Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 7897

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9211
id	ddss9211
authors	Gilleard, J. and Olatidoye, O.
year	1993
title	Graphical interfacing to a conceptual model for estimating the cost of residential construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper presents a method for determining elemental square foot costs and cost significance for residential construction. Using AutoCAD's icon menu and dialogue box' facilities, a non-expert may graphically select (i) residential configuration; (ii) construction quality level; (iii) geographical location; (iv) square foot area; and finally, (v) add-ons, e.g. porches and decks, basement, heating and cooling equipment, garages and carports etc. in order to determine on-site builder's costs. Subsequent AutoLisp routines facilitate data transfer to a Lotus 1-2-3 spreadsheet where an elemental cost breakdown for the project may be determined. Finally, using Lotus 1-2-3 macros, computed data is transferred back to AutoCAD, where all cost significant items are graphically highlighted.
series	DDSS
last changed	2003/08/07 16:36

_id	9d0c
authors	McVey, G., McCrobie, D., Evans, D., McIlvaine Parsons, D., Templar, J. Konz, S. and Caldwell, B.
year	1992
title	Interactions between Environmental Design and Human Factors Specialists ENVIRONMENTAL DESIGN: Panel
source	Proceedings of the Human Factors Society 36th Annual Meeting 1992 v.1 pp. 575-577
summary	Most of the interactions between human factors specialists, such as ergonomists, and environmental specialists such as facility planners and architects tend to be task specific and do not follow any accepted process. Consequently, the success of such interactions are usually a function of serendipity rather than informed expectation. It is anticipated that by gathering such specialists in an open discussion, relevant issues may be addressed and successful interaction procedures introduced and discussed. Such a forum is desirable for developing an understanding of the differences, educational and operational, between environmental design specialists, and human factors specialists, as well as for exploring the ways their communications can be enhanced. It is anticipated that by sharing their experiences with the attendees, the presenters will identify relevant on-going knowledge transfer activities, and also introduce and discuss practical problem-solving and communication methods that can be used with assurance by the attendees themselves when faced with similar problems in the future. This panel will focus on issues that arrive out of situations where human factors specialists and environmental design specialists are joined together in project development. The specialties represented include architecture, facility planning, environmental psychology, ergonomic research, industrial design and engineering, and equipment and furniture design and manufacturing.
series	other
last changed	2002/07/07 16:01

_id	4202
authors	Brown, Michael E. and Gallimore, Jennie J.
year	1995
title	Visualization of Three-Dimensional Structure During Computer-Aided Design
source	International Journal of Human-Computer Interaction 1995 v.7 n.1 pp. 37-56
summary	The visual image presented to an engineer using a computer-aided design (CAD) system influences design activities such as decision making, problem solving, cognizance of complex relationships, and error correction. Because of the three-dimensional (3-D) nature of the object being created, an important attribute of the CAD visual interface concerns the various methods of presenting depth on the display's two-dimensional (2-D) surface. The objective of this research is to examine the effects of stereopsis on subjects' ability to (a) accurately transfer to, and retrieve from, long-term memory spatial information about 3-D objects; and (b) visualize spatial characteristics in a quick and direct manner. Subjects were instructed to memorize the shape of a 3-D object presented on a stereoscopic CRT during a study period. Following the study period, a series of static trial stimuli were shown. Each trial stimulus was rotated (relative to the original) about the vertical axis in one of six 36° increments between 0° and 180°. In each trial, the subject's task was to determine, as quickly and as accurately as possible, whether the trial object was the same shape as the memorized object or its mirrored image. One of the two cases was always true. To assess the relative merits associated with disparity and interposition, the two depth cues were manipulated in a within-subject manner during the study period and during the trials that followed. Subject response time and error rate were evaluated. Improved performance due to hidden surface is the most convincing experimental finding. Interposition is a powerful cue to object structure and should not be limited to late stages of design. The study also found a significant, albeit limited, effect of stereopsis. Under specific study object conditions, adding disparity to monocular trial objects significantly decreased response time. Response latency was also decreased by adding disparity information to stimuli in the study session.
series	journal paper
last changed	2003/05/15 21:45

_id	sigradi2006_e094d
id	sigradi2006_e094d
authors	Skinner, Martha
year	2006
title	Mapping the City in Movement: The Car as an A/V Apparatus
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 397-400
summary	“…our experience of the city, and hence our response to architecture, is almost exclusively conducted through the medium of the automobile: the car defines our space whether we are driving, being driven or avoiding being driven over. The car has been an integral part of metropolitan life for so long that it has become part of the urban fabric.” Jonathan Bell, Carchitecture. This DVD presents a series of audio/video mappings of the city in movement - an organizational condition which is derived from our car culture, a culture in movement. In these studies the digital audio/video camera, a device which allows us to explicitly record movement and change in time, is used as an investigative tool and as an extension of our bodies in order to observe, capture and measure otherwise imperceptible moments of our moving and fast paced experience of place. The projects are from a seminar/studio entitled A/V Mappings and Notations. This research looks at the merging of moving image and more conventional drawing to create maps which read physical and ephemeral conditions of place in an experiential and analytical manner. The importance of The Car as an A/V Apparatus studies is that they allow us to uncover characteristics of place that are particular to the infrastructure of our car cities and most importantly to the experience of inhabiting the transitory spaces of these cities in movement. The projects which will be presented extend the human body into the city via the car as an audio/video apparatus, an instrument for reading and measuring the city in movement. The documents are choreographed as sections through the city in which the section cut (the line drawn) is the trajectory of driving/drawing. In the making of these full-scale life size drawings, cameras are mounted to the car prior to driving. The location(s) of camera(s) are determined by the specifics of each investigation. What is choreographed is the set up of the car as an audio/video apparatus and of the trajectory of driving. The apparatus itself, the body/car/camera, in its trajectory captures, studies, measures, draws/drives. This as an extension of the human body allows us to detach ourselves from the dominance of our vision and to more objectively discover aspects of place as related to our movement and corporeal experience and otherwise hidden from our perception. In addition and more importantly as body/car/camera, the apparatus captures the city at the scale of driving (corpor/car) a scale which expands our body into the scale of a larger space of great distances, movements, speeds, and durations. The discoveries that these mappings reveal inform us of the potential for more specifically intervening in these cities with proposals which engage these two drastically different yet intricately connected scales. A Cross-Section (version 1) 00:46, (version 2) 00:46 Signals and Maneuvers Car and City 03:15 Gear Shift / Tangent City 02:30 Automoscope 01:30 Mapping a Small City 01:59 Gas Up Mapping: Mapping in Time 03:56 Inter[sur]face 02:30 This is a series of videos/ a paper can also be developed, a sample video is ready to send
keywords	digital video; multidisciplinary; tools and methods; city; mapping
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	3ff5
authors	Abbo, I.A., La Scalea, L., Otero, E. and Castaneda, L.
year	1992
title	Full-Scale Simulations as Tool for Developing Spatial Design Ability
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 7-10
summary	Spatial Design Ability has been defined as the capability to anticipate effects (psychological impressions on potential observers or users) produced by mental manipulation of elements of architectural or urban spaces. This ability, of great importance in choosing the appropriate option during the design process, is not specifically developed in schools of architecture and is partially obtained as a by-product of drawing, designing or architectural criticism. We use our Laboratory as a tool to present spaces to people so that they can evaluate them. By means of a series of exercises, students confront their anticipations with the psychological impressions produced in other people. For this occasion, we present an experience in which students had to propose a space for an exhibition hag in which architectural projects (student thesis) were to be shown. Following the Spatial Design Ability Development Model which we have been using for several years, students first get acquainted with the use of evaluation instruments for psychological impressions as well as with research methodology. In this case, due to the short period available, we reduced research to investigate the effects produced by the manipulation of only 2 independents variables: students manipulated first the form of the roof, walls and interiors elements, secondly, color and texture of those elements. They evaluated spatial quality, character and the other psychological impressions that manipulations produced in people. They used three dimensional scale models 1/10 and 1/1.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
email
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	6208
authors	Abou-Jaoude, Georges
year	1992
title	To Master a Tool
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, p. 15
summary	The tool here is the computer or to be precise, a unit that includes the computer, the peripherals and the software needed to fulfill a task. These tools are getting very sophisticated and user interfaces extremly friendly, therefore it is very easy to become the slave of such electronic tools and reach self satisfaction with strait forward results and attractive images. In order to master and not to become slaves of sophisticated tools, a very solid knowledge of related fields or domains of application becomes necessary. In the case of this seminar, full scale modelling, is a way to understand the relation between a mental model and it's full-scale modelling, it is a way of communicating what is in a designers mind. Computers and design programs can have the same goal, rather than chosing one method or the other let us try to say how important it is today to complement designing with computer with other means and media such as full scale modelling, and what computer modelling and simulation can bring to full scale modelling or other means.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	ce98
authors	Anderson, Lee
year	1992
title	Virtual Graffiti Three-Dimensional Paint Tools for Conceptual Modeling in Upfront
doi	https://doi.org/10.52842/conf.acadia.1992.127
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 127-133
summary	This chapter describes several limitations present in current 3-D programs used for conceptual design and then introduces a new threedimensional paint tool, as implemented in a beta version of Alias Upfront, that attempts to deal with some of those limitations.
series	ACADIA
last changed	2022/06/07 07:54

_id	735a
authors	Anh, Tran Hoai
year	1992
title	FULL-SCALE EXPERIMENT ON KITCHEN FUNCTION IN HANOI
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 19-30
summary	This study is a part of a licentiate thesis on "Functional kitchen for the Vietnamese cooking way"at the Department of Architecture and Development studies, Lund University. The issues it is dealing with are: (1) Inadequacy of kitchen design in the apartment buildings in Hanoi, where the kitchen is often designed as a mere cooking place - other parts of the food making process are not given any attention. (2) Lack of standard dimensional and planning criteria for functional kitchen which can serve as bases for kitchen design. // The thesis aims at finding out indicators on functional spatial requirements for kitchen, which can serve as guide-line for designing functional kitchen for Hanoi. One of the main propositions in the thesis is that functional kitchens for Hanoi should be organised to permit the culinary activities done according to the Vietnamese urban culinary practice. This is based on the concept that the culinary activity is an expression Of culture, thus the practice of preparing meal in the present context of the urban households in Hanoi has an established pattern, method which demand a suitable area and arrangement in the kitchen. This pattern and cooking method should make up the functional requirement for kitchen in Hanoi, and be taken in to account if functional kitchen designing is to be achieved. In the context of the space-limited apartment building of Hanoi, special focus is given to find out indicators on the minimum functional spatial requirements of the kitchen works.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:29

_id	7291
authors	Arvesen, Liv
year	1992
title	Measures and the Unmeasurable
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 11-16
summary	Nowhere do we ever find a similar environment as the one related to the tea ceremony. We may learn from the teamasters as we may learn from our masters of architecture. Directly and indirectly we are influenced by our surroundings which have been proved by research and which we ourselves experience in our daily life. The full scale experiments have been made on this subject. Related to the nervous mind the experiments were concentrated of form expressing safety and peace.
keywords	Full-scale Modeling,Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
doi	https://doi.org/10.52842/conf.acadia.2000.137
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
doi	https://doi.org/10.52842/conf.ecaade.1995.355
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	b602
authors	Bosselmann, P.
year	1992
title	Visual Simulation in Urban Design
source	Institute of Urban and Regional Development, University of California at Berkeley Working Paper No. 587, pp. 1-15
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	9b34
authors	Butterworth, J. (et al.)
year	1992
title	3DM: A three-dimensional modeler using a head-mounted display
source	Proceedings of the 1992 Symposium on Interactive 3D Graphics (Cambridge, Mass., March 29- April 1, 1992.), 135-138
summary	3dm is a three dimensional (3D) surface modeling program that draws techniques of model manipulation from both CAD and drawing programs and applies them to modeling in an intuitive way. 3dm uses a head-mounted display (HMD) to simplify the problem of 3D model manipulation and understanding. A HMD places the user in the modeling space, making three dimensional relationships more understandable. As a result, 3dm is easy to learn how to use and encourages experimentation with model shapes.
series	other
last changed	2003/04/23 15:50

_id	89d9
authors	Cajati, Claudio
year	1992
title	The New Teaching of an Architect: The Rôle of Expert Systems in Technological Culture
doi	https://doi.org/10.52842/conf.ecaade.1992.435
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 435-442
summary	We already have the EEC, that is the European Economic Community. We have to build the CCE, that is the Common Cultural Europe. Architects and building engineers of any european country will be allowed to freely practise in any other country of the EEC. Of course, it is not only matter of coming down of the frontiers, of a greater labour mobility. Not even it will be enough that the university degree courses of the different countries agree to and put into effect the EEC common directives. They need rules and guidelines entering into the merits of practice: rules and guidelines which, rather than a legal and bureaucratic matter, must be the result of a common cultural and technical work, about clear and delimited questions of shared subjects, in which all the community countries be deeply concerned. Analogously, in the very field of research, the project "Human Capital and Mobility" has in view a greater european scientific and technological competitiveness, through an integration of human and material resources of different research centres, such as in shared-cost research projects and in concerted research actions. Such an integration is neither easy nor rapid. The political, social, cultural, technological peculiarities of the countries of the European Community certainly constitute an obstacle for the creation of a supernational cultural and technological pool. of common opportunities. These peculiarities, however, aren't only a restraint for the european community effort of unification and construction of shared goals, constraints, rules, methods, techniques, tools. They mean also a richness, an unrepeatable resourse: they are the result of a historical millenary stratification, which gave rise to urban and architectural contexts, to cultural and technological traditions it would be a serious mistake to waste.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2015_11.166
id	sigradi2015_11.166
authors	Calixto, Victor; Celani, Gabriela
year	2015
title	A literature review for space planning optimization using an evolutionary algorithm approach: 1992-2014
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 662-671.
summary	Space planning in architecture is a field of research in which the process of arranging a set of space elements is the main concern. This paper presents a survey of 31 papers among applications and reviews of space planning method using evolutionary algorithms. The objective of this work was to organize, classify and discuss about twenty-two years of SP based on an evolutionary approach to orient future research in the field.
keywords	Space Planning, Evolutionary algorithms, Generative System
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	e1f9
authors	Carini, A., Apollonio, F. And Tolomellia, A.
year	1992
title	RESEARCH ACTIVITY 1990-92 AT THE L.T.N.-OIKOS BOLOGNA: EUROPAN AND BARRIER-FREE BATHROOMS
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 31-42
summary	During the three year period 1990-1992, the research activity carried out in the Typological Laboratory has been focused on two specific themes: flexibility and typological innovation in dwelling-areas and features of the bathroom for disabled users. These themes reflect two among the chief subjects calling the attention of the Residential Building Committee of the Ministry of Public Works to which - as everybody knows - the Laboratory is subordinated. Both themes have been approached through specific application pro rams which took as reference points, respectively, the Programm of EUROPAN Competitions and the proposals for bringing up to date.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:29

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	4bd2
authors	Carrara, G., Kalay, Y.E. and Novembri, G.
year	1992
title	A Computational Framework for Supporting Creative Architectural Design
source	New York: John Wiley & Sons, 1992. pp. 17-34 : ill. includes Bibliography
summary	Design can be considered a process leading to the definition of a physical form that achieves a certain predefined set of performance criteria. The process comprises three distinct operations: (1) Definition of the desired set of performance criteria (design goals); (2) generation of alternative design solutions; (3) evaluation of the expected performances of alternative design solutions, and comparing them to the predefined criteria. Difficulties arise in performing each one of the three operations, and in combining them into a purposeful unified process. Computational techniques were developed to assist each of the three operations. A comprehensive and successful computational design assistant will have to recognize the limitations of current computational techniques, and incorporate a symbiosis between the machine and the human designer. This symbiosis comprises allocating design tasks between the designer and the computer in a manner that is most appropriate for the task at hand. The task allocation must, therefore, be done dynamically, responding to the changing circumstances of the design process. This report proposes a framework for such a symbiotic partnership, which comprises four major components: (1) User interface and design process control; (2) design goals; (3) evaluators; (4) database
keywords	architecture, knowledge base, systems, design process, control
series	CADline
email
last changed	2003/06/02 14:41

_id	6ef4
authors	Carrara, Gianfranco and Kalay, Yehuda E.
year	1992
title	Multi-Model Representation of Design Knowledge
doi	https://doi.org/10.52842/conf.acadia.1992.077
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 77-88
summary	Explicit representation of design knowledge is needed if scientific methods are to be applied in design research, and if comPuters are to be used in the aid of design education and practice. The representation of knowledge in general, and design knowledge in particular, have been the subject matter of computer science, design methods, and computer- aided design research for quite some time. Several models of design knowledge representation have been developed over the last 30 years, addressing specific aspects of the problem. This paper describes a different approach to design knowledge representation that recognizes the Multi-modal nature of design knowledge. It uses a variety of computational tools to encode different kinds of design knowledge, including the descriptive (objects), the prescriptive (goals) and the operational (methods) kinds. The representation is intended to form a parsimonious, communicable and presentable knowledge-base that can be used as a tool for design research and education as well as for CAAD.
keywords	Design Methods, Design Process, Goals, Knowledge Representation, Semantic Networks
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: