Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 705

Reformat results as: short short into frame detailed detailed into frame

_id	fa87
authors	Kurmann, David
year	1995
title	Sculptor - A Tool for Intuitive Architectural Design
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 323-330
summary	To manage the complexity in three-dimensional modelling and design in architecture, new approaches and methods are needed in computer based design tools. This paper identifies key factors in designing with computers and presents a computer program called 'Sculptor' for intuitive and direct virtual modelling in architecture. The program focuses on new methods for design in the early stages such as conceptual and abstract designs for massing studies.
keywords	Architectural Design., User Interface, Virtual Reality, Distributed Modelling, Intelligent Agents
series	CAAD Futures
last changed	1999/08/03 17:16

_id	0128
authors	Engeli, M., Kurmann, D. and Schmitt, G.
year	1995
title	A New Design Studio: Intelligent Objects and Personal Agents
doi	https://doi.org/10.52842/conf.acadia.1995.155
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 155-170
summary	As design processes and products are constantly increasing in complexity, new tools are being developed for the designer to cope with the growing demands. In this paper we describe our research towards a design environment, within which different aspects of design can be combined, elaborated and controlled. New hardware equipment will be combined with recent developments in graphics and artificial intelligence programming to develop appropriate computer based tools and find possible new design techniques. The core of the new design studio comprises intelligent objects in a virtual reality environment that exhibit different behaviours drawn from Artificial Intelligence (AI) and Artificial Life (AL) principles, a part already realised in a tool called 'Sculptor'. The tasks of the architect will focus on preferencing and initiating good tendencies in the development of the design. A first set of software agents, assistants that support the architect in viewing, experiencing and judging the design has also been conceptualised for this virtual design environment. The goal is to create an optimised environment for the designer, where the complexity of the design task can be reduced thanks to the support made available from the machine.
keywords	Architectural Design, Design Process, Virtual Reality, Artificial Intelligence, Personal Agents
series	ACADIA
email
last changed	2022/06/07 07:55

_id	14b5
authors	Fang, Lian and Gossard, David C.
year	1995
title	Multidimensional curve fitting to unorganized data points by nonlinear minimization
source	Computer-Aided Design, Vol. 27 (1) (1995) pp. 48-58
summary	Many papers have addressed the problem of fitting curves to data points. However, most of the approaches are subject to a restriction that the data points must be ordered.The paper presents a method for generating a piecewise continuous parametric curve from a set of unordered and error-filled data points. The resulting curve not only providesa good fit to the original data but also possesses good fairness. Excluding the endpoints of the curve, none of the connectivity information needs to be specified, thuseliminating the necessity of an initial parameterization. The standard regularization method for univariate functions is modified for multidimensional parametric functions andresults in a nonlinear minimization problem. Successive quadratic programming is applied to find the optimal solution. A physical model is also supplied to facilitate anintuitive understanding of the mathematical background.
keywords	Data Interpolation, Regularization, Nonlinear Minimization
series	journal paper
last changed	2003/05/15 21:33

_id	6b82
authors	Week, David
year	1995
title	The Database Revisited: Beyond the Container Metaphor
doi	https://doi.org/10.52842/conf.acadia.1995.053
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 53-70
summary	The growth of international networks, and of international trade in general, has increased the opportunities for architects to work together over distance. In our practice at Pacific Architecture, we’ve been using first modems, and now the Internet, to connect co-workers at sites in Australia, Oregon, Scotland, and Papua New Guinea. Design collaboration has been primarily through the e-mail exchange of text and drawings. We’ve also assessed other CMC tools. Products like Timbuktu and video-conferencing software allow for real-time collaboration, based on the metaphor of two (or more) people together at a table, able to see and hear each other, and to work together on the same document. Groupware make intragroup communication the basis for building a workgroup’s knowledgebase. On recent projects, we’ve begun using database software as the basis for collaborative design communication. We’ve taken as a model for data structure Christopher Alexander’s ‘pattern language’ schema. Conversations about the design take the form of a collaborative construction of the language. Inputs into the database are constrained by the ‘pattern’ format. The CAD drawings run in parallel, as an ‘expression’ or ‘instance’ of the language. So far, CAD and database do not have an integrated interface. This paper describes our experience in these projects. It also outlines a set of design criteria for an integrated CAD/database environment economically and incrementally achievable within the constraints of currently available software. Formulating such criteria requires the reconceptualisation of notions of ‘database’. This paper looks at these notions through philosophical and linguistic work on metaphor. In conclusion, the paper analyses the way in which we can use a reframed notion of database to create a useful collaborative communication environment, centred on the architectural drawing.
series	ACADIA
last changed	2022/06/07 07:58

_id	ddssar9609
id	ddssar9609
authors	Engeli, Maia and Kurmann, David
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to expe-rience rooms and 31) input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 31) model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	DDSS
last changed	2003/08/07 16:36

_id	cfad
authors	Kurmann, David
year	1998
title	Sculptor - How to Design Space?
doi	https://doi.org/10.52842/conf.caadria.1998.317
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 317-326
summary	Architects face a significant lack of computer tools that truly support them in the early, conceptual stages of design. In this paper, we take a look at the reasons for that and propose some solutions. We introduce new human-machine interaction methods that do differ from construction based approaches. We define new spatial interface paradigms as well as new objects and their behavior. Finally we present their implementation in ‘Sculptor’ - a modeling prototype to enable designing in space with space.
keywords	Spatial Modeling, Human Computer Interface, Cooperative Design
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:52

_id	6384
authors	Kurmann, David
year	1999
title	Informotion: Dynamic Representation of Information Structures
doi	https://doi.org/10.52842/conf.caadria.1999.133
source	CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 133-141
summary	Information is everywhere. We are flooded by information and one can observe peoples problems handling the amount of information. The relational table as the mean to present information as well as simple html pages are having their obvious depts. Therefore, people are looking into three-dimensional representations and entire virtual environments to visualize data contents. Within this papers it is proposed to visualize information and information structures in a dynamic fashion. Therefore, we will have a look at some principles of dynamic representations as well as the metaphors and methods used to enables dynamic representations. With Autonomous Objects in Sculptor and inforMotion two examples are implemented in our research projects using dynamic data visualization.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	41e5
authors	Abendroth, M., Decock, J. and Mestaoui, N.
year	2000
title	O_1:// the hypertextu(r)al matrix
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 75-76
summary	Founded in 1995 LAB[au], laboratory for architecture and urbanism, links theoretic research LAB[a+u] to concrete works of conception and realisations LA.BAU. LAB[au] elaborates a “hyperdesign” investigating the implications of new technologies of communication and computation in spatiotemporal and social processes and their forms of representation as architecture and urbanism. The transposition of the hypertext model to architectural and urban concepts question the mutation of the spatial and semantic construct of space. The definition of architecture as a code is based on “glocal” systems according to the processes of computation and communication.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	e75d
authors	Achten, H., Dijkstra, J., Oxman, R. and Bax, Th.
year	1995
title	Knowledge-Based Systems Programming for Knowledge Intensive Teaching
doi	https://doi.org/10.52842/conf.ecaade.1995.139
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 139-148
summary	Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered us a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge through the medium of Knowledge-Based Systems programming. It demonstrates how Knowledge-Based Systems offer an appropriate structure for analysing the knowledge required to implement typological design. The class consists of third-year undergraduate students with no extensive previous programming experience. The implementation language is AutoLISP which operates in the AutoCAD environment. The building type used in the course is the office building. in order to become acquainted with both building type and programming in AutoLISP, information and instructions have been gathered and prestructured, including a worked out analysis and AutoLISP code. Office plans are generated through use of the Knowledge-Based System. They are encoded in the form of frames. At the end of the course the students will have learned the basics of Knowledge-Based Systems, have been introduced to programming these systems, have analysed and reflected upon the design process, and gained insight into a specific building type.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_18.htm
last changed	2022/06/07 07:54

_id	6cb2
authors	Af Klercker, Jonas
year	1995
title	Architects Early Sketching on Computer Using Multimedia
doi	https://doi.org/10.52842/conf.ecaade.1995.247
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 247-256
summary	This paper presents a development work which aims at practical applications of ideas built on experiences in practise and education and the theoretical development in the BAS.CAAD project. The important difference between BAS.CAAD and CAD programs of today is the possibility to handle user organisation, building design and site in the same program. This means that design today has to be done in at least 3 separate programs with different ways of defining objects. It is then a computer technical problem to mix and study the relations between objects of separate origin. In a recent project our method to overcome this difficulty in CAAD computing was using a Multimedia program making visual simulations to analyse consequences of form etc. As the process went on and forms where more concrete it was possible to make simulations worth showing and discussing to involve colleagues, clients and users.
series	eCAADe
email
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_51.htm
last changed	2022/06/07 07:54

_id	0c8e
authors	Ager, Mark Thomas and Sinclair, Brian R.
year	1995
title	StereoCAD: Three Dimensional Representation
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 343-355
summary	Concepts of stereoscopic vision have been around for more than two thousand years. Despite this long history, its application to the field to architecture and design seems relatively unexplored. Synthesis of two technologies, the stereoscope and the computer, was the focus of the present study. The goal of the research was to determine if computer-generated stereoscopic pairs hold value for architectural design. Using readily available computer technology (Apple Macintosh) the research team modelled and rendered an existing project to verify the degree of correlation between the physical construct, the computer 3D model and resultant correlation between the physical construct, the computer 3D model and resultant rendered stereo-paired representation. The experiments performed in this study have shown that producing stereo-paired images that highly correlate to reality is possible using technology that is readily available in the marketplace. Both the technology required to produce (i.e., personal computer and modelling/rendering software) and view (i.e., modified stereoscope) the images is unimposing. Both devices can easily fit in a studio or a boardroom and together can be utilized effectively to permit designers, clients and end-users to experience proposed spaces and projects. Furthermore, these technologies are familiar (clients and end-users have already experienced them in other applications and settings) and assume a fraction of the cost of more dynamic, immersive virtual reality systems. Working from this base, limitations of the process as well as future applications of computer-generated stereoscopic images are identified.
keywords	Stereovision, Representation, Computers, Architects, Design
series	CAAD Futures
last changed	2003/11/21 15:15

_id	4bf6
authors	Akin, O. and Lin, C.
year	1995
title	Design Protocol data and novel design decisions
source	Design Studies, 16 (#2, April), 211-236
summary	This work is a part of The Delft Protocols Workshop which is an international gathering of experts on design research. The objective is to study the behaviours of designers using techniques of cognitive psychology in general and protocol analysis in particular. The purpose of this paper is to explore the relationship between visual-graphic data processing and novel design ideas. Several analyses dealing with verbal-conceptual and visual-graphic data have been conducted; and the relationships between design activities and design decisions have been explored. The findings indicate that phases of the design process and the activities correlate with key design decisions.
series	journal paper
email
last changed	2003/04/23 15:14

_id	8a8a
authors	Akin, Ö., Sen, R., Donia,M. and Zhang, Y.
year	1995
title	SEED-Pro: Computer-Assisted Architectural Programming in SEED
source	Journal of Architectural Engineering -- December 1995 -- Volume 1, Issue 4, pp. 153-161
summary	Computer-assisted architectural programming is in its infancy. What there is in terms of architectural programming theory often differs from practice. In the first half of this paper we define relevant terms, provide abrief review of the state of the art, and draw attention to the primacy of architectural programming in design. SEED-Pro is introduced as an intelligent assistant providing structure to the normally open-endedactivities of design. This includes the creation of an architectural program from scratch. In the second, more technical, part of the paper we emphasize three specific topics. The design problem specificationfunctionality is described. The generation and evaluation of the emerging architectural program is discussed. An approach to the decomposition of the architectural program into alternative hierarchies is provided.The paper concludes with a discussion of what is and remains to be accomplished.
series	journal paper
email
last changed	2003/05/15 21:27

_id	c078
authors	Allegra, M, Fulantelli, G. and Mangiarotti, G.
year	1995
title	A New Methodology to Develop Hypermedia Systems for Architecture History
doi	https://doi.org/10.52842/conf.ecaade.1995.043
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 43-52
summary	This paper illustrates a research project concerning the analysis of architectural works through a comparative study based on hypermedia tools; by exploring the hypermedia, users can find the main subjects relative to the "method " of architectural planning. The use of multimedia in architecture allows the integration in a single system of different types of information which are necessary for the description of a work. texts, designs, photos and sounds. In addition, the hypertext information structure allows the direct intervention on analyzed projects, by pointing out the more important themes and their relationships. Users have the opportunity to immerse themselves in hypermedia and choose the subject to navigate through on each occasion. Our research project aims at developing a prototype concerning two architects. I.L.Kahn and F.L. Wright. The development methodology is based on the key role played by the components of architectonic works, thus allowing users to compare them in a simple and correct way. The methodology used in this work can be extended to other architects or periods, by simply changing the possibility of navigation, i.e. by changing the reading keys.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_6.htm
last changed	2022/06/07 07:54

_id	0bbb
authors	Alshawi, Mustafa
year	1995
title	Dynamic Generation of Design Plans at the Brief Stage
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 219-228
summary	The traditional approach to design and construction suffers from many limitations. As the technology becomes more available to the average users, the need for an effective and efficient solution has never been greater. This paper introduces an alternative approach to the life cycle of construction projects "application controlled process". Based on this approach, a framework for an Integrated Construction Environment (ICE) has been developed and implemented in a prototype demonstrator "SPACE" (Simultaneous Prototyping for An integrated Construction Environment). This paper is only concerns with those parts of the ICE which are relevant to the dynamic generation of design drawings. The NIRMANI system aims at generating a schematic design by retrieving previous design solutions that match the problem specification from a multimedia case library. While the Bay Design Systems aims at re-adjusting the produced design solution to minimise construction problems.
keywords	Integrated Environments, Case-Based Design, Project Life Cycle, Integrated Construction Environment
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
doi	https://doi.org/10.52842/conf.ecaade.1995.003
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

_id	1a52
authors	Amor, R., Augenbroe, G., Hosking, J., Rombouts and W., Grundy, J.
year	1995
title	Directions in modelling environments
source	Automation in Construction 4 (3) (1995) pp. 173-187
summary	Schema definition is a vital component in the computerised A/E/C projects. existing tools to manage this task are limited both in terms of the scope Of problems they can tackle and their integration with each other. This paper describes a global modellling and development environment for large modelling projects. This environment provides a total solution from initial design of schemas to validation, manipulation arid navigation through final models. A major benefit of the described system is the ability to provide multiple views of evolving schemas (or models) in both graphical and textual forms This allows modellers to visualise their schemas and instance models either textually or graphically as desired. The system automatically maintains the Conisistency of the informalion in these views even when modifications are made in other views. Simple and intuitive view navigation methods allow required information to he rapidly accessed. The environment supports strict checking of model instances and schemas in one of the major ISO-standardised modelling languages no used in product data technology. Ill this paper we show how such a modelling environment has been constructed for evaluation in the JOULE founded COMBINE project.
keywords	Modelling Environment; Consistency; Multiple Views: Views; Building Models; Information Management; Integrated System; Product Modelling
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 14:33

_id	a1be
id	a1be
authors	Andel, J. van
year	1995
title	ENVIRONMENT-BEHAVIOR STUDIES AND DESIGN RESEARCH
source	Oxman, R.M., Bax, M.F.Th., Achten, H.H. (eds.) Design research in the Netherlands, 43-47
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN1995_Andel.pdf
last changed	2005/10/12 15:12

_id	c642
authors	Andersen, T. and Carlsen, N.V.
year	1995
title	Software design of maintainable knowledge-based systems for building design
source	Automation in Construction 4 (2) (1995) pp. 101-110
summary	Identifying and establishing a basic structure for knowledge representation is one of the keys to successful design of knowledge-based computer systems. In Building Design and Construction, this initial knowledge structure can be achieved by utilizing a query driven approach to software engineering. As (user) queries reflect the user's demand for in/output, it is natural to link the overall user dialogue with key elements in the knowledge base direct connections between user screen and objects in the knowledge base support prototyping and testing the application during development. However, the price for pursuing this approach in its pure form can be high, as needs for later maintenance and augmentation of the system can be very hard to fulfill. To overcome these problems, a strict user interlace, software separation strategy must be. introduced at early stages of software design. and implemented as a global control module as independent of the knowledge processing as possible.
keywords	Knowledge-based; Query driven: Software design; User interlace: Separation; Maintainable systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:35

_id	df4b
authors	Angulo Mendivil, Antonieta Humbelina
year	1995
title	On the Conceptual Feasibility of a CAAD-CAAI Integrated Decision Support System: A Computer Aided Environment for Technical Decision Making in Architecture
source	Delft University of Technology
summary	This document addresses two questions: What are the ultimate means of design support we can offer to the architect, and how can we devise them? We are not the first ones to address these questions, neither the first ones to point our finger in the direction of Decision Support Systems for such purposes. Nevertheless, we may be among those scholars that understanding 'Decision Support" in terms of "Learning Support", are willing to explore the implications that such an understanding assumes for the concept of Decision Support Systems. Our exploration in such regards has shown us that knowledge application and knowledge acquisition cycles describe a continuum, and that such cycles, encapsulated in our "Practice Based Learning" and "Continuing Professional Development" dynamics are present in both our instructional and professional environments. From such a perspective, our scope regarding feasible Decision Support Systems is not restricted to the use of CAAD instrumental resources, but expanded into a context of CAAD-CAAI integration. Throughout this document we conceive a system that blends CAAD and CAAI resources looking forward to the creation of a Support Environment that seeks to motivate a reflective attitude during design, in such a way, upgrade our capability for acquiring as well as applying knowledge in design. In instrumental terms, this document explains how mainstream CAAD developments in the field of "Intelligent Front End Technology" and CAAI developments in the field of "Knowledge-based Curricular Networks" can complement each other in the establishment of a Decision Support System of trans-environmental relevancy. As an application framework for the concept and instrumental base described above, this document presents an image of the kind of decision-making model that it will intend to support, the kind of task support model it will look forward to implement, and the kind of general instrumental layout it will require. On the basis of such an instrumental layout, the system that is hereby outlined can be regarded as a "CAAD-CAAI Integrated", "Intelligent", and "User-Oriented" Interface System.
series	thesis:PhD
email
last changed	2003/02/12 22:37

For more results click below: