Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 519

Reformat results as: short short into frame detailed detailed into frame

_id	cb18
authors	Belibani, R., Gadola, A. and Marinelli, A.
year	1995
title	Hypervisible Cities: Seville, Barcelona, Lisbon
doi	https://doi.org/10.52842/conf.ecaade.1995.161
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 161-168
summary	The Hypertext 'HYPERVISIBLE CITIES: SEVILLE, BARCELONA, LISBON" was realised within the interuniversity scientific research "La Prodazione dei circuiti multimediali didattici per l'architettura e l'urbanisticai (The production of multimedia didactic circuits for architecture and urban planning), co-ordinator Prof Paola Coppola Pignatelli - Dipartimento di Progettozione Architettonica e Urbana - Facolta di Architettura, Universita "La Sapienza", Roma, Italia. The aim of the research is the representation through the hypermedia tool of the significant of the cities, perceived through their images. The hypertext it has been attempted to make hypervisible three major cities - Seville, Barcelona, Lisbon - through a horizontal/vertical reading, according to three directions of probing, for comparisons purposes among different methods of growth of the city form.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_21.htm
last changed	2022/06/07 07:54

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	695f
authors	Galle, P.
year	1995
title	Towards integrated, intelligent, and compliant computer modeling of buildings
source	Automation in Construction 4 (3) (1995) pp. 189-211
summary	This paper is a survey of current research into computer modeling of buildings. Just as much, however, it is a contribution to a debate on the future of this field of research (and as such expresses the author's opinions, rather than mere facts). It is suggested that more research should be conducted in a top-down "'problem-driven" (rather than in a bottom-up. "technology-driven") manner. As the goal of future research, ten desirable system properties are proposed and grouped together under three headings: integration. intelligence", and compliance. A critical survey of the current state-of-the-art of computer modeling of buildings is given, to assess how far we are from systems with such properties. On that background problems are discussed which are major obstacles to the proposed kind of systems (hence good starting points lot problem-driven research and some ways of approaching these problems are briefly evaluated.
keywords	Computer Modeling of Buildings; Product Modeling: Computer Aided Building Design; Critical Survey; Goal-Setting Debate; Concurrency Control: Integrity Constraint Management; Representation; Complexity of Representations
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 14:47

_id	4a1a
authors	Laird, J.E.
year	2001
title	Using Computer Game to Develop Advanced AI
source	Computer, 34 (7), July pp. 70-75
summary	Although computer and video games have existed for fewer than 40 years, they are already serious business. Entertainment software, the entertainment industry's fastest growing segment, currently generates sales surpassing the film industry's gross revenues. Computer games have significantly affected personal computer sales, providing the initial application for CD-ROMs, driving advancements in graphics technology, and motivating the purchase of ever faster machines. Next-generation computer game consoles are extending this trend, with Sony and Toshiba spending $2 billion to develop the Playstation 2 and Microsoft planning to spend more than $500 million just to market its Xbox console [1]. These investments have paid off. In the past five years, the quality and complexity of computer games have advanced significantly. Computer graphics have shown the most noticeable improvement, with the number of polygons rendered in a scene increasing almost exponentially each year, significantly enhancing the games' realism. For example, the original Playstation, released in 1995, renders 300,000 polygons per second, while Sega's Dreamcast, released in 1999, renders 3 million polygons per second. The Playstation 2 sets the current standard, rendering 66 million polygons per second, while projections indicate the Xbox will render more than lOO million polygons per second. Thus, the images on today's $300 game consoles rival or surpass those available on the previous decade's $50,000 computers. The impact of these improvements is evident in the complexity and realism of the environments underlying today's games, from detailed indoor rooms and corridors to vast outdoor landscapes. These games populate the environments with both human and computer controlled characters, making them a rich laboratory for artificial intelligence research into developing intelligent and social autonomous agents. Indeed, computer games offer a fitting subject for serious academic study, undergraduate education, and graduate student and faculty research. Creating and efficiently rendering these environments touches on every topic in a computer science curriculum. The "Teaching Game Design " sidebar describes the benefits and challenges of developing computer game design courses, an increasingly popular field of study
series	journal paper
last changed	2003/04/23 15:50

_id	a8d1
authors	Galle, Per
year	1981
title	An Algorithm for Exhaustive Generation of Building Floor Plans
source	Communications of the ACM December, 1981. vol. 2: pp.813-823, [3] : ill. includes bibliography.
summary	The combinatorial complexity of most floor plan design problems makes it practically impossible to obtain a systematic knowledge of possible solutions using pencil and paper. The objective of this paper is to contribute to the development of computer methods providing such knowledge for the designer. The paper describes an algorithm which generates all possible rectangular plans on modular grids with congruent cells, subject to constraints on total area, room areas, wall lengths, room adjacencies, and room orientations. To make room sizes regular and limit the solution set only, such grids are used which minimize the number of cells in the smallest room. The description is sufficiently detailed to serve as a basis for programming. Test results for a Pascal implementation of the algorithm are reported. Realistic problems up to ten rooms have been solved in modest length of computer time. The results indicate that the approach of exhaustive generation may prove to be more fruitful than generally assumed
keywords	architecture, floor plans, automation, design, planning, algorithms, combinatorics, grids, constraints, synthesis
series	CADline
last changed	1999/02/12 15:08

_id	620a
authors	Galle, Per
year	1983
title	A Theorem Relating to Exhaustive Generation of Floor Plans
source	Bulletin of Computer Aided Architectural Design. May, 1983. pp. 30-33 : ill
summary	Many problems arise in connection with automated design of architectural floor plans. If modular grids are used, one problem is to avoid repeated generation of the same plan on different modular grids. Using the concept of 'modular complexity,' the paper presents and proves a theorem which offers a solution to this problem
keywords	automation, design, planning, architecture, floor plans, grids, search, synthesis
series	CADline
last changed	1999/02/12 15:08

_id	a666
authors	Galle, Per
year	1986
title	Abstraction as a Tool of Automated Floor-Plan Design
source	Environment and Planning B: Planning and Design. 1986. vol. 13: pp. 21-46 : ill. includes bibliography
summary	The automated design of architectural floor plans satisfying given topological and dimensional constraints is a challenging field of research. In this paper ABSTRACTION is pointed out as an important conceptual tool of this field. A critical discussion of existing plan-design methods leads to the conclusion that the potentials of abstraction as a tool have not yet been fully recognized. The rest of the paper is an attempt to improve this situation by suggesting a new approach to automated floor-plan design. Theoretically, design is viewed as a one-to-many relation; a tree whose lines are directed from the root (the problem) towards the leaves (the solutions). Abstraction is viewed as the inverse many-to-one relation. A particular relation of abstraction is defined, such that the intermediate nodes of the tree (between root and leaves) are themselves floor plans, but are less detailed than the solutions. From the study of this concept of abstraction, it is concluded that the design algorithm based on it is likely to have certain useful properties
keywords	layout, automation, design, architecture, floor plans, abstraction
series	CADline
last changed	1999/02/12 15:08

_id	a7c1
authors	Galle, Per
year	1987
title	A Basic Problem Definition Language for Automated Floor Plan Design
source	113 p. 1987. DIKU Research Report No. 87/4
summary	CADLINE has abstract only. Algorithms for automated floor plan design need a machine- readable description of properties of the desired floor plans. In this report BPDL ('Basic Problem Definition Language'), a rudimentary language for stating such descriptions, is developed. The development is based on a discussion of pragmatic aspects of possible features of the language. The resulting language is described by formal definitions of syntax and semantics, accompanied by informal explanations. Finally, experiments with a floor plan design algorithm that supports BPDL are reported and it is concluded that even a rudimentary language like BPDL can describe relatively non- trivial floor plan layouts, provided a set of geometrical primitives, attributes and relations that make up the language are carefully chosen. Further research along the lines of BPDL is suggested, and the importance of a systematic approach to development of future specification languages for architectural design is stressed
keywords	architecture, floor plans, design, attributes, relations, semantics, algorithms, synthesis, planning, languages
series	CADline
last changed	1999/02/12 15:08

_id	801f
authors	Galle, Per
year	1987
title	Branch & Sample : Systematic Combinatorial Search without Optimization
source	73 p. 1987. DIKU Research Report No. 87/5. CADLINE has abstract only
summary	Many constraint satisfaction problems are combinatorically explosive, i.e. have far too many solutions. Optimization techniques may help in selecting solutions for consideration, but a reasonable measure of optimality is not always at hand. The branch & sample algorithm is presented as an alternative to optimization. If the constraints themselves limit the solution set sufficiently, the algorithm finds all solutions, but otherwise a suitable number of solutions (determined by the user) is generated, such that each new solution has a maximal distance to those already generated. The distance measure used is a so called ultrametric distance expressible in terms of the search tree: solutions are viewed as m-tuples of fixed length, each of whose m decision variables corresponds to a level in the search tree. The distance between two solutions is the number of edges from their leaf nodes to the closest common predecessor node in the tree. For problems whose decision variables depend on each other (as is often the case) the set of solutions generated in this way corresponds well to the intuitive notion of a 'representative sample.' The principles of Branch & Sample are first introduced informally, then the algorithm is developed by stepwise refinement, and two examples of its use are given. A fully tested application-independent implementation of the algorithm in C is given as an appendix
keywords	algorithms, combinatorics, search, constraints, floor plans, layout, synthesis, architecture
series	CADline
last changed	1999/02/12 15:08

_id	2ac0
authors	Galle, Per
year	1987
title	A Formalized Concept of Sketching in Automated Floor Plan Design
source	177 p. 1987. DIKO Research Report No.87/3
summary	CADLINE has abstract only. Automated floor plan design, though originally motivated by the difficulties encountered by architects manually designing building layouts, raise several questions that may be of relevance to related application areas as well. e.g. design of electronic circuitry. One such question is, 'how do we come from a given set of constraints on size and placement of rooms (components) to a set of floor plans (circuit layouts) that satisfy these constraints?' In manual architectural design, sketches are used as an intermediate step. The present work is a study of a number of formalizations of the sketch concept which have been or could be used in computer- generation of architectural floor plans. A particular type of sketch, called the 'delta-derivative', is suggested and developed. The delta-derivative of a desired solution plan is an approximation of that solution plan and usually several other similar or 'equivalent' solutions. The idea is to generate sketches ('abstract' plans) before solutions ('concrete' plans), because they are simpler to compute, weeding out sketches that are not 'promising', and trying to refine the remaining sketches into solutions proper, thus limiting the amount of combinatorial search. Several abstraction levels of sketches may be used in this process. However, constraints as specified by the user of an automated design system are assumed to apply to the solutions; therefore a major theoretical problem which is addressed in the report is the derivation of sketch-level constraints that define which sketches to be generated. A comprehensive floor plan design system based on these ideas has been implemented, and empirical results are reported which confirms certain predicted advantages of delta-derivatives but also shows that the sketch-level constraints based on the developed theory are too weak if used alone; they allow generation of too many sketches which cannot possibly be refined into solutions. The report finally conjectures a solution to this problem
keywords	CAD, planning, architecture, floor plans, design, combinatorics, programming, abstraction
series	CADline
last changed	1999/02/12 15:08

_id	a9b9
authors	Galle, Per
year	1989
title	Computer Methods in Architectural Problem Solving : Critique and Proposals
source	Journal of Architectural and Planning Research. Spring, 1989. vol. 6: pp. 34-54 : ill. includes bibliography
summary	While the development of modelling and drafting tools for computer-aided design has reached a state of considerable maturity, computerized decision support in architectural sketch design is still in its infancy after more than 20 years. The paper analyzes the difficulties of developing computer tools for architectural problem solving in the early stages of design where decisions of majors importance are made. The potentials of computer methods are discussed in relation to design as a static system of information, and to design as a creative process. Two key problems are identified, and on this background current computer methods intended for use in architectural sketch design are critically reviewed. As a result some guidelines are suggested for future research into computer-aided architectural problem solving. The purpose of the paper is twofold: (1) to encourage research that will take this field into a state of maturity and acceptance by practitioners, and (2) to provoke further debate on the question of how to do it
keywords	architecture, CAD, design process, information, problem solving
series	CADline
last changed	1999/02/12 15:08

_id	e832
authors	Galle, Per
year	1989
title	Branch & Sample : A Simple Strategy for Constraints Satisfaction
source	March, 1989. 29: pp. 395-408 : ill. includes bibliography
summary	Many constraint satisfaction problems have too many solutions for exhaustive generation. Optimization techniques may help in selecting a small number of solutions for consideration, but a reasonable measure of optimality is not always at hand. A simple algorithm called Branch & Sample is suggested as an alternative to optimization. Combining breath-first and depth- first search Branch & Sample finds solution distributed over the search tree. The aim is to obtain a limited set of solutions that corresponds well to the intuitive motion of a representative, uniformly scattered sample. A precise definition of this notion is discussed in relation to the algorithm whose effect is illustrated by two geometric design problems. The performance of the algorithm is evaluated and it is concluded that Branch & Sample is applicable to certain types of problems, and refinements can extend the scope of application
keywords	automation, design, constraints, backtracking
series	CADline
last changed	1999/02/12 15:08

_id	e3c7
authors	Galle, Per
year	1989
title	Computer Methods in Architectural Problem Solving: Critique and Proposals
doi	https://doi.org/10.52842/conf.ecaade.1989.x.t9u
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 6.4.1-6.4.21
summary	While the development of modeling and drafting tools for computer-aided design has reached a state of considerable maturity, computerized decision support in architectural sketch design is still in its infancy after more than 20 years. The paper analyzes the difficulties of developing computer tools for architectural problem solving in the early stages of design where decisions of major importance are made. The potentials of computer methods are discussed in relation to design as a static system of information and to design as a dynamic creative process. Two key problems are identified, and on this background current computer methods intended for use in architectural sketch design are critically reviewed. As a result some guidelines are suggested for future research into computer- aided architectural problem solving. The purpose of the paper is twofold: (1) to encourage research that will take this field into a state of maturity and acceptance by practitioners, and (2) to provoke further debate on the question of how to do it.
series	eCAADe
last changed	2022/06/07 07:50

_id	439f
authors	Galle, Per
year	1990
title	A language of Abstract Floor Plans
source	Environment and Planning B: Planning and Design. 1990. vol. 17: pp. 173-204 : ill. includes bibliography
summary	Theoretical and experimental results from the implementation of a system for computer-aided floor-plan design are reported. The system is based on a potentially exhaustive search for solutions that satisfy user-specified constraints, but the paper concentrates on techniques for limiting and guiding the search. The emphasis is on two aspects of floor-plan design: the use of a formalized concept of sketching, and the language in which design constraints are specified by the user. A well-defined concept of abstract draft plans is achieved by limiting corner coordinates to intervals, rather than single numbers. Mathematical properties of draft and their defining constraints as derived from the user's constraints are outlined, and the role of drafts in computer- aided floor plan design is investigated and illustrated by examples. The specification language is based on a small set of primitives whose combined power of expression is also illustrated. The syntax and semantics of the language are formally defined (in two appendices), and the importance of careful development of languages for future design automation is pointed out
keywords	floor plans, design, CAD, architecture, automation, synthesis, combinatorics, layout
series	CADline
last changed	1999/02/12 15:08

_id	84e1
authors	Kovacs, Laszio Bela and Galle, Per
year	1990
title	Logic Programming for Concept Modelling and Support of Urban Housing Design : A Pilot Study
source	1990. 134 p. CADLINE has abstract only
summary	Starting from a case study of manual sketch design of a residential area, the authors develop a prototypical site plan for low to medium density housing. The layout keeps pedestrian and vehicular traffic separated and provides open green area as well as a concentrated urban atmosphere. The constituents of the prototype layout are identified and a system of concepts devised accordingly. This conceptual analysis is formalized, using a Horn clause logic notation. Aspects of the resulting logic model concerning design of walking lines and plazas are refined into a considerable amount of detail. This exercise in knowledge representation seems to indicate that it will be possible, within the logic programming paradigm, to implement computerized support systems able to cooperate with and simulate designers working with architectural design. The main result of the study is that logical analysis of a particular prototype design can result in a collection of quite general concepts which are potentially useful in many other context than that of the prototype, for other kinds of design tasks. The report concludes by recommending several lines or aspects of future research in this area
keywords	architecture, design, logic, programming, knowledge base, systems, CAD, layout, prototypes
series	CADline
last changed	2003/06/02 10:24

_id	41e5
authors	Abendroth, M., Decock, J. and Mestaoui, N.
year	2000
title	O_1:// the hypertextu(r)al matrix
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 75-76
summary	Founded in 1995 LAB[au], laboratory for architecture and urbanism, links theoretic research LAB[a+u] to concrete works of conception and realisations LA.BAU. LAB[au] elaborates a “hyperdesign” investigating the implications of new technologies of communication and computation in spatiotemporal and social processes and their forms of representation as architecture and urbanism. The transposition of the hypertext model to architectural and urban concepts question the mutation of the spatial and semantic construct of space. The definition of architecture as a code is based on “glocal” systems according to the processes of computation and communication.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	e75d
authors	Achten, H., Dijkstra, J., Oxman, R. and Bax, Th.
year	1995
title	Knowledge-Based Systems Programming for Knowledge Intensive Teaching
doi	https://doi.org/10.52842/conf.ecaade.1995.139
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 139-148
summary	Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered us a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge through the medium of Knowledge-Based Systems programming. It demonstrates how Knowledge-Based Systems offer an appropriate structure for analysing the knowledge required to implement typological design. The class consists of third-year undergraduate students with no extensive previous programming experience. The implementation language is AutoLISP which operates in the AutoCAD environment. The building type used in the course is the office building. in order to become acquainted with both building type and programming in AutoLISP, information and instructions have been gathered and prestructured, including a worked out analysis and AutoLISP code. Office plans are generated through use of the Knowledge-Based System. They are encoded in the form of frames. At the end of the course the students will have learned the basics of Knowledge-Based Systems, have been introduced to programming these systems, have analysed and reflected upon the design process, and gained insight into a specific building type.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_18.htm
last changed	2022/06/07 07:54

_id	6cb2
authors	Af Klercker, Jonas
year	1995
title	Architects Early Sketching on Computer Using Multimedia
doi	https://doi.org/10.52842/conf.ecaade.1995.247
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 247-256
summary	This paper presents a development work which aims at practical applications of ideas built on experiences in practise and education and the theoretical development in the BAS.CAAD project. The important difference between BAS.CAAD and CAD programs of today is the possibility to handle user organisation, building design and site in the same program. This means that design today has to be done in at least 3 separate programs with different ways of defining objects. It is then a computer technical problem to mix and study the relations between objects of separate origin. In a recent project our method to overcome this difficulty in CAAD computing was using a Multimedia program making visual simulations to analyse consequences of form etc. As the process went on and forms where more concrete it was possible to make simulations worth showing and discussing to involve colleagues, clients and users.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_51.htm
last changed	2022/06/07 07:54

_id	0c8e
authors	Ager, Mark Thomas and Sinclair, Brian R.
year	1995
title	StereoCAD: Three Dimensional Representation
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 343-355
summary	Concepts of stereoscopic vision have been around for more than two thousand years. Despite this long history, its application to the field to architecture and design seems relatively unexplored. Synthesis of two technologies, the stereoscope and the computer, was the focus of the present study. The goal of the research was to determine if computer-generated stereoscopic pairs hold value for architectural design. Using readily available computer technology (Apple Macintosh) the research team modelled and rendered an existing project to verify the degree of correlation between the physical construct, the computer 3D model and resultant correlation between the physical construct, the computer 3D model and resultant rendered stereo-paired representation. The experiments performed in this study have shown that producing stereo-paired images that highly correlate to reality is possible using technology that is readily available in the marketplace. Both the technology required to produce (i.e., personal computer and modelling/rendering software) and view (i.e., modified stereoscope) the images is unimposing. Both devices can easily fit in a studio or a boardroom and together can be utilized effectively to permit designers, clients and end-users to experience proposed spaces and projects. Furthermore, these technologies are familiar (clients and end-users have already experienced them in other applications and settings) and assume a fraction of the cost of more dynamic, immersive virtual reality systems. Working from this base, limitations of the process as well as future applications of computer-generated stereoscopic images are identified.
keywords	Stereovision, Representation, Computers, Architects, Design
series	CAAD Futures
last changed	2003/11/21 15:15

For more results click below: