Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2630

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar9606
id	ddssar9606
authors	Doughty, D.C. and Zwirner, W.G.
year	1996
title	Spa Hotels and Facilities - a Comparison of Hotels in Budapest, Buxton and Piestany
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	In Britain, health and leisure tourism seems primarily to mean leisure with health being normally merely a secondary consideration ranging from fresh air to diet. In central Europe Spas still draw tourists and patients for leisure and for treatments from their own as well as neighbouring countries. Indeed, whilst Buxton, Bath, Harrogate and Leamington draw day trippers to see their historic buildings, Carlsbad, Budapest, Piestany and many of the other grand old Spas of central Europe are filled with longer-term guests seeking an improvement to their own chronic ailments. The reasons for this decline in British Spas and the continuing relative good health of Spas in central Europe are a complex mix that includes national characteristic, financial constraints and a disbelief by the British medical establishment in the efficacy of the water cure and related Spa treatments. This reluctance to acknowledge complementary health care is certainly not the case in Germany and the old Austro-Hungarian lands and Spa tourism presents a challenge as well as a promise of lucrative international tourism to the emerging "new" states of pre-communist Europe.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9636
id	ddssar9636
authors	Will, B.F., Wong, W.C.H. and Chu, C.H.
year	1996
title	A Case Study of Hypermedia Applications in the Building Industry: Curtain Wall Design, Fabrication and Erection
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	This paper is based on the development of a Hypermedia Information Delivery System called ArchiSpace, by the Department of Architecture, The University of Hong Kong to produce a comprehensive knowledge of a Curtain Wall system. A set of construction drawings of the building were analysed and converted to the 3D hypermedia system format. The focus of this study is the use of the hyper-model environment in information organization and once the 3D hypermedia system is formed the information on the curtain wall system is accessed by the use of hyper-text environments hyper-image environments, and hyper-model environments. The paper analysed that the hyper-model access method seems to be more appropriate than the hyper-text and hyper-image access methods for users who do not have any knowledge pre-requisites. The results obtained by this research are being applied to improve the user friendliness for information access within a hyper-model environment.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9637
id	ddssar9637
authors	Wong, W.C.H. and Will, B.F.
year	1996
title	The Use of An Interactive Animation Viewer in Presenting Architectural Design
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	This paper analyzes the use of a 31) hypermedia system in architectural presentation. It first reviews the current process of using computer animation in architectural presentation and identifies problems in the current process. The research assumes that a new approach using the hyper-model environment and animation together would provide a better environment for presenting architectural animation. An interactive animation viewer is designed and developed using the new approach. A sample architectural animation is presented using a tape-recorded animation player, a normal animation player, the interactive animation viewer, and a real-time animation player. The analysis of the result is made by a comparison in terms of image quality, speed, user interactions, object hyperlinkage, scene complexity, and information transmission on using different systems in presenting the same material. A conclusion is drawn to show the advantages of using the new approach. Limitations on using the new approach are identified too.
series	DDSS
last changed	2003/08/07 16:36

_id	fe54
authors	Regli, W.C. and Cicirello, V.A.
year	2000
title	Managing digital libraries for computer-aided design
source	Computer-Aided Design, Vol. 32 (2) (2000) pp. 119-132
summary	This paper describes our initial efforts to deploy a digital library to support computer-aided collaborative design. At present, this experimental testbed, The EngineeringDesign Knowledge Repository, is an effort to collect and archive public domain engineering data for use by researchers and engineering professionals. We envision thiseffort expanding to facilitate collaboration and process archival for distributed design and manufacturing teams.CAD knowledge-bases are vital to engineers, who search through vast amounts of corporate legacy data and navigate on-line catalogs to retrieve precisely the rightcomponents for assembly into new products. This research attempts to begin addressing the critical need for improved computational methods for reasoning about complexgeometric and engineering information. In particular, we focus on archival and reuse of design and manufacturing data for mechatronic systems. This paper presents adescription of the research problems, an overview of the initial architecture of the testbed and a description of some of our preliminary results on conceptual design anddesign retrieval.
keywords	Computer-Aided Design, Computer-Aided Engineering, Engineering Knowledge-Bases, Product Data Management, World Wide Web, Network-Enabled,CAD,CAE
series	journal paper
email
last changed	2003/05/15 21:33

_id	d5c8
authors	Angelo, C.V., Bueno, A.P., Ludvig, C., Reis, A.F. and Trezub, D.
year	1999
title	Image and Shape: Two Distinct Approaches
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 410-415
summary	This paper is the result of two researches done at the district of Campeche, Florianópolis, by the Grupo PET/ARQ/UFSC/CAPES. Different aspects and conceptual approaches were used to study the spatial attributes of this district located in the Southern part of Santa Catarina Island. The readings and analysis of two researches were based on graphic pistures builded with the use of Corel 7.0 e AutoCadR14. The first research – "Urban Development in the Island of Santa Catarina: Public Space Study"- examined the urban structures of Campeche based on the Spatial Syntax Theory developed by Hillier and Hanson (1984) that relates form and social appropriation of public spaces. The second research – "Topoceptive Characterisation of Campeche: The Image of a Locality in Expansion in the Island of Santa Catarina" -, based on the methodology developed by Kohlsdorf (1996) and also on the visual analysis proposed by Lynch (1960), identified characteristics of this locality with the specific goal of selecting attributes that contributed to the ideas of the place its population held. The paper consists of an initial exercise of linking these two methods in order to test the complementarity of their analytical tools. Exemplifying the analytical procedures undertaken in the two approaches, the readings done - global (of the locality as a whole) and partial (from parts of the settlement) - are presented and compared.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf57
authors	Anumba, C.J.
year	1996
title	Functional Integration in CAD Systems
source	Advances in Engineering Software, 25, 103-109
summary	This paper examines the issue of integration in CAD systems and argues that for integration to be effective, it must address the functional aspects of a CAD system. It discusses the need for integrated systems and, within a structural engineering context, identifies several facets of integration that should be targeted. These include 2-D drafting and 3-D modelling, graphical and non-graphical design information, the CAD data structure and its user interface, as well as integration of the drafting function with other engineering applications. Means of achieving these levels of integration are briefly discussed and a prognosis for the future development of integrated systems explored. Particular attention is paid to the emergence (and potential role) of `product models' which seek to encapsulate the full range of data elements required to define completely an engineering artefact.
series	journal paper
last changed	2003/04/23 15:14

_id	af94
authors	Anumba, C.J.
year	1996
title	Data structures and DBMS for computer-aided design systems
source	Advances in Engineering Software, 25(2/3), 123-129
summary	The structures for the storage of data in CAD systems influence to a large extent the effectiveness of the system. This paper reviews the wide range of data structures and database management systems (DBMS) available for structuring CAD data. Examples of basic data types are drawn from the MODULA-2 language. The relationship between these basic data types, their composite structures and the classical data models (on which many DBMS are based) is discussed, and the limitations of existing DBMS in modelling CAD data highlighted. A set of requirements for CAD database management systems is drawn up and the emerging role of product models (which seek to encapsulate the totality of data elements required to define fully an engineering artefact) is explored.
series	journal paper
last changed	2003/04/23 15:14

_id	ddssup9602
id	ddssup9602
authors	Arentze, T.A., Borgers, A.W.J. and Harry J.P.
year	1996
title	A knowledge-based model for developing location strategies in a DSS for retail planning
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Most DSS for retail planning are based on impact assessment models to support the evaluation of plan scenario's. This paper introduces a complementary knowledge-based model to support also the earlier stage of formulating plan scenario's. An analysis of the retail planning problem reveals the main lines of the strategies adopted by most Dutch planners and retailers to achieve their goals. A basic strategy that seems to be appropriate in most problem contexts is formulated in the form of a set of decision tables. Each decision table or system of decision tables specifies for a problem area decision rules to identify and analyse problems and to formulate possible actions. The model is implemented in a DSS where it is used in combination with quantitative impact assessment models. A case study in the area of daily good facilities demonstrates the approach. The major conclusion is that the knowledge-based approach and in particular the decision table technique provides interesting possibilities to implement planning task structures in a DSS environment.
series	DDSS
last changed	2003/11/21 15:16

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.041
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c4be
authors	Bock, T., Stricker, D., Fliedner, J. and Huynh, T.
year	1996
title	Automatic generation of the controlling-system for a wall construction robot
source	Automation in Construction 5 (1) (1996) pp. 15-21
summary	In this article we present several important aspects of a software system control. This is designed and developed for a wall assembly robot in an European Esprit III project called ROCCO, RObot assembly system for Computer integrated COnstruction. The system consists of an off-line program for planning of complex assembly tasks and for generating robot actions. The execution is controlled through an adaptive user interface and gives the user the possibilities to switch in an on-line mode command. All the software is designed with the object-oriented concept and implemented in C + +. The wall assembly system is organized on the base of the successive generation of different types of actions, called "Mission", "Task", and "Action". They represent different levels of assembly complexities. Those different actions are organized in a tree structure. Furthermore, the software system can be connected to a CAD-robot simulation software for checking the robot assembly motions. Added to the control system, a recovery module has been implemented for all possible errors during the construction. First the OO-model of the world and of robot activities will be presented. Secondly, several aspects of the algorithm will be explained and at the end we will show the strategy used for the robot motion.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	0dfb
authors	Bovill, C.
year	1996
title	Fractal Geometry in Architecture and Design
source	Design Science Collection, Harvard University, Boston
summary	My intention in this book was to explain the essence of fractal geometry to the design community. Many of the fractals can be drawn by hand and fractal rhythms for use in design can be derived from musical scores. This approach was taken to make the material more approachable. Much of the literature on fractal geometry is hidden behind computer programs or complex mathematical notation systems.
series	other
last changed	2003/04/23 15:14

_id	e309
authors	Breen, Jack and Stellingwerff, Martijn
year	1996
title	A Case for Computer-Assisted Creativity through Clarity, Project 12 CAD and Beyond
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 31-35
summary	A paper exploring the opportunities of different Design Media for the benefit of Architectural and Urban Composition. It is argued that during the design process, the designer develops Models for a projected end result, which are visualised in the form of Images using traditional media. The Computer affords the possibility of creating (virtual) Models from which Images can be taken. Current types of Computer Interfaces still form an obstacle for creative computer assisted design, comparable to Sketching. It is argued that the Clarity of the medium will need to be enhanced, if it is to become an Instrument for truly creative design. Using the example of an educational, practical CAD exercise, the case for' Clarity for the benefit of creative Computing is put forward.
series	plCAD
email
last changed	2003/05/17 10:01

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	d610
authors	Burdea, G.C.
year	1996
title	Force and Touch Feedback for Virtual Reality
source	New York: John Wiley & Sons
summary	Could weight, temperature, and texture combine to bring simulated objects to life? Describing cutting-edge technology that will influence the way we interact with computers for years to come, this pioneering book answers yes: not only is it possible, but devices capable of providing force and tactile sensory feedback already exist. Force and Touch Feedback for Virtual Reality is the first comprehensive source of information on the design, modeling, and applications of force and tactile interfaces for VR. It is a must have for scientists, engineers, psychologists, and developers involved in VR, and for anyone who would like to gain a deeper understanding of this exciting and fast-growing field. Complete with hundreds of tables, figures, and color illustrations, Force and Touch Feedback for Virtual Reality offers * Basic information on human tactile sensing and control and feedback actuator technology * A worldwide survey of force and tactile interface devices, from the simple joystick to full-body instrumented suits based on human factor tests * Step-by-step instructions for realistic physical modeling of virtual object characteristics such as weight, surface smoothness, compliance, and temperature * A unified treatment of the benefits of the new haptic interface technology for simulation and training based on human factor tests * A detailed analysis of optimum control requirements for force and tactile feedback devices * A review of emerging applications in areas ranging from surgical training and entertainment to telerobotics and the military
series	other
last changed	2003/04/23 15:14

_id	ffe2
authors	Carrar, G., Luna, F. and Rajchman, A.
year	1999
title	Cúpulas Telefónicas - Mobiliario Urbano, Diseño Industrial aplicado a una empresa de servicios (Telephone Cupolas - Urban Furniture, Industrial Design Applied to a Company of Services)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 426-409
summary	By november 1996, the state telecomunication company called for a national booth design contest. The idea was to use the awarded design shortly as part of the renovation of the public phone service. Gruppo MDM won the design contest and was contracted to do the manufacture technical drawings and a prototype which was tested during 1997. By 1997, an international bid was held, including the awarded project. Gruppo MDM was contracted for the follow up of the manufacture process, including research of suppliers worldwide, materials arriving on time with the quality required, verifying local suppliers with deadlines and quality controlls according to the specifications.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2020_093
id	caadria2020_093
authors	Cerovsek, Tomo and Martens, Bob
year	2020
title	The Evolution of CAADRIA Conferences - A Bibliometric Approach
doi	https://doi.org/10.52842/conf.caadria.2020.1.325
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 325-334
summary	This paper presents an analysis of the output, impact, use and content of 1,860 papers that were published in the CAADRIA conference proceedings over the last 20+ years (from 1996 to 2019). The applied methodology is a blend of bibliometrics, webometrics and clustering with text mining. The bibliometric analysis leads to quantitative and qualitative results on three levels: (1) author, (2) article and (3) association. The most productive authors authored over 50 papers, and the top 20% authors have over 80 % of all citations generated by CAADRIA proceedings. The overall impact of CAADRIA may be characterised by nearly 2,000 known citations and by the h-index that is 17. The webometrics based on CumInCAD.org reveals that the CAADRIA papers served over 200 k users, which is a considerable visibility for scientific CAAD output. The keywords most frequently used by authors were digital fabrication, BIM and parametric, generative, computational design. Notably, 90% of the papers' descriptors are 2-grams. This study may be useful to researchers, educators and publishers interested in CAAD.
keywords	bibliometrics; open source; text clustering; n-gram
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	275b
authors	Chase, Scott C.
year	1996
title	Design Modeling With Shape Algebras and Formal Logic
doi	https://doi.org/10.52842/conf.acadia.1996.099
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 99-113
summary	A new method of describing designs by combining the paradigms of shape algebras and predicate logic representations is presented. Representing shapes and spatial relations in logic provides a natural, intuitive method of developing complete computer systems for reasoning about designs. The advantages of shape algebra formalisms over more traditional representations of geometric objects are discussed. The method employed involves the definition of a large set of high level design relations from a small set of simple structures and spatial relations. Examples in architecture and geographic information systems are illustrated.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	7b57
authors	Chase, Scott Curland
year	1996
title	Modeling Designs with Shape Algebras and Formal Logic
source	University of California
summary	A formal, hierarchical model of shape, spatial relations and non-spatial properties is presented, constructed from first principles of geometry, topology and logic. The combination of the two major paradigms used here, shape algebras and logic, is one which has been largely unexplored. The underlying interest is the development of generalized design modeling systems in which the components may be used for a variety of synthesis and recognition problems. The algebras of shape described by Stiny have been shown to be useful in the generation and analysis of designs. The generality of their representations, their non-reliance upon predetermined structure, and their use in combination provide a richness of expression lacking in more traditional representations. The use of formal logic as a specification tool for modeling spatial relations is investigated here. Logic has proven itself useful as a programming and specification tool, providing advantages over traditional procedural programming methods. Among those is the ability to specify the knowledge to be encapsulated in a model without the need to specify data manipulation procedures. It is argued that specification in logic provides a natural method of development. The model is developed by extending the formalisms of shape algebras with the use of logic to make more precise, generalized, parametric definitions of shape and spatial relations than has been previously possible. The value of such a model is demonstrated by the use of these generalized spatial relations for solving typical problems in the fields of geographic information systems and architecture. The advantages of the representations used over more traditional 'kit-of-parts' models is also illustrated.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	705d
authors	Chen, C.L. Philip and Sen, Xie
year	1996
title	Freehand drawing system using a fuzzy logic concept
source	Computer-Aided Design, Vol. 28 (2) (1996) pp. 77-89
summary	A pen-based drawing system using a fuzzy logic concept has been developed. The Fuzzy Freehand Drawing System (FFDS) can infer human drawing intentions and generate the corresponding geometric primitivesand smooth B-spline curves. FFDS is a pen-based real time drawing system. On the basis of drawing position, speed, and acceleration information, FFDS establishes geometric primitives. Unintentional points areeliminated using fuzzy filtering rules. FFDS analyses the drawn curve with reference models, and obtains the corresponding possibilities. Fuzzy inference rules are used to recognize the correct model. Finally, thecorrect geometric primitives are drawn automatically.
keywords	Free Curves, Freehand Drawing, Fuzzy Logic
series	journal paper
last changed	2003/05/15 21:33

_id	e9e4
authors	Chevrier, C.
year	1996
title	Handling interactions between real and virtual worlds
source	Proceedings of the International Conference Computer Graphics International’96, pp. 115-125
summary	When compositing computer generated images and photographs or video images, interactions between real and virtual worlds must be taken into account in order to have a good visual result. These interactions are of three kinds: occluding object determination, specular inter-reflection and shadow computation. We first determine which real objects need to be geometrically and/or photometrically modelled for the three sets of interactions. Indeed, not all real surfaces need to be kept for the simulation and rendering steps. The unuseful real surfaces would just increase the rendering time. A rough photometric model can be sufficient for the surface properties, but colour computation has to be made in a particular colour model. Then for each kind of interactions, we take the real surfaces into account in a view-independent illumination step or in the rendering step.
series	other
last changed	2003/04/23 15:14

For more results click below: