Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3269

Reformat results as: short short into frame detailed detailed into frame

_id	e72e
authors	Asaro, N., Corrao, R., Faconti, D., Fiandaca, O., Grifoni, P. and Silvani, A.
year	1995
title	Riesce: An Hypertextual Tool for Browsing Information Produced in the Building Sector by PFEd
doi	https://doi.org/10.52842/conf.ecaade.1995.401
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 401-408
summary	The structure of a set of documents allow for navigation inside single texts. Yet it is often also an obstacle to comparability between different parts and concepts. Even document formatting is only a partial answer to the problem, since it fails to develop the matter of relationships between enunciation and results. It was need to retrieve information about the scientific findings made by Research Units (Operating Units) during the first three year period of the "Progetto Finalizzato Edilizia" (PFEd) for assessment and transfer purposes which led us to design and develop a system to facilitate the retrieval of the relevant information. We chose the building sector for this application because of its relative lack of previous experience of this type, the variety and complexity of documentation available and, last but not least, the general underestimation of research topics and results vis-à-vis the development of the sector. By making the suggestion and information inherent in its findings more available, in terms of method and ambit, as well as more explicit, the research has already achieved a significant result. In view of the prototype character of the experiment, the information will probably be adopted to produce an hypertext on the final results.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_48.htm
last changed	2022/06/07 07:54

_id	4202
authors	Brown, Michael E. and Gallimore, Jennie J.
year	1995
title	Visualization of Three-Dimensional Structure During Computer-Aided Design
source	International Journal of Human-Computer Interaction 1995 v.7 n.1 pp. 37-56
summary	The visual image presented to an engineer using a computer-aided design (CAD) system influences design activities such as decision making, problem solving, cognizance of complex relationships, and error correction. Because of the three-dimensional (3-D) nature of the object being created, an important attribute of the CAD visual interface concerns the various methods of presenting depth on the display's two-dimensional (2-D) surface. The objective of this research is to examine the effects of stereopsis on subjects' ability to (a) accurately transfer to, and retrieve from, long-term memory spatial information about 3-D objects; and (b) visualize spatial characteristics in a quick and direct manner. Subjects were instructed to memorize the shape of a 3-D object presented on a stereoscopic CRT during a study period. Following the study period, a series of static trial stimuli were shown. Each trial stimulus was rotated (relative to the original) about the vertical axis in one of six 36° increments between 0° and 180°. In each trial, the subject's task was to determine, as quickly and as accurately as possible, whether the trial object was the same shape as the memorized object or its mirrored image. One of the two cases was always true. To assess the relative merits associated with disparity and interposition, the two depth cues were manipulated in a within-subject manner during the study period and during the trials that followed. Subject response time and error rate were evaluated. Improved performance due to hidden surface is the most convincing experimental finding. Interposition is a powerful cue to object structure and should not be limited to late stages of design. The study also found a significant, albeit limited, effect of stereopsis. Under specific study object conditions, adding disparity to monocular trial objects significantly decreased response time. Response latency was also decreased by adding disparity information to stimuli in the study session.
series	journal paper
last changed	2003/05/15 21:45

_id	27
authors	De Gregorio, R., Carmena, S., Morelli, R.D., AvendaÒo, C. and Lioi, C.
year	1998
title	La Construccion del Espacio del Poder. Museo de la Casa Rosada (The Construction of the Space of Power. Museum of the "Casa Rosada" (Argentinean Presidential House))
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 212-217
summary	The present work is part of the exposition "Francesco Tamburini, La ConstrucciÛn del Espacio del Poder I", exhibited in Rivadavia Cultural Center ( Rosario city), and in Casa Rosada Museum during 1997. The Exposition is based on an investigation program of the space that involves Casa Rosada, determining this space as the first piece of its collection. In 1995, when a group of argentines where visiting the picture gallery Pianetti (Jesi, Italy) there have been found some watercolours of Francesco Tamburini (1846-1890), planner of the main faÁades of the Government and author of many works. These watercolours have great value for architecture, and unknown by public, they have been the starting point of the Exposition. Among these argentines was Roberto De Gregorio architect, historian teacher of this school of architecture, and in charge of the historical investigation. C.I.A.D.'s specific work consists in converting in digital data Casa Rosada's faÁades. The two first stages, already completed, finished on the digital data conversion of facades, in front of Plaza de Mayo and Rivadavia street, with presidential access esplanade. Actually the work is centred on the two facades left and on the elaboration of an electronic model for the edition of a CD-ROM containing the information of the exposition.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	d935
authors	Pasko, A.A., Adzhiev, V.D., Sourin, A.I. and Savchenko, V.V.
year	1995
title	Function representation in geometric modeling: concepts, implementation and applications
source	The Visual Computer, 11 (8) 429-446
summary	Geometric modeling using continuous real functions of several variables is discussed. Modeling concepts include sets of objects, operations and relations. An object is a closed point set of n-dimensional Euclidean space with a defining inequality f x x xn ( , ,..., ) 1 2 0 °Ÿ . Transformations of a defining function are described for the set-theoretic operations, blending, offsetting, bijective mapping, projection, Cartesian product and metamorphosis. Inclusion, point membership and intersection relations are described. In the implemented interactive modeling system, we use highlevel geometric language that provides extendibility of the modeling system by input symbolic descriptions of primitives, operations and predicates. This approach supports combinations of representational styles, including constructive geometry, sweeping, soft objects, voxel-based objects, deformable and other animated objects. Application examples of aesthetic design, collisions simulation, NC machining, range data processing, and 3D texture generation are given.
series	journal paper
last changed	2003/04/23 15:50

_id	54f5
authors	Wakisaka, T. Furuya, N. Inoue, Y. and Shiokawa, T.
year	2000
title	Automated construction system for high-rise reinforced concrete buildings
source	Automation in Construction 9 (3) (2000) pp. 229-250
summary	An all-weather automated construction system has been developed to reduce the total cost of high-rise reinforced concrete building construction. It was applied for the first time ever to the construction of a 26-story reinforced concrete condominium project located in the Tokyo Metropolitan area in 1995. This system incorporates four major elements: (a) a synchronously climbing all-weather temporary roof; (b) a parallel material delivery system; (c) prefabrication and unification of construction materials; and (d) a material management system. It ensures good quality; improves working and environmental conditions; reduces the construction period, manpower, and waste; and improves overall productivity.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	41e5
authors	Abendroth, M., Decock, J. and Mestaoui, N.
year	2000
title	O_1:// the hypertextu(r)al matrix
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 75-76
summary	Founded in 1995 LAB[au], laboratory for architecture and urbanism, links theoretic research LAB[a+u] to concrete works of conception and realisations LA.BAU. LAB[au] elaborates a “hyperdesign” investigating the implications of new technologies of communication and computation in spatiotemporal and social processes and their forms of representation as architecture and urbanism. The transposition of the hypertext model to architectural and urban concepts question the mutation of the spatial and semantic construct of space. The definition of architecture as a code is based on “glocal” systems according to the processes of computation and communication.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
doi	https://doi.org/10.52842/conf.ecaade.1995.003
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

_id	c642
authors	Andersen, T. and Carlsen, N.V.
year	1995
title	Software design of maintainable knowledge-based systems for building design
source	Automation in Construction 4 (2) (1995) pp. 101-110
summary	Identifying and establishing a basic structure for knowledge representation is one of the keys to successful design of knowledge-based computer systems. In Building Design and Construction, this initial knowledge structure can be achieved by utilizing a query driven approach to software engineering. As (user) queries reflect the user's demand for in/output, it is natural to link the overall user dialogue with key elements in the knowledge base direct connections between user screen and objects in the knowledge base support prototyping and testing the application during development. However, the price for pursuing this approach in its pure form can be high, as needs for later maintenance and augmentation of the system can be very hard to fulfill. To overcome these problems, a strict user interlace, software separation strategy must be. introduced at early stages of software design. and implemented as a global control module as independent of the knowledge processing as possible.
keywords	Knowledge-based; Query driven: Software design; User interlace: Separation; Maintainable systems
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:35

_id	b914
authors	Asanowicz, Aleksander and Asanowicz, Katarzyna
year	1995
title	Designing, CAD and CAD
source	CAD Space [Proceedings of the III International Conference Computer in Architectural Design] Bialystock 27-29 April 1995, pp. 181-192
summary	The general aim of our discussion is to analyze what has been changed in design process according to introducing the computers technology. For the better understanding of the design process evolution, we should precisely define start point - the traditional design process.Let's treat it as an iteration game between a designer and user. If we assume that the designing base is a reductive strategy, we can define six stages of it: 1.) To define a need; 2.) To formulate a task; 3.) To synthesize a design proposals; 4.) To analyze and optimize; 5.) To make a presentation. // The last stage - the presentation of designing proposals is the main factor of using computers in design process and creating definition of CAD as Computer Aided Drafting. According to this interpretation CAD has included four groups of activities: A.) Geometrical modelling; B.) Analysis; C.) Revision and estimation of design proposals; D.) Technical drawing preparing. // Unfortunately it has no connections with another meaning of CAD - Computer Aided Design because concerns every stage of design process except of creation of architectural form. On the other hand, computer enables us to improve the design process by permanent perception of designing forms and dynamic control over the transforming structure. Nowadays thanks to full-function sketching workstation and software like Fractal Design Painter a computer can be useful from the moment when the first line is drawing. It is possible, that the new generation of CAD software - CAD with Personality which connects computer models with picture transformation will enable CAD to be Computer Aided Design.
series	plCAD
email
last changed	2000/01/24 10:08

_id	dfaf
authors	Ataman, Osman
year	2000
title	Some Experimental Results in the Assessment of Architectural Media
doi	https://doi.org/10.52842/conf.acadia.2000.163
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 163-171
summary	The relationship between the media and architectural design can be an important factor and can influence the design outcome. However, the nature, direction and magnitude of this relationship are unknown. Consequently, there have been many speculative claims about this relationship and almost none of them are supported with empirical research studies. In order to investigate these claims and to provide a testable framework for their potential contributions to architectural education, this study aims to explore the effects of media on architectural design. During 1995-1997, a total of 90 students enrolling in First Year Design Studio and Introduction to Computing classes at Georgia Tech participated in the study. A set of quantitative measures was developed to assess the differences between the two media and the effects on the architectural design. The results suggested that media influenced certain aspects of students’ designs. It is concluded that there is a strong relationship between the media and architectural design. The type of media not only changes some quantifiable design parameters but also affects the quality of design.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	c3fa
authors	Barnanente, A., Cuscito, A.P. and Maiellaro, N.
year	1995
title	Expert System and Hypertext for Development Control
doi	https://doi.org/10.52842/conf.ecaade.1995.347
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 347-354
summary	The paper deals with an interactive system based on expert system and hypertext interaction in order to meet the demands of support for local government officials' activity in building-application inspection. Also described are the planning departments context and the problem related to eliciting knowledge in building-inspection process.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_42.htm
last changed	2022/06/07 07:54

_id	c19c
authors	Beliveau, Y.J.
year	1996
title	What can real-time positioning do for construction?
source	Automation in Construction 5 (2) (1996) pp. 79-89
summary	New technologies are now available that can rapidly measure three-dimensional coordinates of objects. The integration of these fast 3-D Real-time Position Measurement (D-RtPM) devices and CAD (3D-RtPM/CAD) technologies can be viewed as a better tool for surveyors or as a means to change the most fundamental concepts of the construction industry. 3D-RtPM/CAD is a better surveying tool; however, 3D-RtPM/CAD as the basis for fundamental change within the construction industry is the issue.There are several potential technologies that can provide real-time position measurement. This paper will limit presentation to two of these. The first is based on recent developments in Global Positioning Systems. The second is a new laser-based product, OdysseyTM (Odyssey is a trademark of Spatial Positioning Systems, Inc.). Odyssey received the NOVA award in March, 1995 because of its recognized performance enhancement to the construction industry. These positioning systems provide the capability for equipment and crafts people to view the project from a graphical representation in which they see their position interactively updated. Potential benefits to the construction industry are presented. The research needed achieving maximum benefits of these systems is also presented.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	8f0b
authors	Bhavnani, S., Flemming, U., Forsythe, D.E., Garrett, J.H., and Shaw, D.S.
year	1995
title	Understanding and Assisting CAD Users in the Real World
doi	https://doi.org/10.52842/conf.acadia.1995.209
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 209-227
summary	In spite of the rapid increase in functionality and resources provided by CAD systems, productivity growth expected from their use has been difficult to achieve. Although many surveys describe this "productivity puzzle", few studies have been conducted on actual CAD users to understand its causes. In an effort to understand this issue, the first author visited a federal architectural office and observed CAD users in their natural setting using ethnographic techniques developed by cultural anthropologists. This paper describes preliminary results obtained from the study. The study revealed that users had leveled-off in their learning and experimentation and were using the CAD system in sub-optimal ways. The authors argue that this sub-optimal usage occurs because users have limited ways to learn better or different ways of executing tasks. The authors propose that CAD systems should provide active assistance, that is, intervene spontaneously with advice, assistance, and relevant information while the user interacts with the system. They conclude with some issues revealed by the study that should be considered when developing such active assistance.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	c6bb
authors	Bottelli, Valeria and Fogh, Christian
year	1995
title	Galathea: A Case-Based Planning Tool for Knowledge Navigation in the Architectural Design Process
doi	https://doi.org/10.52842/conf.ecaade.1995.427
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 427-436
summary	We report on an on-going Ph.D. research aimed at the analysis of the nature of process knowledge in architectural design and the development of a conceptual model for a case-based navigation tool for its support. We describe architectural design from a process viewpoint and assume it as a form of intentional planning, leading from an initial state configuration toward a desired situation, by means of an incremental specification of goals, constraints and involved variables. We consider the very essence of design and of the specific professional skill characterising designers as the continual recursive transformation of the initial solution model, in order to map the desired state onto the enacted one and the capability to govern a number of continually changing variables in this direction. On the basis of this general concept of the design process, we describe the model of Galathea, a case-based planning tool, aimed at progressively representing the enlarging space of acquired knowledge, and at supporting the designer´s central role in the management of the design process.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_50.htm
last changed	2022/06/07 07:54

_id	913a
authors	Brutzman, D.P., Macedonia, M.R. and Zyda, M.J.
year	1995
title	Internetwork Infrastructure Requirements for Virtual Environments
source	NIl 2000 Forum of the Computer Science and Telecommunications Board, National Research Council, Washington, D.C., May 1995
summary	Virtual environments (VEs) are a broad multidisciplinary research area that includes all aspects of computer science, virtual reality, virtual worlds, teleoperation and telepresence. A variety of network elements are required to scale up virtual environments to arbitrarily large sizes, simultaneously connecting thousands of interacting players and all kinds of information objects. Four key communications components for virtual environments are found within the Internet Protocol (IP) suite: light-weight messages, network pointers, heavy-weight objects and real-time streams. Software and hardware shortfalls and successes for internetworked virtual environments provide specific research conclusions and recommendations. Since large-scale networked are intended to include all possible types of content and interaction, they are expected to enable new classes of interdisciplinary research and sophisticated applications that are particularly suitable for implementation using the Virtual Reality Modeling Language (VRML).
series	other
last changed	2003/04/23 15:50

_id	80df
authors	Cook, Alan R.
year	1995
title	Stereopsis in the Design and Presentation of Architectural Works
doi	https://doi.org/10.52842/conf.acadia.1995.113
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 113-137
summary	This article presumes the primacy of spatial cognition in evaluating architectural designs and begins by describing key concepts involved in the perception of spatial form, focussing on parallax and stereoscopy. The ultimate emphasis is directed at presenting techniques which employ computers with modest hardware specifications and a basic three-dimensional modeling software application to produce sophisticated imaging tools. It is argued that these techniques are comparable to high end computer graphic products in their potentials for carrying information and in some ways are superior in their speed of generation and economies of dissemination. A camera analogy is considered in relation to controlling image variables. The ability to imply a temporal dimension is explored. An abbreviated summary of pertinent binocular techniques for viewing stereograms precedes a rationalization and initiation for using the cross-convergence technique. Ways to generate and view stereograms and other multiscopic views using 3-D computer models are described. Illustrations from sample projects show various levels of stereogram rendering including the theoretically 4-D wireframe stereogram. The translated perspective array autostereogram is presented as an economical and easily reproducible alternative to holography as well as being a substitute for stop action animation.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	4aae
authors	Day, Alan K. and Radford, Antony D.
year	1995
title	Imaging Change: The Computer City Model as a Laboratory for Urban Design Research
source	Sixth International Conference on Computer-Aided Architectural Design Futures [ISBN 9971-62-423-0] Singapore, 24-26 September 1995, pp. 495-506
summary	The use of an extensive and detailed computer model of the city of Bath, UK, as a laboratory for urban design research is discussed. Bath is a small predominantly Georgian historic city that has been designated a World Heritage Site. Examples are drawn from four kinds of work: the representation of Bathís historic growth (including unbuilt plans), the prediction of the urban design impact of individual development proposals, the study and development of explicit and implicit urban design Çrulesë for the form of existing and new development, and the impact on city form and appearance of policy proposals for urban sustainability.
keywords	3D City Modeling, Urban Modelling, Planning, Public Consultation
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	c68b
authors	De Cola, S., La Franca, R., Latona, D. and Parlato, W.
year	1995
title	Hypa - An Hypertext System about the Urban Growth of the City of Palermo
doi	https://doi.org/10.52842/conf.ecaade.1995.021
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 21-28
summary	At the Department of Representation at the University of Palermo an hypertext about the evolution of the city of Palermo has been developed. The system told the events that marked the evolution of the city by images and text. The hypertetx structure allow the reader to paginate the story following different need and/or curiosity. The system is open so it is possible to maintain the data base and to update it with specific contribution (degree thesis or reseurch) or whit the addition of new data related to already developed themes.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_3.htm
last changed	2022/06/07 07:55

_id	5e49
authors	Deering, Michael F.
year	1996
title	HoloSketch: A Virtual Reality Sketching/Animation Tool Special Issue on Virtual Reality Software and Technology
source	Transactions on Computer-Human Interaction 1995 v.2 n.3 pp. 220-238
summary	This article describes HoloSketch, a virtual reality-based 3D geometry creation and manipulation tool. HoloSketch is aimed at providing nonprogrammers with an easy-to-use 3D "What-You-See-Is-What-You-Get" environment. Using head-tracked stereo shutter glasses and a desktop CRT display configuration, virtual objects can be created with a 3D wand manipulator directly in front of the user, at very high accuracy and much more rapidly than with traditional 3D drawing systems. HoloSketch also supports simple animation and audio control for virtual objects. This article describes the functions of the HoloSketch system, as well as our experience so far with more-general issues of head-tracked stereo 3D user interface design.
keywords	Computer Graphics; Picture/Image Generation; Display Algorithms; Computer Graphics; Three-Dimensional Graphics and Realism; Human Factors; 3D Animation; 3D Graphics; Graphics Drawing Systems; Graphics Painting Systems; Man-Machine Interface; Virtual Reality
series	other
last changed	2002/07/07 16:01

_id	95b9
authors	Devernay, F. and Faugeras, O.
year	1995
title	Automatic Calibration and Removal of Distortion from scenes of structured environments
source	Proceedings of the SPIE Conference on Investigate and Trial Image Processing, 2567, SPIE, San Diego, CA, July 1995
summary	Most algorithms in 3-D Computer Vision rely on the pinhole camera model because of its simplicity, whereas video optics, especially low-cost wide-angle lens, generate a lot of non-linear distortion which can be critical. To ønd the distortion parameters of a camera, we use the following fundamental property: a camera follows the pinhole model if and only if the projection of every line in space onto the camera is a line. Consequently, if we ønd the transformation on the video image so that every line in space is viewed in the transformed image as a line, then we know how to remove the distortion from the image. The algorithm consists of ørst doing edge extraction on a possibly distorted video sequence, then doing polygonal approximation with a large tolerance on these edges to extract possible lines from the sequence, and then ønding the parameters of our distortion model that best transform these edges to segments. Results are presented on real video images, compared with distortion c...
series	other
last changed	2003/04/23 15:14

For more results click below: