Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2955

Reformat results as: short short into frame detailed detailed into frame

_id	0ddb
authors	Linzer, H., Schmidinger, E., Voigt, A. and Walchhofer, H.P.
year	1995
title	Computer Integrated Building-up Planning (CIBP)
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 259-265
summary	Building-up planning holds a prominent position within the planning- and realization process due to its closeness to the constructional-spatial translation. Based on spatial analysis, spatial characteristics and the elaboration of marginal conditions of spatial development within the framework of building-up planning, building volumina, building density, manner of building-up and storeyheights amongst others are to be defined and analyzed as to their spatial impact prior to their realization. The present project has presented possibilities for improvement of planning quality as well as of optimizing clearness and comprehension of the legally binding marginal conditions of building-up planning. Based on the wording of the Austrian Law governing Area Planning building-up planning constitutes an integral part of Urban and Regional planning. Building-up planning is the planning instrument considered right next to putting into reality the effects of which becoming immediately visible in the constructional transfer of frame conditions of spatial development. As a legal instrument it is - due to its overpacked nature - complicated in its practical application and disposes of only a small degree of flexibility concerning its consequences. Thus, a major goal of the research project aims at the development of a building-up plan of a prohibitory - (mandatory) plan acting as an instrument for designing public space.
series	plCAD
email
last changed	2003/05/17 10:01

_id	7a07
id	7a07
authors	Loon, P.P. van
year	1995
title	COMPUTATIONAL & METHODOLOGICAL STUDIES FOR INTERORGANISATIONAL DESIGN IN ARCHITECTURE, BUILDING AND URBAN DEVELOPMENT
source	Oxman, R.M., Bax, M.F.Th., Achten, H.H. (eds.) Design research in the Netherlands, 183-192
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN1995_vanLoon.pdf
last changed	2005/10/12 15:25

_id	6e87
id	6e87
authors	Wognum, P.M. and Mars, N.J.I.
year	1995
title	MODELING KNOWLEDGE FOR KNOWLEDGE-BASED DESIGN SUPPORT
source	Oxman, R.M., Bax, M.F.Th., Achten, H.H. (eds.) Design research in the Netherlands, 97-109
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN1995_Wognum_Mars.pdf
last changed	2005/10/12 15:16

_id	e75d
authors	Achten, H., Dijkstra, J., Oxman, R. and Bax, Th.
year	1995
title	Knowledge-Based Systems Programming for Knowledge Intensive Teaching
doi	https://doi.org/10.52842/conf.ecaade.1995.139
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 139-148
summary	Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered us a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge through the medium of Knowledge-Based Systems programming. It demonstrates how Knowledge-Based Systems offer an appropriate structure for analysing the knowledge required to implement typological design. The class consists of third-year undergraduate students with no extensive previous programming experience. The implementation language is AutoLISP which operates in the AutoCAD environment. The building type used in the course is the office building. in order to become acquainted with both building type and programming in AutoLISP, information and instructions have been gathered and prestructured, including a worked out analysis and AutoLISP code. Office plans are generated through use of the Knowledge-Based System. They are encoded in the form of frames. At the end of the course the students will have learned the basics of Knowledge-Based Systems, have been introduced to programming these systems, have analysed and reflected upon the design process, and gained insight into a specific building type.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_18.htm
last changed	2022/06/07 07:54

_id	a1be
id	a1be
authors	Andel, J. van
year	1995
title	ENVIRONMENT-BEHAVIOR STUDIES AND DESIGN RESEARCH
source	Oxman, R.M., Bax, M.F.Th., Achten, H.H. (eds.) Design research in the Netherlands, 43-47
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN1995_Andel.pdf
last changed	2005/10/12 15:12

_id	e72e
authors	Asaro, N., Corrao, R., Faconti, D., Fiandaca, O., Grifoni, P. and Silvani, A.
year	1995
title	Riesce: An Hypertextual Tool for Browsing Information Produced in the Building Sector by PFEd
doi	https://doi.org/10.52842/conf.ecaade.1995.401
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 401-408
summary	The structure of a set of documents allow for navigation inside single texts. Yet it is often also an obstacle to comparability between different parts and concepts. Even document formatting is only a partial answer to the problem, since it fails to develop the matter of relationships between enunciation and results. It was need to retrieve information about the scientific findings made by Research Units (Operating Units) during the first three year period of the "Progetto Finalizzato Edilizia" (PFEd) for assessment and transfer purposes which led us to design and develop a system to facilitate the retrieval of the relevant information. We chose the building sector for this application because of its relative lack of previous experience of this type, the variety and complexity of documentation available and, last but not least, the general underestimation of research topics and results vis-à-vis the development of the sector. By making the suggestion and information inherent in its findings more available, in terms of method and ambit, as well as more explicit, the research has already achieved a significant result. In view of the prototype character of the experiment, the information will probably be adopted to produce an hypertext on the final results.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_48.htm
last changed	2022/06/07 07:54

_id	c3fa
authors	Barnanente, A., Cuscito, A.P. and Maiellaro, N.
year	1995
title	Expert System and Hypertext for Development Control
doi	https://doi.org/10.52842/conf.ecaade.1995.347
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 347-354
summary	The paper deals with an interactive system based on expert system and hypertext interaction in order to meet the demands of support for local government officials' activity in building-application inspection. Also described are the planning departments context and the problem related to eliciting knowledge in building-inspection process.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_42.htm
last changed	2022/06/07 07:54

_id	ddssar0206
id	ddssar0206
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	2002
title	Faculties of Architecture
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	In order to be inscribed in the European Architect’s register the study program leading to the diploma ‘Architect’ has to meet the criteria of the EC Architect’s Directive (1985). The criteria are enumerated in 11 principles of Article 3 of the Directive. The Advisory Committee, established by the European Council got the task to examine such diplomas in the case some doubts are raised by other Member States. To carry out this task a matrix was designed, as an independent interpreting framework that mediates between the principles of Article 3 and the actual study program of a faculty. Such a tool was needed because of inconsistencies in the list of principles, differences between linguistic versions ofthe Directive, and quantification problems with time, devoted to the principles in the study programs. The core of the matrix, its headings, is a categorisation of the principles on a higher level of abstractionin the form of a taxonomy of domains and corresponding concepts. Filling in the matrix means that each study element of the study programs is analysed according to their content in terms of domains; thesummation of study time devoted to the various domains results in a so-called ‘profile of a faculty’. Judgement of that profile takes place by committee of peers. The domains of the taxonomy are intrinsically the same as the concepts and categories, needed for the description of an architectural design object: the faculties of architecture. This correspondence relates the taxonomy to the field of design theory and philosophy. The taxonomy is an application of Domain theory. This theory,developed by the authors since 1977, takes as a view that the architectural object only can be described fully as an integration of all types of domains. The theory supports the idea of a participatory andinterdisciplinary approach to design, which proved to be awarding both from a scientific and a social point of view. All types of domains have in common that they are measured in three dimensions: form, function and process, connecting the material aspects of the object with its social and proceduralaspects. In the taxonomy the function dimension is emphasised. It will be argued in the paper that the taxonomy is a categorisation following the pragmatistic philosophy of Charles Sanders Peirce. It will bedemonstrated as well that the taxonomy is easy to handle by giving examples of its application in various countries in the last 5 years. The taxonomy proved to be an adequate tool for judgement ofstudy programs and their subsequent improvement, as constituted by the faculties of a Faculty of Architecture. The matrix is described as the result of theoretical reflection and practical application of a matrix, already in use since 1995. The major improvement of the matrix is its direct connection with Peirce’s universal categories and the self-explanatory character of its structure. The connection with Peirce’s categories gave the matrix a more universal character, which enables application in other fieldswhere the term ‘architecture’ is used as a metaphor for artefacts.
series	DDSS
last changed	2003/11/21 15:16

_id	85bd
id	85bd
authors	Bax, M.F.Th.
year	1995
title	FROM IDEOLOGY TO METHODOLOGY: THE THEORETICAL EVOLUTION OF THE DESIGN METHODS GROUP
source	Oxman, R.M., Bax, M.F.Th., Achten, H.H. (eds.) Design research in the Netherlands, 89-94
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN1995_Bax.pdf
last changed	2005/10/12 15:16

_id	d7eb
authors	Bharwani, Seraj
year	1996
title	The MIT Design Studio of the Future: Virtual Design Review Video Program
source	Proceedings of ACM CSCW'96 Conference on Computer-Supported Cooperative Work 1996 p.10
summary	The MIT Design Studio of the Future is an interdisciplinary effort to focus on geographically distributed electronic design and work group collaboration issues. The physical elements of this virtual studio comprise networked computer and videoconferencing connections among electronic design studios at MIT in Civil and Environmental Engineering, Architecture and Planning, Mechanical Engineering, the Lab for Computer Science, and the Rapid Prototyping Lab, with WAN and other electronic connections to industry partners and sponsors to take advantage of non-local expertise and to introduce real design and construction and manufacturing problems into the equation. This prototype collaborative design network is known as StudioNet. The project is looking at aspects of the design process to determine how advanced technologies impact the process. The first experiment within the electronic studio setting was the "virtual design review", wherein jurors for the final design review were located in geographically distributed sites. The video captures the results of that project, as does a paper recently published in the journal Architectural Research Quarterly (Cambridge, UK; Vol. 1, No. 2; Dec. 1995).
series	other
last changed	2002/07/07 16:01

_id	8f0b
authors	Bhavnani, S., Flemming, U., Forsythe, D.E., Garrett, J.H., and Shaw, D.S.
year	1995
title	Understanding and Assisting CAD Users in the Real World
doi	https://doi.org/10.52842/conf.acadia.1995.209
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 209-227
summary	In spite of the rapid increase in functionality and resources provided by CAD systems, productivity growth expected from their use has been difficult to achieve. Although many surveys describe this "productivity puzzle", few studies have been conducted on actual CAD users to understand its causes. In an effort to understand this issue, the first author visited a federal architectural office and observed CAD users in their natural setting using ethnographic techniques developed by cultural anthropologists. This paper describes preliminary results obtained from the study. The study revealed that users had leveled-off in their learning and experimentation and were using the CAD system in sub-optimal ways. The authors argue that this sub-optimal usage occurs because users have limited ways to learn better or different ways of executing tasks. The authors propose that CAD systems should provide active assistance, that is, intervene spontaneously with advice, assistance, and relevant information while the user interacts with the system. They conclude with some issues revealed by the study that should be considered when developing such active assistance.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	653a
id	653a
authors	Brazier, F. and Treur, J.
year	1995
title	DESIGN RESEARCH: EMPIRICAL, FOUNDATIONAL AND DEVELOPMENTAL PERSPECTIVES
source	Oxman, R.M., Bax, M.F.Th., Achten, H.H. (eds.) Design research in the Netherlands, 141-149
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN1995_Brazier_Treur.pdf
last changed	2005/10/12 15:21

_id	276c
authors	Breen, Jack
year	1995
title	Dynamic Perspective: The Media Research Programme
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	This paper focuses on the Research Programme of the Media Sector at the Faculty of Architecture, Delft University of Technology. The media research objectives for the coming years have been brought together with an overall project: “Dynamic Perspective”. The “dynamic” quality may be interpreted both as movement (visual displacement and registration) and as change (the effects of different options). The four projects which together make up this research programme deal with perception (understanding) and conception (designing and imaging) of urban space: “the architecture of the city”. Specific aspects are the effects of primary and secondary spatial boundaries and the systematic structuring of simulation of visual information. The programme will further concentrate on the development and implementation of relevant techniques (besides “traditional” ones such as the drawing and the architectural model, on multimedia techniques such as endoscopy, computer visualization and development of virtual reality systems), both in education and in design practice. By means of analysis, the creation of visual models of choice and the setting up of experiments, the programme aims at the furthering of theoretical knowledge and at acquiring better insights into the effects of design decisions at an urban level, both for designers and for other participants in the design process. Further development of existing laboratory facilities towards a comprehensive Design Simulation Laboratory is an important aspect of the programme. Within the media research process the Aspern location master plan has been considered as a case study, the findings of which will be presented separately in the workshop sessions.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	4931
authors	Breen, Jack
year	1996
title	Learning from the (In)Visible City
doi	https://doi.org/10.52842/conf.ecaade.1996.065
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 65-78
summary	This paper focuses on results and findings of an educational project, in which the participating students had to develop a design strategy for an urban plan by using and combining endoscopic and computational design visualisation techniques. This educational experiment attempted to create a link between the Media research programme titled 'Dynamic Perspective' and an educational exercise in design composition. It was conceived as a pilot study, aimed at the investigation of emerging applications and possible combinations of different imaging techniques which might be of benefit in architectural and urban design education and potentially for the (future) design practice. The aim of this study was also to explore the relationship between spatial perception and design simulation. The point of departure for the student exercise was an urban masterplan which the Dynamic Perspective research team prepared for the workshop 'the (in)visible city' as part of the 1995 European Architectural Endoscopy Association Conference in Vienna, Austria. The students taking part in the exercise were asked to develop, discuss and evaluate proposals for a given part of this masterplan by creating images through different model configurations using optical and computer aided visualisation techniques besides more traditional design media.The results of this project indicate that an active and combined use of visualisation media at a design level, may facilitate communication and lead to a greater understanding of design choices, thus creating insights and contributing to design decision-making both for the designers and for the other participants in the design process.
series	eCAADe
email
more	http://www.bk.tudelft.nl/Media/
last changed	2022/06/07 07:54

_id	a8b4
authors	Bridges, A.H.
year	1997
title	Implications of the Internet for the construction industry
source	Automation in Construction 6 (1) (1997) pp. 45-49
summary	This paper is an adaptation of a section of the Building IT 2005 multimedia CD-ROM (Building IT 2005, Construction IT Forum, Cambridge, 1995). The paper discusses the implications of network technology for the construction industry. Introductory material about the Internet (and links to interesting resources) is included in the publication cited and a much more extensive guide is available in A.H. Bridges, The Construction Net, E. & FN Spon, London 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c05a
authors	Bridges, Alan
year	1995
title	Design Precedents for Virtual Worlds
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 293-302
summary	The usual precedents cited in relation to Cyberspace are William Gibson's book "Neuromancer" and Ridley Scott's film. "Bladerunner". This paper argues that, whilst literature and film are appropriate precedents, there are more suitable sources to refer to when designing virtual worlds. The paper discusses the use of computer modelling in exploring architectonic concepts in three-dimensional space. In doing so it draws on the philosophy of simulation and gives examples from alternative film and literature sources but concludes that one of the most appropriate metaphors is widely available in the form of the television soap opera.
keywords	Design Simulation, Space, Time, Virtual Reality
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	00f4
authors	Brown, Andre G.P. and Knight, Mike
year	1995
title	An Integrated Hypermedia Project
doi	https://doi.org/10.52842/conf.ecaade.1995.111
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 111-116
summary	This paper describes how Hypermedia can be used as unifying tool, marrying together many strands of work related to architectural design and CAD. The project which we describe was undertaken with fourth year students at the University of Liverpool and is entitled the Electronic City. It is founded on the premise of assembling a Hypermedia package which describes the city and its architecture to a lay person. There are two strands to the project, the Hypermedia strand and a graphics/CAD strand. At the end the task was then to stitch the strands together to produce a common, coherent Hypermedia package. At the end of the project we expect that the students will have developed skills and an appreciation of: (-) the architecture and history of the city (-) the design of Hypermedia interfaces (-) the design of Information structures (-) three dimensional modelling and rendering
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_15.htm
last changed	2022/06/07 07:54

_id	7555
authors	Brown, F., Cooper, G., Ford, S., Aouad, G., Brandon, P., Child, T., Kirkham, J., Oxman, R. and Young, B.
year	1995
title	An integrated approach to CAD: modelling concepts in building design and construction
source	Design Studies 16 (3) (1995) pp. 327-347
summary	The ICON project is concerned with the creation of a generic information structure for the construction industry. A central feature of the information model is the use of object-oriented modelling techniques to allow information to be viewed from different 'perspectives' and at different levels of abstraction, according to the requirements of the user. This paper discusses the object modelling of concepts and information in the design area. Drawing on knowledge elicited from protocol analysis of the design activity, a series of interrelated object models has been developed, reflecting different perspectives and abstraction levels within the design domain. Three of these models (spatial design, physical design and structural design) are presented and their implications for the communication and sharing of information discussed.
series	journal paper
last changed	2003/05/15 21:45

_id	913a
authors	Brutzman, D.P., Macedonia, M.R. and Zyda, M.J.
year	1995
title	Internetwork Infrastructure Requirements for Virtual Environments
source	NIl 2000 Forum of the Computer Science and Telecommunications Board, National Research Council, Washington, D.C., May 1995
summary	Virtual environments (VEs) are a broad multidisciplinary research area that includes all aspects of computer science, virtual reality, virtual worlds, teleoperation and telepresence. A variety of network elements are required to scale up virtual environments to arbitrarily large sizes, simultaneously connecting thousands of interacting players and all kinds of information objects. Four key communications components for virtual environments are found within the Internet Protocol (IP) suite: light-weight messages, network pointers, heavy-weight objects and real-time streams. Software and hardware shortfalls and successes for internetworked virtual environments provide specific research conclusions and recommendations. Since large-scale networked are intended to include all possible types of content and interaction, they are expected to enable new classes of interdisciplinary research and sophisticated applications that are particularly suitable for implementation using the Virtual Reality Modeling Language (VRML).
series	other
last changed	2003/04/23 15:50

_id	6378
authors	Burry, M., Prentice, R. and Wood, P.
year	1995
title	Walking Before Running: A Prelude to Multimedia Construction Information
doi	https://doi.org/10.52842/conf.ecaade.1995.257
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 257-266
summary	An inherent problem with creating a multimedia application is generating the mass of information needed in order for it to be comprehensively useful. This is especially true when the subject is building construction for which any informative resource must cover the whole range of the material within its scope from the outset rather than merely be a sampler. Construction studies involve a large and diverse range of ´generic´ or ´model solutions´ which, in an ideal learning situation, are placed in context with historical and contemporary examples to aid a sense of critical evaluation. An obstacle, then, against creating resources dealing with detailed design is the risk that if it is not completed in its entirely there is no useful outcome. This paper also describes the problems and solutions involved in treating this material as data in a generic format so that its future usefulness is not compromised by current needs. It also outlines the programmes written to streamline an otherwise unwieldy process and deal with the inevitable non-conforming output from the participants.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_31.htm
last changed	2022/06/07 07:54

For more results click below: