Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 755

Reformat results as: short short into frame detailed detailed into frame

_id	4727
authors	Cabellos, C., Casaus, A., Fargas, J., Mas, M., Papazian,P. and Roses, J.
year	1994
title	Heterogeneous, Distributed, Collaborative: The Li-Long Virtual Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1994.175
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 175-182
summary	This paper describes the Li-Long Virtual Design Studio, which involved six universities in three countries, collaborating in a distributed asynchronous manner on a two-week design exercise. We give an account of the technical, methodological and design aspects of the exercise, concentrating on the perspective of the Barcelona node, and evaluating some of the technical tools used in the studio.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cc90
authors	Kolarevic, Branko
year	1998
title	CAD@HKU
doi	https://doi.org/10.52842/conf.acadia.1998.016
source	ACADIA Quarterly, vol. 17, no. 4, pp. 16-17
summary	Since 1993, we have experimented with Virtual Design Studios (VDS) as an on-going research project that investigates the combination of current computer-aided design (CAD), computer networks (Internet), and computer supported collaborative work (CSCW) techniques to bring together studentsat geographically distributed locations to work in a virtual atelier. In 1993 the theme of the first joint VDS project was in-fill housing for the traditional Chinese walled village of Kat Hing Wai in the New Territories north of Hong Kong, and our partners included MIT and Harvard in Boston (USA), UBC in Vancouver (Canada), and Washington University in St. Louis (USA). In 1994 we were joined by Cornell (USA) and Escola Tecnica Superior d’Arquitectura de Barcelona (Spain) to re-design Li Long housing in Shanghai, and 1995 added the Warsaw Institute of Technology (Poland) for the ACSA/Dupont competition to design a Center for Cultural and Religious Studies in Japan. The 1996 topic was an international competition to design a monument located in Hong Kong to commemorate the return of Hong Kong to Chinese sovereignty in 1997. Communication was via e-mail, the WorldWide Web with limited attempts at VRML, and network video. Several teaching and research experiments conducted through these projects have demonstrated the viability and potential of using electronic, telecommunications, and videoconferencing technologies in collaborative design processes. Results of these VDS have been presented at conferences worldwide, explained in journal papers and published in Virtual Design Studio, edited by J. Wojtowicz, published by HKU Press.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	8c8d
authors	Li, Andrew I Kang and Tsou, Jin Yeu
year	1996
title	Using Virtual Models to Teach Traditional Chinese Wood Construction
doi	https://doi.org/10.52842/conf.caadria.1996.119
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 119-130
summary	In this paper we discuss our experience in using virtual models to teach traditional Chinese wood construction. Although our approach is technically simple – we use a kit of model parts made with the Solid Modeler of AutoCAD, Release 12 (now Release 13), and customized commands in AutoLISP – we have had excellent results. This is because of the remarkable match between the modelling medium and the highly systematized nature of traditional Chinese wood construction. It is this crucial – and interesting – characteristic that we want students to understand and appreciate. In our first teaching experience, in the fall term, 1994-95, despite unexpected drawbacks, our approach succeeded. In fact, our students, all Hong Kong Chinese, were surprisingly enthusiastic and even took pride in the sophistication of this uniquely Chinese construction system. In 1995-96, we have used the same kit of parts in two courses: an introduction to Chinese architecture (spring term) and an advanced course in Song dynasty wood construction (fall term). We first discuss briefly the theoretical basis for our approach. We then describe the assignments, the kit of parts, and supporting materials used in our teaching experiences. Finally, we discuss our findings and consider directions for the future development and improvement of our approach.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2022_55
id	caadria2022_55
authors	Dritsas, Stylianos, Hoo, Jian Li and Fernandez, Javier
year	2022
title	Sustainable Rapid Prototyping with Fungus-Like Adhesive Materials
doi	https://doi.org/10.52842/conf.caadria.2022.2.263
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 263-272
summary	The purpose of the research work presented in this paper is to develop a sustainable rapid prototyping technology. Fused filament fabrication using synthetic polymers is today the most popular method of rapid prototyping. This has environmental repercussions because the short-lived artifacts produced using rapid prototyping contribute to the problem of plastic waste. Natural biological materials, namely Fungus-Like Adhesive Materials (FLAM) investigated here, offer a sustainable alternative. FLAM are cellulose and chitin composites with renewable sourcing and naturally biodegradable characteristics. The 3D printing process developed for FLAM in the past, targeted large-scale additive manufacturing applications. Here we assess the feasibility of increasing its resolution such that it can be used for rapid prototyping. Challenges and solutions related to material, mechanical and environmental control parameters are presented as well as experimental prototypes aimed at evaluating the proposed process characteristics.
keywords	Rapid Prototyping, Sustainable Manufacturing, Digital Fabrication, Robotic Fabrication, SDG 12
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	caadria2003_c6-2
id	caadria2003_c6-2
authors	Li Suping, Joo-Hwa Bay
year	2003
title	A Cognitive Framework of Collaborative Design Between Architects and Manufacturer-Designers
doi	https://doi.org/10.52842/conf.caadria.2003.855
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 855-870
summary	The widespread application of prefabricated products in building has made prefabrication an indispensable part of building processes. In this context, instead of handling every detail by architects themselves, some parts of architectural design have been transferred to manufacturer-designers. This inevitably brings about problems in the integration of prefabricated products and the specific buildings they serve. As a result, collaboration between architects and manufacturer-designers takes place in building processes in various forms and extents (non-, semi-, and full-collaboration). In this study, we aim to investigate collaborative design process from the cognitive aspect of design generation between architects and manufacturer-designers in terms of project-related products design. By applying the Kernel of Conceptual System theory (Tzonis et al., 1978), we intend to set up two empirical models in terms of design differences' formation in collaborative design process based on a case study with seeking the answers for the following research questions: 1. What kinds of design differences are raised in design processes? 2. Why the design differences are raised in design processes? 3. What implications could be made in developing computational models to facilitate collaborative design between architects and manufacturer-designers?
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2009_118
id	ecaade2009_118
authors	Li, Andrew I-kang; Chen, Liang; Wang, Yang; Chau, Hau Hing
year	2009
title	Editing Shapes in a Prototype Two- and Three-dimensional Shape Grammar Environment
doi	https://doi.org/10.52842/conf.ecaade.2009.243
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 243-250
summary	Recently we developed a prototype general shape grammar system, called Grammar Environment (Li et al. 2009). It differs from other systems in that it aims to support designers who design with shape grammars. One task of such a system is to support users in editing shapes. The guidelines that we followed in developing Grammar Environment suggested that the shape editing system should both be integrated into the system and be powerful as a drawing tool. This seemed to be contradictory. We decided to make two shape editors: one stronger on integration, the other on drawing power.
wos	WOS:000334282200030
keywords	Shape grammars, shape grammar interpreter, shape grammar environment
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2024_80
id	ecaade2024_80
authors	Li, Wenpei; Wu, Jiaqian; M. Herr, Christiane; Stouffs, Rudi
year	2024
title	Enhancing Lexicon Based Evaluation of Urban Green Space Characteristics and Perceptions with a Large Language Model
doi	https://doi.org/10.52842/conf.ecaade.2024.2.059
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 59–68
summary	Evaluating Urban green space Characteristics and Human Perceptions (UCHP) is crucial for landscape design and management due to their impact on public health. Online park reviews provide valuable insights into human-environment interactions, enabling the large-scale evaluation of UCHP. However, existing approaches to classify online park reviews commonly ignore text context, leading to low precision of UCHP quantification and supervised approaches are rarely applied due to huge cost. To improve the precision and effectiveness of UCHP quantification, we propose a novel workflow comprising five stages: custom lexicon creation, design of labels for a Large Language Model (LLM), sentence classification using lexicon and LLM, and performance evaluation using a manually annotated dataset and four metrics: precision, recall, accuracy, and F1 score. To examine the performance of the LLM, we compared the classification of 15 UCHP using LLM, lexicon, and lexicon+LLM. The analysis involved utilizing online park review sentences from Google Map and TripAdvisor using the proposed workflow. The higher precision, accuracy and F1 score demonstrate that combination of lexicon and LLM yields the highest performance, followed by using only lexicon and then solely LLM. This performance evaluation demonstrates the validity of the proposed LLM-aided workflow, providing a practical, reliable, and efficient alternative to the lower performance of unsupervised methods, or costly supervised classification methods. We discuss the limitations of lexicon+LLM and outline new opportunities for LLM application in landscape studies.
keywords	urban green space, characteristics and human perceptions, large language model, evaluation
series	eCAADe
email
last changed	2024/11/17 22:05

_id	caadria2020_167
id	caadria2020_167
authors	Stouffs, Rudi and Li, Andrew
year	2020
title	Learning from Users and their Interaction with a Dual-interface Shape-grammar Implementation
doi	https://doi.org/10.52842/conf.caadria.2020.2.153
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 153-162
summary	We present a shape grammar implementation with two new characteristics. One is that it is visual and directly manipulable: users draw the shapes and rules in a modeling application. The other characteristic is advanced technical capabilities, such as non-visual attributes and higher-order elements like surfaces. It consists of three components running in Rhinoceros3d. We also report on workshops that introduced the implementation.
keywords	shape grammars; interaction; implementation
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2020_193
id	caadria2020_193
authors	Wang, Sihan, Liu, Chi, Zhang, Guo Li, Luo, Qi Huan, Xu, Weishun and Raspall, Felix
year	2020
title	Digital Planting - Fabrication of Integrated Concrete Green Wall via Additive Manufacturing
doi	https://doi.org/10.52842/conf.caadria.2020.1.145
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 145-151
summary	Green walls are becoming a symbol of modern architecture representing sustainability and aesthetics. However, the fabrication of wall components that can nurture the growth of plants and other living creatures requires components to locate soil and other substrates, a controlled rugosity for plants and moss to grip, and conduits to distribute water and nutrients. This is normally done by adding extra attachments to the faÃ§ade. In this paper, we introduce a digital approach to design and produce architectural components that can integrate green wall's functional requirements into the wall itself. Such components are fabricated via Additive Manufacturing (AM) extrusion with the assists of robotic arms.
keywords	Green Wall; Additive Manufacturing; Robotic Fabrication; Clay Printing
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	b110
id	b110
authors	Abadi Abbo, Isaac and Cavallin Calanche, Humerto
year	1994
title	Ecological Validity of Real Scale Models
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 31-40
summary	Space simulation is a technique employed by architects, urban designers, environmental psychologists and other related specialists. It is used for academic and research purposes, as an aid to evaluate the impact that the built environment or that to be built would yield in potential or real users. Real Scale Model is organized as one of the models which represents more reliable spatial characteristics in space simulations. However, it is necessary to know the ecological validity of the simulations carried out, that is the degree in which laboratory results could be taken as reliable and representative of real situations. In order to discover which variables of the model used are relevant so that their perception results ecologically valid in respect to reality, a research has been designed in which simulations of specific spaces are appraised both in real space and in the real scale model. The results of both evaluations were statistically analyzed and it shows no significative differences in psychological impressions between the evaluation of real spaces and real scale model. These ecological validation of the real scale model could be of great use to estimate the validity of the results obtained in spaces simulated in the laboratory.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2006/06/24 09:29

_id	ddss9401
id	ddss9401
authors	Akin, Omer
year	1994
title	Psychology of Early Design in Architecture
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Lately there has been a good deal of emphasis on the early stages of the design process, particularly by developers of computer aids and quantitative design models for both evaluation and generation of designs in a variety of domains. Yet, there is little understanding of the early design-process. While the early design process as manifested by human designers need not be the sole basis of the description of this phase, it certainly represents and important kernel of knowledge, especially for those who are interested in developing models, systems or merely interfaces for such systems. This paper focuses on the characterization of the psychology of the early design phase in architecture. It is described in terms of the general design strategies and problem solving tactics used; and is contrasted against some of the process characteristics that
series	DDSS
email
last changed	2003/08/07 16:36

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0574
authors	Alison Murison and James Gray
year	1994
title	Spatial Analysis for Museum Design
doi	https://doi.org/10.52842/conf.ecaade.1994.201
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 201-206
summary	The paper describes how a specially written customisation of AutoCAD enables students of Architecture to use the method of spatial analysis called Space Syntax developed by Professor Bill Hillier of the Bartlett School of Architecture, London, to examine a number of existing museums, to compare the findings against other criteria, and to draw conclusions about the strategy adopted in museum design. Simple interactive graphics enable plans to be entered and compared, so that they may be evaluated during the design process, with decisions supported by objective tests. This improves both design decisions and the learning process.
series	eCAADe
last changed	2022/06/07 07:54

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	e807
authors	Anadol, Z., and Akin, O.
year	1994
title	Determining the impact of cad drafting tools on the building delivery process
source	The Int. Journal of Construction IT 2(1), pp.1-8
summary	Computer aided design is intended to change the way design and construction are carried out. at a minimum, this implies savings realized in terms of time spent and improvement of the quality of designs produced. to test this idea, we hypothesized that computer aided drafting and design operations may be instrumental in reducing the number of change orders issued and help control cost overruns by improving the accuracy of construction documents. we compared change orders in projects designed in the conventional media against ones developed with computers. we found that there is evidence supporting our hypothesis. furthermore, in the process of investigating this question, we found that computer applications to improve the management of existing building information (as-built drawings, building system related information, and the like) represent even more critical needs than those that can reduce change orders through more accurate design drawings.
series	journal paper
last changed	2003/05/15 21:45

_id	241b
authors	Anderson, Lee
year	1994
title	Film Theory and Architectural Design
doi	https://doi.org/10.52842/conf.acadia.1994.219
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 219-227
summary	This paper describes a 10 week, 3rd year architectural design studio, taught by the author, that explored the use of film and video techniques in the design process. The exploration was of (1) the potential of recently available personal computer software and hardware for image and video capture, manipulation and recording, and (2) the potential for application of video, informed by film theory, in the early stages of architectural design.
series	ACADIA
last changed	2022/06/07 07:54

_id	0ecc
authors	Anh, Tran Hoai
year	1994
title	APPLICATION OF FULL-SCALE MODELLING IN VIETNAM: AN OUTLINE FOR DISCUSSION
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 59-70
summary	This paper discusses the possibility of applying full-scale modelling in Vietnam, a non-western so called developing country. It deals with two main questions: 1) Is the application of full-scale modelling to be restricted to the West only? 2) what are the possibilities, constraints and fields of application - with attention to the methodological validity and technical solution for full-scale modelling in Vietnam? It is argued that since full-scale modelling is based on people-environment interaction, it should, in principle, apply to studies about people–environment relation anywhere on earth. On the methodological validity, it is discussed that application of full-scale modelling in Vietnam faces similar methodological problems as encountered in European applications (such as people's behaviour in experiment, ability to understand the abstraction of models, etc.) although at another level as this paper will make clear. However, it would be needed to design a modelling kit that is of low costs and adapted to the availability of local materials and suitable for the climatic condition of Vietnam. Two fields of application are projected as most applicable in Vietnam: modelling in architectural education and research investigation. Application for user's participation in the design process will depend on the development of building policy in the country.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
last changed	2004/05/04 11:00

_id	592b
authors	Apollonio, F., Carini, A., Farina, R., Nuti, F. and Tolomelli, F.
year	1994
title	THE ITALIAN FULL-SCALE MODEL LABORATORY: CONSIDERATIONS ABOUT SOME TOOLS FOR ARCHITECTURAL EXPERIMENTATION
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 71-82
summary	The Italian simulation laboratory carries out most of its activity within the experimental programmes promoted by the Ministry of Works. Within this context, we conducted studies based on the topics of EUROPAN competitions for young architects, built models based on EUROREX programme's projects and analyzed experimental projects directly financed by the Ministry (mainly restoration projects).
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 11:01

_id	ddss9402
id	ddss9402
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1994
title	Design of a View-Based DSS For Location Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes the design of a DSS for locating facility networks. The proposed DSS is based on the principle of dynamic data definitions. The declarative and procedural forms of knowledge involved are identified by a logical analysis of planning tasks. The DSS supports an iterating process of adjusting and evaluating plan options. A flexible and interactive problem solving environment is achieved by means of a user defined set of views that captures both forms of knowledge. Each view describes the system to be planned in terms of a set of variables and attached evaluation procedures. The views are dynamic and linked data structures, so that changes in one view automatically lead to updating all linked views. The DSS supports both the specification of the set of views and its application to solve a specific location problem.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9403
id	ddss9403
authors	Arentze, T., Borgers, A., Dellaert, B. and Timmermans, H.
year	1994
title	A Multi-Purpose Multi-Stop Model Describing Consumers' Choices of Shopping Centres
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Recently, a number of interesting extensions to traditional decompositional and discrete choice models has been introduced that allow one to combine parameters estimated in different phases ofcomplex choice processes. These extensions offer new possibilities to model combinations of choices consumers make if they select shopping centres to visit. This paper will introduce a modelling approach that describes consumer choices of shopping centres involving multiple shopping functions (multi purpose) as well as locations (multi stop). The approach extends traditional decompositional models of single choices to a model of combinations of choices. It uses a recursive scaling procedure that combines attributes related to different shopping functions and to shopping centres at different locations. The model will be tested on data collected on shopping behaviour in Maastricht, the Netherlands.
series	DDSS
email
last changed	2003/08/07 16:36

For more results click below: