Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 8377

Reformat results as: short short into frame detailed detailed into frame

_id	02ac
authors	Wang, Donggen
year	1998
title	Conjoint Approaches to Developing Activity-Based Models
source	Eindhoven University of Technology, Faculty of Architecture and Urban Planning, The Netherlands
summary	Since the late 1950s, transportation models have played an important role in forecasting travel demand and evaluating the impacts of plans and policies. Planners use transportation models to learn about the behavior of transport systems. Over the past decades, the development of particular modeling approaches has closely followed planning needs, which in turn are closely related to dominant policy issues. The first generation of transportation models was developed during the late 1950s and early 1960s. Their purpose was to facilitate the prediction of future travel demand, such that road capacity programs could be based on predicted demand. The first generation models are commonly referred to as four-step models. These models are typically formulated and calibrated at the level of the traffic zones. Individuals are aggregated by traffic zone. Traffic is considered to be the result of four sequential decisions: trip generation, trip distribution, modal split and traffic assignment. These decisions are modeled separately at successive stages. Although the four-step models have been widely used, even institutionalized in literally thousands of applications (Stopher, et al., 1996), the major shortcoming of these large-scale, aggregate and supply-oriented models is their lack of behavioral content.
keywords	Traffic Behaviour; Traffic and Transportation Research
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ddss2006-pb-19
id	DDSS2006-PB-19
authors	Renni Anggraini, Theo Arentze, and Harry Timmermans
year	2006
title	A Model of Within-Households Travel Activity Decisions Capturing Interactions between Household Heads
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Progress in Design & Decision Support Systems in Architecture and Urban Planning, Eindhoven: Eindhoven University of Technology, ISBN-10: 90-386-1756-9, ISBN-13: 978-90-386-1756-5, p. 19-33
summary	This paper describes a conceptual framework for modeling activity interactions between household heads in conducting out-of-home maintenance activities. It is comprised of several steps; generation of household activities, task allocation of household activities, trip-chaining choices, resource allocation and mode choice. The models are specified for different household types: worker and non-worker households, with or without children. The purpose of this paper is to introduce the modeling framework for household travel activity decision making processes so that it can capture interactions between household heads.
keywords	Activity-based modeling, Travel demand, Maintenance activities, Within-household interaction
series	DDSS
last changed	2006/08/29 12:55

_id	fb63
id	fb63
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol 21, no 1, March 1996
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
series	journal paper
type	normal paper
email
last changed	2008/06/12 16:34

_id	2f3c
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol. 21 no 1, March 1996, pp. 22-30
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
keywords	Computer Supported Collaborative Design
series	other
email
last changed	2002/03/05 19:54

_id	735a
authors	Anh, Tran Hoai
year	1992
title	FULL-SCALE EXPERIMENT ON KITCHEN FUNCTION IN HANOI
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 19-30
summary	This study is a part of a licentiate thesis on "Functional kitchen for the Vietnamese cooking way"at the Department of Architecture and Development studies, Lund University. The issues it is dealing with are: (1) Inadequacy of kitchen design in the apartment buildings in Hanoi, where the kitchen is often designed as a mere cooking place - other parts of the food making process are not given any attention. (2) Lack of standard dimensional and planning criteria for functional kitchen which can serve as bases for kitchen design. // The thesis aims at finding out indicators on functional spatial requirements for kitchen, which can serve as guide-line for designing functional kitchen for Hanoi. One of the main propositions in the thesis is that functional kitchens for Hanoi should be organised to permit the culinary activities done according to the Vietnamese urban culinary practice. This is based on the concept that the culinary activity is an expression Of culture, thus the practice of preparing meal in the present context of the urban households in Hanoi has an established pattern, method which demand a suitable area and arrangement in the kitchen. This pattern and cooking method should make up the functional requirement for kitchen in Hanoi, and be taken in to account if functional kitchen designing is to be achieved. In the context of the space-limited apartment building of Hanoi, special focus is given to find out indicators on the minimum functional spatial requirements of the kitchen works.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:29

_id	ddss2008-43
id	ddss2008-43
authors	Katoshevski, Rachel; Theo Arentze and Harry Timmermans
year	2008
title	Simulating Urban Dynamics Using a Combination of CellularAutomata and Activity-Based Models
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Cellular automata models of urban change have been criticised for their lack of behavioural theory and representation in simulating urban change. It has led to a plea for developing multi-agent models. As a first step into this direction, this paper discusses the formulation of a combination of a cellular automata representation for an initial configuration of land use. This is linked to an activity-based model of travel demand, which generates varying demand for facilities across space. Agents, representing facility providers respond to this demand in locating and resizing their facilities. The interplay between these components then results in urban dynamics. The model is illustrated using a hypothetical example of urban forms.
keywords	Cellular automata, Activity-Based Modelling, Urban dynamics
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-07
id	ddss2008-07
authors	Nijland, Linda; Theo Arentze and Harry Timmermans
year	2008
title	Multi-Day Activity Scheduling Reactions to FutureEvents in a Dynamic Agent-Based Model of Activity-Travel Behaviour
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In the context of activity-based transport simulation models, multi-day activity planning is receiving increasing attention. The aim of this paper is to develop and illustrate an extension of a needs-based model of activity generation that takes into account possible influences of pre-planned activities and events. This paper describes the theory and shows the results of simulations of the extension. The simulation was done for six different activities and different parameter values. The results show that the model works well and the influences of the parameters are clear and seem logical.
keywords	Travel Demand, Activity-Based Modelling, Activity Generation, Activity Scheduling, Needs, Multi-Day Activity Planning
series	DDSS
last changed	2008/09/01 17:06

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.041
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6c97
authors	Asanowicz, Aleksander
year	1996
title	Using the Computer in Analysis of Architectural Form
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 25-34
summary	One of the most important aspects of the designing process is: the design activity is usually conducted with incomplete information. Another important aspect of designing activity is: designing activity is usually based on past experience. As a matter of fact looking at designers in the early conceptual phases, one thing that appears clear is, instead starting from scratch, they spend a part of their time thinking about existing designing experience, reviewing the literature, and so on. That is why explicit representation of designing knowledge is needed if computers are to be used as the aid of design education and practice. Composition knowledge data base will be helpful during an architectural form analysis process as well. It makes possible to provide answers and explanations as well as allowing to view tutorials illustrating the particular problem. On its basic level such a program will present analysis of architectural objects and abstract forms based on subjective criteria. On its upper level allowing further exploration of various architectural composition attributes, as well as their influence on emotional- aesthetic judgements being formed during the process of analysis the architectural form.
series	other
last changed	1999/04/08 17:16

_id	d610
authors	Burdea, G.C.
year	1996
title	Force and Touch Feedback for Virtual Reality
source	New York: John Wiley & Sons
summary	Could weight, temperature, and texture combine to bring simulated objects to life? Describing cutting-edge technology that will influence the way we interact with computers for years to come, this pioneering book answers yes: not only is it possible, but devices capable of providing force and tactile sensory feedback already exist. Force and Touch Feedback for Virtual Reality is the first comprehensive source of information on the design, modeling, and applications of force and tactile interfaces for VR. It is a must have for scientists, engineers, psychologists, and developers involved in VR, and for anyone who would like to gain a deeper understanding of this exciting and fast-growing field. Complete with hundreds of tables, figures, and color illustrations, Force and Touch Feedback for Virtual Reality offers * Basic information on human tactile sensing and control and feedback actuator technology * A worldwide survey of force and tactile interface devices, from the simple joystick to full-body instrumented suits based on human factor tests * Step-by-step instructions for realistic physical modeling of virtual object characteristics such as weight, surface smoothness, compliance, and temperature * A unified treatment of the benefits of the new haptic interface technology for simulation and training based on human factor tests * A detailed analysis of optimum control requirements for force and tactile feedback devices * A review of emerging applications in areas ranging from surgical training and entertainment to telerobotics and the military
series	other
last changed	2003/04/23 15:14

_id	80f7
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2001
title	Knowledge-based System to Support Architectural Design - Intelligent objects, project net-constraints, collaborative work
doi	https://doi.org/10.52842/conf.ecaade.2001.080
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 80-85
summary	The architectural design business is marked by a progressive increase in operators all cooperating towards the realization of building structures and complex infrastructures (Jenckes, 1997). This type of design implies the simultaneous activity of specialists in different fields, often working a considerable distance apart, on increasingly distributed design studies. Collaborative Architectural Design comprises a vast field of studies that embraces also these sectors and problems. To mention but a few: communication among operators in the building and design sector; design process system logic architecture; conceptual structure of the building organism; building component representation; conflict identification and management; sharing of knowledge; and also, user interface; global evaluation of solutions adopted; IT definition of objects; inter-object communication (in the IT sense). The point of view of the research is that of the designers of the architectural artefact (Simon, 1996); its focus consists of the relations among the various design operators and among the latter and the information exchanged: the Building Objects. Its primary research goal is thus the conceptual structure of the building organism for the purpose of managing conflicts and developing possible methods of resolving them.
keywords	Keywords. Collaborative Design, Architectural And Building Knowledge, Distributed Knowledge Bases, Information Management, Multidisciplinarity
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ae9f
authors	Damer, B.
year	1996
title	Inhabited Virtual Worlds: A New Frontier for Interaction Design
source	Interactions, Vol.3, No.5 ACM
summary	In April of 1995 the Internet took a step into the third dimension with the introduction of the Virtual Reality Modeling Language (VRML) as a commercial standard. Another event that month caused fewer headlines but in retrospect was just as significant. A small company from San Francisco, Worlds Incorporated, launched WorldsChat, a three dimensional environment allowing any Internet user to don a digital costume, or avatar, and travel about and converse with other people inhabiting the space. WorldsChat was appropriately modeled on a space station complete with a central hub, hallways, sliding doors, windows, and escalators to outlying pods.
series	journal paper
last changed	2003/04/23 15:50

_id	9a0d
authors	Debevec, P.E., Taylor, C.J. and Malik, J.
year	1996
title	Modeling and rendering architecture from photographs: a hybrid geometry- and image-based approach
source	SIGGRAPH'96, New Orleans, Louisiana
summary	We present a new approach for modeling and rendering existing architectural scenes from a sparse set of still photographs. Our modeling approach, which combines both geometry-based and imagebased techniques, has two components. The first component is a photogrammetricmodelingmethodwhich facilitates the recovery of the basic geometry of the photographed scene. Our photogrammetric modeling approach is effective, convenient, and robust because it exploits the constraints that are characteristic of architectural scenes. The second component is a model-based stereo algorithm, which recovers how the real scene deviates from the basic model. By making use of the model, our stereo technique robustly recovers accurate depth from widely-spaced image pairs. Consequently, our approach canmodel large architectural environmentswith far fewer photographs than current image-based modeling approaches. For producing renderings, we present view-dependent texture mapping, a method of compositing multiple views of a scene that better simulates geometric detail on basic models. Our approach can be used to recover models for use in either geometry-based or image-based rendering systems. We present results that demonstrate our approach's ability to create realistic renderings of architectural scenes from viewpoints far from the original photographs.
series	other
last changed	2003/04/23 15:50

_id	5fc4
authors	Fruchter, R.
year	1996
title	Conceptual Collaborative Building Design Through Shared Graphics
source	IEEE Expert special issue on Al in Civil Engineering, June vol. 33-41
summary	The Interdisciplinary Communication Medium computer environment integrates a shared graphic modeling environment with network-based services to accommodate many perspectives in an architecture/engineering/construction team. Communication is critical for achieving better cooperation and coordination among professionals in a multidisciplinary building team. The complexity of large construction projects, the specialization of the project participants, and the different forms of synchronous and asynchronous collaborative work increase the need for intensive information sharing and exchange. Architecture/engineering/construction (A/E/C) professionals use computers to perform a specific discipline's tasks, but they still exchange design decisions and data using paper drawings and documents. Each project participant investigates and communicates alternative solutions through representational idioms that are private to that member's profession. Other project participants must then interpret, extract, and reenter the relevant information using the conventional idioms of their disciplines and in the format required by their tools. The resulting communication difficulties often affect the quality of the final building and the time required to achieve design consensus. This article describes a computer environment, the Interdisciplinary Communication Medium (ICM), that supports conceptual, collaborative building design. The objective is to help improve communication among professionals in a multidisciplinary team. Collaborative teamwork is an iterative process of reaching a shared understanding of the design and construction domains, the requirements, the building to be built, and the necessary commitments. The understanding emerges over time, as team members begin to grasp their own part of the project, and as they provide information that lets others progress. The fundamental concepts incorporated in ICM include A communication cycle for collaborative teamwork that comprises propose-interpret-critique-explain-change notifications. An open system-integration architecture. A shared graphic modeling environment for design exploration and communication. A Semantic Modeling Extension (SME), which introduces a structured way to capture design intent. A change-notification mechanism that documents notes on design changes linked to the graphic models, and routes change notifications. Thus, the process involves communication, negotiation, and team learning.
series	journal paper
last changed	2003/04/23 15:14

_id	3386
authors	Gavin, L., Keuppers, S., Mottram, C. and Penn, A.
year	2001
title	Awareness Space in Distributed Social Networks
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 615-628
summary	In the real work environment we are constantly aware of the presence and activity of others. We know when people are away from their desks, whether they are doing concentrated work, or whether they are available for interaction. We use this peripheral awareness of others to guide our interactions and social behaviour. However, when teams of workers are spatially separated we lose 'awareness' information and this severely inhibits interaction and information flow. The Theatre of Work (TOWER) aims to develop a virtual space to help create a sense of social awareness and presence to support distributed working. Presence, status and activity of other people are made visible in the theatre of work and allow one to build peripheral awareness of the current activity patterns of those who we do not share space with in reality. TOWER is developing a construction set to augment the workplace with synchronous as well as asynchronous awareness. Current, synchronous activity patterns and statuses are played out in a 3D virtual space through the use of symbolic acting. The environment itself however is automatically constructed on the basis of the organisation's information resources and is in effect an information space. Location of the symbolic actor in the environment can therefore represent the focus of that person's current activity. The environment itself evolves to reflect historic patterns of information use and exchange, and becomes an asynchronous representation of the past history of the organisation. A module that records specific episodes from the synchronous event cycle as a Docudrama forms an asynchronous information resource to give a history of team work and decision taking. The TOWER environment is displayed using a number of screen based and ambient display devices. Current status and activity events are supplied to the system using a range of sensors both in the real environment and in the information systems. The methodology has been established as a two-stage process. The 3D spatial environment will be automatically constructed or generated from some aspect of the pre-existing organisational structure or its information resources or usage patterns. The methodology must be extended to provide means for that structure to grow and evolve in the light of patterns of actual user behaviour in the TOWER space. We have developed a generative algorithm that uses a cell aggregation process to transcribe the information space into a 3d space. In stage 2 that space was analysed using space syntax methods (Hillier & Hanson, 1984; Hillier 1996) to allow the properties of permeability and intelligibility to be measured, and then these fed back into the generative algorithm. Finally, these same measures have been used to evaluate the spatialised behaviour that users of the TOWER space show, and will used to feed this back into the evolution of the space. The stage of transcription from information structure to 3d space through a generative algorithm is critical since it is this stage that allows neighbourhood relations to be created that are not present in the original information structure. It is these relations that could be expected to help increase social density.
keywords	Algorithmic Form Generation, Distributed Workgroups, Space Syntax
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ddssar9619
id	ddssar9619
authors	Kanoglu, Aiaattin
year	1996
title	A Site-Based Computerized Production Planning & Control Model for The Plants which Produce Prefabricated Building Components
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The "open systems" in building prefabrication may be qualified more flexible to some extent compared to the closed ones and may use the tools and approaches used in industrial production areas for the estimation of demand and production. As for the closed systems in particular, it is not possible for these systems to apply this kind of approach. Their production must be based on absolutely assured demands and projects. Because of this, they need detailed projects and assembly schedules for produc-tion. As a result of this, their production modes can be qualified "custom-made" type and production planning functions must provide the demand values from the assembly schedules of contracted proj-ects. The problem can be solved by integrating the work schedules of the sites that are served by fac-tory. Integration of data on a computerized system will be preferable and it is possible to realize the model in two alternative ways. The first is developing a new conceptual model and convert it into a software and the second is developing an approach for customizing general purpose project planning and programming software for using them in production planning. The second solution is studied in the paper following this. The aim of this study is to develop the principals of a conceptual model for an Integrated Data Flow and Evaluation System for production planning in prefabrication and to con-vert this model into an applicable and objective computer-aided model.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9618
id	ddssar9618
authors	Kanoglu, Alaattin
year	1996
title	Application of General Purpose Project Planning & Programming Software for Production Planning & Control in Plants which Produce Prefabricated Building Components
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The "open systems" in building prefabrication may be qualified more flexible to some extent compared to the closed ones and may use the tools and approaches used in industrial production areas for the es-timation of demand and production. As for the closed systems in particular, it is not possible for these systems to apply this kind of an approach. Their production must be based on absolutely assured de-mands and projects. Because of this, they need detailed projects and assembly schedules for produc-tion. As a result of this, their production modes can be qualified "custom-made" type and production planning functions must provide the demand values from the assembly schedules of contracted pro-jects. The problem can be solved by integrating the work schedules of the sites that are served by fac-tory. Integration of data on a computerized system will be preferable and it is possible to realize the model in two alternative ways. The first is developing a new conceptual model and convert it into a software and the second is developing an approach for customizing general purpose project planning and programming software for using them in production planning. The second solution is studied in the paper following this. The aims of this study are analyzing outstanding general purpose project planning & programming software from the point of view of requirements of production planning function and their customizability; comparing the requirements of the model designed for production planning and capabilities of general purpose planning software and developing the conceptual and practical dimensions and basic principals of the model for using the general purpose planning and programming software for production planning.
series	DDSS
last changed	2003/08/07 16:36

_id	6237
authors	Kiechle, Horst
year	1996
title	CONSTRUCTING THE AMORPHOUS
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Constructing the Amorphous entails the ongoing research into a concept which aims to develop a new understanding for Art, Design and Architecture within society. Rigid, reductivist and confrontational methods based on static geometry, prejudice and competition are to be replaced by dynamic, interdisciplinary and integrative models. In his current art practice the author simulates existing architectural spaces whose interior are re-designed into sculpted environments, based on creative irregularity rather than idealised geometry. All the computer simulated “soft” environments can be realised on an architectural scale as temporary installations with the curved surfaces approximated through planar polygons cut from sheet materials. Within this framework the Darren Knight Gallery Project represents the most recently example. The paper discusses furthermore various 3D modeling options, such as standard CAD representations, high quality rendered video walk-throughs, VRML models and physically produced, full-scale models, made of corrugated cardboard. The cost and equipment requirements necessary for full-scale modeling in cardboard are outlined.
keywords	VRML, CAD, 3D Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:40

_id	c4ae
id	c4ae
authors	Knapp, Robert W. and McCall, Raymond
year	1996
title	PHIDIAS II - In Support of Collaborative Design
doi	https://doi.org/10.52842/conf.acadia.1996.147
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 147-154
summary	The World Wide Web in combination with Java and Virtual Reality Modeling Language (VRML) create great opportunities for collaboration by distributed design teams. To take advantage of these opportunities, we have begun to create a version of the PHIDIAS hyperCAD system (McCall, Bennett and Johnson 1994) that will support communication and collaboration among designers over the Word Wide Web. PHIDIAS is an intelligent, hypermedia-based system for computer-aided design. Our strategy is to divide PHIDIAS into two parts: 1) a client-side user interface and 2) a server-side hyperCAD database engine. The client-side interface is being implemented using Java and VRML. Implementing the PHIDIAS front-end with Java enables program code distribution via the World Wide Web. VRML provides PHIDIAS with client-side computation and display of 3D graphics.
series	ACADIA
last changed	2022/06/07 07:51

_id	8ee5
authors	Koutamanis, A., Mitossi, V.
year	1996
title	SIMULATION FOR ANALYSIS: REQUIREMENTS FROM ARCHITECTURAL DESIGN
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Computerization has been a positive factor in the evolution of both kinds of analysis with respect to cost, availability and efficiency. Knowledge-based systems offer an appropriate implementation environment for normative analysis which can be more reliable and economical than evaluation by human experts. Perhaps more significant is the potential of interactive computer simulation where designs can be examined intuitively in full detail and at the same time by quantitative models. The advantages of this coupling are evident in the achievements of scientific visualization. Another advantage of computational systems is that the analysis can be linked to the design representation, thereby adding feedback to the conventional visualization of designs in drawing and modeling systems. Such connections are essential for the development of design guidance systems capable of reflecting consequences of partial inadequacies or changes to other aspects in a transparent and meaningful network of design constraints. The possibilities of computer simulation also extend to issues inadequately covered by normative analysis and in particular to dynamic aspects of design such as human movement and circulation. The paper reports on a framework for addressing two related problems, (a) the simulation of fire escape from buildings and (b) the simulation of human movement on stairs. In both cases we propose that current evaluation techniques and the underlying design norms are too abstract to offer a measure of design success, as testified by the number of fatal accidents in fires and on stairs. In addition, fire escape and stair climbing are characterized by great variability with respect to both the form of the possible designs and the profiles of potential users. This suggests that testing prototypical forms by typical users and publishing the results as new, improved norms is not a realistic proposition for ensuring a global solution. Instead, we should test every design individually, within its own context. The development of an affordable, readily available system for the analysis and evaluation of aspects such as fire escape and stair safety can be based on the combination of the technologies of virtual reality and motion capture. Testing of a design by a number of test people in an immersion space provides not only intuitive evaluations by actual users but also quantitative data on the cognitive and proprioceptive behaviour of the test people. These data can be compiled into profiles of virtual humans for further testing of the same or related designs.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:40

For more results click below: