Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 17652

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2020_257
id	caadria2020_257
authors	Lu, Yao, Birol, Eda Begum, Johnson, Colby, Hernandez, Christopher and Sabin, Jenny
year	2020
title	A Method for Load-responsive Inhomogeneity and Anisotropy in 3D Lattice Generation Based on Ellipsoid Packing
doi	https://doi.org/10.52842/conf.caadria.2020.1.395
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 395-404
summary	3D lattice structures are gaining widespread application in multiple design fields. While the number of projects that utilize load-responsive inhomogeneous and anisotropic 3D lattices in design applications increase, accessible and effective algorithmic generation methodologies remain lacking. This paper addresses this gap by introducing a novel computational method for controlled load-responsive inhomogeneity and anisotropy in 3D lattice generation. The presented methods employ a responsive Ellipsoid Packing algorithm informed by the global tensor field of the packing geometry, followed by a Kissing Ellipsoids algorithm to generate the lattice. Load specific anisotropy and inhomogeneity in the ellipsoid packing process is achieved in response to the magnitude and directionality values of the global tensor field and specialized responsive lattices are easily generated. The proposed Ellipsoid Packing workflow is compared to various common lattice generation algorithms. Results show improvement in mechanical performance.
keywords	3D lattice; ellipsoid packing; bio-inspired; algorithmic design; ceramic brick
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia22pr_166
id	acadia22pr_166
authors	Lu, Yao; Seyedahmadian, Alireza; Chhadeh, Philipp Amir; Cregan, Matthew; Bolhassani, Mohammad; Schneider, Jens; Yost, Joseph Robert; Brennan, Gareth; Akbarzadeh, Masoud
year	2022
title	Tortuca: An Ultra-Thin Funicular Hollow Glass Bridge
source	ACADIA 2022: Hybrids and Haecceities [Projects Catalog of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-7-4]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 166-171.
summary	Designed with Polyhedral Graphic Statics (PGS), a geometry-based structural form-finding method, Tortuca presents an efficient and innovative structural system constructed by the dry assembly of thirteen hollow glass units (HGU). It also proposes a new language for glass that is carefully treated, structurally informed, fabrication-aware, and environmentally responsible.
series	ACADIA
type	project
email
last changed	2024/02/06 14:06

_id	caadria2020_164
id	caadria2020_164
authors	Lu, Yi-Heng, Wang, Shih-Yuan, Sheng, Yu-Ting, Lin, Che-Wei, Pang, Yu-Hsuan and Hung, Wei-Tse
year	2020
title	Transient Materialization â€“ Robotic Metal Curving
doi	https://doi.org/10.52842/conf.caadria.2020.2.423
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 423-432
summary	This paper introduces the notion of transient materialization to investigate a novel approach of robotic fabrication. Transient materialization explores a new logic of materialization that takes the advantage of differentiated material states to generate form at a particular moment through computation and fabrication technologies. Specifically, this design research explains a unique design and fabrication process, opening up a new method of materializing architectural form that emerges from the interweaving of data, the material capacity (plastic deformation), timing, and machine capacity. Hence, to examine this research direction, this paper conducts an experimental project, Robotic Metal Curving, through hands-on material experiments, as well as the development of algorithms, robot motion, and prototyping machines. This experiment utilizes an induction heating technique in cooperation with a six-axis industrial robotic arm and fabrication equipment used to shape each metal rod into a three-dimensional curve at a transient moment. In addition, the project focuses not only on developing a robotic metal curving system but also apply this technique in large scale by fabricating a wire-frame structure.
keywords	Robotic Fabrication; Digital Fabrication; Metal Bending
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2021_196
id	caadria2021_196
authors	Lu, Yueheng, Tian, Runjia, Li, Ao, Wang, Xiaoshi and Jose Luis, Garcia del Castillo Lopez
year	2021
title	CubiGraph5K - Organizational Graph Generation for Structured Architectural Floor Plan Dataset
doi	https://doi.org/10.52842/conf.caadria.2021.1.081
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 81-90
summary	In this paper, a novel synthetic workflow is presented for procedural generation of room relation graphs of floor plans from structured architectural datasets. Different from classical floor plan generation models, which are based on strong heuristics or low-level pixel operations, our method relies on parsing vectorized floor plans to generate their intended organizational graph for further graph-based deep learning. This research work presents the schema for the organizational graphs, describes the generation algorithms, and analyzes its time/space complexity. As a demonstration, a new dataset called CubiGraph5K is presented. This dataset is a collection of graph representations generated by the proposed algorithms, using the floor plans in the popular CubiCasa5K dataset as inputs. The aim of this contribution is to provide a matching dataset that could be used to train neural networks on enhanced floor plan parsing, analysis and generation in future research.
keywords	Graph Theory; Algorithm; Architecture Design Dataset; Organizational Graph
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2016_539
id	caadria2016_539
authors	Lublasser, E.; J. Braumann, D. Goldbach and S. Brell-Cokcan
year	2016
title	Robotic Forming: Rapidly Generating 3D Forms and Structures through Incremental Forming
doi	https://doi.org/10.52842/conf.caadria.2016.539
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 539-548
summary	The past years have seen significant developments in the area of robotic design interfaces. Building upon visual programming environments, these interfaces now allow the creative industry to de- fine even complex fabrication processes in an easy, accessible way, while providing instant, production-immanent feedback. However, while these software tools greatly speed up the programming of robot- ic arms, many processes are still inherently slow: Subtractive process- es need to remove a large amount of material with comparably small tools, while additive processes are limited by the speed of the extruder and the properties of the extruded material. In this research we present a new method for incrementally shaping transparent polymer materi- als with a robotic arm, without requiring heat or dies for deep- drawing, thus allowing us to rapidly fabricate individual panels within a minimum of time.
keywords	Incremental forming; robotic fabrication; visual programming
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ddssup9615
id	ddssup9615
authors	Lucardie, L., de Gelder, J. and Duursma, C.
year	1996
title	Matching the Knowledge Needs of Trade and Industry: Advanced and Operational Knowledge Based Systems
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Complex tasks that are being performed in trade and industry such as diagnosis, engineering and planning, increasingly require rapid and easy access to large amounts of complicated knowledge. To cope with these demands on trade and industry, advanced automated support for managing knowledge seems to be needed. Knowledge based systems are claimed to match these needs. However, to deal with the vast volume and complexity of knowledge through knowledge based systems, preconditions at three computer systems levels should be fulfilled. At the first level, called the knowledge level, the development of knowledge based systems requires a well-elaborated theory of the nature of knowledge that helps to get a clear and consistent definition of knowledge. By providing guidelines for selecting and developing methodologies and for organising the mathematical functions underlying knowledge representation formalisms, such a definition significantly advances the process of knowledge engineering. Here, we present the theory of functional object-types as a theory of the nature of knowledge. At the second level, called the symbol level, the representation formalisms used must be compatible with the chosen theory of the nature of knowledge. The representation formalisms also have to be interpretable as propositions representing knowledge, so that their knowledge level import can be assessed. Furthermore, knowledge representation formalisms have to play a causal role in the intelligent behaviour of the knowledge based system. At the third level, called the systems level, a knowledge based system should be equipped with facilities that enable an effective management of the representation formalisms used. Yet other system facilities are needed to allow the knowledge base to communicate with existing computer systems used in the daily practice of trade and industry, for instance Database Management Systems, Geographical Information Systems and Computer Aided Design Systems. It should be taken into account that these systems may run in different networks and on different operating systems. A real-world knowledge based system that operates in the field of soil contamination exemplifies the development of an advanced and operational knowledge-based system that complies with the preconditions at each computer systems level.
series	DDSS
last changed	2003/08/07 16:36

_id	8573
authors	Lucardie, L., De Gelder, J. and Huijsing, A.
year	1995
title	The Advanced Knowledge Transfer System
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 163-171
summary	The joint application of decision tables and Prolog seems to meet all the necessary requirements to be met by a language or modelling knowledge. Despite the high complementarity of decision tables and Prolog, it appears that they still yield a language with certain drawbacks. The Advanced Knowledge Transfer System (AKTS) has been developed to take advantage of this complementarity and simultaneously eliminate these drawbacks. To show the capabilities of AKT three knowledge-based systems in the building and construction sector are described which recently have been developed using AKTS.
keywords	Knowledge-Based Systems, Modelling Language, Decision Tables, Prolog
series	CAAD Futures
last changed	1999/08/03 17:16

_id	ddss9463
id	ddss9463
authors	Lucardie, Larry
year	1994
title	A Functional Framework For Conceptual Modelling
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	A conceptual model is not only indispensable for the design and implementation of knowledge based systems, but also for their validation, modification, maintenance and enhancement. Experience indicates, however, that in many cases reality is not well reflected in a full-fledged conceptual model. What is systematically lacking in the prevailing conceptualization methods is a well-developed theory of knowledge that underlies conceptualization methods: a theory that precedes the process of forming meaningful classifications and that precedes the specification of a conceptual model. To date, conceptualization methods are based on the probabilistic assumption that, in essence, all conditions necessary for creating a classification, are provided initially and can easily be revealed by utilizing mathematical measures of similarity. Another frequently occurring prototypical assumption is that for creating a classification, necessary conditions are sufficient. Furthermore, it is assumed that the categories of conditions are a priori fixed and unconditional. That conceptualizing takes place without any explicit background knowledge about goals of classifications and without contextual influences and that categorizations have an unconditional status are not viewed as problems. In contrast to these approaches, the functional view states that relevant descriptive attributes are not necessarily a priori given but should be acquired through knowledge about goals of classifications and about contexts. It is also asserted that an explicit concern for necessary conditions will not suffice for capturing the dynamics of reality. Furthermore, the functional view puts forward that a goal- and context-oriented strategy leads to the reconstruction of new attributes and categorizations with a dynamic status. The aim of this paper is to discuss the theoretic and practical merits of the functional view compared to the probabilistic and prototype approaches. Conceptual models developed in the Computer Integrated Manufacturing-Project will serve as illustrations for the main ideas.
series	DDSS
email
last changed	2003/08/07 16:36

_id	eee5
authors	Luczak, H., Beitz, W., Springer, J. and Langner, T.
year	1991
title	Frictions and Frustrations in Creative-Informatory Work with Computer Aided Design -- CAD-Systems -- Congress I: Work with Terminals: HEALTH ASPECTS: WORKLOAD, STRESS AND STRAIN AND IRREGULAR WORKING HOURS; Causes and Measures of Stress
source	Proceedings of the Fourth International Conference on Human-Computer Interaction 1991 v.1 pp. 175-179
summary	The effects of computer aided design work on the design process are analysed by field experiments. The study focuses on the influence of 3 different design tasks (standard tasks) and 11 CAD-systems (2D and 3D), taking into account the performance and strain measurements of 43 subjects (15 design engineers, 8 technicians, 17 draughtsmen, 3 trainees). The 3 standard tasks differ in performance measurements, especially in time spent on task, quantity of generated elements, not in the quality of the solution. The kind of CAD-system influences the time spent on task as well as the design performance, with significant differences of up to 100%. The same tendency can be diagnosed in a comparison of 2D and 3D systems. During the use of different functions of the CAD-system, strain effects are identified by cross-correlation with continuously measured physiological parameters, even with CAD-functions which should reduce stresses of routine work. Deficits and complications in the handling of CAD-systems increase with the complexity of the system and thus cause an antinome effect on performance and strain of its operators: creativity is reduced by frictions and frustrations in system handling even if operators are highly trained.
keywords	Stressor Analysis; Performance Measurement; Field-Experiment; Design Process
series	other
last changed	2002/07/07 16:01

_id	sigradi2004_036
id	sigradi2004_036
authors	Lucía Gómez; Lola Vico
year	2004
title	Infografia aplicada al patrimonio cultural: El caso del ninfeo de campetti (Veio) [Infographics Applied to Cultural Heritage: The Case of "Ninfeo de Campetti (Veio)"]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper presents the results of an in-depth study and virtual reconstruction of the Nymphaeum of Veio, in the archaeological zone of Villa Campetti, Rome. The study consisted in analysing the vestiges and enlightening the findings with a thorough literature review about the Nymphaeum itself as well as about contemporary and similar constructions. A digital model was then elaborated, as an attempt to recreate the Nymphaeum of Veio as it may have stood during the Roman period. The Nymphaeum had been decorated with roman frescoes of the III style, now highly deteriorated. The virtual reconstruction intends to reproduce the harmony of volumes, structure and paintings of the chamber. It also helps to better understand its configuration. This kind of reconstruction, based on historical and architectural research, offers great possibilities in the world or architectonic and archaeological heritage, allows the recovery and analysis of spaces otherwise lost forever.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia03_034
id	acadia03_034
authors	Luhan, G.A., Bhavsar, S. and Walcott, B.L.
year	2003
title	Deep-Time ProbeInvestigations in Light Architecture
doi	https://doi.org/10.52842/conf.acadia.2003.258
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 258-266
summary	This paper presentation presents an interdisciplinary research project conducted by a design team comprised of faculty from the Colleges of Architecture, Engineering, and Astrophysics. The title of the project, Deep-Time Probe, Investigations in Light-Architecture, explores the use of an optically active-SETI experiment that centers on the thematic of time, vision, and movement through space. The realm of architecture was the digital glue that united the varied disciplines. The core of the project is broken down into three intrinsically linked components—data representation—collection, storage, and modulation; the Project Mission Wall; and the resultant Light Architecture or Deep-Time Probe. A small team of architecture students under the direction of one architecture faculty member designed the Mission Wall while the Robotics Department provided CNC machinery to digitally mill and fabricate its components. This same team assembled the 40’x60’x15’ structure in one day. The site of the launch created an adequate interface for the public art structure at the scale of an urban park. The scale of the Mission Wall addressed a variety of places, paces, and scales that mediated between the laser, the context of the surrounding plaza, and pedestrian and vehicular circulation, all while concealing the laser from direct view. The Mission Wall served three functions. It provided a housing for the Deep-Time Probe laser. It created windows and scaffolding for lighting. Moreover, it established a series of “View Corridors” that provided the onlooker with multiple vantage points and thus multiple-readings of information as architecture. Nearly fifty “Time Probe Reporters” gathered information through oral interviews. In addition to messages linked to the interviews, the Deep-Time Probe contained verbal and graphic information, images depicting the design and fabrication processes. At the time of the launch, the design team digitized, specially formatted, converted, and modulated the data into a special high-powered laser that was “launched” into space. An advanced civilization in the universe could theoretically receive and decode this information. The Deep-Time Probe project visualized the strengths of each profession, fostered the creative aspects of each team member, and resulted in a unique and dynamic experience. The deep time probe is right now passing through the Oort Cloud, the debris left over from the formation of our Sun and planets, present as a halo surrounding our solar system . . . a distance of nearly 1.5 trillion miles.
keywords	Interdisciplinary Design Research, Information Visualization, and Fabrication
series	ACADIA
email
last changed	2022/06/07 07:59

_id	acadia03_060
id	acadia03_060
authors	Luhan, Greg A. (et al.)
year	2003
title	Virtual Raves in Synthetic LandscapesHybrid Rave Space
doi	https://doi.org/10.52842/conf.acadia.2003.x.f5t
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, p. 432
summary	Project Description: The typology of public event spaces has transformed substantially over centuries. Ranges of spatial configurations have been developed with numerous instances and adaptations; many have occurred in our own century as the information needs of the modern society evolved. Bernard Tschumi denotes these phenomena as architectural urbanism where city-generators, functions, and programs combine and intersect in spaces of endless cross programming. Today, derelict industrial spaces [terrain vagues] have become social places that accommodate public activities. New technologies, particularly those associated with electronic media have radically influenced the program and typology of these event-spaces. Yet, in spite of social, technological, and material changes, the essence of the event-structure has not changed, it remains a place of interaction.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	acadia03_016
id	acadia03_016
authors	Luhan, Gregory A.
year	2003
title	Digital Curricula: Effective Integration of Digital Courses. Stitched-spaces and Digital Permutations
doi	https://doi.org/10.52842/conf.acadia.2003.128
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 128-129
summary	If, “the purpose of art is to awaken reality” as Paul Klee writes, what then, is the generative purpose of the digital as it relates to architecture? By uniting the traditional ways of knowing with the more contemporary and technologically advanced ways of knowing, the architect then would be able to develop the capacity to visualize and to understand unseen spatial relationships and exploit their latent characteristics. The computer consequently allows a direct synthesis to occur between the original idea and its formal application, in a sense providing new questions to old answers.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	acadia06_000
id	acadia06_000
authors	Luhan, Gregory A., Anzalone, P., Cabrinha, M., Clarke, C. (eds.)
year	2006
title	Synthetic Landscapes
doi	https://doi.org/10.52842/conf.acadia.2006
source	Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture, Louisville, KY USA, 12-15 October 2006/ ISBN 0-9789463-0-8, Library of Congress Control Number 2006934211
series	ACADIA
email
last changed	2022/06/07 07:49

_id	acadia05_212
id	acadia05_212
authors	Luhan, Gregory A.
year	2005
title	Modern Translations, Contemporary Methods: DL-1_Resonance House®
doi	https://doi.org/10.52842/conf.acadia.2005.212
source	Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 212-225
summary	As the first design-build-fabricate-assemble experiment at our school, the intent of the studio was to design a framework from which to examine a “lived space” through digital-to-digital processes. Moving from digital models and physical stereo lithographic models to hand-fabrication and digital assembly allowed the students to move from creation to completion. As part of our holistic design process, the studio fabricated almost all components for the project. These elements include the wood flooring, the copper and wood skins, the building’s structural panels, and the two-story light vortex. This single-family, in-fill house is located within an historic downtown neighborhood and is subject to historic district zoning regulations, design guidelines, and Board of Architecture Review approvals. The project is analogous to design challenges presenting themselves in historic districts throughout the United States including the Savannah, Georgia site for the 2005 ACADIA Conference. The scale of the project relates well to the horizontal nature of this context and after a formal, televised review process with the local Board of Architecture Review, the project represents a dynamic, yet sympathetic architectural dialogue with the surrounding buildings. The project develops simultaneously from the exterior and interior resulting in two courtyards that mediate the urban “front door” and the private “terrace.” The students designed these areas through a series of two-dimensional axonometric drawings, three-dimensional physical and digital models, and four-dimensional time-based animations. The building massing separates into two core elements: gabled copper volume and wood screen volume. These elements maintain their conceptual purity by using the same types of modulations on their skins. The copper form with its deep-cut reveals and proportionally placed light scoring patterns reflects the horizontal datum lines of the floor, sill, threshold, and ceiling. In contrast, the wood volume reflects these same lines as applied “shadow screens” which create depths that seamlessly tie together the side, rear, and front facades.The hinge point of the house is the light vortex. Designed in Rhino, translated in Catia, fabricated out of aluminum, and clad in stainless steel, this two-story sculptural element will literally wrap light around its surfaces. Like a sunflower, the light vortex, with its angel hair stainless steel finish, responds to the incremental differentiation of light throughout the day. Photosensitive floor-mounted lights designed to augment the volume of natural light will provide a continuous light rendition on the sculpture. The project, scheduled for completion at the end of the 2005 summer session, is at the time of this submission about 60% complete.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	sigradi2005_097
id	sigradi2005_097
authors	Luhan, Gregory A.
year	2005
title	At Full-Scale \| From Installation to Inhabitation
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 97-102
summary	In 1999, the University of Kentucky (then the College of Architecture, now the College of Design-School of Architecture) established a Digital Design Studio to combine the strong tradition of handcrafting in the existing design program with those technologically sophisticated tools shaping the profession for the 21st century. Over a six-year period, this all-digital design studio has developed from a pedagogical model for developing new different ways of seeing and making architecture to a proof-of-concept real-world experience to coalesce state-of-the-art visualization techniques with current expectations of practice. Creating dynamic links between students, industry, and the profession has enabled the School of Architecture to provide leadership for practicing architects, to create an effective dialogue between industrial and design professionals, and to incorporate successfully leading-edge design pedagogy with the more technological applications that will shape the future of architecture practice. The materials presented here reflect a sequence of comprehensive digital projects produced under my direction from 1999 through 2005.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2005_133
id	sigradi2005_133
authors	Luhan, Gregory A.
year	2005
title	From art to part \| DL-1_Resonance house®
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 133-138
summary	Moving from digital models and physical stereo lithographic models to hand-fabrication and digital assembly allowed the students to move from creation to completion. As part of our holistic design process, the studio fabricated almost all components for the project. These elements include the wood flooring and cantilevered staircase, the copper and wood skins, the building’s structural panels, and the two-story light vortex. This project—a single-family, in-fill house located within an historic downtown neighborhood—is subject to historic district zoning regulations, design guidelines, and Board of Architecture Review approvals. The students designed these areas through a series of two-dimensional plans and axonometric drawings, three-dimensional physical and digital models, and four-dimensional time-based animations. The building massing separates into two core elements: a gabled copper volume and a wood screen volume. The hinge point of the house is the light vortex. Photosensitive floor-mounted lights designed to augment the volume of natural light will provide a continuous light rendition on the sculpture. The project is scheduled for completion in October 2005.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia06_064
id	acadia06_064
authors	Luhan, Gregory A.
year	2006
title	Synthetic Making
doi	https://doi.org/10.52842/conf.acadia.2006.064
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 64-67
summary	Various approaches of virtual and physical modeling have led to a synthetic form of making that is plastic and scalable in nature. This shift from traditional forms of representing and generating architecture now offers a better possibility of full-scale construction and fabrication processes and links transparently to industry. Architects are beginning to dynamically inform the visioning processes of assemblies and design through a range of precise subassemblies. Further to this end, the synthetic techniques and materials are opening up avenues for designers to investigate a range of fibers and fabrics that radically transform light and color renditions, and texture. Investigations in the realm of traditional materials such as stone, wood, and concrete continue to evolve, as do their associated methods of making. As a result of synthetic technologies, architects today have the possibility to work along side industry engineers and professionals to design castings, moldings, patterns, and tools that challenge not only the architectural work of art, but industrial and product design as well. This cultural shift from physical space to virtual space back to physical space and the combination of hand-, digital-, and robotic-making offers a unique juxtaposition of the built artifact to its manufacturing that challenges both spatial conventions and also the levels of precision and tolerance by which buildings are assembled. Traditional forms of documentation for example result typically in discrepancies between the drawn and the actualized which are now challenged by the level of precision and tolerance at the virtual level. It is within this context that leading-edge architects and designers operate today. Yet, how the profession and the academy respond to these opportunities remains an open line of inquiry and addressing these concerns opens up the rich potential enabled through synthetic making.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	sigradi2013_41
id	sigradi2013_41
authors	Luhan, Gregory A.; Robert Gregory
year	2013
title	Across Disciplines: Triggering Frame Awareness in Design Education
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 619 - 623
summary	Tacit knowledge is paradoxical: something we know yet don't know we know, knowledge we sense but can't articulate. In Polanyi’s definition of tacit knowledge, “we know more than we can say" (1966/2009; Scott, 1985; Gelwick, 1977). It's important to see that tacit knowledge is part of a sequence; mental structures, in awareness when first learned, eventually become tacit, operating thenceforth as unquestioned assumptions. These tacit structures pose a problem for professional education in disciplines that encourage creativity. This paper examines the design and re-design of an interdisciplinary course intended to help make these tacit structures visible, to trigger frame awareness.
keywords	Tacit knowledge; Design thinking; Sustainability; Systems thinking; Frame reflection
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	f109
authors	Luis Fernando Borrero
year	2001
title	Deliver E room : a new physical space for the residential units to come
source	University of Washington, Design Machine Group
summary	The need to allocate vendors of the 13th century castles gave origin to a large hall where all could gather,work and sleep.The need of ice boxes to be constantly replenished in the early 20th century gave origin to the ice/service entrance in many houses.In the 1950 ’s the milkman model brought also the milk- box,a unit to be installed or built into customer’s homes. Once again,deliveries will influence the architecture of the households,fueled this time by the e-commerce economy. Soon, a new appliance that will enable the unattended delivery of physical goods is going to be part of future households,and architects will have to plan ahead in order to accommodate this necessity of the Internet world. The space for this appliance, the deliver Eroom,will have to be accessible from the interior and exterior of the house, allow enough capacity for the appliance that must accommodate most if not all deliveries,and access to it will most probably be controlled through the Net.
series	thesis:MSc
more	http://dmg.caup.washington.edu/xmlSiteEngine/browsers/stylin/publications.html
last changed	2004/06/02 19:12

For more results click below: