Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2044

Reformat results as: short short into frame detailed detailed into frame

_id	3653
authors	Alshawi, M. and Budeiri, M.J.
year	1993
title	An Integrated approach for 3D simulation of construction sequence
source	The Int. Journal of Construction IT 1(2), pp. 35-46
summary	In order to eliminate design-related problems and to ease planning difficulties, a new integrated approach is required to manage and present design and construction information. This paper examines the feasibility of integrating design and construction scheduling information produced by 'industry standard' software. It describes the structure of a prototype which has been developed to generate a 3D simulation model for the construction sequence by integrating a CAD package with a project planning software. This study aims at establishing an integrated approach to communicate construction planning graphically to users (designers or construction managers) prior to construction in order to enhance the efficiency of the design/construction process.
series	journal paper
last changed	2003/05/15 21:45

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	0ffe
authors	Bhat, R.R., Gauchel, J. and Van Wyk, S.
year	1993
title	Communication in Cooperative Building Design
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 481-493
summary	This paper addresses communication issues, which are crucial in any implementation of distributed design environments. Communication needs are specified and implemented in a prototype based on a modular knowledge-based approach for simulation of a distributed multi-user system. The results of these simulations are reported, which show communication to be scalable as the numbers of applications and the size of the design increases. Finally, the implications of the results on real distributed systems are discussed.
keywords	Building Design, Distributed Design Environments, Cooperative Design, Communication
series	CAAD Futures
last changed	2003/11/21 15:16

_id	4dd6
authors	Bhavnani, S.K., Garrett, J. and Shaw, D.S.
year	1993
title	Leading Indicators of CAD Experience
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 313-334
summary	Current interfaces and help facilities of CAD systems are not designed to respond to a user's performance. To develop such adaptive environments, a better understanding of the indicators of CAD experience is required. This paper discusses the results of studying behavior patterns of different types and levels of CAD users for a specific drawing task. The results show that the type and experience of the CAD user has a clear correlation to the pattern of commands used, the time taken, and the quality of drawing produced. By using the experimental data to train a neural network, the paper demonstrates a connectionist approach for experience assessment. This information, it is proposed, can provide input to an adaptive interface which generates unobtrusive interception to improve the performance of a CAD user. Future experiments to explore the issues of generality and interception are presented.
keywords	CAD user Modeling, Adaptive Interface, Neural Networks
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	4687
authors	Boekholt, J.T.
year	1993
title	Evaluation First Year Design Projects
doi	https://doi.org/10.52842/conf.ecaade.1993.x.u8b
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	During the first year students are taught that it is important to learn to evaluate their projects themselves. Therefore a checklist is introduced and explained over the year which can be used by the students to formulate their criteria, evaluation scales and weighting factors. The main aspects that are evaluated are utility, structural and manufacturing aspects. Only little attention during the first year is given to legal and economical aspects. Main goal is to develop a systematic and integrated approach towards the evaluation of design projects. The evaluation of the student is compared with the judgement of the teacher. Final marks are given by the teacher.
series	eCAADe
last changed	2022/06/07 07:50

_id	0e89
authors	Bradford, J.W., Cheng, N. and Kvan, Thomas
year	1994
title	Virtual Design Studios
doi	https://doi.org/10.52842/conf.ecaade.1994.163
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 163-167
summary	Beginning in 1993, small groups of students of architectural design at different institutions around the world participated in collaborative design projects using a variety of tools, including CAD, Internet and teleconferencing. This programme, known as the "Virtual Design Studio" (VDS), allows students to work collectively with colleagues from different cultures and climates who are thousands of kilometres and in different time zones. Most recently, in February 1994, four institutions in N. America, one in Europe, and one in S E Asia participated in VDS’94. This paper explains the operation of the VDS and explores the future of the VDS as a potential tool for architectural design education. In particular, we review what we have learned in employing computer tools to extend the teaching in design studios into a "virtual" experience.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	6737
authors	Casaus, A., Fargas, J. and Papuzian, P.
year	1993
title	Hybrid Design Environments - A Research Program on Creative Collaboration and Communication
doi	https://doi.org/10.52842/conf.ecaade.1993.x.a8h
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	This paper gives an overview of a research program initiated in the Architectural Design Department of the Escola Tècnica Superior d'Arquitectura de Barcelona on issues of communication and collaboration in computer aided design. The work is centered around emerging design situations which can be attributed directly to the incorporation of new technologies in education and practice. One of these is the "design triangle" composed of a traditional designer, a CAD workstation and a computer literate collaborator acting as the design medium. Another is the "virtual workshop" consisting of design collaboration involving large-scale distributed communications networks. The research program stresses three common characteristics of these situations which it aims to study in parallel in the setting of an design workshop. The first of these is the characteristic of distance, both physical and conceptual, which separates, on the one hand, the traditional designer from the CAD document and, on the other, the participants of a distributed workshop from each other and each others' thinking. The second, is the typically hybrid nature of such situations where computer technology interacts with more traditional techniques and alternative media are combined both at the level of production and in channels and modes of communication. And finally, the third and most significant for the methodology of the research program, is the fact that both the design triangle and the virtual workshop make explicit aspects of design activity, interaction and intentions which remain hidden or are only implicit in traditional designing.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cbe7
authors	Caturano, Umberto and Sanseverino di Marcellinara, Carlo
year	1993
title	Solid Modelling by Low-cost Hardware and Software: The Crystal Palace's Node
doi	https://doi.org/10.52842/conf.ecaade.1993.x.m6j
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	This paper describes the approach to the solid modelling by low-cost hardware and software, developed by a workgroup composed by staff members, young researchers and students of the University of Naples - Faculty of Architecture. The work was born in need of exposing to the students the project of Crystal Palace, designed in 1850 by J. Paxton, and used in the Italian universities as an example of first prefabrication by components and the organization of the yard. Using commercial programs and the students' computers, we had done a 3D model of the Crystal Palace's structural node, making an interesting experience based on the cooperation between university structures and private resources.
series	eCAADe
last changed	2022/06/07 07:50

_id	9937
authors	Chandansingh, R.A., and Vos, Ch.J.
year	1993
title	Modelling effects of cad on concrete construction using production graphs
source	The Int. Journal of Construction IT 1(4), pp. 39-50
summary	Quantitative statements on effects of CAD systems are needed to manage their use in concrete construction, but are hard to make. This paper describes an approach to model the effects of CAD systems on concrete construction. The approach is based on the concept of 'the market value of information commodities', and uses graph theory to build a formal model of the construction process. The formal model, so-called production graph, allows for investigation and quantification of the effects of CAD systems, which depend on their so-called value adding dimensions. An example of application of the approach is provided. Experiences with this approach are very good. General patterns between the value adding dimensions of CAD systems and their effects on production graphs must be determined to develop a descriptive and predictive model. Case-studies are being done to identify these general patterns.
series	journal paper
last changed	2003/05/15 21:45

_id	0b24
authors	Chilton, J.C., Wester, T. and Yu, J.
year	1993
title	Exploring Structural Morphology Using CAD
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d1k
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Often in the design process the student's imagination is restricted by their inability to visualise, model or accurately sketch ideas for innovative structural systems. By using CAD as a design tool it is possible to explore the morphology of complex structures and to be able to produce perspective drawings of them with relative ease. Within AutoCAD there is a small library of standard three-dimensional objects and surfaces that can be called upon to generate more complex forms. However, to further facilitate the architectural design process, an extended library of innovative structural forms would allow the professional designer, or student, greater design freedom and any increase in the palette of structural forms available should stimulate creativity. As practical examples, the paper describes how students have been encouraged to experiment with the use of structures which can only be physically modelled with difficulty and which are also difficult to represent on the two- dimensional surface of the drawing board unless the geometry has previously been determined by the methods described. These are (i) Reciprocal Frame three-dimensional beam grillage structures and (ii) plate domes created from lattice structures by point-to- plane duality. The problem, of representation of these structures has been overcome, in the first case, by generating AutoLISP procedures to draw the complex three-dimensional geometrical form automatically in AutoCAD and, in the second case, by the development of the computer program CADual.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	08fc
authors	Darken, R.P. and Sibert, J.L.
year	1993
title	A toolset for navigation in virtual environments
source	Proceedings of the ACM User Interface Software and Technology, pp.157-165
summary	Maintaining knowledge of current position and orientation is frequently a problem for people in virtual environments. In this paper we present a toolset of techniques based on principles of navigation derived from real world analogs. We include a discussion of human and avian navigation behaviors and show how knowledge about them were used to design our tools. We also summarize an informal study we performed to determine how our tools influenced the subjects' navigation behavior. We conclude that principles extracted from real world navigation aids such as maps can be seen to apply in virtual environments.
series	other
last changed	2003/04/23 15:14

_id	ddss9209
id	ddss9209
authors	De Gelder, J.T. and Lucardie, G.L.
year	1993
title	Knowledge and data modelling in cad/cam applications
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Modelling knowledge and data in CAD/CAM applications is complex because different goals and contexts have to be taken into account. This complexity makes particular demands upon representation formalisms. Today many modelling tools are based on record structures. By analyzing the requirements for a product model of a portal structure in steel, this paper shows that in many situations record structures are not well suited as a representation formalism for storing knowledge and data in CAD/CAM applications. This is illustrated by performing a knowledge-level analysis of the knowledge and data generated in the design and manufacturing process of a portal structure in steel.
series	DDSS
last changed	2003/08/07 16:36

_id	e20d
authors	Decker, J.
year	1993
title	Simulation methodologies for observing large-scale urban structures
source	Landscape and Urban Planning 26, pp. 231-250
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	2a5e
authors	Does, J. van der and Giró, H.
year	1997
title	Design communication and image processing
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	In the proceedings of the first EAEA conference, 1993, I mentioned our first study focused on refining endoscopic video images of a detailed architectural model and drawings. The study was based on work with 900 subjects, of which 200 were professional architects. It has led to a number of technical improvements. In the second study we compared computer-aided design techniques with two techniques from the first study, endoscopic video recordings and coloured and black and white elevations and perspective drawings. Four different groups of 50 subjects took part in this research. We found that computer images are invariably judged to be of moderate value, while drawings yielded consistently high scores. Endoscopic video recordings of the scale model received high scores as far as emotional response is concerned, and moderate scores when the participants were questioned on the actual content of the recordings.
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	ddss9207
id	ddss9207
authors	Gauchel, J., Hovestadt, L., van Wyk, S. and Bhat, R.R.
year	1993
title	Modular building models
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The development and implementation of a modular building model appropriate for computer aided design is described. The limitations of a unified building model with regard to concurrence and complexity in design is discussed. Current research suggests that to model real-world complexity, one must trade centralized control for autonomy. In this paper we develop a modular approach to building modelling that is based on object-oriented autonomy and makes it possible to define these models in a distributed concurrent manner. Such a modular and autonomous implementation brings inherent uncertainty and conflict which cannot be determined a priori.
series	DDSS
last changed	2003/08/07 16:36

_id	e994
id	e994
authors	Gero, J. S.
year	1993
title	The role of visual emergence in collaborative design
source	Computational Support for Distributed Collaborative Design, Key Centre of Design Computing, University of Sydney, pp. 103-115
summary	There are two fundamental approaches to the use of computers to support collaborative design: (i) to use the computer as a device which increases the efficiency of what designers could do previously, and (ii) to use the computer as an active device which allows designers to do what they could not readily do previously. // This paper is concerned with the latter approach by introducing the concept of visual or graphical emergence as one form of collaboration at a distance that can not readily be carried out without the aid of the computer.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:21

_id	1766
id	1766
authors	Gero, J. S.
year	1993
title	New knowledge-based CAD models of design
source	K. Mathur, M. Betts and K. W. Tham (eds), Management of Information Technology for Construction, World Scientific, Singapore, pp. 199-208
summary	Knowledge-based systems utilise concepts from artificial intelligence. They are the bases of new models of design which have the potential to extend the utility of computers in design. This paper briefly reviews current research support new knowledge-based CAd-models if design before describing and elaborating two such models. One is case-based design and the other is creative design.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:27

_id	ddss9211
id	ddss9211
authors	Gilleard, J. and Olatidoye, O.
year	1993
title	Graphical interfacing to a conceptual model for estimating the cost of residential construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper presents a method for determining elemental square foot costs and cost significance for residential construction. Using AutoCAD's icon menu and dialogue box' facilities, a non-expert may graphically select (i) residential configuration; (ii) construction quality level; (iii) geographical location; (iv) square foot area; and finally, (v) add-ons, e.g. porches and decks, basement, heating and cooling equipment, garages and carports etc. in order to determine on-site builder's costs. Subsequent AutoLisp routines facilitate data transfer to a Lotus 1-2-3 spreadsheet where an elemental cost breakdown for the project may be determined. Finally, using Lotus 1-2-3 macros, computed data is transferred back to AutoCAD, where all cost significant items are graphically highlighted.
series	DDSS
last changed	2003/08/07 16:36

_id	412e
authors	Gross, M.D., Do, E. and McCall, R.J.
year	1997
title	Collaboration and Coordination in Architectural Design: approaches to computer mediated team work
source	TeamCAD 97, 17-23
summary	In 1993 and 1994, instructors and students of architecture at several universities around the world* collaborated briefly on two "virtual design studio" projects. Using off-the-shelf technology of the time-email, CU-See-Me internet video, international conference calls, and exchange of CAD drawings, images, and Quicktime animations-this ambitious project explored the possibility of bringing together diverse members of an international design team together to collaborate on a short term (two week) project. Central to the "Virtual Design Studio" was a 'digital pinup board', an area where participating designers could post and view drawings and textual comments; video links and email exchange provided the media for direct communication media about designs. A report on the project [21] makes clear that the process was not without technical difficulties: a significant amount of communication concerned scheduling and coordinating file formats; disappointingly little was devoted to discussions of design issues. Although it's clear that many of the minor technical problems that inevitably plague a forward-looking effort like the Virtual Design Studio will be solved in the near term, the project also reveals the need for research on software and design practices to make computer mediated design collaboration realize its attractive promise.
series	journal paper
email
last changed	2003/04/23 15:50

_id	c044
authors	Heisserman, J. and Woodbury, R.
year	1993
title	Generating languages of solid models
source	Proceedings of Second ACM/IEEE Symposium on Solid Modeling and Applications, pp. 103-112
summary	This paper explores the automatic generation of solid models based on a grammatical paradigm. It presents a formalism, boundary solid grammars, for this purpose. Boundary solid grammars allow complex geometric conditions and operations to be expressed using a logical reasoning mechanism, the construction of powerful rules, and the description of grammars for generation of solid models that is appropriate for a variety of design domains. The formalism is well suited to computer implementation, and we demonstrate a prototype interpreter.
series	other
last changed	2003/04/23 15:50

For more results click below: