Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3755

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2005_799
id	sigradi2005_799
authors	Gonzalo, Guillermo E.; Sara L. Ledesma, V.M. Nota, C.F. Martínez, G.I. Quiñones y G. Márquez Vega.
year	2005
title	Methodology for the bioclimatic design: computer sustain for election of guidelines and strategies.
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 2, pp. 799-805
summary	After numerous studies and practical of use, field and laboratory measurements, carried out among the years 1994 and 1999, we arrived to the elaboration and presentation of a methodology for the bioclimatic design and energetically sustainable that already takes two books publications. With the support of more than 600 figures that facilitate the understanding of the concepts explained in the books and 26 computer software and databases, that are attached to the second book, the work is facilitated so that designers of buildings that have not been never in contact with a certain climate, or that they don’t have sufficiently assumed by means of the observation of the particularities of a certain climatic situation, to understand the form in that the climate influence their design, condition or determine the design solutions and averge strategies that will choose when carrying out an architecture work. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	maver_073
id	maver_073
authors	Rutherford, J. and Maver, T.W.
year	1994
title	Knowledge Based Design Support
source	Knowledge Based Computer-Aided Architectural Design (Ed. G Carrara and Y Kalay), Elsevier, 243-268
summary	In 1971 the Architects' Journal featured a paper entitled PACE 1: Computer Aided Building Appraisal. The softwareknown as PACE (Package for Architectural Computer Evaluation), initially developed on the Systemshare time-sharing system accessed on- line from a teletype terminal over the ordinary voice grade telephone network, has, in concept at least, survived the subsequent 22 years and remains to this day a crucial aid in the teaching of architectural design in the University of Strathclyde's Department of Architecture and Building Science.
series	other
type	normal paper
email
last changed	2015/02/20 11:39

_id	9779
authors	Smeltzer, G.T.A., Mantelers, J.M.M. and Roelen, W.A.H.
year	1994
title	The Application of Virtual Reality Systems in Architectural Design Processes
source	BIT Note Publication 95/1, Building Information Technology, Eindhoven
summary	This publication describes the development and the application of a Virtual Reality system for the architectural design process. It is based on the results of research into Virtual Reality technology and in particular into the possibilities of a natural interface between a designer and a design system. This description is also based on the development of a laboratory set up for a "full immersive" and a "partially immersive" Virtual Reality application. This application offers a designer the possibility of modifying and assessing a 3D design model in "Virtual Reality" and is used in the course of several case studies. One of these case studies was the making of a presentation of a house design to possibly interested parties. The other case study was the use of Virtual Reality in the course of a design process. Finally this publication includes the description of some future and anticipated developments. The research problem is mainly posed by the questions regarding the ways in which the design process changes under the influence of amongst other factors the Virtual Reality technology. Other questions concern the ways in which the interface between a designer and a design system can be made as natural as possible, the way in which a design model can behave as autonomous as possible, and the way in which a representation can be made as realistic as possible. With regard to these the starting points were respectively the use of sensors, the definition of behaviour characteristics and the use of illumination simulations.
series	other
last changed	2003/04/23 15:50

_id	ddss9486
id	ddss9486
authors	Smeltzer, Geert
year	1994
title	The Application of Virtual Reality Systems in Architectural Design Processes
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes the application of virtual reality systems in architectural design processes. It is based upon research on virtual reality technology to develop a more natural interface between men and design systems. It is also based upon the development of an integrated laboratory set-up for an immersive and a desk-top virtual reality system. This set-up should offer possibilities to manipulate 3D design models and to simulate the lighting situation in real time. Finally it is based upon an application of virtual reality technology for a design presentation. The research problem was determined by the question in which way the design process changes under the influence of technology. Other research questions, autonomous as possible, were how natural an interface can be using sensors, how a design model can be using real world features and how a representation can be as realistic as possible, using lighting simulations. The development problem was determined by the fact that the laboratory set-up had to be developed in co-operation with a hardware and a software vendor. This led to the development of two set-ups: one immersive virtual reality system and one desk top system. Another problem for the development of the set-up was that the project had to result in the presentation and demonstration of virtual reality technol-ogy that was not yet generally available to a larger group of organisations or enterprises. The first case study involved the development of a virtual reality presentation of a housing project in the Netherlands. The presentation was meant for people who were interested in the houses and was announced as a virtual open house. A potential buyer could walk through the model and move furniture around. The problem addressed concerned the relationship between the level of detail of the model, the speed of representation and the ease of interface system's. The second case study concerned the use of a virtual reality interface, model and representation for the evaluation of visibility and safety aspects of another housing project. At first this application was meant for the designers and their client. Based upon their evaluation of the design, several design improvements were made. Afterwards, this application was used for internal demonstrations. The application for the evaluation and the demonstrations were developed for an immersive virtual reality system and for a desk top system. The problem addressed was first of all a design problem and secondly a technical problem. This technical problem was related to the difference between the two virtual reality systems in terms of consequences for those applications. In the near future the research project, called the Asterisk project, will also examine and develop the possibilities of the simultaneous use of the system by more than one user, possibly on different locations. This means a development from single user single site to a multi user, a multiple site virtual reality systems. This project will also evaluate the feasibility of the application of virtual reality technology during an architectural design process. This research project will be followed by the development of a prototype of a virtual architecture system demonstrations of this system and an introduction to the market.
series	DDSS
email
last changed	2003/08/07 16:36

_id	e924
authors	Willems, P.H., Kuiper, P. and Luiten, G.T. (et al)
year	1991
title	A Framework for Evolutionary Information Model Development
source	The Computer Integrated Future, CIB W78 Seminar. September, 1991. Unnumbered :ill. includes bibliography
summary	Large scale information modelling projects, like the development of ISO/STEP, require a modelling approach that does not develop a new model from scratch, but rather base it on a more generic model which, in turn, is based on an even more abstract model, etc. The resulting structure shows a layered framework. On top of which can be found the most generic concepts and downward the more specific concepts with increased semantics. The benefits of such a model development approach are improvements in: version management, object orientated modelling, concurrent model development, controlled change, standardized interfaces, conformance testing etc. This paper describes an environment which supports the development of a new model out of one or more generic parent models. The generation process consists of two steps. In the first step entities of the parent models can be instanciated while constraining the inherited behavior and introducing new behavior. In fact this process is identical with instanciating run time objects from class templates in the object oriented paradigm. However, in the authors' development environment an important (inherited) property of each entity is self-reproduction. In the second step, therefore, each instance is forced to represent its run time state into some kind of information modelling language specification. Appropriate measures are taken to guarantee that the resulting model will conform the behavior of its parent model(s). The paper demonstrates this approach in a multi-layered example currently being implemented and explores several implementation issues
keywords	product modeling, standards, integration, abstraction, OOPS
series	CADline
last changed	2003/06/02 13:58

_id	ddss9402
id	ddss9402
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1994
title	Design of a View-Based DSS For Location Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes the design of a DSS for locating facility networks. The proposed DSS is based on the principle of dynamic data definitions. The declarative and procedural forms of knowledge involved are identified by a logical analysis of planning tasks. The DSS supports an iterating process of adjusting and evaluating plan options. A flexible and interactive problem solving environment is achieved by means of a user defined set of views that captures both forms of knowledge. Each view describes the system to be planned in terms of a set of variables and attached evaluation procedures. The views are dynamic and linked data structures, so that changes in one view automatically lead to updating all linked views. The DSS supports both the specification of the set of views and its application to solve a specific location problem.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9403
id	ddss9403
authors	Arentze, T., Borgers, A., Dellaert, B. and Timmermans, H.
year	1994
title	A Multi-Purpose Multi-Stop Model Describing Consumers' Choices of Shopping Centres
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Recently, a number of interesting extensions to traditional decompositional and discrete choice models has been introduced that allow one to combine parameters estimated in different phases ofcomplex choice processes. These extensions offer new possibilities to model combinations of choices consumers make if they select shopping centres to visit. This paper will introduce a modelling approach that describes consumer choices of shopping centres involving multiple shopping functions (multi purpose) as well as locations (multi stop). The approach extends traditional decompositional models of single choices to a model of combinations of choices. It uses a recursive scaling procedure that combines attributes related to different shopping functions and to shopping centres at different locations. The model will be tested on data collected on shopping behaviour in Maastricht, the Netherlands.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9409
id	ddss9409
authors	Beekman, Solange and Rikhof, Herman G.A.
year	1994
title	Strategic Urban Planning in the Netherlands
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Since the mid-1980s, several Dutch towns have initiated many urban planning and design activities for their existing area. This represented a shift in that previous urban planning projects typicallyconcerned expansion in the outskirts of the city, or urban renewal. The complex and expensive renovation of the existing housing stock rarely allowed a deep interest in urban design. Since 1985, attention shifted from the housing stock to the city as a whole. Furthermore, public andprivate actors increasingly become involved in the planning process. It became clear that a more comprehensive plan for the whole existing town or region was needed. Conventional planning instruments were considered ill-suited for this new challenge. The paper discusses promising attempts of various urban planning instruments to get a stronger but also more flexible hold on thetransformation of the urban planning area in the Netherlands. These new planning instruments have three common characteristics: (i) they give special attention to the different levels of urban management needed for different urban areas, (ii) these strategic plans provide an integral view on the urban developments, and (iii) these plans introduce a new strategy to deal with both private initiatives to transform urban sites and monitor wishes, proposals, etc. from inhabitants in the neighbourhoods. A comparative analyses of several cities indicates, however, that, in addition to these common characteristics, major differences between their strategic plans exist depending upon their historic patrimonium, economic status and planning tradition.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	7d6c
authors	Chapin, William L., Lacey, T. and Leifer, Larry
year	1994
title	DesignSpace: A Manual Interaction Environment for Computer Aided Design DEMONSTRATIONS: Virtual Reality Multimedia
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp. 33-34
summary	DesignSpace is a computer-aided-design (CAD) system that facilitates dexterous manipulation of mechanical design representations. The system consists of an interactive simulation programmed with a seamless extended model of the designer's physical environment and driven with continuous instrumentation of the designer's physical actions. The simulation displays consistent visual and aural images of the virtual environment without occluding the designer's sensation of the physical surroundings. Developed at Stanford University's Center for Design Research (CDR), DesignSpace serves as an experimental testbed for design theory and methodology research. DesignSpace includes significant contributions from recent CDR development projects: TalkingGlove, CutPlane, VirtualHand, TeleSign, and VirtualGrasp. The current DesignSpace prototype provides modeling facility for only crude conceptual design and assembly, but can network multiple systems to share a common virtual space and arbitrate the collaborative interaction. The DesignSpace prototype employs three head-tracked rear projection images, head-coupled binaural audio, hand instrumentation, and electromagnetic position tracking.
keywords	Virtual Environment; Dexterous Manipulation; Interactive Simulation; Presence; Spatial Acoustics; Manual and Gestural Communication; Teleconference; Collaboration
series	other
last changed	2002/07/07 16:01

_id	6651
id	6651
authors	Chen, N., Kvan, T., Wojtowicz, J., Van Bakergem, D., Casaus, T., Davidson, J., Fargas, J., Hubbell, K., Mitchell, W., Nagakura, T. and Papazian, P.
year	1994
title	PLACE, TIME AND THE VIRTUAL DESIGN STUDIO
doi	https://doi.org/10.52842/conf.acadia.1994.115
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 115-132
summary	A design problem shared over the Internet raises issues of how digital media and group dynamics affect networked design collaborations. This paper describes how to conduct a long-distance studio and compares asynchronous and synchronous collaborative techniques. Digital methods are discussed in relationship to both the creative process and design communication. In schematic stages, less precise tools used asynchronously allow free exploration and creative misreadings, while in later stages, more direct real-time exchanges bring a project to resolution. For the final review, synchronous video-conferencing with interactive graphics allow comparison of cross-cultural differences. Used effectively, these tools can electronically create a compelling sense of place. Ways to foster a strong virtual community are discussed in an agenda for future virtual design.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	7ed5
authors	Corne, D., Smithers, T. and Ross, P.
year	1994
title	Solving design problems by computational exploration
source	J. S. Gero and E. Tyugu (eds), Formal Design Methods for CAD, NorthHolland, Amsterdam, pp. 249-270
summary	Most real-world problems, especially design problems, are ill-structured, but formal approaches to problem-solving in AI have only really made progress into techniques for solving well-structured problems. Nevertheless, such research contains clues which illuminate the way towards formal approaches to solving ill-structured problems. This paper presents the foundations of an approach towards developing a better computational understanding of ill-structured problems and how to solve them computationally, with the eventual aim of giving AI problems a much greater and more useful role in the design process. The main issues which come up in this endeavour are the notions of different kinds of ill-structuredness, and the meaning of a 'solution' to an ill-structured (and hence possibly insoluble) problem. Some basic algorithmic recipes are proposed for dealing with the main kinds of ill-structuredness, and the initial design of a general computational technique which deals with general ill-structuredness is discussed.
series	other
last changed	2003/04/23 15:14

_id	4f82
authors	Dave, B. and Schmitt, G.
year	1994
title	Information systems for urban analysis and design development
source	Environment and Planning B: Planning and Design 21, pp. 83-96
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	af8b
authors	Dave, B., Schmitt, G., Faltings, B. and Smith, I.
year	1994
title	Case-based design in Architecture
source	J.S. Gero and F. Sudweeks (eds.), the proceedings of Artificial Intelligence in Design '94, pp.145-162
summary	Computational support in the domain of building design is hampered by the need to control generation and search processes both of which are elusive due to the lack of strong domain theories. Case based reasoning paradigm may be useful to overcome some of these difficulties. A case based design system is presented here that enables case adaptation and case combination of design cases to generate new design solutions more efficiently. Some issues in our approach that are different from other projects with similar aims are also discussed.
series	other
email
last changed	2003/04/23 15:50

_id	ddss9426
id	ddss9426
authors	Duijvestein, Kees
year	1994
title	Integrated Design and Sustainable Building
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the international student-project "European Environmental Campus 91 TU Delft Dordrecht" 20 students from 13 European countries worked in september 1991, during three weeks on "EcologicalSketches for the Island of Dordrecht". They worked on four different scales: the region isle of Dordt / the district Stadspolders / the neighbourhood I the house and the block. The environmentaltheme's Energy, Water, Traffic & Noise, Landscape & Soil were together with spatial analyses combined with the different scales. This combination was organised following the scheme mentioned below. The characters stand for the students. During the first period they worked in research groups, during the last period more in design groups. For instance: student L works in the beginning with the students B, G and Q in the research group water. In the last period sheworks with K, M, N and 0 in the design group Neighbourhood. Those students worked earlier in the other research-groups and contribute now in the design-group their thematic environmental knowledge. The results were presented to the Dordrecht council, officials and press. In the next project in september and october 1993 we started earlier with the design groups. Ten Dutch and ten "Erasmus" students worked for six weeks on proposals for the Vinex location Wateringenthe Hague. Each morning they worked in the research groups each afternoon in the design groups. The research groups used the EcoDesign Tools, small applications in Excel on Apple Macintoshto quantify the environmental pressure.
series	DDSS
last changed	2003/08/07 16:36

_id	cf2009_585
id	cf2009_585
authors	E. Swarts, Matthew; A. Sheward, Hugo
year	2009
title	Using multi-level virtual environments as a medium for conducting design review through a shared IFC dataset
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 585- 597
summary	For a long time the Architecture-Engineering-Construction (AEC) community has had difficulty in communicating the content of their work, not only the various specialties involved, but also to their clients. Studies (Doorst and Cross 2001; Bakhtin 1994) suggest the importance of multi-role collaborative environments in supporting design processes. We are developing a Multi Level Design Review Tool for the AEC industry which allows multiple actors to congregate and interact as agents around a central Building Model. It merges real-time virtual 3D visualization technologies with Industry Foundation Classes (IFC) to support both high levels of semantic content and seamless interoperability.
keywords	Design review, virtual environment, interoperability
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ecaadesigradi2019_027
id	ecaadesigradi2019_027
authors	Erzetic, Catherine, Dobbs, Tiara, Fabbri, Alessandra, Gardner, Nicole, Haeusler, M. Hank and Zavoleas, Yannis
year	2019
title	Enhancing User-Engagement in the Design Process through Augmented Reality Applications
doi	https://doi.org/10.52842/conf.ecaade.2019.2.423
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 423-432
summary	Augmented Reality (AR) technologies are often perceived as the most impactful method to enhance the communication between the designer and the client during the iterative design process. However, the significance of designing the User Interface (UI) and the User Experience (UX) are often underestimated. To intercede, this research aims to employ new and existing techniques to develop UI's, and comparatively assess "the accuracy and completeness with which specified users can achieve specified goals in particular environments" (Stone, 2005) - a notion this research delineates as 'effectiveness'. Prompted by the work of key scholars, the developed UI's were assessed through the lens of existing UI evaluation techniques, including: Usability Heuristics (Nielsen, 1994) and Visual and Cognitive Heuristics (Zuk and Carpendale, 2006). In partnership with PTW Architects, characteristics such as the rapidity and complexity of interactions, in conjunction with the interface's simplicity and intuitiveness, were extracted from 15 trials underwent by architectural practitioners. The outcomes of this research highlights strategies for the effective development of user interface design for mobile augmented reality applications.
keywords	User Interface; Human Centered Design; User Experience; Heuristics; Usability Inspection Method
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

For more results click below: