Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1503

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9402
id	ddss9402
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1994
title	Design of a View-Based DSS For Location Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes the design of a DSS for locating facility networks. The proposed DSS is based on the principle of dynamic data definitions. The declarative and procedural forms of knowledge involved are identified by a logical analysis of planning tasks. The DSS supports an iterating process of adjusting and evaluating plan options. A flexible and interactive problem solving environment is achieved by means of a user defined set of views that captures both forms of knowledge. Each view describes the system to be planned in terms of a set of variables and attached evaluation procedures. The views are dynamic and linked data structures, so that changes in one view automatically lead to updating all linked views. The DSS supports both the specification of the set of views and its application to solve a specific location problem.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9403
id	ddss9403
authors	Arentze, T., Borgers, A., Dellaert, B. and Timmermans, H.
year	1994
title	A Multi-Purpose Multi-Stop Model Describing Consumers' Choices of Shopping Centres
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Recently, a number of interesting extensions to traditional decompositional and discrete choice models has been introduced that allow one to combine parameters estimated in different phases ofcomplex choice processes. These extensions offer new possibilities to model combinations of choices consumers make if they select shopping centres to visit. This paper will introduce a modelling approach that describes consumer choices of shopping centres involving multiple shopping functions (multi purpose) as well as locations (multi stop). The approach extends traditional decompositional models of single choices to a model of combinations of choices. It uses a recursive scaling procedure that combines attributes related to different shopping functions and to shopping centres at different locations. The model will be tested on data collected on shopping behaviour in Maastricht, the Netherlands.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	ddss2004_d-49
id	ddss2004_d-49
authors	Polidori, M. and R. Krafta
year	2004
title	Environment – Urban Interface within Urban Growth
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Developments in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN 90-6814-155-4, p. 49-62
summary	This work presents the synthesis of a model of urban growth dedicated to accomplish simulations of urban spatial dynamics, based on integrated urban and environmental factors and promoting simultaneity among external and internal growth. The city and surrounding environment are captured and modeled in computational ambient, by application of the centrality / potential model (Krafta, 1994 and 1999), with support of graph theory, cellular automata, GIS and geocomputation. The model assumes the city as a field of opportunities for obtaining income, mediated by the space, which is composed of urban and environmental attributes, that work as attractors or as resistances for the urban growth. The space configuration and the distribution of those attributes generate tensions that differentiate qualitatively and quantitatively the space, through the centrality measure (built with the support of graphs techniques), coming to provoke growth in places with larger potential of development (built with the help of techniques of CA – cellular automata). Growths above environmental thresholds are considered problems, generated and overcome in the same process of production of the urban space. Iterations of that process offer a dynamic behaviour to the model, allowing to observe the growth process along the time. The model presents several possibilities: a) urban - natural environment integration; b) internal and external growth integration; c) variety in the scale; d) GIS integration and geocomputation; e) user interface; f) calibration; g) theoretical possibilities; and h) practical possibilities.
keywords	Environment, Urban Growth, Urban Morphology, Simulation
series	DDSS
last changed	2004/07/03 22:13

_id	ddss9493
id	ddss9493
authors	Teldenburg, J.A.F., Timmermans, H.J.P. and Borgers, A.W.J.
year	1994
title	Design Tools in an Integrated Cad-Gis Environment: Space Syntax asan Example
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The focus of this paper is how to make good use of the possibilities offered by integrated CAD-GIS software. It addresses the problem of the difference in types of information required by urban designers and urban planners to perform their tasks. It is stated that there is an overlap in these types of information. Both planners and designers can benefit from the extension of information offered to them by the other party. Integrated CAD-GIS software facilitates the exchange of information. There is a need for implementation in the integrated CAD-GIS environment of a type of information that addresses designers and planners alike. The paper takes Space Syntax models as an example of such information.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9499
id	ddss9499
authors	Waerden, Peter van der and Timmermans, Harry
year	1994
title	Parking Simulation with a Geographical Information System: A Basic Framework
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Nowadays, parking is one of the most important elements of urban transportation and environ-mental planning. It is important to integrate parking planning with for example urban transporta-tion and environmental planning. To do this, a tool in which all these planning activities can be brought together, is essential. A Geographical Information System (GIS) might offer opportunities to combine such activities. It offers possibilities to manipulate, analyze and present data from different kind of databases, and ties different databases directly to some spatial entities. This paper describes a framework for parking simulation, the needs to conduct such a simulation, the tools a GIS offers for this and a hypothetical case to show how a parking simulation modelling can be integrated with G1S-technology.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9409
id	ddss9409
authors	Beekman, Solange and Rikhof, Herman G.A.
year	1994
title	Strategic Urban Planning in the Netherlands
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Since the mid-1980s, several Dutch towns have initiated many urban planning and design activities for their existing area. This represented a shift in that previous urban planning projects typicallyconcerned expansion in the outskirts of the city, or urban renewal. The complex and expensive renovation of the existing housing stock rarely allowed a deep interest in urban design. Since 1985, attention shifted from the housing stock to the city as a whole. Furthermore, public andprivate actors increasingly become involved in the planning process. It became clear that a more comprehensive plan for the whole existing town or region was needed. Conventional planning instruments were considered ill-suited for this new challenge. The paper discusses promising attempts of various urban planning instruments to get a stronger but also more flexible hold on thetransformation of the urban planning area in the Netherlands. These new planning instruments have three common characteristics: (i) they give special attention to the different levels of urban management needed for different urban areas, (ii) these strategic plans provide an integral view on the urban developments, and (iii) these plans introduce a new strategy to deal with both private initiatives to transform urban sites and monitor wishes, proposals, etc. from inhabitants in the neighbourhoods. A comparative analyses of several cities indicates, however, that, in addition to these common characteristics, major differences between their strategic plans exist depending upon their historic patrimonium, economic status and planning tradition.
series	DDSS
email
last changed	2003/08/07 16:36

_id	adb0
authors	Bishop, I.
year	1994
title	The role of visual realism in communicating and understanding spatial change and process
source	Visualization in Geographical Information Systems. H. Hearnshaw and D. Unwin. Chichester, John Wiley & Sons, pp. 60-64
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	28dd
authors	Bridges, Alan
year	1994
title	Architectural Computing Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.v5x
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 226
summary	Many papers at previous eCAADe conferences have discussed CAD curricula, but few have questioned the educational objectives of teaching CAD. I wish to use this short paper to discuss not only what should be taught but why and how it should be taught. Topics covered include: styles of teaching and learning; individual or group working; and principles versus practicalities.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ddss9436
id	ddss9436
authors	Gross, Mark D.
year	1994
title	Indexing the Electronic Sketchbook: Diagrams as Keys to Visual Databases
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The question is how to index a visual database. Consider a visual database -- collection of drawings, three-dimensional models, scanned photographs, video, and text -- as a kind of modernmultimedia architectural sketchbook. It can be shared among a wide group of users with different purposes, and who may think about the contents in rather different ways. The connections -- perhaps hypertext -- among the entries may be complex and the organization difficult to comprehend. How then, to index the collection? Certainly traditional techniques -- looking for a concert hail -- built of concrete and glass -- in the 1970's in Utrecht and the architect's name is H* -- will help. But suppose we do not know so precisely what we are looking for? Might we appeal to the language of diagram? Can we add to our schemes for search and retrieval a diagrammatic index? We propose to try this idea. The paper describes our "computer as cocktail napkin" system for recognizing and interpreting diagrams. It consists of a pen-based freehand sketching program that recognizes simple symbols the user has trained (such as lines, shapes, letters, etc.) and spatial arrangements of these symbols. A graphical search procedure finds occurrences of a drawn configuration of symbols in the pages of a sketchbook made using the program. By extending thepages of the sketchbook to include photos, drawings, and text in addition to diagrams, we can use this technique to find items whose diagrams match a drawn search configuration. The paper will demonstrate this prototype program and explore its use for indexing visualdatabases in architecture.
series	DDSS
email
last changed	2003/08/07 16:36

_id	f42b
id	f42b
authors	Hofmeyer, Herm
year	1994
title	KONSTRUKTIEF ONTWERPEN MET BEHULP VAN COMPUTERPROGRAMMATUUR (1) VERSLAG AFSTUDEERPROJECT (2) BIJLAGE GEBRUIKSAANWIJZING, CODE EN TOELICHTING BIJ PROGRAMMA
source	Technische Universiteit Eindhoven, Department of Architecture, Building and Planning, Structural Design Group
summary	This thesis presents the first basics of an expertsystem to transform a spatial into a structural design. The system thus relates space-allocation techniques and structural design software for stress-engineering. For the implementation Prolog-2 was used. Although in Dutch, the thesis provided background information for more recently written papers for eCAADe (2005) and CAADRIA (2006). The thesis was published as a paper in Design Studies (2006).
keywords	space-allocation; structural design; expert system
series	thesis:MSc
type	normal paper
email
last changed	2006/04/21 07:58

_id	fc3c
authors	Hoppe, H., DeRose, T.D., DuChamp, T., Halstead, M., Jin, H., McDonald, J., Schweitzer, J. and Stuetzle, W.
year	1994
title	Piecewise smooth surface reconstruction
source	A. S. Glassner, (ed), Computer Graphics (Siggraph'94 proc.), Annual Conference Series, pp 295-302, July 1994
summary	We present a general method for automatic reconstruction of accurate, concise, piecewise smooth surface models from scattered range data. The method can be used in a variety of applications such as reverse engineering - the automatic generation of CAD models from physical objects. Novel aspects of the method are its ability to model surfaces of arbitrary topological type and to recover sharp features such as creases and corners. The method has proven to be effective, as demonstrated by a number of examples using both simulated and real data. A key ingredient in the method, and a principal contribution of this paper, is the introduction of a new class of piecewise smooth surface representations based on subdivision. These surfaces have a number of properties that make them ideal for use in surface reconstruction: they are simple to implement, they can model sharp features concisely, and they can be fit to scattered range data using an unconstrained optimization procedure.
series	other
last changed	2003/04/23 15:50

_id	f59d
authors	Koelbl, R., Bruntsch, St. and Knoflacher, H.
year	2003
title	Perspective Vienna – A Comparison of Planning Scenarios and Real Development
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	With the suspension of national boarders in unions of nations, cities and their regions gain in significance for the economic, social and cultural development. This is particularly valid for Vienna, which lies close to the eastern boarder of the European Union, which should fall with the enlargement of EU in the near future. Of prominent importance is therefore to obtain a comprehensive understanding between proposed and defined aims for an urban development, the related measures and their extent ofimplementations and their actual or real effects. This paper attempts to give a strategic analysis of the Viennese urban and traffic development programs, from 1962, 1972, 1984 and 1994, on the one hand, and the data analysis of the statistical year books beginning from 1960 until 2000, on the other. The results show that adjustments have been made not only in response to certain trends, but also to a change of philosophy of urban development. It can be seen that certain assumptions of, for example, economic and transport measures can have the opposite outcome in relation to the intended objectives. Hence, one main question remains to beanswered: How should Vienna deal with the challenges ahead, to secure and foster a sustainable development under such circumstances on a long-term basis. In this respect, some measures are given, which should make it possible to overcome successfully these challenges.
series	other
email
last changed	2003/03/11 20:39

_id	6f5d
authors	Koutamanis, A., Bridges A.H. and Van Loon, P.P.
year	1994
title	C-ad hoc Education
doi	https://doi.org/10.52842/conf.ecaade.1994.039
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 39-42
summary	In the framework of an evolving curriculum we have been developing a series of CAAD exercises aimed at providing the basic knowledge and skills a student needs. The series formed initially a conventional sequence that mapped design stages and corresponded with the gradual development of knowledge and skills. Due to originally practical reasons we are currently relaxing the sequential structure of the CAAD curriculum. This gives us the opportunity to experiment with the integration of the CAAD exercises in the wider design activities of the students, as well as with the structure of the exercises themselves as fully self-contained units.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ddssup9610
id	ddssup9610
authors	Krafta, Romulo
year	1996
title	Built form and urban configuration development simulation
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The "centrality/potential" model, proposed by Krafta (1994), for configurational development, aims at the simulation of inner city built form growth. This is generally achieved by simulating the uneven distribution of floor area increments, resulting from replacement of old buildings, considered "devalued capital" form new ones. The model considers two main variables - public urban space system and built form - and treats them unevenly; the former is extensively disaggregated whereas the latter is not. This feature enables the model to make just a rough account of intra-urban built form development. The issue of built form simulation is then taken further in the following way: a) Urban built form is disaggregated by types. Buildings are classified by a cross combination of scale, purpose, age and quality standard; b) The city is itself considered as a set of intertwined typologic cities. This means that each unit of public space is identified by its dominant built form type, producing a multilayered-discontinuous city. Each one has its own market characteristics: rentability, technological availability and demand size; c) The market constraints determine which layer-city has priority over the others, as well as each one's size of growth. References to rentability and demand size gives each built form type priorities for development d) Spatial conditions, in the form of particular evaluation of centrality and spatial opportunity measures, regulates the distribution of built form increments and typological succession. Locational values, denoted by centrality and spatial opportunity measures, area differently accounted for in each layer-city simulation. e) Simulation is obtained by "running" the model recursively. Each built form type is simulated separately and in hyerarquical order, so that priority and replacement of built form types is acknowledged properly.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9455
id	ddss9455
authors	Kraria, H. and Bridges, Alan
year	1994
title	Building Integration Tools for Collaborative Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	For many years, research in CAAD systems has been mostly oriented towards single environ-ments, thus restricting the designer to a static environment. In reality the activities of user designers constantly interact with other participants activities (i.e. a structural engineer, services engineer, etc.). For instance, the architect is heavily influenced by the nature of the structural engineering process. It defines the character and integration of the basic components in other words, design is a collaborative process carried out by several participants with a single overall objective. The separation of architectural and engineering aspects in building design has brought on isolated computer tools. These tools are not interchangeable, the situation demands for their integration, all the interaction are supported by the social aspect of members of group participa-ting in collaborating work. The benefits of sharing CAD tools and related data between all members of the design team are that everyone works on the same information, co-ordination is easier and more accurate, and there is a reduction in the amount of repetition, as the need to redraw information is eliminated. The result is an increase in the accuracy and speed of the production of drawings. The technological aspects to support collaborative work and in particular the interaction process in design, is the main work issue being carried out at Strathclyde University, Department of Architecture and Building Science, Glasgow, Scotland U.K.
series	DDSS
email
last changed	2003/08/07 16:36

_id	c9ff
authors	Kruft, H.-W.
year	1994
title	A History of Architectural Theory - From Vitruvius to the Present
source	Zwemmer, New York
summary	As the first comprehensive encyclopedic survey of Western architectural theory from Vitruvius to the present, this book is an essential resource for architects, students, teachers, historians, and theorists. Using only original sources, Kruft has undertaken the monumental task of researching, organizing, and analyzing the significant statements put forth by architectural theorists over the last two thousand years. The result is a text that is authoritative and complete, easy to read without being reductive.
series	other
last changed	2003/04/23 15:14

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: