Integration in the Practice of Architecture
doi	https://doi.org/10.52842/conf.acadia.1992.027
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 27-37
summary	The growing complexities of modern environments and the socioeconomic pressures to maintain efficient design/build cycles have forced architects to seek new tools and methods to help them manage the processes that have developed as a result of new knowledge in architectural design. This trend has accelerated in the past few decades because of developments in both cognitive and computer sciences. In allied disciplines, the introduction and use of comPuters have significantly improved design practices. Yet at best, in disciplines such as architectural design, computational aids have attained marginal improvements in the design process despite efforts by universities in the professional education of architects.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	e7c8
authors	Kalisperis, Loukas N., Steinman, Mitch and Summers, Luis H.
year	1992
title	Design Knowledge, Environmental Complexity in Nonorthogonal Space
source	New York: John Wiley & Sons, 1992. pp. 273-291 : ill. includes bibliography
summary	Mechanization and industrialization of society has resulted in most people spending the greater part of their lives in enclosed environments. Optimal design of indoor artificial climates is therefore of increasing importance. Wherever artificial climates are created for human occupation, the aim is that the environment be designed so that individuals are in thermal comfort. Current design methodologies for radiant panel heating systems do not adequately account for the complexities of human thermal comfort, because they monitor air temperature alone and do not account for thermal neutrality in complex enclosures. Thermal comfort for a person is defined as that condition of mind which expresses satisfaction with the thermal environment. Thermal comfort is dependent on Mean Radiant Temperature and Operative Temperature among other factors. In designing artificial climates for human occupancy the interaction of the human with the heated surfaces as well the surface-to-surface heat exchange must be accounted for. Early work in the area provided an elaborate and difficult method for calculating radiant heat exchange for simplistic and orthogonal enclosures. A new improved method developed by the authors for designing radiant panel heating systems based on human thermal comfort and mean radiant temperature is presented. Through automation and elaboration this method overcomes the limitations of the early work. The design procedure accounts for human thermal comfort in nonorthogonal as well as orthogonal spaces based on mean radiant temperature prediction. The limitation of simplistic orthogonal geometries has been overcome with the introduction of the MRT-Correction method and inclined surface-to-person shape factor methodology. The new design method increases the accuracy of calculation and prediction of human thermal comfort and will allow designers to simulate complex enclosures utilizing the latest design knowledge of radiant heat exchange to increase human thermal comfort
keywords	applications, architecture, building, energy, systems, design, knowledge
series	CADline
last changed	2003/06/02 10:24

_id	8824
authors	Perkins, N. H.
year	1992
title	Three questions on the use of photo-realistic simulations as real world surrogates
source	Landscape and Urban Planning 21, pp. 265-267
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:41

_id	43bb
authors	Wojtowicz, Jerzy, Davidson, James N. and Mitchell, William J.
year	1992
title	Design as Digital Correspondence
doi	https://doi.org/10.52842/conf.acadia.1992.089
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 89-101
summary	This chapter is concerned with illustrating the potential and limitations of structured, "long distance"' design collaboration utilizing computational and telecommunication tools. Digital design collaboration makes new demands on both the computational tools and the process of making architecture.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	0ff4
authors	Woodbury, R.F., Radford, A.D., Taplin, P.N. and Coppins, S.A.
year	1992
title	Tartan Worlds: A Generative Symbol Grammar System
doi	https://doi.org/10.52842/conf.acadia.1992.211
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 211-220
summary	Tartan Worlds is a highly interactive, generative symbol grammar system that generates designs as two dimensional configurations of symbols on tartan grids. It operates with multiple graphical rule sets on multiple design worlds. Designers can operate directly on rules and worlds. In this chapter we will introduce the system Tartan Worlds as implemented on the Apple Macintosh.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	2005_287
id	2005_287
authors	Achten, Henri and Reymen, Isabelle
year	2005
title	Structured Reflection as a Means to Deepen Understanding of CAAD
doi	https://doi.org/10.52842/conf.ecaade.2005.287
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 287-294
summary	In this paper we outline a strategy of structured reflection to improve reflection by students in a course on the implication of CAAD, design theory, and design methodology. Earlier editions of the course showed that students often did not evolve their learning beyond a checklist level. Reflection is an important mechanism to improve learning from design situations. After a consideration of the main approaches to design reflection, we take up Schön’s notion of reflection and provide support for structured reflection in CAAD education, based on earlier experiences with structured question lists in a civil engineering course. Findings after the first year’s run show a deeper level of reflection on a more elaborate level.
keywords	Structured Reflection, CAAD, Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	4b55
authors	Af Klercker, J. , Ekholm, A. and Fridqvist, S. (Ed.)
year	1996
title	Education for Practice [Conference Proceedings]
doi	https://doi.org/10.52842/conf.ecaade.1996
source	14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2 / Lund (Sweden) 12-14 September 1996, 425 p.
summary	There are many of us trying to make place for CAAD in a natural way in the Curriculum of the Architect school. We would like to make CAAD useful to the students already during their studies. Even if we have the support of our collegues for running courses there is very often no space in the timetable. And even if we have all the entusiasm of our students it is hard to practice your CAAD knowledge on projects where it is not asked for. The education of architects in the use of computers has lead me to try to find "the roots of education of architects" in general. A collegue of mine in a bookshelf of course litterature in Informatics found and put into my hands "Educating the reflective practitioner" by Donald Schön. It lead to an interesting process of personal reflection and discussion within our CAAD team. We think by the way that the theme of the conference points to the heart of the message in Donald Schöns book and we are inviting him as a key note speaker at the Conference.
series	eCAADe
type	normal paper
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:49

_id	caadria2005_a_2c_b
id	caadria2005_a_2c_b
authors	Geeta Arjun
year	2005
title	An Agent Facilitated Design Conversation System for Aiding Creative Thinking in Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2005.216
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 1, pp. 216-221
summary	This paper presents an on-going research aimed at designer support in the conceptual stages of architectural design. It is argued that collaboration plays an important role at every stage of the design process. Extending Schön's seminal theory of 'design as a conversation', the support of the conceptual architectural design process is proposed as a dialogue between the designer and the computational agents wherein the agents adopt the role of design team members. The dialogue is theoretically aimed at triggering the experiential memory of the designer and associating significant experiences from different domains of the design problem to stimulate creative thinking. The paper presents an outline of the proposed model for a design-conversation system implementing computational agents in a blackboard architecture environment.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2009_009
id	caadria2009_009
authors	Herr, Christiane Margerita
year	2009
title	Appropriating Donald Schön
doi	https://doi.org/10.52842/conf.caadria.2009.483
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 483-492
summary	Donald Schön embraces a constructivist approach to learning and research., characterising designing as a reflective conversation between designer and the materials of a design situation. Accordingly, Schön’s views on digital design support are based on his valuing of indeterminacy, surprise and ambiguity as opportunities to develop new understanding and insight. His criticism of technical rationality is directed towards the privileging of formal and codified knowledge over embodied and tacit forms of knowing. While Schön’s work is increasingly acknowledged in recent CAAD research, respective publications typically remain within the technical rationality perspective. Based on several characteristic examples, this paper examines how Schön’s ideas are absorbed into a perspective incongruous to his own, concluding with a discussion of potential new research approaches that sustain Schön’s values.
keywords	reflective practice, constructivism, design theory, Donald Schön, epistemology
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2005_1_41_53
id	cf2005_1_41_53
authors	KVAN Thomas and GAO Song
year	2005
title	Examining Learning in Multiple Settings
source	Computer Aided Architectural Design Futures 2005 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Futures / ISBN 1-4020-3460-1] Vienna (Austria) 20–22 June 2005, pp. 187-197
summary	We use linkographs as a means to examine single and double loop learning within three designed settings. Two types of learning are dynamic processes related to design process. The linkograph is a technique to examine the inter-connective pattern of design moves. Extending our previous analysis of design communications, we investigate the extent to which Schön's design process consisting of “framing-moving-reflecting” can be identified in communications. The linkographs identify learning loops, the results support prior findings that distal text based communication, although less extensive, is richer in design exchanges; here richer learning is also identified.
keywords	learning, design process, linkograph
series	CAAD Futures
email
last changed	2006/11/07 07:27

_id	fb56
id	fb56
authors	Kvan, Thomas; Thilakaratne, Ruffina
year	2003
title	MODELS IN THE DESIGN CONVERSATION: ARCHITECTURE VS ENGINEERING, DESIGN + RESEARCH: PROJECT BASED RESEARCH IN ARCHITECTURE
source	Editors: Clare Newton, Sandra Kaji-O'Grady and Simon Wollan ISSN: 1449 1737, Association of Architecture Schools of Australasia, 2003 Melbourne, Australia
summary	Models are used in architectural design for several purposes. Early in a design cycle, sketch or study models will be created to examine particular aspects of a design idea. Such models are often assembled rapidly and crudely for it is the immediacy of the feedback that is sought. At later stages in a design cycle, more carefully assembled detailed models may be created to present ideas to colleagues, clients or decision-making bodies. Extending Schön’s observation that drawing is a process of conversation, we observe that models also participate in conversations. The introduction of digital media changes the nature of the conversation. This research revisits the role of models in the design conversation. It has been noted that models can be classified in two roles: ‘models of’ and ‘models for’. In architecture, we extend this by adding ‘models with’ as we employ three and two dimensional representations in the conversations of design. This paper presents experiences with students in the use of Rapid Prototyping technologies and manually made physical models in design tasks.
keywords	Rapid prototyping; models
series	other
type	normal paper
email
more	http://www.arbld.unimelb.edu.au/events/conferences/aasa/papers
last changed	2004/09/24 14:36

_id	cf2009_771
id	cf2009_771
authors	LaBelle, Guillaume; Nembrini, Julien and Huang, Jeffrey
year	2009
title	Programming framework for architectural design ANAR+: Object oriented geometry
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 771- 785
summary	From the recent advent of scripting tools integrated into commercial CAAD software and everyday design practice, the use of programming applied to an architectural design process becomes a necessary field of study. The presented research explores the use of programming as explorative and reflexive medium (Schön, 1983) through the development of a programming framework for architectural design. Based on Java, the ANAR+ library is a parametric geometry environment meant to be used as programming interface by designers. Form exploration strategies based on parametric variations depend on the internal logic description, a key role for form generation. In most commercial CAD software, geometric data structures are often predefined objects, thus constraining the form exploration, whereas digital architectural research and teaching are in need for an encompassing tool able to step beyond new software products limitations.
keywords	Parametric design, programming language, architectural Geometry, pro-cessing
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	caadria2024_513
id	caadria2024_513
authors	Lim, Chor-Kheng
year	2024
title	From Pencil to Pixel: The Evolution of Design Ideation Tools
doi	https://doi.org/10.52842/conf.caadria.2024.3.089
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 3, pp. 89–98
summary	This study explores the integration of Artificial Intelligence-Generated Content (AIGC) in design processes, focusing on the ideation phase. Utilizing in-depth interviews with experienced designers and an experimental approach with novices, it compares AIGC tools like ChatGPT, Midjourney and Copilot with traditional sketching methods. The findings reveal two distinct operational patterns in AIGC utilization: a subtractive method of refining AI outputs and an additive method of evolving design through AI suggestions. Experienced designers view AIGC as a powerful aid for creative ideation, while novices prefer familiar hand-drawing methods. The study proposes a "Seeing-Instructing-Seeing" model, adapting Schön's reflective practice model, to incorporate the collaborative dynamic between designers and AI, marking a shift from manual to intellectual labor in design ideation. This represents a paradigm shift in design methodologies, suggesting a future of co-creative partnerships between designers and AI tools.
keywords	AIGC, Ideation Design Process, Textual Thinking, Creativity
series	CAADRIA
email
last changed	2024/11/17 22:05

For more results click below: