Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3150

Reformat results as: short short into frame detailed detailed into frame

_id	4857
authors	Escola Tecnica Superior D'arquitectura de Barcelona (Ed.)
year	1992
title	CAAD Instruction: The New Teaching of an Architect?
doi	https://doi.org/10.52842/conf.ecaade.1992
source	eCAADe Conference Proceedings / Barcelona (Spain) 12-14 November 1992, 551 p.
summary	The involvement of computer graphic systems in the transmission of knowledge in the areas of urban planning and architectural design will bring a significant change to the didactic programs and methods of those schools which have decided to adopt these new instruments. Workshops of urban planning and architectural design will have to modify their structures, and teaching teams will have to revise their current programs. Some european schools and faculties of architecture have taken steps in this direction. Others are willing to join them. This process is only delayed by the scarcity of material resources, and by the slowness with which a sufficient number of teachers are adopting these methods. ECAADE has set out to analyze the state of this issue during its next conference, and it will be discussed from various points of view. From this confrontation of ideas will come, surely, the guidelines for progress in the years to come. The different sessions will be grouped together following these four themes: (A.) Multimedia and Course Work / State of the art of the synthesis of graphical and textual information favored by new available multimedia computer programs. Their repercussions on academic programs. (B.) The New Design Studio / Physical characteristics, data concentration and accessibility of a computerized studio can be better approached in a computerized workshop. (C.) How to manage the new education system / Problems and possibilities raised, from the practical and organizational points of view, of architectural education by the introduction of computers in the classrooms. (D.) CAAI. Formal versus informal structure / How will the traditional teaching structure be affected by the incidence of these new systems in which the access to knowledge and information can be obtained in a random way and guided by personal and subjective criteria.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	e51d
authors	Fazio, P., Bedard, C. and Gowri, K.
year	1992
title	Constraints for Generating Building Envelope Design Alternatives
source	New York: John Wiley & Sons, 1992. pp. 145-155 : charts. includes bibliography
summary	The building envelope design process involves selecting materials and constructional types for envelope components. Many different materials need to be combined together for wall and roof assemblies to meet the various performance requirements such as thermal efficiency, cost, acoustic and fire resistances. The number of performance attributes to be considered in the design process is large. Lack of information, time limitations and the large number of feasible design alternatives generally force the designer to rely on past experience and practical judgement to make rapid design decisions. Current work at the Centre for Buildings Studies focuses on the development of knowledge-based synthesis and evaluation techniques for reducing the problems of information handling and decision making in building envelope design. The generation of design alternatives is viewed as a search process that identifies feasible combinations of building envelope components satisfying a set of performance requirements, material compatibility, practicality of design, etc. This paper discusses knowledge acquisition and representation issues involved in the definition of constraints to guide the generation of feasible combinations of envelope components
keywords	envelope, knowledge base, knowledge acquisition, representation, performance, design, structures, architecture, evaluation
series	CADline
last changed	2003/06/02 14:41

_id	60e3
authors	LEA-EPFL (ed.)
year	1992
title	Part C: Full-scale Modelling in Student Exercises
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, 59 p.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
email
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	d9fa
authors	Salomon, Gavriel
year	1990
title	Effects with and of Computers and the Study of Computer-based Learning Environments
source	Chapter in Computer-Based Learning Environments and Problem Solving, ed. E. De Corte, M. C. Linn, H. Mandl, and L. Verschaffel. New York: Springer-Verlag
summary	Several factors have contributed to the developments in computer-based learning environments. Improvements and advances in hardware capabilities have afforded greater computing power. Advances in cognitive and instructional science have moved thinking beyond the limits of behavioural psychology. The new systems of computer-based learning environments are being designed with a view to facilitating complex problem-solving through integrating wholes of knowledge (Dijkstra, Krammer & Merriënboer, 1992). Thus, many see in the computer a means to enhance students' cognitive skills and general problem-solving ability. This is in spite of the fact that studies have failed to conclusively confirm the hypothesis that computer-based learning environments facilitate the acquisition and transfer of higher-order thinking and learning skills (Dijkstra, Krammer & Merriënboer, 1992). Salomon (1992) argues that computers make possible student involvement in higher-order thinking skills by performing many of the lower-level cognitive tasks, by providing memory support and by juggling interrelated variables. Through a partnership with the computer, the user may also benefit from the effect of cognitive residue resulting in improvement or mastery of a skill or strategy. Salomon explains: The intellectual partnership with computer tools creates a zone of proximal development whereby learners are capable of carrying out tasks they could not possible carry out without the help and support provided by the computer. This partnership can both offer guidance that might be internalized to become self-guidance and stimulate the development of yet underdeveloped skills, resulting in a higher level of skill mastery (p.252).
series	other
last changed	2003/04/23 15:14

_id	ddss9201
id	ddss9201
authors	Van Bakel, A.P.M.
year	1993
title	Personality assessment in regard to design strategies
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper discusses some preliminary results of several knowledge-acquisition and documentation-structuring techniques that were used to assess the working styles of architects. The focus of this assessment was on their strategic design behaviour. Hettema's Interactive Personality Model (Hettema 1979, 1989) was used to explain and interpret these results. The methods used to acquire the necessary data are protocol analysis, card sorting and interviews. The results suggest that at least three parameters can be used to explain and differentiate the strategic design behaviour of architects. These parameters are S (site-oriented), B (brief-oriented) and C (concept-oriented). A priority hierarchy of these parameters reveals six major distinguishable working styles. These results are captured in a new design model that can be used in data bank implementations.
series	DDSS
last changed	2003/08/07 16:36

_id	3ff5
authors	Abbo, I.A., La Scalea, L., Otero, E. and Castaneda, L.
year	1992
title	Full-Scale Simulations as Tool for Developing Spatial Design Ability
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 7-10
summary	Spatial Design Ability has been defined as the capability to anticipate effects (psychological impressions on potential observers or users) produced by mental manipulation of elements of architectural or urban spaces. This ability, of great importance in choosing the appropriate option during the design process, is not specifically developed in schools of architecture and is partially obtained as a by-product of drawing, designing or architectural criticism. We use our Laboratory as a tool to present spaces to people so that they can evaluate them. By means of a series of exercises, students confront their anticipations with the psychological impressions produced in other people. For this occasion, we present an experience in which students had to propose a space for an exhibition hag in which architectural projects (student thesis) were to be shown. Following the Spatial Design Ability Development Model which we have been using for several years, students first get acquainted with the use of evaluation instruments for psychological impressions as well as with research methodology. In this case, due to the short period available, we reduced research to investigate the effects produced by the manipulation of only 2 independents variables: students manipulated first the form of the roof, walls and interiors elements, secondly, color and texture of those elements. They evaluated spatial quality, character and the other psychological impressions that manipulations produced in people. They used three dimensional scale models 1/10 and 1/1.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
email
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	6208
authors	Abou-Jaoude, Georges
year	1992
title	To Master a Tool
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, p. 15
summary	The tool here is the computer or to be precise, a unit that includes the computer, the peripherals and the software needed to fulfill a task. These tools are getting very sophisticated and user interfaces extremly friendly, therefore it is very easy to become the slave of such electronic tools and reach self satisfaction with strait forward results and attractive images. In order to master and not to become slaves of sophisticated tools, a very solid knowledge of related fields or domains of application becomes necessary. In the case of this seminar, full scale modelling, is a way to understand the relation between a mental model and it's full-scale modelling, it is a way of communicating what is in a designers mind. Computers and design programs can have the same goal, rather than chosing one method or the other let us try to say how important it is today to complement designing with computer with other means and media such as full scale modelling, and what computer modelling and simulation can bring to full scale modelling or other means.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	4704
authors	Amirante, I., Rinaldi, S. and Muzzillo, F.
year	1992
title	A Tutorial Experiment Concerning Dampness Diagnosis Supported by an Expert System
doi	https://doi.org/10.52842/conf.ecaade.1992.159
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 159-172
summary	(A) The teaching of Technology of Building Rehabilitation in Italian Universities - (B) Experimental course of technological rehabilitation with computer tools - (C) Synthesis of technological approach - (D) Dampness diagnostic process using the Expert System - (E) Primary consideration on tutorial experience - (F) Bibliography
series	eCAADe
last changed	2022/06/07 07:54

_id	7291
authors	Arvesen, Liv
year	1992
title	Measures and the Unmeasurable
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 11-16
summary	Nowhere do we ever find a similar environment as the one related to the tea ceremony. We may learn from the teamasters as we may learn from our masters of architecture. Directly and indirectly we are influenced by our surroundings which have been proved by research and which we ourselves experience in our daily life. The full scale experiments have been made on this subject. Related to the nervous mind the experiments were concentrated of form expressing safety and peace.
keywords	Full-scale Modeling,Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
doi	https://doi.org/10.52842/conf.acadia.2000.137
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	b602
authors	Bosselmann, P.
year	1992
title	Visual Simulation in Urban Design
source	Institute of Urban and Regional Development, University of California at Berkeley Working Paper No. 587, pp. 1-15
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	91c4
authors	Checkland, P.
year	1981
title	Systems Thinking, Systems Practice
source	John Wiley & Sons, Chichester
summary	Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series	other
last changed	2003/04/23 15:14

_id	2325
authors	Chilton, John C.
year	1992
title	Computer Aided Structural Design in Architectural Instruction
doi	https://doi.org/10.52842/conf.ecaade.1992.443
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 443-450
summary	In schools of architecture there is a tendency to associate the use of computers solely with the production of graphic images as part of the architectural design process. However, if the architecture is to work as a building it is also essential that technical aspects of the design are adequately investigated. One of the problem areas for most architectural students is structural design and they are often reluctant to use hand calculations to determine sizes of structural elements within their projects. In recent years, much of the drudgery of hand calculation has been removed from the engineer by the use of computers, and this has, hopefully, allowed a more thorough investigation of conceptual ideas and alternatives. The same benefit is now becoming available to architectural students. This is in the form of structural analysis and design programs that can be used, even by those having a limited knowledge of structural engineering, to assess the stability of designs and obtain approximate sizes for individual structural elements. The paper discusses how the use of such programs is taught, within the School of Architecture at Nottingham. Examples will be given of how they can assist students in the architectural design process. In particular, the application of GLULAM, a program for estimating sizes of laminated timber elements and SAND, a structural analysis and design package, will be described.
series	eCAADe
last changed	2022/06/07 07:55

_id	cf73
authors	Dosti, P., Martens, B. and Voigt, A.
year	1992
title	Spatial Simulation In Architecture, City Development and Regional Planning
doi	https://doi.org/10.52842/conf.ecaade.1992.195
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 195-200
summary	The appropriate use of spatial simulation techniques considerably tends to increase the depth of evidence and the realistic content of the design and plannings to be described and moreover may encourage experimentations, trial attempts and planning variants. This means also the more frequent use of combinations between different techniques, having in mind that they are not equivalent, but making use of the respective advantages each offers. Until now the main attention of the EDP-Lab was directed on achieving quantity. For the time to come time it will be the formation of quality. The challenge in the educational system at the Vienna University of Technology is to obtain appropriate results in the frame- work of low-cost simulation. This aspect seems also to be meaningful in order to enforce the final implementation in architectural practice.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/
last changed	2022/06/07 07:55

_id	bb54
authors	Dourish, P. and Bly, S.
year	1992
title	Portholes: Supporting Awareness in a Distributed Work Group
source	Proceedings of SIG CHI '92, pp. 541-547
summary	We are investigating ways in which media space technologies can support distributed work groups through access to information that supports general awareness. Awareness involves knowing who is “around”, what activities are occurring, who is talking with whom; it provides a view of one another in the daily work environments. Awareness may lead to informal interactions, spontaneous connections, and the development of shared cultures—all important aspects of maintaining working relationships which are denied to groups distributed across multiple sites. The Portholes project, at Rank Xerox EuroPARC in Cambridge, England, and Xerox PARC in Palo Alto, California, demonstrates that awareness can be supported across distance. A data network provides a shared database of image information that is regularly updated and available at all sites. Initial experiences of the system in use at EuroPARC and PARC suggest that Portholes both supports shared awareness and helps to build a “sense of community”.
series	other
last changed	2003/04/23 15:50

_id	6ea4
authors	Eastman, C.M.
year	1992
title	A Data Model Analysis of Modularity and Extensibility in Building Databases
source	Building and Environment, Vol 27, No: 2, pp. 135-148
summary	This paper uses data modeling techniques to define how database schemas for an intelligent integrated architectural CAD system can be made extensible. It reviews the product data modeling language EDM, then applies it to define a part of an architectural data model. Extensions are then investigated, regarding how users could integrate various design-specific packages into a uniquely configured system. Both, extension by substituting one technology for another and by adding a new evaluation application, are considered. Data modeling allows specification of a CAD database and identification of the kind of modularization that will work and what problems may arise.''
series	journal paper
email
last changed	2003/04/23 15:14

_id	a93f
authors	Eisenman, P.
year	1992
title	Visions unfolding: architecture in the age of electronic media
source	Domus, 1/92
summary	During the fifty years sinee the Second World War, a paradigm shift has taken place that should have profoundly affected architecture: this was the shift from the mechanicai paradigm to the electrorlic one. This change can be simply understood by comparing the impact of the role of the human subject on such primary modes of reproduction as the photograph and the fax; the photograph within the mechanical paradigm, the fax within the electronic one. In photographic reproduction the subiect still maintains a controlled interaction with the object. A photograph can be developed with more or less contrast, texture or clarity.
series	journal paper
last changed	2003/04/23 15:50

_id	cc68
authors	García, Agustín Pérez
year	1992
title	Learning Structural Design - Computers and Virtual Laboratories
doi	https://doi.org/10.52842/conf.ecaade.1992.525
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 525-534
summary	This paper shows how the spreading use of computers can improve the quality of education, specially in the field of architecture. An Innovative Teaching Project oriented to the discipline Structural Design of Buildings has been implemented at the School of Architecture of Valencia. The main objective of this project is the transformation of the computer room into a virtual laboratory for simulating the behaviour of structural typologies using mathematical models of them. An environment, specially oriented to Structural Design, has been integrated in a Computer Aided Design platform to teach how design the Structure of Buildings.
series	eCAADe
last changed	2022/06/07 07:51

_id	6cfd
authors	Harfmann, Anton C. and Majkowski, Bruce R.
year	1992
title	Component-Based Spatial Reasoning
doi	https://doi.org/10.52842/conf.acadia.1992.103
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 103-111
summary	The design process and ordering of individual components through which architecture is realized relies on the use of abstract "models" to represent a proposed design. The emergence and use of these abstract "models" for building representation has a long history and tradition in the field of architecture. Models have been made and continue to be made for the patron, occasionally the public, and as a guide for the builders. Models have also been described as a means to reflect on the design and to allow the design to be in dialogue with the creator. The term "model" in the above paragraph has been used in various ways and in this context is defined as any representation through which design intent is expressed. This includes accurate/ rational or abstract drawings (2- dimensional and 3-dimensional), physical models (realistic and abstract) and computer models (solid, void and virtual reality). The various models that fall within the categories above have been derived from the need to "view" the proposed design in various ways in order to support intuitive reasoning about the proposal and for evaluation purposes. For example, a 2-dimensional drawing of a floor plan is well suited to support reasoning about spatial relationships and circulation patterns while scaled 3-dimensional models facilitate reasoning about overall form, volume, light, massing etc. However, the common denominator of all architectural design projects (if the intent is to construct them in actual scale, physical form) are the discrete building elements from which the design will be constructed. It is proposed that a single computational model representing individual components supports all of the above "models" and facilitates "viewing"' the design according to the frame of reference of the viewer. Furthermore, it is the position of the authors that all reasoning stems from this rudimentary level of modeling individual components. The concept of component representation has been derived from the fact that a "real" building (made from individual components such as nuts, bolts and bar joists) can be "viewed" differently according to the frame of reference of the viewer. Each individual has the ability to infer and abstract from the assemblies of components a variety of different "models" ranging from a visceral, experiential understanding to a very technical, physical understanding. The component concept has already proven to be a valuable tool for reasoning about assemblies, interferences between components, tracing of load path and numerous other component related applications. In order to validate the component-based modeling concept this effort will focus on the development of spatial understanding from the component-based model. The discussions will, therefore, center about the representation of individual components and the development of spatial models and spatial reasoning from the component model. In order to frame the argument that spatial modeling and reasoning can be derived from the component representation, a review of the component-based modeling concept will precede the discussions of spatial issues.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	d919
authors	Heckbert, P.S.
year	1992
title	Discontinuity Meshing for Radiosity
source	Eurographics Workshop on Rendering. May 1992, pp. 203-216
summary	The radiosity method is the most popular algorithm for simulating interreflection of light between diffuse surfaces. Most existing radiosity algorithms employ simple meshes and piecewise constant approximations, thereby constraining the radiosity function to be constant across each polygonal element. Much more accurate simulations are possible if linear, quadratic, or higher degree approximations are used. In order to realize the potential accuracy of higher-degree approximations, however, it is necessary for the radiosity mesh to resolve discontinuities such as shadow edges in the radiosity function. A discontinuity meshing algorithm is presented that places mesh boundaries directly along discontinuities. Such algorithms offer the potential of faster, more accurate simulations. Results are shown for three-dimensional scenes.
series	other
last changed	2003/04/23 15:14

For more results click below: