Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1462

Reformat results as: short short into frame detailed detailed into frame

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
doi	https://doi.org/10.52842/conf.acadia.1994.039
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	241b
authors	Anderson, Lee
year	1994
title	Film Theory and Architectural Design
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 219-227
doi	https://doi.org/10.52842/conf.acadia.1994.219
summary	This paper describes a 10 week, 3rd year architectural design studio, taught by the author, that explored the use of film and video techniques in the design process. The exploration was of (1) the potential of recently available personal computer software and hardware for image and video capture, manipulation and recording, and (2) the potential for application of video, informed by film theory, in the early stages of architectural design.
series	ACADIA
last changed	2022/06/07 07:54

_id	ce09
authors	Carpenter, L.
year	1994
title	The A-Buffer, an Antialiased Hidden Surface Method
source	Proceedings of SIGGRAPH 94: Computer Graphics 18 no. 3: 103-108
summary	The A-buffer (anti-aliased, area-averaged, accumulation buffer) is a general hidden surface mechanism suited to medium scale virtual memory computers. It resolves visibility among an arbitrary collection of opaque, transparent, and intersecting objects. Using an easy to compute Fourier window (box filter), it increases the effective image resolution many times over the Z-buffer, with a moderate increase in cost. The A-buffer is incorporated into the REYES 3-D rendering system at Lucasfilm and was used successfully in the "Genesis Demo" sequence in Star Trek II.
series	other
last changed	2003/04/23 15:50

_id	7d6c
authors	Chapin, William L., Lacey, T. and Leifer, Larry
year	1994
title	DesignSpace: A Manual Interaction Environment for Computer Aided Design DEMONSTRATIONS: Virtual Reality Multimedia
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp. 33-34
summary	DesignSpace is a computer-aided-design (CAD) system that facilitates dexterous manipulation of mechanical design representations. The system consists of an interactive simulation programmed with a seamless extended model of the designer's physical environment and driven with continuous instrumentation of the designer's physical actions. The simulation displays consistent visual and aural images of the virtual environment without occluding the designer's sensation of the physical surroundings. Developed at Stanford University's Center for Design Research (CDR), DesignSpace serves as an experimental testbed for design theory and methodology research. DesignSpace includes significant contributions from recent CDR development projects: TalkingGlove, CutPlane, VirtualHand, TeleSign, and VirtualGrasp. The current DesignSpace prototype provides modeling facility for only crude conceptual design and assembly, but can network multiple systems to share a common virtual space and arbitrate the collaborative interaction. The DesignSpace prototype employs three head-tracked rear projection images, head-coupled binaural audio, hand instrumentation, and electromagnetic position tracking.
keywords	Virtual Environment; Dexterous Manipulation; Interactive Simulation; Presence; Spatial Acoustics; Manual and Gestural Communication; Teleconference; Collaboration
series	other
last changed	2002/07/07 16:01

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	ddss9426
id	ddss9426
authors	Duijvestein, Kees
year	1994
title	Integrated Design and Sustainable Building
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the international student-project "European Environmental Campus 91 TU Delft Dordrecht" 20 students from 13 European countries worked in september 1991, during three weeks on "EcologicalSketches for the Island of Dordrecht". They worked on four different scales: the region isle of Dordt / the district Stadspolders / the neighbourhood I the house and the block. The environmentaltheme's Energy, Water, Traffic & Noise, Landscape & Soil were together with spatial analyses combined with the different scales. This combination was organised following the scheme mentioned below. The characters stand for the students. During the first period they worked in research groups, during the last period more in design groups. For instance: student L works in the beginning with the students B, G and Q in the research group water. In the last period sheworks with K, M, N and 0 in the design group Neighbourhood. Those students worked earlier in the other research-groups and contribute now in the design-group their thematic environmental knowledge. The results were presented to the Dordrecht council, officials and press. In the next project in september and october 1993 we started earlier with the design groups. Ten Dutch and ten "Erasmus" students worked for six weeks on proposals for the Vinex location Wateringenthe Hague. Each morning they worked in the research groups each afternoon in the design groups. The research groups used the EcoDesign Tools, small applications in Excel on Apple Macintoshto quantify the environmental pressure.
series	DDSS
last changed	2003/08/07 16:36

_id	e2c3
authors	Edmonds A.E., Candy L., Jones R. and Soufi B.
year	1994
title	Support for Collaborative Design: Agents and Emergence
source	Communications of the ACM, (July 1994)
summary	Collaborative Design is a complex group activity involving participants with heterogenous skills. Any useful support system must take that heterogenety into account. This article demonstrates that group support agents are viable for design tasks. It explores the problem of supporting emergence, a significant feature of the sreative design process.
series	journal paper
last changed	2003/04/23 15:50

_id	f5fa
authors	Fenves, S., Flemming, U., Hendrickson, C., Maher, M.L., Quadrel, R., Terk, M. and Woodbury, R.
year	1994
title	Concurrent Computer-Aided Integrated Building Design
source	Prentice Hall, Inc. Englewood Cliffs, NJ
summary	This monograph assesses the means by which building design can be achieved in a more rapid and integrated fashion through the use of advanced computer aids.
series	other
last changed	2003/04/23 15:14

_id	6572
authors	Fioravanti, A., Le Rose, L. and Sgueglia della Marra, C.
year	1994
title	KAAD: A Didactical Experience
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 257
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w3w
summary	Students in the last year of their course in Building Engineering in the "La Sapienza" University of Rome study questions of architectural design of considerable complexity, since they are characterised by a marked degree of multi-disciplinary work. In the preceding years, the students acquire specialist notions in the fields of thermal behaviour of buildings, technological equipment, static security, architectural composition, programming and costs, technical and constructional details, and so on. However, there is a need for integration at design level of the disciplines learned. At the CAAD Laboratory of the Department of Technical Architecture and Town-planning Technique, with the contribution of the National Research Council, a software known as KAAD (Knowledge-based Assistant for Architectural Design) has been devised, with the aim of providing an effective aid to the activity of design.
series	eCAADe
last changed	2022/06/07 07:50

_id	a378
authors	Friedell, M., Kochhar, S., Marks, J., Sistare, S. and Weitzman, L.
year	1994
title	Cooperative design, Human-computer interaction, Interaction techniques, Graphical user interfaces, Design automation, Design methodologies, Automated design of graphical displays, Computer-aided design
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp.187-188
summary	Computer-aided-design (CAD) systems are now used to design all kinds of artifacts, from jet fighters to works of art. A major challenge in the design of a CAD system itself is the user interface (UI). Developing the UI to a CAD system raises myriad questions about input devices and techniques, display devices and techniques, and the details of the dialogue that relates the two. But these questions are ancillary to one central question: what is the fundamental nature of the interaction between human and computer in the design process supported by the CAD system? Is the design activity essentially manual, with the computer playing the role of passive tool, like a pen or paintbrush? Or is the computer augmenting the human designer by actively restricting available design choices, or by playing the role of critic or "improver"? Or maybe the interaction paradigm is one of "interactive evolution," in which the computer is responsible for generating design alternatives, with the human merely choosing among choices suggested by the machine. Or perhaps the computer performs the design process completely automatically, with a final acceptance check being the only human contribution? The panelists will describe these different paradigms for human-computer cooperation in a set of related CAD systems and prototypes and discuss the conditions under which each paradigm might be most useful.
series	other
last changed	2002/07/07 16:01

_id	f586
authors	Gabriel, G. and Maher, M.L.
year	2000
title	Analysis of design communication with and without computer mediation
source	Proceedings of Co-designing 2000, pp. 329-337
summary	With recent developments in CAD and communication technologies, the way we visualise and communicate design representations is changing. A matter of great interest to architects, practitioners and researchers alike, is how computer technology might affect the way they think and work. The concern is not about the notion of 'support' alone, but about ensuring that computers do not disrupt the design process and collaborative activity already going on (Bannon and Schmidt, 1991). Designing new collaborative tools will then have to be guided by a better understanding of how collaborative work is accomplished and by understanding what resources the collaborators use and what hindrances they encounter in their work (Finholt et al., 1990). Designing, as a more abstract notion, is different than having a business meeting using video conferencing. In design it is more important to 'see' what is being discussed rather than 'watch' the other person(s) involved in the discussion. In other words the data being conveyed might be of more importance than the method with which it is communicated (See Kvan, 1994). Similarly, we believe that by using text instead of audio as a medium for verbal communication, verbal representations can then be recorded alongside graphical representations for later retrieval and use. In this paper we present the results of a study on collaborative design in three different environments: face-to-face (FTF), computer-mediated using video conferencing (CMCD-a), and computer-mediated using "talk by typing" (CMCD-b). The underlying aim is to establish a clearer notion of the collaborative needs of architects using computer-mediation. In turn this has the potential in assisting developers when designing new collaborative tools and in assisting designers when selecting an environment for a collaborative session.
series	other
last changed	2003/04/23 15:50

_id	0c35
authors	Gavin, Lesley C.
year	1994
title	The Integrated Teaching of CAAD in the School of Architecture at The Robert Gordon University
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 223
doi	https://doi.org/10.52842/conf.ecaade.1994.x.i8w
summary	This paper discusses how the introduction to computers in architecture being integrated into the design studio can create a stimulating environment for the understanding of the fundamentals of computer aided design.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cc19
authors	Glennie, William L.
year	1994
title	Europe '94 - A Visitor's Report on the State of CAAD in Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 262
doi	https://doi.org/10.52842/conf.ecaade.1994.x.s5h
summary	During May, June and July of this year, I had the pleasure of visiting twelve institutions across Europe where computers are being used in the teaching of Architecture. There are as many different approaches to the incorporation of computers in the curriculum as there are places, and they all have some degree of success. My greatest surprise was the large size of these Schools, even in relatively small countries. Dealing with a huge number of students makes any kind of mandatory computer instruction almost impossible. In spite of all difficulties, enthusiasm and willingness to work directly with students was the single most important characteristic in the faculty and staff who are having the greatest success. Support staff dedicated to the maintenance of equipment and software were provided at most of the institutions. For those who do not have this benefit it is critical to relieve the teaching and research faculty of the need for these time-consuming tasks. Formal research activities are not essential to effective education. The process of setting up such efforts is again a distraction from the more important job of teaching. If research projects grow naturally out of the curriculum, they may be pursued without impeding instruction. Most serious of all, there is a substantial lack of communication and cooperation among these schools, and by implication, among all of the other schools in Europe. The mechanism of annual conferences held by ECAADE is insufficient to exchange information and interests. There were several occasions when I mentioned work that was being carried out at one place that would match very nicely with efforts at another. However, it is clearly impossible for any one school to spearhead this kind of collection and coordination of activities. The only appropriate organisation for this kind of exchange would be a centralised service initiated and maintained by the European Community. It is very important that such a body does not attempt to limit or direct the work of individual schools, rather simply serves as a clearinghouse through which the various groups can benefit from each other's work, to the mutual benefit of all.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2005_799
id	sigradi2005_799
authors	Gonzalo, Guillermo E.; Sara L. Ledesma, V.M. Nota, C.F. Martínez, G.I. Quiñones y G. Márquez Vega.
year	2005
title	Methodology for the bioclimatic design: computer sustain for election of guidelines and strategies.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 799-805
summary	After numerous studies and practical of use, field and laboratory measurements, carried out among the years 1994 and 1999, we arrived to the elaboration and presentation of a methodology for the bioclimatic design and energetically sustainable that already takes two books publications. With the support of more than 600 figures that facilitate the understanding of the concepts explained in the books and 26 computer software and databases, that are attached to the second book, the work is facilitated so that designers of buildings that have not been never in contact with a certain climate, or that they don’t have sufficiently assumed by means of the observation of the particularities of a certain climatic situation, to understand the form in that the climate influence their design, condition or determine the design solutions and averge strategies that will choose when carrying out an architecture work. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss9433
id	ddss9433
authors	Gorp, L.F.M. van, Gelder, J.T. de and Steenhuis, C.M.
year	1994
title	A Functional Approach to Conceptual Modelling of Steel Structures
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The life cycle of a steel structure can be divided into six main stages: design, detailing, manufacturing, erection, maintenance and demolition. For each stage, a different party is responsible,often using its own automation aids to assist its specific task. Since all parties operate on the same steel structure, there is a need for integration between the islands of automation. Most of the developments in this area, including ISO/STEP, are directed towards the development of conceptual models carrying all relevant information through the life cycle of the product. The conceptual models are developed following a probabilistic approach. In this approach, a conceptual model is inductively developed by analyzing and modelling empirical similarities. In this paper we explain the problems resulting from following a probabilistic modelling approach by presenting its consequences. This is illustrated by the logical product model developed in Eureka project "CIMSteel". A potential solution to these problems is proposed by presenting a functionalapproach to the development of an integrated system for design, detailing and manufacturing of steel structures. The strength of this approach is illustrated by a simple example.
series	DDSS
email
last changed	2003/08/07 16:36

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	da35
authors	Liu, Y.T.
year	1994
title	Some Phenomena of seeing shapes in design
source	Design Studies, v 16, n 3, pp. 367-385
summary	This paper is a look at some of the pyschological results that suggest how shape emergence manifest itself in the human mind. The first interesting result goes back to top down expectation guiding recognition. Some experimental suggest that it is easier (quicker) to recognize shapes which we have some alternate mental familiarity. (I.E. verbal, structural descriptions). So if we can easily say a shape then we can easily discern it as an emergent shape. The paper then goes on to discuss the definition of emergent subshapes and gives various authors definitions of what makes up and emergent shape. One interesting classification is the difference between explicit and implicit emergent shapes made by Mitchell. This difference amounts to a fine line between imagination and emergence. The results of an experiment between experienced and in-experienced designers is discussed. The results suggest that experienced designers are able to find more emergent shape than non experienced designers. From these results and from the opinions of others, the author goes on to specify 3 phenomena related to emergent recognition. The first is as above that it is easier to see shapes with which we are familiar. Second from this, the harder shapes are found after the initial period. Third, from the first two, time is required to find more subshapes. The author then searches for an explanation of this phenomena. He suggests that the underlying cause is related to an experience person having a lower threshold of what it is to be a member of a shape. When seeing an L shape the experienced design is likely to consider it also a square, because his requirement for the set of features which must be present for some object to be a considered a square is a smaller set than the inexperienced. While the author suggests that this is a phenomena it is actually an hypothesis. An alternate hypothesis may be that top down inhibitions effect the bottom up performance of the inexperienced design more because of different representation.
series	journal paper
email
last changed	2003/04/23 15:14

_id	cd34
authors	Marinelli, A.M., Belibani, R. and Gadola, A.
year	1994
title	Multimedia in Communication: A Study on the Urban Image of Barcelona
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 103-107
doi	https://doi.org/10.52842/conf.ecaade.1994.103
summary	The Hypertext on Barcelona was realized within the interuniversity scientific research "La Produzione dei circuiti multimediali didattici per l'architettura e l'urbanistica" (The production of multimedia didactic circuits for architecture and urban planning), coordinator Prof. Paola Coppola Pignatelli - Dipartimento di Progettazione Architettonica e Urbana- Facoltà di Architettura, Università "La Sapienza", Roma, Italia. During the numerous debates on the relationship between multimedia and communication of the project a long list of problems emerged: the understanding and the management of explorable fields opened by these new media; the informative overflow that can introduce irrelevant information; the "interactive" anxiousness that produces a continuous jumping from one theme to another without any understanding; the identification of the right contents of a multimedia product, that requires an elaborate culture of media languages; the education of the users on new models of learning. From the debates emerged in short a principal point: the necessity to study and to experiment a "multimedia tool" able of transmitting knowledge not through a simple sum of data but through a group of information. If every single tool has -its own characteristics and if the combinations are not automatic, then the modes and contents should be examined. Is it possible therefore to invent a strategy of communication?
series	eCAADe
last changed	2022/06/07 07:59

_id	b127
authors	Oliveira, A.L., Santiago, A.G. and Mittmann, R.
year	1999
title	Digital Floripa - CD-ROM of the City
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 399-403
summary	The graduation course of Architecture and Urbanism of the Federal University of Santa Catarina makes use of informatic tecnology in several teaching and research activities. This technology supports initial data proccessing, analysis, evaluations, simulations, and project development both in architecture and urban fields. Aiming to stimulate and improve the use of computer techniques in graduation courses, the INFOARQ group, belonging to the 'LABMICRO' developed the project 'Digital Floripa'. This project is an CD image data basis, with digital aerophotographs Florianópolis’ city taken, from the aerophotogrametric data of 1994. This project aims to facilitate image's access to teachers, students and researchers, to allow use of photos and scales, and to make possible the development of new alternatives interventions. A navegator program called 'DIGITAL INDEX'supports the user in the image's search and creates a same graphic interface. This project also acts as basis for research development wich aims to analyse and develop tutorial proceedures to access the utilization of the data images basis.
keywords	Digital Patrimony, Digital Reconstruction, Virtual Worlds
series	SIGRADI
email
last changed	2016/03/10 09:56

For more results click below: