Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 4818

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9415
id	ddss9415
authors	Cajati, Claudio
year	1994
title	Innovative Expert Systems With Hypertextual User Interfaces: A Special Support for the Building Recovering Project
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper, first of all a short account on the peculiarity of knowledge in the domain of Architectural and Building Project, particularly in the Building Recovering Project is given. Thatmeans to focus the concept of "degree of authority" of different types of knowledge with regard to project: regulations; specialist literature having in practice the value of self-regulation; technical updating; exemplary design cases; warnings; analysis methods; heuristics; orientating references. Consequently, the different roles of two basic design & decision support systems, that is expert systems and hypertexts, are considered. The former seem to be quite fit for representing information and knowledge linked to a clear "authority", the one of experts in a certain domain; the latter seem to be quite fit for illustrating the interdisciplinary complexity, different historicinterpretations, various analogous references, and so on. Afterwards, the limits of expert systems based on the logic "true-false" are underlined, and the perspective of expert systems based on more sophisticated and appropriate rules and metarules is proposed. At last, the possible structure of such an innovative expert system, with a hypertextual interface, in the domain of Building Recovering Project is exemplified.
series	DDSS
email
last changed	2003/08/07 16:36

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2638
authors	Choi, Jin Won
year	1994
title	ArchiWAIS: A Multimedia-Based Architectural Information System for Teaching and Learning Architectural History and Theory
doi	https://doi.org/10.52842/conf.acadia.1994.161
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 161-169
summary	Currently, there is a debate among architectural educators regarding the use of computers in the curricula. At present, computers are used for design purposes, and there is limited use in other areas of the curricula. This paper explores an instructional tool developed specifically for the teaching and learning of architectural history and theory, and since these courses are main components of any architectural curricula, using this tool can have a great impact on architectural education in general. The tool, called ArchiWAIS, is a multimedia-based architectural information system that utilizes emerging computer technologies such as multimedia, hypermedia, and telecommunications. As a multimedia system ArchiWAIS provides effective ways of handling various architectural media-text, images, architectural drawings and diagrams, three-dimensional models, animation and sound. ArchiWAIS as a distributed hypermedia system also provides multiple ways to search multimedia databases and browse through multimedia. ArchiWAIS is a WAIS (Wide-Area Information Server) client and has access to architectural databases specially constructed for this experimental project as well as general WAIS databases. ArchiWAIS is one of two subsystems of ArchiTOUR, an educational system currently under development. While ArchiWAIS searches and collects a variety of architectural information, HyperTOUR, the other subsystem of ArchiTOUR, can be used for presenting and learning a specific subject in architectural history and theory. A future extension of ArchiTOUR will be the integration of other curricula into the system, in essence, creating a common ground among architectural courses.
series	ACADIA
last changed	2022/06/07 07:56

_id	ddss9424
id	ddss9424
authors	Dave, Bharat and Schmitt, Gerhard
year	1994
title	Information Systems for Spatial Data
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes a continuing research project aimed at the development of a prototype information system to represent and manipulate models of urban settlements. This inter-disciplinaryproject involves researchers and teachers in the fields of urban design, photogrammetry and CAD. Based upon the requirements identified by the urban design team, the photogrammetry teamused aerial imagery to produce accurate digital models of various features of urban settlements. The models comprise natural features like terrain data, water and vegetation systems, and man made features like transportation networks, land parcels, and built-up volumes. These data are represented in the three dimensions, and they are further linked with nongraphic attributes stored in an external database schemata. The architecture of the system under development has been described previously. In this paper, we focus on the generation of thematic abstractions. The working hypothesis for our current work is that (i) to enable reliable decision-making in urbandesign contexts, we require digital models that are complete and accurate at a certain degree of resolution, and (ii) during various stages in the decision-making, we need useful abstractionswhich encode only the salient information and no more. In more specific terms, we are interested in finding computational means to automatically generate schematic generalizations of data that succinctly represent some information without recomputing or displaying all the vectrs and other details. In this papar we present some of the strategies that we employ to support such operations in our system and also present graphic examples that demonstrate the potential andlimitations of our approach.
series	DDSS
email
last changed	2003/08/07 16:36

_id	27b5
authors	Dießenbacher, Claus and Rank, Ernst
year	1995
title	A Multimedia Archaeological Museum
doi	https://doi.org/10.52842/conf.ecaade.1995.013
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 13-20
summary	This paper will present a project, which was first initiated in 1994 as a graduate students seminar and is now being continued as a research project in a cooperation of computer scientists, architects and archaeologists. An ancient roman city (Colonia Ulpia Traiana near todays Xanten in Germany) has been reconstructed, using various levels of abstraction. On the coarsest level, a 3D-model of the whole city was established, distinguishing between different historical periods of the city. The second level picks places of special interest (temples, the forum, the amphitheater, the townbaths etc.) and reconstructs these buildings or groups of buildings. On the finest level important interior parts or functional details like the Hypocaustae in the town-baths are modelled. All reconstructions are oriented as close as possible to results from excavations or other available documents. All levels of the 3D-model have been visualized using photorealistic images and sequences of video animations. The 3D model is integrated into a multimedia environment, augmenting the visualization elements with plans of the city and individual buildings and with text documents. It is intended, that parts of the outlined system will be available at the site of the ancient city, where today a large public archaeological park is located.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_2.htm
last changed	2022/06/07 07:55

_id	673a
authors	Fukuda, T., Nagahama, R. and Sasada, T.
year	1997
title	Networked Interactive 3-D design System for Collaboration
doi	https://doi.org/10.52842/conf.caadria.1997.429
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 429-437
summary	The concept of ODE (Open Design Environment) and corresponding system were presented in 1991. Then the new concept of NODE. which is networked version of ODE. was generated to make wide area collaboration in 1994. The aim of our research is to facilitate the collaboration among the various people involved in the design process of an urban or architectural project. This includes various designers and engineers, the client and the citizens who may be affected by such a project. With the new technologies of hyper medium, network, and component architecture, we have developed NODE system and applied in practical use of the collaboration among the various people. This study emphasizes the interactive 3-D design tool of NODE which is able to make realistic and realtime presentation with interactive interface. In recent years, ProjectFolder of NODE system, which is a case including documents, plans, and tools to proceed project., is created in the World Wide Web (WWW) and makes hyper links between a 3-D object and a text, an image. and other digital data.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddss9451
id	ddss9451
authors	Kolli, R., Hennessey, J. and Stuyver, R.
year	1994
title	A Conceptual Sketching Device for the Early Phase of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Computer tools are still not popular among designers during early phases of design. Existing mouse-based software applications provide excellent features for constructing precise drawings and illustrations, but they are cumbersome to use during conceptual design phase for rapid free form sketching. We propose a user interface concept for a new pen-based computer device calledIDEATOR. The functions and user interface style for IDEATOR were derived from our studies of industrial designers. Because of its simplicity and ease of use, we believe that the device will beof potential interest to architects, graphic designers, user interface designers and fashion designers as well. We interviewed practising industrial designers and several creative professionals at theirwork places to get an insight into user behaviour and work practices that are characteristic of the initial ideation phase [1]. Based on our observations, we envisaged a schematic user environment where several devices and systems support the various needs of designers. In a focused effort on sketching activity, we studied sketchbooks related to an entire project and video tapes of designers during sketching phase. From these, we derived the functional requirements for a sketching device [2]. In this paper, we describe the conceptual product form and user interface for IDEATOR which is based on LCD tablet technology and cordless electronic pens. We illustrate through our video prototypes, how it could be intuitively used to perform various ideation functions: sketching rapidly in colour, making quick collages of photographs, animating sketches and annotatinganimations or video. We are currently in the process of evaluating the concept prototype with several industrial designers.
series	DDSS
email
last changed	2003/08/07 16:36

_id	6908
authors	Tector, John O. and Thornhill, Cecil M.
year	1994
title	Architectural Courseware - A Network Based MuItimedia System for Design Education
doi	https://doi.org/10.52842/conf.acadia.1994.147
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 147-150
summary	Architectural Courseware is an interactive system which allows for the creative access of a courserelated multimedia database and the interactive manipulation of that database to enhance design education. This project began as a Teaching Initiative Project supported by the Division of Undergraduate Studies of North Carolina State University, Dr. James Anderson, Dean, and has evolved over two phases. Phase One produced an interactive prototype that explored the requirements and technology of multimedia as a support tool for undergraduate education, specifically for an architecture course in the School of Design, The History of Contemporary Architecture. Phase One was well received by various members of the North Carolina State University: faculty members, the Dean of the School of Design, the directors of the Library and the Computing Center, the Associate Provost for Academic Computing, The Provost, and the Dean of Undergraduate Studies. The Dean of Undergraduate Studies was encouraged by the Associate Provost for University Computing to contribute matching funds for the support of Phase Two of the project. Phase Two focused on a functional implementation of a module of the interactive prototype that could be used by students in the Fall '94 semester to test the effectiveness of the courseware concept.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	a8c0
authors	VoB, A.
year	1994
title	Case-based Reasoning in Building Design: Problems of Case Elicitation and Retrieval
source	The Int. Journal of Construction IT 2(4), pp. 49-62
summary	This article deals with a set of problems that arose in the course of the FABEL project in order to build a system assisting in the design of complex buildings: Task analysis indicated a case-based approach with the subtasks of retrieval, assessment and adaptation of layouts. The idea of first choosing a retrieval method which would then guide the further knowledge elicitation process did not work, because there was no single suitable method. We investigated retrieval methods based on keywords, on vectors, bitmaps, gestalten and on topological structures. As it turned out, each method imposes a particular interpretation on a layout and serves different retrieval purposes. Using multiple methods required an open software architecture providing case management facilities for the various methods. Last not least, the extraction of relevant cases from integrated building models is not trivial at all. Both automatic routines of standard cases and manual extraction of special cases should be available.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss9503
id	ddss9503
authors	Wineman, Jean and Serrato, Margaret
year	1994
title	Visual and Spatial Analysis in Office Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The demands for rapid response to complex problems, flexibility, and other characteristics of today's workplace, such as a highly trained work force, have led many organizations to move from strict hierarchical structures to a more flexible project team organization. The organizational structure is broader and flatter, with greater independence given to organizational units, in this case the project teams. To understand the relationship between project team communication patterns and the design and layout of team space, a study was conducted of an architectural office before and after a move to new space. The study involved three project teams. Information was collected on individual communication patterns; perceptions of the ease of communication; and the effectiveness of the design and layout of physical space to support these communications. In order to provide guidance for critical decision-making in design, these communication data were correlated with a series of measures for the specification of team space enclosure and layout. These group/team space measures were adaptations of existing measures of individual work space, and included an enclosure measure, based on an enclosure measure developed by Stokols (1990); a measure of visual field, based on the "isovist" fields of Benedikt (1979); and an "integration" measure, based on the work of Hillier and Hanson (1984). Results indicate both linear and non-linear relationships between interaction patterns and physical space measures. This work is the initial stage of a research program to define a set of specific physical measures to guide the design of supportive work space for project teams and work groups within various types of organizations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	dda4
authors	Yezioro, Abraham
year	1994
title	Form and Performance in Intelligent CAAD Systems for Early Stages in Solar Design Building
source	Technion, Faculty of Architecture and Town Planing, Haifa
summary	Great care should be taken at the initial design stages to determine the principles and solution schemes for climate and energy-conscious buildings. The present study deals with supporting the designer's efforts at the early stages to lay down the appropriate principles for a conceptual and geometric design of energy-preserving buildings, which are also thermally comfortable and adapted to local climatic conditions. For years, especially during the last decade, important data concerning climate-conscious construction has been compiled, but the information has not been utilized by designers, due to its inaccessibility. It is significant, though, that solutions based on this knowledge could be found and assessed at the preliminary design steps. A correct climate-conscious design conceived at the initial stages may guarantee that during later phases of the project's development no problems calling for essential and drastic changes in the basic design will crop up. The meaning of such changes at later stages may require sometimes a redesigning of the entire project. It is vital, therefore, to understand at the pre-conceptual phase, what are the correct climatic-solar design strategies which satisfy the requirements of the local conditions, and enable the attainment of thermal comfort conditions, while consuming the least possible energy. The present study proposes a computer-aided passive solar design system (PASYS) which enables the handling of entire designing process, and its general, conceptual aspects, as well as the preliminary designing steps and their particular, practical aspects. The system is based both on a knowledge base which stores the existing information concerning solar-climatic construction in the form of rules of thumb, and on precise procedural models which enable finding solutions suited to the local climatic conditions. The proposed system is an intelligent CAAD system which equips the designer who is aware of the constraints of climate and energy, with a tool to achieve a better design. PASYS was developed as a universal system to deal with the various activities involved in the initial – pre-conceptual and conceptual - design stages. The system supports the following design activities of each stage of this kind: analysis, synthesis, documentation, assessment and decision making. It is capable of analyzing given conditions, thus helping the designer understand which are the significant preliminary design stages that have a bearing on thermal comfort conditions in a given climate. The system is also capable of proposing solutions corresponding with the particular design phase, and assess their adequacy. These solutions take into account the constraints determined both by the designer and by the system itself, owing to the knowledge base it contains. The system can also document the various solutions that have been found and selected, so that may be further developed at later stages. This documentation is carried out by a graphic interface, developed as part of the system, as well as by an interface devised for existing CAD software. This study highlights the interaction between form and performance. The system is able to assess the performance of a proposed design by considering a given geometry (form), or viceversa, it is able to recommend a solution that can deliver desired and required performances. The study comprises three parts: (a.) Development of the conceptual model of a knowledge based design process. (b.) Further development of the initial stages of the afore mentioned process, including the pre-conceptual and conceptual stages. (c.) Demonstration of the mode of work with the PASYS system. // The first part of the study deals with the definition of the design process, the definition of the various design steps and their characteristics, and the definition of the activities involved in each design step. This part of the work also presents the kinds of knowledge bases affecting the design process, and shows how this knowledge is an inseparable part of the design process. The second part deals with the development of the initial design stages - the pre-conceptual and the conceptual - which are based on knowledge. This part also contains compiled knowledge that is relevant to the design stage, and a knowledge storage and retrieval method that was developed so as to make the knowledge available and accessible on demand. This part further presents precise procedural methods, developed to find solutions adapted to the specific given conditions, and to precisely assess the performance of the proposed solution. A case in point is the module of the SHADING system which enables a precise assessment of the mutual shading of buildings, and an examination of the exposure of the southern elevation to the sun, which is necessary in order to determine the effective solar absorption area in a proposed project in given environment conditions. The third part of the study demonstrates the solar-climatic design process put into action and supported by the system that was developed. This system enables the designer, even at the preliminary design stages, to determine which properties relating to local climatic conditions he will introduce into the building. This important, seemingly natural act, is usually performed during more advanced stages, when it might generate significant changes in the design, at a juncture when changes are hard to make. A PASYS-aided design environment ensures that from the beginning of the designing process, the project will be designed correctly and efficiently as far as energy is concerned.
keywords	Knowledge Base; Design Process; Form; Performance; CAAD Systems
series	thesis:PhD
email
last changed	2003/03/03 11:58

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss9404
id	ddss9404
authors	Arima, Takafumi and Sato, Seiji
year	1994
title	Form Characteristics of Landscape Images: A Landscape Research by Computer Image Processing
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Landscape evaluation research examines how individuals perceive the landscape. Because the amount of the data to describe landscapes is huge, landscape research needs the technology of the computer. This paper describes a method to catch the amount of physical characteristics which were extracted from landscape images by using the technology of the computer image processing and verifies its effectiveness. To do this analysis, we took photographic slides of a landscape sample. Pictures were taken for three regions (the city centre area, the outskirts area, and the farm village area). The number of slides was 6 for each place hence 18 in total were used for theanalysis. Next, we stored these slides on a computer disk. Form characteristics of the landscape elements were extracted by using computer image processing. Borderlines were extracted usingthe algorithm of Robert and were converted into coordinates data by minute line processing and the vector processing. Other elements were extracted by label processing and were converted into the coordinates data by vector processing. These data thus are the vector data for two-dimensions of the image and not the data for a three-dimension space. The processing of these images enables the analysis of the form characteristics in the landscape images. We calculated the data such as appearing length, angle numbers of appearance of the vector data, and analyzed the characteristic of shape and the complexities of landscape applying fractal theory. We compared three districts and were able to find landscape characteristics of various places as a result.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9409
id	ddss9409
authors	Beekman, Solange and Rikhof, Herman G.A.
year	1994
title	Strategic Urban Planning in the Netherlands
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Since the mid-1980s, several Dutch towns have initiated many urban planning and design activities for their existing area. This represented a shift in that previous urban planning projects typicallyconcerned expansion in the outskirts of the city, or urban renewal. The complex and expensive renovation of the existing housing stock rarely allowed a deep interest in urban design. Since 1985, attention shifted from the housing stock to the city as a whole. Furthermore, public andprivate actors increasingly become involved in the planning process. It became clear that a more comprehensive plan for the whole existing town or region was needed. Conventional planning instruments were considered ill-suited for this new challenge. The paper discusses promising attempts of various urban planning instruments to get a stronger but also more flexible hold on thetransformation of the urban planning area in the Netherlands. These new planning instruments have three common characteristics: (i) they give special attention to the different levels of urban management needed for different urban areas, (ii) these strategic plans provide an integral view on the urban developments, and (iii) these plans introduce a new strategy to deal with both private initiatives to transform urban sites and monitor wishes, proposals, etc. from inhabitants in the neighbourhoods. A comparative analyses of several cities indicates, however, that, in addition to these common characteristics, major differences between their strategic plans exist depending upon their historic patrimonium, economic status and planning tradition.
series	DDSS
email
last changed	2003/08/07 16:36

_id	6838
authors	Berberidou-Kallivoka, Liana
year	1994
title	An Open Daylighting Simulation Environment
source	Carnegie Mellon University, Pittsburgh
summary	Various studies have shown that performance simulation tools have not been integrated effec- tively in the architectural design process. The conventional lighting simulation tools have been characterized as decision verification tools rather than design support tools. Particularly in the early design stage, when crucial and often irreversible decisions are made, this evident lack of appropriate lighting simulation environments represents a serious drawback. The "mono-directionality" of the conventional simulation tools can be identified as one of the factors responsi- ble for insufficient integration of computational lighting modeling tools in the design process. In response to this circumstance, this thesis presents the conceptual background and the proto- , typical realization of an "open" daylighting simulation environment (GESTALT) to support architectural lighting design and education. Open simulation environments aim at extension (and inversion) of the design-to-performance mapping mechanisms of the conventional build- ing performance simulation tools. Toward this end, two fully operational versions of GESTALT have been implemented. GESTALT-01 is an explicit implementation based on invertible "fast-response" computational modules. GESTALT-02 is an implicit version that uses a comprehensive computational daylight simulator and investigative projection technique for performance-driven design exploration. Concepts, implementations, case studies, contributions and future directions are presented.
series	thesis:PhD
last changed	2003/02/12 22:42

_id	ddss9410
id	ddss9410
authors	Bodum, Lars
year	1994
title	Hypermedia-aided GIS in Urban Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Town planning in Denmark is undergoing major changes from a planning approach focusing on regulation and individual frameworks for town districts, to a planning approach emphasizing the urban characteristics and drawing overall guidelines for planning. At the same time, attention has shifted to urban renewal and urban remodelling. This means that more qualitative data are needed.These new data types such as digital film, are to form part of a future GIS for the town. The digital film will change the impression of what data can profitably be used in a GIS. Even animations and 3D models, which were previously processed with considerable data power can beplayed as digital films. In the course of the next few years, the most ordinary applications will be able to play digital films and together with the progress made in other media, a development towards hypermedia will be a possibility. The paper will give some examples of how this integration may be carried out. In continuation of the preparation of a municipality atlas and in connection with an EC-subsidized urban renewal project, the municipality of Aalborg has chosen to work outa digital catalog which will in time replace the present local planning regulations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	ddss9414
id	ddss9414
authors	Bright, Elise N.
year	1994
title	THe "Allots" Model: A PC-Based Approach to Demand Distribution for Siting and Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper reports on the development and application of ALLOT: a user-friendly, flexible computer model which has been designed to help governmental jurisdictions and private landowners throughout the world to achieve more economically efficient and environmentally sound land use and development patterns in a short period of time. ALLOT has the potential to drastically change the way that land use planning is conducted, since it has the capability to allow theincorporation of a wide variety of previously ignored environmental characteristics and up-to-date land use patterns. ALLOT, which is written in the SAS programming language, contains twomajor parts. The first part employs a GIS database to conduct land suitability analyses for the area. It then produces maps showing the most suitable areas for various land use types. The second part appears to be unique in the field of computerized land use planning models. It combines the results of the suitability analysis with forecasted demand for various land use types to produce "optimum" future land use patterns. The model is capable of quickly analyzing a wide variety of forecasts, allowing easy comparison of different growth scenarios; and it can also be modified to reflect community goals and objectives, such as protection of wildlife habitat orattraction of industry. The flexibility, combined with the fact that it runs on any IBM-compatible PC (286 or higher), make it a powerful land use planning tool. The model has been successfully applied in two "real world" situations. First, three alternative future land use patterns were developed for a rural lakeside area. The area had rural characteristics and was lacking infrastructure, but a large influx of people was expected as the lake was filled. The success of this effort led to decision to test it´s use as a method for facility siting (using landfill siting as an example).
series	DDSS
last changed	2003/08/07 16:36

_id	0e58
authors	Campbell, D.A. and Wells, M.
year	1994
title	A Critique of Virtual Reality in the Architectural Design Process, R-94-3
source	Human Interface Technology Laboratory, University of Washington, Seattle, USA, http://www.hitl.washington.edu/publications/r-94-3/: 23 May 2001
summary	An addition to a building was designed using virtual reality (VR). The project was part of a design studio for graduate students of architecture. During the design process a detailed journal of activities was kept. In addition, the design implemented with VR was compared to designs implemented with more traditional methods. Both immersive and non-immersive VR simulations were attempted. Part of the rationale for exploring the use of VR in this manner was to develop insight into how VR techniques can be incorporated into the architectural design process, and to provide guidance for the implementers of future VR systems. This paper describes the role of VR in schematic design, through design development to presentation and evaluation. In addition, there are some comments on the effects of VR on detailed design. VR proved to be advantageous in several phases of the design. However, several shortcomings in both hardware and software became apparent. These are described, and a number of recommendations are provided.
series	other
email
last changed	2003/04/23 15:50

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

For more results click below: