Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3319

Reformat results as: short short into frame detailed detailed into frame

_id	af8b
authors	Dave, B., Schmitt, G., Faltings, B. and Smith, I.
year	1994
title	Case-based design in Architecture
source	J.S. Gero and F. Sudweeks (eds.), the proceedings of Artificial Intelligence in Design '94, pp.145-162
summary	Computational support in the domain of building design is hampered by the need to control generation and search processes both of which are elusive due to the lack of strong domain theories. Case based reasoning paradigm may be useful to overcome some of these difficulties. A case based design system is presented here that enables case adaptation and case combination of design cases to generate new design solutions more efficiently. Some issues in our approach that are different from other projects with similar aims are also discussed.
series	other
email
last changed	2003/04/23 15:50

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss2004_d-49
id	ddss2004_d-49
authors	Polidori, M. and R. Krafta
year	2004
title	Environment – Urban Interface within Urban Growth
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 49-62
summary	This work presents the synthesis of a model of urban growth dedicated to accomplish simulations of urban spatial dynamics, based on integrated urban and environmental factors and promoting simultaneity among external and internal growth. The city and surrounding environment are captured and modeled in computational ambient, by application of the centrality / potential model (Krafta, 1994 and 1999), with support of graph theory, cellular automata, GIS and geocomputation. The model assumes the city as a field of opportunities for obtaining income, mediated by the space, which is composed of urban and environmental attributes, that work as attractors or as resistances for the urban growth. The space configuration and the distribution of those attributes generate tensions that differentiate qualitatively and quantitatively the space, through the centrality measure (built with the support of graphs techniques), coming to provoke growth in places with larger potential of development (built with the help of techniques of CA – cellular automata). Growths above environmental thresholds are considered problems, generated and overcome in the same process of production of the urban space. Iterations of that process offer a dynamic behaviour to the model, allowing to observe the growth process along the time. The model presents several possibilities: a) urban - natural environment integration; b) internal and external growth integration; c) variety in the scale; d) GIS integration and geocomputation; e) user interface; f) calibration; g) theoretical possibilities; and h) practical possibilities.
keywords	Environment, Urban Growth, Urban Morphology, Simulation
series	DDSS
last changed	2004/07/03 22:13

_id	af48
authors	Schuur, J.
year	1994
title	Analysis and design in computer-aided physical planning
source	Environment and Planning B: Planning and Design 21, pp. 97-108
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:41

_id	6637
authors	Ward, D., Brown, A.G.P. and Horton, F.F.
year	1994
title	A Design Assistant for Environmental Optimisation of Buildings
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u0s
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 247
summary	The dual function of the Environmental Design Assistant which we have developed is to act firstly as a teaching aid and secondly as a design aid. In terms of it's role as a design assistant it is similar in nature to the application described by Papamichael, K, in Novitski, B. J. (1993). However, the work described here forms part of an overall strategy to develop a user friendly design assistant across the spectrum of Architectural design disciplines: this is one particular strand of the project. One aim embodied in the development of the environmental design assistant has been the pragmatic one of the production and refining of a tool to perform environmental assessments of buildings in accordance with the British recommendations made in BREEAM (Building Research Establishment Energy Assessment Method). In this respect the assistant allows for the consequences of design decisions to be readily assessed and then for those decisions to be modified. The Assistant has undergone a series of refinements to make it more user-friendly, efficient and appropriate as an Architectural design aid; and this has been the second aim of the project. The project has acted as a vehicle for the application of design principles applied to the presentation, information structuring and navigation associated with Hypermedia and Multimedia products. We are applying the kind of good design principles which have been summarised well by Schulmeister, R. (1994). These principles include Ariadne's Thread (paths for navigation), Lost in Hyperspace (backward navigation), More-than-browsing (interaction) and Tutoring (providing feedback to the user). Adoption of such principles is, we believe, essential in order to realise the potential of Hypermedia tools. The principal development tool for the work has been SuperCard. This has been used in conjunction with a range of other software including ArchiCad and Intellidraw and a range of image grabbing devices.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	95b3
authors	Wernecke, J.
year	1994
title	The Inventor Mentor: programming Object-oriented 3D graphics with Open Inventor
source	Release 2 Addison Wesley
summary	The Inventor Mentor introduces graphics programmers and application developers to Open Inventor, an object-oriented 3D toolkit. Open Inventor is a library of objects and methods used for interactive 3D graphics. Although it is written in C++, Open Inventor also includes C bindings. For the sake of brevity, the examples included in this book are in C++. All C++ examples, as well as equivalent examples written in C, are available on-line. If you are new to the C++ language, see Appendix A, "An Introduction to Object-Oriented Programming for C Programmers," to help you understand the references to classes, subclasses, and other object-oriented concepts used throughout this book. If you are using the C application programming interface, also see Appendix B, "An Introduction to the C API." This book describes how to write applications using the Open Inventor toolkit. The Inventor Toolmaker, a companion book for the advanced programmer, describes how to create new Inventor classes and how to customize existing classes. The Inventor Mentor contains the following chapters: * Chapter 1, "Overview," provides a general description of Open Inventor concepts and classes and how Inventor relates to OpenGL and the X Window System. * Chapter 2, "An Inventor Sampler," presents a short program that creates a simple object. This program is then modified to show the use of important Inventor objects: engines, manipulators, and components. * Chapter 3, "Nodes and Groups," introduces the concept of a scene graph and shows how to create nodes and combine them into different kinds of groups. * Chapter 4, "Cameras and Lights," describes the camera nodes used to view a scene and the light nodes that provide illumination. * Chapter 5, "Shapes, Properties, and Binding," describes how to create both simple and complex shapes and how to use property nodes, including material, draw style, and lighting model nodes. Binding materials and surface normals to shape nodes is also explained. * Chapter 6, "Text," shows the use of 2D and 3D text nodes. * Chapter 7, "Textures," describes how to apply textures to the surfaces of objects in a scene. * Chapter 8, "Curves and Surfaces," explains how to use NURBS curves and surfaces. * Chapter 9, "Applying Actions," describes how operations are applied to an Inventor scene graph. Actions include OpenGL rendering, picking, calculating a bounding box, calculating a transformation matrix, writing to a file, and searching the scene graph for certain types of nodes. * Chapter 10, "Handling Events and Selection," explains how Inventor receives events from the window system. It also describes how the selection node manages a selection list and performs highlighting. * Chapter 11, "File Format," describes Inventor's interchange file format, used for reading files into Inventor, writing files out from Inventor, and data exchanges such as copy and paste. * Chapter 12, "Sensors," describes how Inventor sensors watch for certain types of events and invoke user-supplied callback functions when these events occur. * Chapter 13, "Engines," describes how you can use Inventor engines to animate parts of a scene graph, or to create interdependencies among the nodes in the graph. * Chapter 14, "Node Kits," introduces node kits, a convenient mechanism for creating groups of related Inventor nodes. Each node kit contains a catalog of nodes from which you select the desired nodes. * Chapter 15, "Draggers and Manipulators," describes how to use draggers and manipulators, which are special objects in the scene graph that respond to user events. Manipulators are nodes with field values that can be edited directly by the user. * Chapter 16, "Inventor Component Library," shows how to use Inventor's Xt components, which are program modules with a built-in user interface for changing the scene graph interactively. It also Chapter 17, "Using Inventor with OpenGL," discusses how to use Inventor with the OpenGL Library.
series	other
last changed	2003/04/23 15:14

_id	ddss9403
id	ddss9403
authors	Arentze, T., Borgers, A., Dellaert, B. and Timmermans, H.
year	1994
title	A Multi-Purpose Multi-Stop Model Describing Consumers' Choices of Shopping Centres
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Recently, a number of interesting extensions to traditional decompositional and discrete choice models has been introduced that allow one to combine parameters estimated in different phases ofcomplex choice processes. These extensions offer new possibilities to model combinations of choices consumers make if they select shopping centres to visit. This paper will introduce a modelling approach that describes consumer choices of shopping centres involving multiple shopping functions (multi purpose) as well as locations (multi stop). The approach extends traditional decompositional models of single choices to a model of combinations of choices. It uses a recursive scaling procedure that combines attributes related to different shopping functions and to shopping centres at different locations. The model will be tested on data collected on shopping behaviour in Maastricht, the Netherlands.
series	DDSS
email
last changed	2003/08/07 16:36

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
doi	https://doi.org/10.52842/conf.ecaade.1995.355
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	0e89
authors	Bradford, J.W., Cheng, N. and Kvan, Thomas
year	1994
title	Virtual Design Studios
doi	https://doi.org/10.52842/conf.ecaade.1994.163
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 163-167
summary	Beginning in 1993, small groups of students of architectural design at different institutions around the world participated in collaborative design projects using a variety of tools, including CAD, Internet and teleconferencing. This programme, known as the "Virtual Design Studio" (VDS), allows students to work collectively with colleagues from different cultures and climates who are thousands of kilometres and in different time zones. Most recently, in February 1994, four institutions in N. America, one in Europe, and one in S E Asia participated in VDS’94. This paper explains the operation of the VDS and explores the future of the VDS as a potential tool for architectural design education. In particular, we review what we have learned in employing computer tools to extend the teaching in design studios into a "virtual" experience.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	4727
authors	Cabellos, C., Casaus, A., Fargas, J., Mas, M., Papazian,P. and Roses, J.
year	1994
title	Heterogeneous, Distributed, Collaborative: The Li-Long Virtual Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1994.175
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 175-182
summary	This paper describes the Li-Long Virtual Design Studio, which involved six universities in three countries, collaborating in a distributed asynchronous manner on a two-week design exercise. We give an account of the technical, methodological and design aspects of the exercise, concentrating on the perspective of the Barcelona node, and evaluating some of the technical tools used in the studio.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	6651
id	6651
authors	Chen, N., Kvan, T., Wojtowicz, J., Van Bakergem, D., Casaus, T., Davidson, J., Fargas, J., Hubbell, K., Mitchell, W., Nagakura, T. and Papazian, P.
year	1994
title	PLACE, TIME AND THE VIRTUAL DESIGN STUDIO
doi	https://doi.org/10.52842/conf.acadia.1994.115
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 115-132
summary	A design problem shared over the Internet raises issues of how digital media and group dynamics affect networked design collaborations. This paper describes how to conduct a long-distance studio and compares asynchronous and synchronous collaborative techniques. Digital methods are discussed in relationship to both the creative process and design communication. In schematic stages, less precise tools used asynchronously allow free exploration and creative misreadings, while in later stages, more direct real-time exchanges bring a project to resolution. For the final review, synchronous video-conferencing with interactive graphics allow comparison of cross-cultural differences. Used effectively, these tools can electronically create a compelling sense of place. Ways to foster a strong virtual community are discussed in an agenda for future virtual design.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	e751
id	e751
authors	Clayton, M.J., Kunz, J.C., Fischer, M.A. and Teicholz, P.
year	1994
title	First Drawings, Then Semantics
doi	https://doi.org/10.52842/conf.acadia.1994.013
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 13-26
summary	The Semantic Modeling Extension (SME) prototype implements a unique approach to integrated architectural CAD that places the drawing act first in the design process. After drawing a design idea using a computer graphic system, the designer interprets the design, providing semantic content to the graphic entities. An interpretation expresses the meaning of the design with respect to a particular issue, such as structural sufficiency, energy consumption, or requirements for egress, and provides reasoning to evaluate the design addressing that issue. A design may have many interpretations to express the multiple issues that are relevant in a design project. The designer may add or delete interpretations of the design as issues change during the course of the project. Underlying the SME prototype are the concepts of form, function and behavior. In the prototype, evaluation of a design is done by deriving behavior from the graphically represented forms and relating the behavior to stated functions or requirements. The concepts of interpretations and form, function and behavior together establish a virtual product model for design. In contrast to component based approaches to product modeling that tightly bind form representations to their behavior and function, a virtual product model allows the designer to manipulate the relations among these three descriptors of a design, and thus manipulate the semantics of the design entities. By distinguishing between the act of proposing a design by drawing the conceived form and the act of assigning meaning to the form, the virtual product model approach supports both graphic thinking for design synthesis and symbolic reasoning for design evaluation. This paper presents a scenario of the use of the SME prototype in building design; provides an analysis of the design process and computational support described in the scenario; contrasts a virtual product model approach with a component-oriented product model approach; describes the software implementation of SME; and presents implications and conclusions regarding design process and technical integration.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	7ed5
authors	Corne, D., Smithers, T. and Ross, P.
year	1994
title	Solving design problems by computational exploration
source	J. S. Gero and E. Tyugu (eds), Formal Design Methods for CAD, NorthHolland, Amsterdam, pp. 249-270
summary	Most real-world problems, especially design problems, are ill-structured, but formal approaches to problem-solving in AI have only really made progress into techniques for solving well-structured problems. Nevertheless, such research contains clues which illuminate the way towards formal approaches to solving ill-structured problems. This paper presents the foundations of an approach towards developing a better computational understanding of ill-structured problems and how to solve them computationally, with the eventual aim of giving AI problems a much greater and more useful role in the design process. The main issues which come up in this endeavour are the notions of different kinds of ill-structuredness, and the meaning of a 'solution' to an ill-structured (and hence possibly insoluble) problem. Some basic algorithmic recipes are proposed for dealing with the main kinds of ill-structuredness, and the initial design of a general computational technique which deals with general ill-structuredness is discussed.
series	other
last changed	2003/04/23 15:14

_id	4f82
authors	Dave, B. and Schmitt, G.
year	1994
title	Information systems for urban analysis and design development
source	Environment and Planning B: Planning and Design 21, pp. 83-96
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	b81d
authors	Davies, C. and Harrison, J.
year	1996
title	Osmose: Towards Broadening the Aesthetics of Virtual Reality
source	ACM Computer Graphics: Virtual Reality Volume 30, Number 4
summary	Osmose is an immersive virtual environment, produced by Softimage in 1994/95. One of the primary goals of Osmose was to push the expressive capabilities of existing 3D tools, to demonstrate that an alternative aesthetic and interactive sensibility is possible for real-time, interactive, 3D computer graphics. Osmose was created under the direction of Char Davies, the Director of Visual Research at Softimage. A former painter, as well as a creator of 3D computer graphic stills, Davies has a particular artistic vision which has driven the project. Davies has been striving for years to represent space as a luminous enveloping medium. This has led her from painting to 3D computer graphics, and finally into creating immersive virtual spaces. One of Davies' intentions for Osmose was to create a space that is "psychically innovating," one in which, to quote Bachelard, participants do not change "place," but change their own nature. Osmose was therefore designed to explore the potential of immersive virtual space to allow participants to shed their habitual ways of looking at (and behaving in) the world. By doing this, we hoped they would then emerge from the virtual world to experience the real world in a fresh way, reawakening a fundamental sense of their own "being-in-the-world." We hoped that this could be accomplished through the visual, aural and interactive aesthetic of the work.
series	journal paper
last changed	2003/04/23 15:50

_id	64c5
authors	De Mesa, A., Monedero, J., Redondo, E. and Regot, J.
year	1994
title	From Image Space to Model Space and Back Again
doi	https://doi.org/10.52842/conf.ecaade.1994.060
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 60-68
summary	The paper describes in detail a process of work consisting of merging a virtual model into a real image. This process implies three different kinds of operations: geometric restoration of the real scene, in 3D, from a photograph, rendering a virtual model under similar conditions as the photograph, and merging of the rendered image with the original image. The paper empasises quality and visual precision of results together with a semiautomatization of the entire process. It also refers critically these three different groups of operations to their theoretical background. It concludes with an evaluation of the work from the point of view of architectural visual analysis and from the point of view of architectural visual analysis and from the point of view of a general design methodology.
series	eCAADe
last changed	2022/06/07 07:56

For more results click below: