Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3568

Reformat results as: short short into frame detailed detailed into frame

_id	31f5
authors	Alfares, M. and Seireg, A.
year	1996
title	An integrated system for computer-aided design and construction of reinforced concrete buildings using modular forms
source	Automation in Construction 5 (4) (1996) pp. 323-341
summary	The study reported in this paper investigates the feasibility of automating the on-site construction of reinforced concrete residential buildings. The basic construction tasks are identified, analyzed and modified with a view towards potential for automation. Emphasis is placed on developing modular forms that facilitate automation. The majority of work in the field of construction robotics has focused on the adaptation of existing industrial robots to automate traditional construction processes. This paper outlines a computer-aided construction system approach specially suited for integrating design and implementation by on-site robots. A Computer-Integrated Construction (CIC) system, similar to CIM, is developed that includes a CIC data-base, a construction design system, a construction production/process planning system, and a robotics execution system. This approach is intended to minimize the redesign effort as well as the need for on-site manual work.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	88f9
authors	Carrara, G., Novembri, G., Zorgno, A.M., Brusasco, P.L.
year	1997
title	Virtual Studio of Design and Technology on Internet (I) - Educator's approach
doi	https://doi.org/10.52842/conf.ecaade.1997.x.n2w
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper presents a teaching experience involving students and professors from various universities, in Italy and abroad, which began in 1996 and is still on going. The Virtual Studios on the Internet (VSI) have some features in common with the Teaching Studios planned for the new programme of the faculties of Architecture in Italian universities. These are the definition of a common design theme, and the participation of disciplinary teachers. The greatest difference is in the modes of collaboration, which is achieved through information and communication technologies. The chief result of this is that the various work groups in different places can work and collaborate at the same time: the computer networks provide the means to express, communicate and share the design project.
keywords	CAAD, Teaching of architectural design, Shared virtual reality, Virtualdesign studio, Collective intelligence.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/lvi_i&ii/zorgno.html
last changed	2022/06/07 07:50

_id	3905
authors	Duffy, T.M. and Cunningham, D.J.
year	1996
title	Constructivism: Implications for the design and delivery of instruction
source	D.H. Jonassen, (Ed) Handbook of research for educational communications and technology, N.Y; Macmillan Library reference USA
summary	This will be a seminar that examines Constructivist theory as it applies to our thinking about instruction. Many folks think of constructivism as a method of instruction -- it is not. It is a framework for thinking about learning or what it means to come to know. As such, it is a framework for understanding (interpreting) any learning environment as well as a framework for designing instruction. The seminar will be organized around weekly readings. We will examine the alternative constructivist theories, e.g., socio-cultural constructivism and cognitive constructivism, and the pragmatism of Richard Rorty. However, rather than focusing on the differences between these frameworks, our emphasis will be on the implications of the broader, common framework for the design of instruction. Hence we will spend most of the semester discussing strategies for designing and delivering instruction, e.g., the work of Bransford, Collins, Pea, Jonassen, Spiro, Fosnot, Senge, and Schank. We will consider both business and schooling environments for learning -- there is significant work in both domains. There will be particular emphasis of the use of technology in instruction. We will look at the communication, information, and context providing roles of technology as contrasted to the traditional approach of using technology to deliver instruction (to teach). We will also pay particular attention to problem based learning as one instructional model. In PBL there is particular emphasis on the role of the facilitator as a learning coach (process orientation) as opposed to a content provider. There is also a particular emphasis on supporting the development of abductive reasoning skills so that the learner develops the ability to be an effective problem solver in the content domain. The major paper/project for the course will be the design of instruction to train individuals to be learning coaches in a problem based learning or goal based scenario learning environment. That is, how do you support teachers in adapting the role of learning coach (which, of course, requires us to understand what it means to be a learning coach). Design teams will be formed with the teams all working on this same design problem. A comprehensive prototype of the learning environment is required as well as a paper provide the theoretical framework and rationale for the design strategy. While not required, I would expect that computer technology will play a significant role in the design of your learning environment. With that in mind, let me note that it is not required that the prototype be delivered on the computer, i.e., I am not requiring programming skills but rather design skills and so "storyboards" is all that is required.
series	other
last changed	2003/04/23 15:14

_id	c37f
authors	Resnick, M., Bruckman, A. and Martin, F.
year	1996
title	Pianos Not Stereos: Creating Computational Construction Kits
source	Interactions, 3 (6)
summary	The stereo has many attractions: it is easier to play and it provides immediate access to a wide range of music. But "ease of use" should not be the only criterion. Playing the piano can be a much richer experience. By learning to play the piano, you can become a creator (not just a consumer) of music, expressing yourself musically in ever-more complex ways. As a result, you can develop a much deeper relationship with (and deeper understanding of) music. So too with computers. In the field of educational technology, there has been too much emphasis on the equivalent of stereos and CDs, and not enough emphasis on computational pianos. In our research group at the MIT Media Lab, we are developing a new generation of "computational construction kits" that, like pianos, enable people to express themselves in ever-more complex ways, deepening their relationships with new domains of knowledge.
series	journal paper
last changed	2003/04/23 15:50

_id	6966
authors	Chuah, M.C., Roth, S.F., Kolojejchick, J., Mattis, J. and Juarez, O.
year	1995
title	SageBook: Searching data-graphics by content
source	Proceedings of CHI , ACM Press
summary	Currently, there are many hypertext-like tools and database retrieval systems that use keyword search as a means of navigation. While useful for certain tasks, keyword search is insufficient for browsing databases of data-graphics. SageBook is a system that searches among existing data-graphics, so that they can be reused with new data. In order to fulfill the needs of retrieval and reuse, it provides: 1) a direct manipulation, graphical query interface; 2) a content description language that can express important relationships for retrieving data-graphics; 3) automatic description of stored data-graphics based on their content; 4) search techniques sensitive to the structure and similarity among data-graphics; 5) manual and automatic adaptation tools for altering data-graphics so that they can be reused with new data.
series	other
last changed	2003/04/23 15:50

_id	ddss9429
id	ddss9429
authors	Geerling, Heinrich
year	1994
title	A Proposal for a Framework for Business Re-engineering in Design and Realization of Artificial Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	According to the Top-Down design process', this paper gives a generic and qualitative description of a Concurrent Engineering Environment, that should support the problem solving procedure in town planning and architecture in a modern quality oriented society. A system that is based on the principal of democracy might guarantee the preservation of quality in the projection and realization of artificial environments. This environment can be seen as a part of the today often discussed "digital democracy", which practically is based on a infrastructure of computers, interfaces, software systems, a network, databases and a data presentation, that is able to comprise the expectations of professionals involved in the architecture and town planning process. The paper will discuss what the role of the designer and coordinator of this computer environment looks like,in order to design, plan, build and coordinate activities for the realization of this Concurrent Environment and how several software engineers work concurrently to develop tools that guarantee a modular integration. The backbone of this environment is the definition and use of standards for data exchange. Basically those standards are derived from two domains: artifacts will be described in a product model data, while natural resources are described in spatial data. Town planning has to integrate both models. It will be discussed briefly how far the data modelling language EXPRESS of part 11 of the ISO 10303 (Express Language Reference Manual) might be useful to model GIS related problems. An example will describe how a scenario of activities, from registration of real world data to recognition of requirements of society, the definition of development plans through design(competition), lawfulness checking and construction until demolition should look like.
series	DDSS
email
last changed	2003/08/07 16:36

_id	caadria2019_109
id	caadria2019_109
authors	Kim, Jinsung, Song, Jaeyeol and Lee, Jin-Kook
year	2019
title	Approach to Auto-recognition of Design Elements for the Intelligent Management of Interior Pictures
doi	https://doi.org/10.52842/conf.caadria.2019.2.785
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 785-794
summary	This paper explores automated recognition of elements in interior design pictures for an intelligent design reference management system. Precedent design references have a significant role to help architects, designer and even clients in general architecture design process. Pictures are one of the representation that could exactly show a kind of design idea and knowledge. Due to the velocity, variety and volume of reference pictures data with growth of references platform, it is hard and time-consuming to handle the data with current manual way. To solve this problem , this paper depicts a deep learning-based approach to figuring out design elements and recognizing the design feature of them on the interior pictures using faster-RCNN and CNN algorithms. The targets are the residential furniture such as a table and a seating. Through proposed application, input pictures can automatically have tagging data as follows; seating1(type: sofa, seating capacity: two-seaters, design style: classic)
keywords	Interior design picture; Design element; Design feature; Automated recognition; Design Reference management
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	1fb3
authors	Akin, O., Cumming, M., Shealey, M. and Tuncer, B.
year	1997
title	An electronic design assistance tool for case-based representation of designs
source	Automation in Construction 6 (4) (1997) pp. 265-274
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case-based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case-base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4cda
authors	Akin, O., Cumming, M. , Shealey, M. and Tuncer, B.
year	1996
title	An Electronic Design Assistance Tool for Case Based Representation of Designs
doi	https://doi.org/10.52842/conf.acadia.1996.123
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 123-132
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996, and will be used in future studios, as well.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	8a25
authors	Alshawi, M. and Underwood, J.
year	1996
title	Applying object-oriented analysis to the integration of design and construction
source	Automation in Construction 5 (2) (1996) pp. 105-121
summary	This paper implements an Object Oriented Analysis technique to model information related to design and construction. In a previous study, an approach to integrate design and construction processes based upon information analysis and modelling has been proposed. By breaking down the project's vast information into groups of related information, construction related problems have been identified and then traced back too their relevant design processes. This paper models this process using a relatively young and new method of analysis rather than a traditional structured approach. An Object-Oriented Analysis (OOA) method has been applied to model the information in terms of the fundamental ideas that underlie object-oriented technology i.e. object types and classes, methods, requests, encapsulation and inheritance. Proceeding through the five major activities of Coad and Yourdon's OOA method, a complete OOA model has been developed with potential to improve the construction related problems.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	aa7c
authors	Amirante, M. Isabella and Burattini, Ernesto
year	1996
title	Automatic Procedures for Bio-Climatic Control
doi	https://doi.org/10.52842/conf.ecaade.1996.029
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 29-40
summary	The experiences illustrated here are related to the new regulation of teaching architecture in Italy and these ones in particular have been concentrated on the technological aspects of teaching architecture. We can consider the evolution of the architect from the individual operator to the manager multi- disciplinary aspects of the building process ( building process manager) as a reality today. Information technology, specifically applied to bio-climatic architecture and environmental control, can be of great importance for this professional role, and for this reason it is very useful to include these topics at the beginning the teaching design process. This paper describes a particular approach to bio-climatic problems of the architectural project. An experimental course has been performed by the second year students of the "Laboratorio di Construzione dell' Architettura", at the School of Architecture of the Second University of Naples, in Aversa. Analysing old and new buildings, they used some flow charts for the evaluation and representation of energetic behaviour of buildings regarding their climatic and geographical environment. In the flow charts the decisions are represented by boxes that allow to determine "rightness index" related to: morphological characters of the site and environment, typology and particular organisation of the inside spaces, shape of building, technological solution of the building "skin". The navigation through the decision boxes is made with simple options like; "winds: protected or exposed site", "shape of building; free, close or cross plane", "presence of trees on the south,; yes or not",; it shows the students the bio-climatic quality of the building and, through numeric value assigned to each option, determines the "weight" of its climatic comfort.
series	eCAADe
last changed	2022/06/07 07:54

_id	0f0e
authors	Andrzejewski, H. and Rostanski, K.
year	1996
title	Landscape Design Tool of Wide Ecological Aspect
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 7-12
summary	The article shows new tool prepared in two Technical Universities in Poland. The packet as a whole, of its current condition, is mainly elaborated by Henryk Andrzejewski at Faculty of Architecture of Wroclaw Technical University. Plant and vegetation units specifier is so far prepared by Krzysztof M. Rostahski and Mirostaw Rogula at Faculty of Architecture of Silesian Technical University. The packet allows to create the new text database of plants and to add the external data to the existing database, to change, to view and to search the data of the existing database of plants in accordance with the selection based on nongraphic search criteria. The packet finally will have 4 modules. One of them is .plant end vegetation units specifier', some details of that are shown here. New aspect is in contents of database which helps to estimate ecological influence of designed group of plants on our body and mind.
series	plCAD
last changed	2003/05/17 10:01

_id	ddssup9603
id	ddssup9603
authors	Bach, Boudewijn and MacGillivray, Trina
year	1996
title	Semi-manual design support for increasing railwaystation catchment & sustainable traffic routing
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The shape ('configuration'), location and direction of the pattern of potential trips by foot or bicycle can help decision makers and designers:- the shape of such a pattern informs about the potential size of a traffic calming area(such as 30Km-zoning),- the location of such a pattern refers to the user-groups and specific destinations that a urban network should bring in safe reach for dictated groups,- the direction of such a pattern, together with shape and location, points to the best routing to raise the Sustainable Traffic Modal Split or to improve the reach of destinations like a railway-station.The patters can be generated from zip-code's of user-groups with obvious and daily destinations (school-children, rail-passengers). The next step confronts the theoretical pattern with the layout of streets and the traffic flow, mapping or listing (potential) confrontations between cars and the non-motorised modes, a basis for economical investment in traffic-safety.A design can 'model' the analysed pattern(s) to a economic, direct and safe base (cycle or pedestrian) network. In co-operation, the Dutch the traffic consultant "Verkeersadviesbureau Diepens & Okkema" in Delft, The Netherlands and the Faculty of Architecture, Delft University of Technology, in Delft, The Netherlands, develloped the semi-manual design & decision support system "STAR-Analysis"
series	DDSS
last changed	2003/11/21 15:16

_id	62c0
authors	Barrallo, Javier and Iglesias, Alberto
year	1996
title	Cybersculpture
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 35-43
summary	From the first artistic expressions of mankind, the Mathematics has influence the shapes and proportions presents in the different artistic disciplines. The coming of Abstract art and modern Mathematics at the beginning of the century supposed a complete renovation of the way of understand the relationship between Mathematics and Art, reinforced by the huge expansion of computers nowadays. Chaos Theory or Fractal Geometry constitute examples of this tendencies, that normally are expressed in the two dimensional plane. The idea of this work consists on the utilisation of a series of elements from the contemporaneous Mathematics to express them in an artistic way in the three dimensional space. The result is a family of objects that we have called CYBERSCULPTURES, due to their sculptural character and the fact that they have Internet as their virtual museum.
series	other
last changed	1999/04/08 17:16

_id	ddssar9638
id	ddssar9638
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	1996
title	A Conceptual Model for Concurrent Engineering in Building Design according to Domain Theory
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Concurrent engineering is a design strategy in which various designers participate in a co-ordinated parallel process. In this process series of functions are simultaneously integrated into a common form. Processes of this type ask for the identification, definition and specification of relatively independent design fields. They also ask for specific design knowledge designers should master in order to participate in these processes. The paper presents a conceptual model of co-ordinated parallel design processes in which architectural space is simultaneously defined in the intersection of three systems: a morphological or level-bound system, a functional or domain-bound system and a procedural or phase-bound system. Design strategies for concurrent engineering are concerned with process design, a design task which is comparable to the design of objects. For successfully accomplishing this task, knowledge is needed of the structural properties of objects and systems; more specifically of the morphological, functional and procedural levels which condition the design fields from which these objects emerge, of the series of generic forms which condition their appearance and of the typological knowledge which conditions their coherence in the overall process.
series	DDSS
last changed	2003/11/21 15:16

_id	c872
authors	Beliveau, Y.J., Fithian, J.E. and Deisenroth, M.P.
year	1996
title	Autonomous vehicle navigation with real-time 3D laser based positioning for construction
source	Automation in Construction 5 (4) (1996) pp. 261-272
summary	Autonomous Guided Vehicles (AGVs) are a way of life in manufacturing where navigation can be done in a structured environment. Construction is an unstructured environment and requires a different type of navigation system to deal with three dimensional control and rough terrain. This paper provides a review of navigation systems that utilize dead-reckoning in conjunction with absolute referencing systems such as beacon-based systems, and vision and mapping based system. The use of a real-time laser based technology is demonstrated as a new form of navigation. This, technology does not rely on dead reckoning. The paper outlines the issues and strategies in guiding an autonomous vehicle utilizing only the laser-based positioning system. Algorithms were developed to provide real-time control of the AGV. The laser based positioning system is unique in that it provides three dimensional position data with five updates per second. No other system can provide this level of performance. This allows for control of end effectors and autonomous vehicles in complex and unstructured three dimensional environments. The use of this new type of navigation makes possible the automation of large complex assemblies in rough terrain such as construction.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a04a
authors	Bhavnani, S.K. and John, B.E.
year	1996
title	Exploring the Unrealized Potential of Computer-Aided Drafting
source	Proceedings of CHI'96 (1996), 332-339
summary	Despite huge investments by vendors and users, CAD productivity remains disappointing. Our analysis of real- world CAD usage shows that even after many years of experience, users tend to use suboptimal strategies to perform complex CAD tasks. Additionally, some of these strategies have a marked resemblance to manual drafting techniques. Although this phenomenon has been previously reported, this paper explores explanations for its causes and persistence. We argue that the strategic knowledge to use CAD effectively is neither defined nor explicitly taught. In the absence of a well-formed strategy, users often develop a synthetic mental model of CAD containing a mixture of manual and CAD methods. As these suboptimal strategies do not necessarily prevent users from producing clean, accurate drawings, the inefficiencies tend to remain unrecognized and users have little motivation to develop better strategies. To reverse this situation we recommend that the strategic knowledge to use CAD effectively should be made explicit and provided early in training. We use our analysis to begin the process of making this strategic knowledge explicit. We conclude by discussing the ramifications of this research in training as well as in the development of future computer aids for drawing and design.
keywords	Task Decomposition; Learning
series	other
email
last changed	2003/11/21 15:16

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	e309
authors	Breen, Jack and Stellingwerff, Martijn
year	1996
title	A Case for Computer-Assisted Creativity through Clarity, Project 12 CAD and Beyond
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 31-35
summary	A paper exploring the opportunities of different Design Media for the benefit of Architectural and Urban Composition. It is argued that during the design process, the designer develops Models for a projected end result, which are visualised in the form of Images using traditional media. The Computer affords the possibility of creating (virtual) Models from which Images can be taken. Current types of Computer Interfaces still form an obstacle for creative computer assisted design, comparable to Sketching. It is argued that the Clarity of the medium will need to be enhanced, if it is to become an Instrument for truly creative design. Using the example of an educational, practical CAD exercise, the case for' Clarity for the benefit of creative Computing is put forward.
series	plCAD
email
last changed	2003/05/17 10:01

For more results click below: