Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 7024

Reformat results as: short short into frame detailed detailed into frame

_id	5236
authors	Arciszewski, T., Michalski, R.S. and Dybala, T.
year	1995
title	STAR methodology-based learning about construction accidents and their prevention
source	Automation in Construction 4 (1) (1995) pp. 75-85
summary	This paper presents the results of a feasibility study concerning the application of STAR-methodology-basedmachine learning to construction accidents and their prevention. A ten-stage knowledge acquisition process is presented and its individual stages described. Knowledge about construction accidents was acquired using a collection of 225 examples, based on actual accidents records. Inductive learning with a system based on the STAR-methodology was employed. This system was used in both the generalization and specialization modes of operation. The decision rules obtained are complex, but their interpretation is clear and they seem to be consistent with the present understanding of causal relationships between accident results and various factors affecting them. Also, the rules were verified using average overall and omission empirical error rates, which were calculated as average for three randomly determined sequences of examples. These error rates were calculated for all seven steps in the machine learning process, and were used to construct learning curves for both error rates. The relationships between error rates and the number of examples used for learning are analyzed, and coefficients of linear regression given and discussed. The 225 examples used were found to be grossly insufficient to produce reliable knowledge about accidents and therefore a large study is postulated which would involve the collection of a larger number of construction accident records. In general, our study demonstrated the feasibility of machine learning in acquiring knowledge about construction accidents.
keywords	Construction accidents and their prevention; Knowledge acquisition; Machine learning; Multi-stepmachine learning process
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:31

_id	7555
authors	Brown, F., Cooper, G., Ford, S., Aouad, G., Brandon, P., Child, T., Kirkham, J., Oxman, R. and Young, B.
year	1995
title	An integrated approach to CAD: modelling concepts in building design and construction
source	Design Studies 16 (3) (1995) pp. 327-347
summary	The ICON project is concerned with the creation of a generic information structure for the construction industry. A central feature of the information model is the use of object-oriented modelling techniques to allow information to be viewed from different 'perspectives' and at different levels of abstraction, according to the requirements of the user. This paper discusses the object modelling of concepts and information in the design area. Drawing on knowledge elicited from protocol analysis of the design activity, a series of interrelated object models has been developed, reflecting different perspectives and abstraction levels within the design domain. Three of these models (spatial design, physical design and structural design) are presented and their implications for the communication and sharing of information discussed.
series	journal paper
last changed	2003/05/15 21:45

_id	c68b
authors	De Cola, S., La Franca, R., Latona, D. and Parlato, W.
year	1995
title	Hypa - An Hypertext System about the Urban Growth of the City of Palermo
doi	https://doi.org/10.52842/conf.ecaade.1995.021
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 21-28
summary	At the Department of Representation at the University of Palermo an hypertext about the evolution of the city of Palermo has been developed. The system told the events that marked the evolution of the city by images and text. The hypertetx structure allow the reader to paginate the story following different need and/or curiosity. The system is open so it is possible to maintain the data base and to update it with specific contribution (degree thesis or reseurch) or whit the addition of new data related to already developed themes.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_3.htm
last changed	2022/06/07 07:55

_id	27
authors	De Gregorio, R., Carmena, S., Morelli, R.D., AvendaÒo, C. and Lioi, C.
year	1998
title	La Construccion del Espacio del Poder. Museo de la Casa Rosada (The Construction of the Space of Power. Museum of the "Casa Rosada" (Argentinean Presidential House))
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 212-217
summary	The present work is part of the exposition "Francesco Tamburini, La ConstrucciÛn del Espacio del Poder I", exhibited in Rivadavia Cultural Center ( Rosario city), and in Casa Rosada Museum during 1997. The Exposition is based on an investigation program of the space that involves Casa Rosada, determining this space as the first piece of its collection. In 1995, when a group of argentines where visiting the picture gallery Pianetti (Jesi, Italy) there have been found some watercolours of Francesco Tamburini (1846-1890), planner of the main faÁades of the Government and author of many works. These watercolours have great value for architecture, and unknown by public, they have been the starting point of the Exposition. Among these argentines was Roberto De Gregorio architect, historian teacher of this school of architecture, and in charge of the historical investigation. C.I.A.D.'s specific work consists in converting in digital data Casa Rosada's faÁades. The two first stages, already completed, finished on the digital data conversion of facades, in front of Plaza de Mayo and Rivadavia street, with presidential access esplanade. Actually the work is centred on the two facades left and on the elaboration of an electronic model for the edition of a CD-ROM containing the information of the exposition.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	2036
authors	Dzeng, R.J.
year	1995
title	Caseplan: A Case-based Planer and Scheduler for Construction Using Product Modeling
source	University of Michigan
summary	Construction planning and scheduling are important to contractors for estimating the cost and duration of a project they are to bid on and construct. Many projects specify incentive and disincentive clauses for completing projects early and late. The timely completion and success of a project rely on good planning and scheduling. Contractors who repeatedly build the same kind of facilities acquire experience in scheduling the needed construction work. When parts of a facility's design are copied from one project to the next, the previously developed schedules could possibly be reused to schedule future work. This dissertation presents a construction planner and scheduler, named CasePlan, that automates the planning and scheduling process through the use of experience encoded in cases. CasePlan enables a contractor to specify a facility design using a product model, describe the relationships between product components and parts of a schedule (e.g., activity subnetworks, construction crews), and store this information as a case. As a decision support tool, CasePlan enables the contractor to search for cases whose facility designs are similar to that of a new project. The similarity assessment is based on the relative importance values that the contractor assigns to the components and their attributes in the product model. As an automation tool, CasePlan creates the schedule of a new project by reusing parts of the schedules whose associated designs are most similar to that project's design. The result is a schedule in which construction alternatives are chosen from those used in previous cases based on the new project scheduling constraints. The contractor / system-user can interact with CasePlan during its operation or modify the resulting schedule to add detail needed for executing the schedule in the field. Two types of construction projects have been studied for the development of CasePlan. One is the Kit-of-Parts post offices, in which designs are made by reusing design modules defined as Parts. The other is the boiler erection for fossil-fueled power plants, in which the design process is standardized and component configurations are similar across designs. These projects were chosen because their schedules are similar within each project type, which suggested that practitioners had a high incentive and were likely to reuse schedules. CasePlan's similarity assessment for boiler erection projects was validated using a survey. CasePlan's schedules and usability was subjectively evaluated also by the interviewed professionals.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ecaade2022_398
id	ecaade2022_398
authors	Dzurilla, Dalibor and Achten, Henri
year	2022
title	What’s Happening to Architectural Sketching? - Interviewing architects about transformation from traditional to digital architectural sketching as a communicational tool with clients
doi	https://doi.org/10.52842/conf.ecaade.2022.1.389
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 389–398
summary	The paper discusses 23 interviewed architects in practice about the role of traditional and digital sketching (human-computer interaction) in communication with the client. They were selected from 1995 to 2018 (the interval of graduation) from three different countries: the Czech Republic (CR), Slovakia (SR), Netherland (NR). To realize three blending areas that impact the approach to sketching: (I) Traditional hand and physical model studies (1995-2003). (II)Transition form - designing by hand and PC (2004–2017). (III) Mainly digital and remote forms of designing (2018–now). Interviews helped transform 31 “parameters of tools use” from the previous theoretical framework narrowed down into six main areas: (1) Implementation; (2)Affordability; (3)Timesaving; (4) Drawing support; (5) Representativeness; (6) Transportability. Paper discusses findings from interviewees: (A) Implementation issues are above time and price. (B) Strongly different understanding of what digital sketching is. From drawing in Google Slides by mouse to sketching in Metaverse. (C) Substantial reduction of traditional sketching (down to a total of 3% of the time) at the expense of growing responsibilities. (D) 80% of respondents do not recommend sketching in front of the client. Also, other interesting findings are further described in the discussion.
keywords	Architectural Sketch, Digital Sketch, Effective Visual Communication
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	b72a
authors	Ford, S., Aouad, G., Kirkham, J., Brandon, P., Brown, F., Child, T., Cooper, G., Oxman, R. and Young, B.
year	1995
title	An information engineering approach to modelling building design
source	Automation in Construction 4 (1) (1995) pp. 5-15
summary	This paper highlights potential problems in the construction industry concerning the large quantities of information produced and the lack of an adequate information structure within which to coordinate this information. The Information Engineering Method (IEM) and Information Engineering Facility (IEF) CASE tool are described and put forward as a means of establishing an information structure at a strategic level thus providing a framework for the implementation of lower level applications systems. The paper describes how the ICON (Integration/Information for Construction) project at Salford University is establishing and modelling the information requirements for the construction industry at the strategic level. The IEM and IEF are demonstrated using activity, data and interaction models with particular attention being paid to the function of building design within the broader context of design, procurement and the management of construction. Implications for future practice are also discussed.
keywords	Information engineering; CASE tools; Modelling; Integration; Design
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:32

_id	5986
authors	Gamma, E., Helm, R., Johnson, R. and Vlissides, J.
year	1995
title	Design Patterns: Elements of Reusable Object-Oriented Software
source	Reading, MA: Addison-Wesley
summary	The book is an introduction to the idea of design patterns in software engineering, and a catalog of twenty-three common patterns. The nice thing is, most experienced OOP designers will find out they've known about patterns all along. It's just that they've never considered them as such, or tried to centralize the idea behind a given pattern so that it will be easily reusable.
series	other
last changed	2003/04/23 15:14

_id	b04c
authors	Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year	1996
title	Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source	Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary	It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series	other
last changed	2003/04/23 15:50

_id	2115
authors	Ingram, R. and Benford, S.
year	1995
title	Improving the legibility of virtual environments
source	Second Euro graphics Workshop on Virtual Environments
summary	Years of research into hyper-media systems have shown that finding one's way through large electronic information systems can be a difficult task. Our experiences with virtual reality suggest that users will also suffer from the commonly experienced "lost in hyperspace" problem when trying to navigate virtual environments. The goal of this paper is to propose and demonstrate a technique which is currently under development with the aim of overcoming this problem. Our approach is based upon the concept of legibility, adapted from the discipline of city planning. The legibility of an urban environment refers to the ease with which its inhabitants can develop a cognitive map over a period of time and so orientate themselves within it and navigate through it [Lynch60]. Research into this topic since the 1960s has argued that, by carefully designing key features of urban environments planners can significantly influence their legibility. We propose that these legibility features might be adapted and applied to the design of a wide variety of virtual environments and that, when combined with other navigational aids such as the trails, tours and signposts of the hyper-media world, might greatly enhance people's ability to navigate them. In particular, the primary role of legibility would be to help users to navigate more easily as a result of experiencing a world for some time (hence the idea of building a cognitive map). Thus, we would see our technique being of most benefit when applied to long term, persistent and slowly evolving virtual environments. Furthermore, we are particularly interested in the automatic application of legibility techniques to information visualisations as opposed to their relatively straight forward application to simulations of the real-word. Thus, a typical future application of our work might be in enhancing visualisations of large information systems such the World Wide Web. Section 2 of this paper summarises the concept of legibility as used in the domain of city planning and introduces some of the key features that have been adapted and applied in our work. Section 3 then describes in detail the set of algorithms and techniques which are being developed for the automatic creation or enhancement of these features within virtual data spaces. Next, section 4 presents two example applications based on two different kinds of virtual data space. Finally, section 5 presents some initial reflections on this work and discusses the next steps in its evolution.
series	other
last changed	2003/04/23 15:50

_id	5c5f
authors	Jepson, W., Liggett, R. and Friedman, S.
year	1995
title	An environment for real-time urban visualization
source	Proceedings of the Symposium on Interactive 3D Gra hics, Monterey, CA
summary	Drawing from technologies developed for military flight simulation and virtual reality, a system for efficiently modeling and simulating urban environments has been implemented at UCLA. This system combines relatively simple 3-dimensional models (from a traditional CAD standpoint) with aerial photographs and street level video to create a realistic (down to plants, street signs and the graffiti on the walls) model of an urban neighborhood which can then be used for interactive fly and walk-through demonstrations.The Urban Simulator project is more than just the simulation software. It is a methodology which integrates existing systems such as CAD and GIS with visual simulation to facilitate the modeling, display, and evaluation of alternative proposed environments. It can be used to visualize neighborhoods as they currently exist and how they might appear after built intervention occurs. Or, the system can be used to simulate entirely new development.
series	other
last changed	2003/04/23 15:50

_id	55e0
authors	Liggett, R, Friedman, S, and Jepson, W.
year	1995
title	Interactive Design/Decision Making in a Virtual Urban World: Visual Simulation and GIS
source	Proceedings of the Fifteenth Annual ESRI User Conference. Palm Springs, CA, (May)
summary	Researchers at UCLA have developed an Urban Simulator which links virtual reality technology with traditional two-dimensional Geographic Information Systems (GIS) and databases. This paper discusses the data structure and interface requirements necessary to integrate a real-time three-dimensional visual simulation system with a GIS system. Potential uses of the integrated system are illustrated with a set of current projects in the Los Angeles area.
series	other
email
last changed	2003/04/23 15:50

_id	dc71
authors	Liggett, R., Friedmann, S. and Jepson, W.
year	1995
title	Interactive Design/Decision Making in a Virtual Urban World: Visual Simulation and GIS
source	Proceedings of the Fifteenth 1995 ESRI User Conference, Palm Springs, CA, May, 1995
summary	Researchers at UCLA have developed an Urban Simulator which links virtual reality technology with traditional two-dimensional Geographic Information Systems (GIS) and databases. This paper discusses the data structure and interface requirements necessary to integrate a real-time three-dimensional visual simulation system with a GIS system. Potential uses of the integrated system are illustrated with a set of current projects in the Los Angeles area.
keywords	3D City Modeling, Development Control, Design Control
series	other
more	http://www.aud.ucla.edu/%7Erobin/esripaper/p308.html
last changed	2003/02/24 10:56

_id	ddss9464
id	ddss9464
authors	McCartney, Kevin and Ismail, Ashraf Lotfy R. M.
year	1994
title	A Tool for Conceptual Design Evaluation Based on Compliance with Supplementary Planning Guidance and Local Planning Policies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are being designed in order to check design compliance with the requirements of local planning authorities; with regards to building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. The measures to determine proper evaluation will be based upon site-development briefs, and design guides produced by the local planning authorities. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. It will also provide many functions for editing two and three dimensional drawings specifically for the environmental analysis tasks. In addition to the common graphical output of Aut0CAD; i.e. plans, elevations and three dimensional models, the tool will generate textual analysis of the design in report format to use as part of the Environmental Impact Statement of proposed development. The speculative tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out tailor-made for architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of materials for environmental statements. Second, field observation will be carried out to observe the concerned professionals as decision-makers while assessing building design proposals. A prototype will be designed and then tested against the expectations of the tool designer, then the tool performance will be evaluated by a team of professionals participated in the field studies. A critical analysis of the prototype design methodology and the concluding study findings will be documented as part of a postgraduate research thesis to be completed in June 1995.
series	DDSS
last changed	2003/08/07 16:36

_id	781a
authors	Navon, R.
year	1995
title	Conceptual design of a flooring robot: development methodology and results
source	Automation in Construction 4 (3) (1995) pp. 225-238
summary	The paper describes the methodology used in the deveIopment of the Surface Horizontal Autonomous Multipurpose Interior Robot (SHAMIR). The main emphasis in this paper is on the graphic simulation stage, which permits the analysis of parameters normally associated with detailed design, as early as the conceptual design stage. The performance specifications arc described and the conceptual design is specified. The simulation results determined the optimal joint velocity. 10(R) mm/s, and SHAMIR productivity in floor tile setting, at least 6 sq.m/hr., which is three times as high as that of the manual method. These results arc encouraging enough to continue developing the robot, and at the same time they appear to prove the effectiveness of the methodology.
keywords	Construction: Automation; Robotics; Graphic-Simulation; Development
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:27

_id	6fc9
authors	Ponomareva, E., Litvinova A., and Kozakova, R.
year	1995
title	Multimedia and Special Architectural Disciplines
doi	https://doi.org/10.52842/conf.ecaade.1995.169
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 169-176
summary	A person is a wonderful creature. His high organization helps him not only to see and to hear the world around him, but to feel and understand, to condole and pity. A person is a sacramental creature too. His complex organization helps him to see day as light and darkness, as delivery and death, as delight and grief. Every human reaction has biological, physiological and sensitive components. That is why environment is able to call up physical an emotional associations. A human being can "see" sound and "hear" colours. All history of human culture shows that the art can affect man in different ways: unconscious effects, spontaneous associations, general symbolic or specific conventional meanings. That is why architecture can not only protect (a safeguarded aspect), but give knowledge ( an informational aspect) and set up mood (an emotional aspect). And that is why we speak about ambiguity of sense and about multiartistic works. Such as Skriabin's symphony 'Prometheus'. Two scores - musical and colouristic - are connected in this masterpiece. Let us look through two architectural disciplines—from this point of view. The programmes of these disciplines are examples of such embedment. Any architectural discipline demands computer graphics. Any architectural discipline demands multimedia aided teaching, because multimedia in computer designing is a result of human being's complexity and ambivalence.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_22.htm
last changed	2022/06/07 08:00

_id	3f0e
authors	Ponomarieva, E., Litwinova, A. and Kozakova, R.
year	1995
title	Computer Graphics for the Study of Colour Science
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 267-273
summary	There is an absolute dependence between the professional colour culture and the sphere of professional architectural tasks. From the skill to know how to handle brush up to the skill to convey one's own conception to the customer. Colour sketch, polychrom model, means of computer aided design, colour schemes and diagrams, are the means, which modern architect must wield. Actually an architect must think "by colours" from the very beginning of designing and must use colour as a compositional expedient. Architectural colour theory gives the students of the architectural department fundamental rules of colour science and methods of their practical utilization. But today the real designing demands the wider utilization computer of the graphic. There are a lot of remarkable graphic packages, which help architects to wield vector-mode graphic display and roster- mode graphic display, to work with colour and shape. That is why it is necessary to teach students to use the possibility of computer designing in the field of architectural colour science. This task determines the general matter and direction of teaching programme, defines the character and the way of its composition, The teaching programme is adapted for using the graphic package "Corel DRAW-5.0". Students work with a simple set of software tools "Corel DRAW" and at the same time acquire habit of working with the graphic package and decide problems of plane and volume colour simulation. The main practical tasks - colour on perception, psychological influence of colour people, colour harmonies, are performed by the way of "colour modelator". With the help of uncomplicated transformations it helps to receive a necessary set of simple figures for colour exercises.
series	plCAD
last changed	2000/01/24 10:08

_id	7670
authors	Sawicki, Bogumil
year	1995
title	Ray Tracing – New Chances, Possibilities and Limitations in AutoCAD
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 121-136
summary	Realistic image synthesis is nowadays widely used in engineering applications. Some of these applications, such as architectural, interior, lighting and industrial design demand accurate visualization of non-existent scenes as they would look to us, when built in reality. This can only be archived by using physically based models of light interaction with surfaces, and simulating propagation of light through an environment. Ray tracing is one of the most powerful techniques used in computer graphics, which can produce such very realistic images. Ray tracing algorithm follows the paths of light rays backwards from observer into the scene. It is very time consuming process and as such one could not be developed until proper computers appeared, In recent years the technological improvements in computer industry brought more powerful machines with bigger storage capacities and better graphic devices. Owing to increasing these hardware capabilities successful implementation of ray tracing in different CAD software became possible also on PC machines. Ray tracing in AutoCAD r.12 - the most popular CAD package in the world - is the best of that example. AccuRender and AutoVision are an AutoCAD Development System (ADS) applications that use ray tracing to create photorealistic images from 3D AutoCAD models. These ,internal"' applications let users generate synthetic images of threedimensional models and scenes entirely within AutoCAD space and show effects directly on main AutoCAD screen. Ray tracing algorithm accurately calculates and displays shadows, transparency, diffusion, reflection, and refraction from surface qualities of user-defined materials. The accurate modelling of light lets produce sophisticated effects and high-quality images, which these ray tracers always generates at 24-bit pixel depth,"providing 16,7 million colours. That results can be quite impressive for some architects and are almost acceptable for others but that coloured virtual world, which is presented by ray tracing in AutoCAD space in such convincing way, is still not exactly the same as the real world. Main limitations of realism are due to the nature of ray tracing method Classical ray tracing technique takes into account the effects of light reflection from neighbouring surfaces but, leaves out of account the ambient and global illumination arising out of complex interreflections in an environment. So models generated by ray tracing belong to an "ideal" world where real materials and environment can't find their right place. We complain about that fact and say that ray tracing shows us "too specular world", but (...) (...) there is anything better on the horizon? It should be concluded, that typical abilities of today's graphics software and hardware are far from exploited. As was observed in literature there have been various works carried along with the explicit intention of overcoming all these ray tracing limitations, These researches seem to be very promising and let us hope that their results will be seen in CAD applications soon. As it happens with modelling, perhaps the answer will come from a variety of techniques that can be combined together with ray tracing depending on the case we are dealing with. Therefore from the point of view of an architects that try to keep alive some interest on the nature of materials and their interaction with form, "ray tracing" seems to be right path of research and development that we can still a long way follow, From the point of view of the school, a critical assimilation of "ray tracing" processes is required and one that might help to determinate exactly their distortions and to indicate the correct way of its development and right place in CAAD education. I trust that ray tracing will become standard not only in AutoCAD but in all architectural space modelling CAD applications and will be established as a powerful and real tool for experimental researches in architectural design process. Will be the technological progress so significant in the nearest future as it is anticipated?
series	plCAD
last changed	2000/01/24 10:08

_id	f949
authors	Schank, R. and Clery, C.
year	1995
title	Engines for Education
source	Lawrence Erlbaum Associates
summary	Engines is a "hyper-book" written by Roger Schank, Director of ILS, and Chip Cleary, a graduate student of Dr. Schank, about what's wrong with the education system, how to reform it, and especially, about the role of educational technology in that reform.
series	other
last changed	2003/04/23 15:14

For more results click below: