Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3326

Reformat results as: short short into frame detailed detailed into frame

_id	2ca1
authors	Montagu, A. and Bermudez, J.
year	1998
title	Datarq: The Development of a Website of Modern Contemporary Architecture
doi	https://doi.org/10.52842/conf.ecaade.1998.x.p7a
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998
summary	The pedagogic approach in the architectural field is suffering a deep change taking in consideration the impact that has been produced mainly by the CAD and multimedia procedures. An additional view to be taken in consideration is the challenge produced by the influence of advanced IT which since 1990-92, has affected positively the exchange of information among people of the academic environment. Several studies confirm this hypothesis, from the wide cultural spectrum when the digitalization process was emerging as an alternative way to data processing (Bateson 1976) to the pedagogical-computational side analyzed by (Papert 1996). One of the main characteristics indicated by S. Papert (op.cit) is the idea of "self teaching" which students are used everywhere due to the constant augment of "friendly" software and the decreasing costs of hardware. Another consequences to point out by S. Paper (op.cit) is that will be more probably that students at home will have more actualized equipment that most of the computer lab. of schools in general. Therefore, the main hypothesis of this paper is, "if we are able to combine usual tutorials design methods with the concept of "self-teaching" regarding the paradigmatic architectural models that are used in practically all the schools of architecture (Le Corbusier, F.L.Wright, M.v. der Rohe, M.Botta, T.Ando, etc.) using a Web site available to everybody, what we are doing is expanding the existing knowledge in the libraries and fulfill the future requirements of the newly generations of students".
series	eCAADe
email
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/35montagu/index.htm
last changed	2022/06/07 07:50

_id	0ef8
authors	Völker, H., Sariyildiz, S., Schwenck, M. and Durmisevic, S.
year	1996
title	THE NEXT GENERATION OF ARCHITECTURE WITHIN COMPUTER SCIENCES
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Considering architecture as a mixture of exact sciences and the art, we can state that as in all other sciences, every technical invention and development has resulted in advantages and disadvantages for the well-being and prosperity of mankind. Think about the developments in the fields of nuclear energy or space travel. Besides bringing a lot of improvements in many fields, it also has danger for the well-being of a mankind. The development of the advanced computer techniques has also influence on architecture, which is inevitable. How did the computer science influence architecture till now, and what is going to be the future of the architecture with this ongoing of computer science developments? The future developments will be both in the field of conceptual design (form aspect) and also in the area of materialization of the design process. These all are dealing with the material world, for which the tools of computer science are highly appropriate. But what will happen to the immaterial world? How can we put these immaterial values into a computers model? Or can the computer be creative as a human being? Early developments of computer science in the field of architecture involved two-dimensional applications, and subsequently the significance of the third dimension became manifest. Nowadays, however, people are already speaking of a fourth dimension, interpreting it as time or as dynamics. And what, for instance, would a fifth, sixth or X-dimension represent? In the future we will perhaps speak of the fifth dimension, comprising the tangible qualities of the building materials around us. And one day a sixth dimension might be created, when it will be possible to establish direct communication with computers, because direct exchange between the computer and the human brain has been realised. The ideas of designers can then be processed by the computer directly, and we will no longer be hampered by obstacles such as screen and keyboard. There are scientist who are working to realize bio-chips. If it will work, perhaps we can realise all these speculations. It is nearly sure that the emergence of new technologies will also affect our subject area, architecture and this will create fresh challenges, fresh concepts, and new buildings in the 21st century. The responsibility of the architects must be, to bear in mind that we are dealing with the well-being and the prosperity of mankind.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:43

_id	a28d
authors	Koutamanis, A., Van Leusen, M. and Mitossi, V.
year	2001
title	Route analysis in complex buildings
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 711-724
summary	Analysis of pedestrian circulation in buildings is usually performed in the early stages of the design process or later on with respect to a specific design problem such as fire safety. In both cases, the analysis relates more to wayfinding, i.e. search for a route on the basis of fundamental normative criteria. Wayfinding analysis in existing buildings is useful for the comparison between “rational” behaviour and actual usage but this comparison does little to explicate the observed structure of pedestrian circulation. In contrast to wayfinding, route analysis deals with the registration and assessment of actual patterns of pedestrian circulation in existing buildings. These patterns are represented topologically and geometrically. The geometric representation makes use of norms underlying building codes in order to reach an appropriate level of abstraction. Route representations are implemented on top of a building representation of relevant spatial and building elements. The building representation serves both as input and output for the route analysis. Input and output are largely automated, including production of the geometric route locally (i.e. within each space) and measurement of route distance and complexity. Use data are collected in an alphanumeric database and linked dynamically to the geometric and topological representation. Route analysis supports and refines other forms of post-occupancy evaluation by adding important dynamic aspects to activity allocation and compartmentalization.
keywords	Pedestrian Circulation, Analysis, Representation, Interaction
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ddss9861
id	ddss9861
authors	Leusen, M. van and Mitossi, V.
year	1998
title	A practical experiment in representation and analysis of buildings
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The TYPOLOGY project was set up by the Dutch Government Building Agency (GBA) to explore computerised representations of buildings that allow analysis of various aspects of their performance. So far this project produced the RF-model, an abstract computerised representation.Physical elements of the building are not represented as such, only individual spaces and boundary segments along which they are adjacent are represented explicitly. Spaces can have any number of functional properties such as the general category of floor area they are included in, the activities they accommodate, or the particular safety compartment or circulation system they belong to. Similarly, boundary segments may, for example, provide access or view, may be included in a particularcategory, such as interior walls, or in a safety or security barrier.The RF-model enabled the presentation and quantitative analysis of design proposals for large and complex buildings such as courts of justice and prison buildings. The model is also used in a multiaspect analysis of a series of recently erected Dutch prison buildings. We expect that these first results will develop into a rich and professional precedent-based system, to be used in the early stages of design. The strategic goal of the project is to derive from the accumulated models and their analysis a more general understanding of the relations between a building’s actual characteristics and various aspects of its performance.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	1fb3
authors	Akin, O., Cumming, M., Shealey, M. and Tuncer, B.
year	1997
title	An electronic design assistance tool for case-based representation of designs
source	Automation in Construction 6 (4) (1997) pp. 265-274
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case-based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case-base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4cda
authors	Akin, O., Cumming, M. , Shealey, M. and Tuncer, B.
year	1996
title	An Electronic Design Assistance Tool for Case Based Representation of Designs
doi	https://doi.org/10.52842/conf.acadia.1996.123
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 123-132
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996, and will be used in future studios, as well.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	31f5
authors	Alfares, M. and Seireg, A.
year	1996
title	An integrated system for computer-aided design and construction of reinforced concrete buildings using modular forms
source	Automation in Construction 5 (4) (1996) pp. 323-341
summary	The study reported in this paper investigates the feasibility of automating the on-site construction of reinforced concrete residential buildings. The basic construction tasks are identified, analyzed and modified with a view towards potential for automation. Emphasis is placed on developing modular forms that facilitate automation. The majority of work in the field of construction robotics has focused on the adaptation of existing industrial robots to automate traditional construction processes. This paper outlines a computer-aided construction system approach specially suited for integrating design and implementation by on-site robots. A Computer-Integrated Construction (CIC) system, similar to CIM, is developed that includes a CIC data-base, a construction design system, a construction production/process planning system, and a robotics execution system. This approach is intended to minimize the redesign effort as well as the need for on-site manual work.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	8a25
authors	Alshawi, M. and Underwood, J.
year	1996
title	Applying object-oriented analysis to the integration of design and construction
source	Automation in Construction 5 (2) (1996) pp. 105-121
summary	This paper implements an Object Oriented Analysis technique to model information related to design and construction. In a previous study, an approach to integrate design and construction processes based upon information analysis and modelling has been proposed. By breaking down the project's vast information into groups of related information, construction related problems have been identified and then traced back too their relevant design processes. This paper models this process using a relatively young and new method of analysis rather than a traditional structured approach. An Object-Oriented Analysis (OOA) method has been applied to model the information in terms of the fundamental ideas that underlie object-oriented technology i.e. object types and classes, methods, requests, encapsulation and inheritance. Proceeding through the five major activities of Coad and Yourdon's OOA method, a complete OOA model has been developed with potential to improve the construction related problems.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	aa7c
authors	Amirante, M. Isabella and Burattini, Ernesto
year	1996
title	Automatic Procedures for Bio-Climatic Control
doi	https://doi.org/10.52842/conf.ecaade.1996.029
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 29-40
summary	The experiences illustrated here are related to the new regulation of teaching architecture in Italy and these ones in particular have been concentrated on the technological aspects of teaching architecture. We can consider the evolution of the architect from the individual operator to the manager multi- disciplinary aspects of the building process ( building process manager) as a reality today. Information technology, specifically applied to bio-climatic architecture and environmental control, can be of great importance for this professional role, and for this reason it is very useful to include these topics at the beginning the teaching design process. This paper describes a particular approach to bio-climatic problems of the architectural project. An experimental course has been performed by the second year students of the "Laboratorio di Construzione dell' Architettura", at the School of Architecture of the Second University of Naples, in Aversa. Analysing old and new buildings, they used some flow charts for the evaluation and representation of energetic behaviour of buildings regarding their climatic and geographical environment. In the flow charts the decisions are represented by boxes that allow to determine "rightness index" related to: morphological characters of the site and environment, typology and particular organisation of the inside spaces, shape of building, technological solution of the building "skin". The navigation through the decision boxes is made with simple options like; "winds: protected or exposed site", "shape of building; free, close or cross plane", "presence of trees on the south,; yes or not",; it shows the students the bio-climatic quality of the building and, through numeric value assigned to each option, determines the "weight" of its climatic comfort.
series	eCAADe
last changed	2022/06/07 07:54

_id	0f0e
authors	Andrzejewski, H. and Rostanski, K.
year	1996
title	Landscape Design Tool of Wide Ecological Aspect
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 7-12
summary	The article shows new tool prepared in two Technical Universities in Poland. The packet as a whole, of its current condition, is mainly elaborated by Henryk Andrzejewski at Faculty of Architecture of Wroclaw Technical University. Plant and vegetation units specifier is so far prepared by Krzysztof M. Rostahski and Mirostaw Rogula at Faculty of Architecture of Silesian Technical University. The packet allows to create the new text database of plants and to add the external data to the existing database, to change, to view and to search the data of the existing database of plants in accordance with the selection based on nongraphic search criteria. The packet finally will have 4 modules. One of them is .plant end vegetation units specifier', some details of that are shown here. New aspect is in contents of database which helps to estimate ecological influence of designed group of plants on our body and mind.
series	plCAD
last changed	2003/05/17 10:01

_id	d5c8
authors	Angelo, C.V., Bueno, A.P., Ludvig, C., Reis, A.F. and Trezub, D.
year	1999
title	Image and Shape: Two Distinct Approaches
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 410-415
summary	This paper is the result of two researches done at the district of Campeche, Florianópolis, by the Grupo PET/ARQ/UFSC/CAPES. Different aspects and conceptual approaches were used to study the spatial attributes of this district located in the Southern part of Santa Catarina Island. The readings and analysis of two researches were based on graphic pistures builded with the use of Corel 7.0 e AutoCadR14. The first research – "Urban Development in the Island of Santa Catarina: Public Space Study"- examined the urban structures of Campeche based on the Spatial Syntax Theory developed by Hillier and Hanson (1984) that relates form and social appropriation of public spaces. The second research – "Topoceptive Characterisation of Campeche: The Image of a Locality in Expansion in the Island of Santa Catarina" -, based on the methodology developed by Kohlsdorf (1996) and also on the visual analysis proposed by Lynch (1960), identified characteristics of this locality with the specific goal of selecting attributes that contributed to the ideas of the place its population held. The paper consists of an initial exercise of linking these two methods in order to test the complementarity of their analytical tools. Exemplifying the analytical procedures undertaken in the two approaches, the readings done - global (of the locality as a whole) and partial (from parts of the settlement) - are presented and compared.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.041
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddssar9638
id	ddssar9638
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	1996
title	A Conceptual Model for Concurrent Engineering in Building Design according to Domain Theory
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Concurrent engineering is a design strategy in which various designers participate in a co-ordinated parallel process. In this process series of functions are simultaneously integrated into a common form. Processes of this type ask for the identification, definition and specification of relatively independent design fields. They also ask for specific design knowledge designers should master in order to participate in these processes. The paper presents a conceptual model of co-ordinated parallel design processes in which architectural space is simultaneously defined in the intersection of three systems: a morphological or level-bound system, a functional or domain-bound system and a procedural or phase-bound system. Design strategies for concurrent engineering are concerned with process design, a design task which is comparable to the design of objects. For successfully accomplishing this task, knowledge is needed of the structural properties of objects and systems; more specifically of the morphological, functional and procedural levels which condition the design fields from which these objects emerge, of the series of generic forms which condition their appearance and of the typological knowledge which conditions their coherence in the overall process.
series	DDSS
last changed	2003/11/21 15:16

_id	c872
authors	Beliveau, Y.J., Fithian, J.E. and Deisenroth, M.P.
year	1996
title	Autonomous vehicle navigation with real-time 3D laser based positioning for construction
source	Automation in Construction 5 (4) (1996) pp. 261-272
summary	Autonomous Guided Vehicles (AGVs) are a way of life in manufacturing where navigation can be done in a structured environment. Construction is an unstructured environment and requires a different type of navigation system to deal with three dimensional control and rough terrain. This paper provides a review of navigation systems that utilize dead-reckoning in conjunction with absolute referencing systems such as beacon-based systems, and vision and mapping based system. The use of a real-time laser based technology is demonstrated as a new form of navigation. This, technology does not rely on dead reckoning. The paper outlines the issues and strategies in guiding an autonomous vehicle utilizing only the laser-based positioning system. Algorithms were developed to provide real-time control of the AGV. The laser based positioning system is unique in that it provides three dimensional position data with five updates per second. No other system can provide this level of performance. This allows for control of end effectors and autonomous vehicles in complex and unstructured three dimensional environments. The use of this new type of navigation makes possible the automation of large complex assemblies in rough terrain such as construction.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4daf
authors	Berdinsky, Dimitry V.
year	1996
title	CAAD Creations in Moscow
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 27-30
summary	In the history of architecture we saw changing ideas, styles and methods of designing. From the charcoal in an ancient man's hand, architectural tools transformed into contemporary pens, papers and copying machines. They made the creative architectural work more productive and informative. Today, in the last quarter of our century, evolution of the architectural design is influenced by brandnew intellectual tools and instruments. Invasion of those tools make new problems appear. All the people can be divided into two groups- the first group can be defined as mechanically or mathematically oriented one while the second group can be defined as art oriented one.
series	plCAD
last changed	1999/04/09 15:30

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	b0d8
authors	Bourdakis, V.
year	1996
title	From CAAD to VRML: London Case Study
source	The 3rd UK VRSIG Conference Full Paper Proceedings, De Montfort University
summary	In this paper, the suitability and usability of VRML for urban modelling is discussed based on the experience gained by the creation of urban models of varying sizes, level of detail and use. Areas where the current VRML specification is failing to satisfy the needs of large-scale urban modelling are highlighted. Properties of a successful alternative or VRML3.0 specification are suggested and briefly discussed.
series	other
email
last changed	2003/11/21 15:16

_id	e309
authors	Breen, Jack and Stellingwerff, Martijn
year	1996
title	A Case for Computer-Assisted Creativity through Clarity, Project 12 CAD and Beyond
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 31-35
summary	A paper exploring the opportunities of different Design Media for the benefit of Architectural and Urban Composition. It is argued that during the design process, the designer develops Models for a projected end result, which are visualised in the form of Images using traditional media. The Computer affords the possibility of creating (virtual) Models from which Images can be taken. Current types of Computer Interfaces still form an obstacle for creative computer assisted design, comparable to Sketching. It is argued that the Clarity of the medium will need to be enhanced, if it is to become an Instrument for truly creative design. Using the example of an educational, practical CAD exercise, the case for' Clarity for the benefit of creative Computing is put forward.
series	plCAD
email
last changed	2003/05/17 10:01

_id	acfa
authors	Brown, A., Knight, M. and Nahab, May
year	1996
title	Computer Generated Architectural Images in Practice: what kind and when?
doi	https://doi.org/10.52842/conf.ecaade.1996.079
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 79-86
summary	The production of near-photorealistic images of buildings is becoming increasingly common. The software to produce reasonably sophisticated images being available at affordable prices and the increasing power of generally affordable computers have contributed to this trend. It is also probably the case that the run-of-the-mill architectural practice sees the competition producing this kind of image with a superficially beguiling quality and follow suit. What we ask in this paper is whether we should be more thoughtful about the kind of image used? Should the kind of image chosen to suit the stage of the design that it applies to and the nature of the human agents viewing the image? Of course, in posing the question we imply our answer, that it should. What we do in this paper is to illustrate why we feel it should and what the consequences are for the education of architects who are about to join the world of practice.
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: