Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2520

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar9638
id	ddssar9638
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	1996
title	A Conceptual Model for Concurrent Engineering in Building Design according to Domain Theory
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Concurrent engineering is a design strategy in which various designers participate in a co-ordinated parallel process. In this process series of functions are simultaneously integrated into a common form. Processes of this type ask for the identification, definition and specification of relatively independent design fields. They also ask for specific design knowledge designers should master in order to participate in these processes. The paper presents a conceptual model of co-ordinated parallel design processes in which architectural space is simultaneously defined in the intersection of three systems: a morphological or level-bound system, a functional or domain-bound system and a procedural or phase-bound system. Design strategies for concurrent engineering are concerned with process design, a design task which is comparable to the design of objects. For successfully accomplishing this task, knowledge is needed of the structural properties of objects and systems; more specifically of the morphological, functional and procedural levels which condition the design fields from which these objects emerge, of the series of generic forms which condition their appearance and of the typological knowledge which conditions their coherence in the overall process.
series	DDSS
last changed	2003/11/21 15:16

_id	9530
authors	Broadhurst, S.J., Cockerham, G., Taylor, N. and Pridmore, T.
year	1996
title	Automatic task modelling for sewer studies
source	Automation in Construction 5 (1) (1996) pp. 61-71
summary	Research into the development of robotic modules is discussed in the context of cost-effective, small bore, non-man entry (NME) sewer renovation. Following an introduction to the engineering problem or task and the respective task-associated sensing system, interest is centred upon suitably robust task kinematics and control, where predictive modelling is implemented employing the GRASP robotic simulation software package. The physical prototype and its accompanying environment are discussed and general conclusions drawn.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	d610
authors	Burdea, G.C.
year	1996
title	Force and Touch Feedback for Virtual Reality
source	New York: John Wiley & Sons
summary	Could weight, temperature, and texture combine to bring simulated objects to life? Describing cutting-edge technology that will influence the way we interact with computers for years to come, this pioneering book answers yes: not only is it possible, but devices capable of providing force and tactile sensory feedback already exist. Force and Touch Feedback for Virtual Reality is the first comprehensive source of information on the design, modeling, and applications of force and tactile interfaces for VR. It is a must have for scientists, engineers, psychologists, and developers involved in VR, and for anyone who would like to gain a deeper understanding of this exciting and fast-growing field. Complete with hundreds of tables, figures, and color illustrations, Force and Touch Feedback for Virtual Reality offers * Basic information on human tactile sensing and control and feedback actuator technology * A worldwide survey of force and tactile interface devices, from the simple joystick to full-body instrumented suits based on human factor tests * Step-by-step instructions for realistic physical modeling of virtual object characteristics such as weight, surface smoothness, compliance, and temperature * A unified treatment of the benefits of the new haptic interface technology for simulation and training based on human factor tests * A detailed analysis of optimum control requirements for force and tactile feedback devices * A review of emerging applications in areas ranging from surgical training and entertainment to telerobotics and the military
series	other
last changed	2003/04/23 15:14

_id	ffe2
authors	Carrar, G., Luna, F. and Rajchman, A.
year	1999
title	Cúpulas Telefónicas - Mobiliario Urbano, Diseño Industrial aplicado a una empresa de servicios (Telephone Cupolas - Urban Furniture, Industrial Design Applied to a Company of Services)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 426-409
summary	By november 1996, the state telecomunication company called for a national booth design contest. The idea was to use the awarded design shortly as part of the renovation of the public phone service. Gruppo MDM won the design contest and was contracted to do the manufacture technical drawings and a prototype which was tested during 1997. By 1997, an international bid was held, including the awarded project. Gruppo MDM was contracted for the follow up of the manufacture process, including research of suppliers worldwide, materials arriving on time with the quality required, verifying local suppliers with deadlines and quality controlls according to the specifications.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	88f9
authors	Carrara, G., Novembri, G., Zorgno, A.M., Brusasco, P.L.
year	1997
title	Virtual Studio of Design and Technology on Internet (I) - Educator's approach
doi	https://doi.org/10.52842/conf.ecaade.1997.x.n2w
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper presents a teaching experience involving students and professors from various universities, in Italy and abroad, which began in 1996 and is still on going. The Virtual Studios on the Internet (VSI) have some features in common with the Teaching Studios planned for the new programme of the faculties of Architecture in Italian universities. These are the definition of a common design theme, and the participation of disciplinary teachers. The greatest difference is in the modes of collaboration, which is achieved through information and communication technologies. The chief result of this is that the various work groups in different places can work and collaborate at the same time: the computer networks provide the means to express, communicate and share the design project.
keywords	CAAD, Teaching of architectural design, Shared virtual reality, Virtualdesign studio, Collective intelligence.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/lvi_i&ii/zorgno.html
last changed	2022/06/07 07:50

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	80f7
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2001
title	Knowledge-based System to Support Architectural Design - Intelligent objects, project net-constraints, collaborative work
doi	https://doi.org/10.52842/conf.ecaade.2001.080
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 80-85
summary	The architectural design business is marked by a progressive increase in operators all cooperating towards the realization of building structures and complex infrastructures (Jenckes, 1997). This type of design implies the simultaneous activity of specialists in different fields, often working a considerable distance apart, on increasingly distributed design studies. Collaborative Architectural Design comprises a vast field of studies that embraces also these sectors and problems. To mention but a few: communication among operators in the building and design sector; design process system logic architecture; conceptual structure of the building organism; building component representation; conflict identification and management; sharing of knowledge; and also, user interface; global evaluation of solutions adopted; IT definition of objects; inter-object communication (in the IT sense). The point of view of the research is that of the designers of the architectural artefact (Simon, 1996); its focus consists of the relations among the various design operators and among the latter and the information exchanged: the Building Objects. Its primary research goal is thus the conceptual structure of the building organism for the purpose of managing conflicts and developing possible methods of resolving them.
keywords	Keywords. Collaborative Design, Architectural And Building Knowledge, Distributed Knowledge Bases, Information Management, Multidisciplinarity
series	eCAADe
email
last changed	2022/06/07 07:55

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	sigradi2004_043
id	sigradi2004_043
authors	Celso Pereira Guimarães; Gerson G. Cunha; Luis Landau
year	2004
title	Sistema de informação e orientação para ambientes públicos em VR - O caso do hu da ufrj um projeto sinalético [Information and Orientation System for Public Environments in VR - The Case of UFRJ University Hospital, a Communication Design Project]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	Considering Levy.s (1996) thought that qualifies the cyberspace as an anbient par excellence and susceptible to be transformed and explored [1], our work intends to introduce through the simulation in VR, the use of that anbient as support of conception projetual and of the analysis and verification of the efficiency of the proposal of the System of Comunication Design implanted at the Hospital Clementino Fraga Filho of the Federal University of Rio de Janeiro (HU). [2]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2007_659
id	caadria2007_659
authors	Chen, Zi-Ru
year	2007
title	The Combination of Design Media and Design Creativity _ Conventional and Digital Media
doi	https://doi.org/10.52842/conf.caadria.2007.x.w5x
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Creativity is always interested in many fields, in particular, creativity and design creativity have many interpretations (Boden, 1991; Gero and Maher, 1992, 1993; Kim, 1990; Sternberg, 1988; Weisberg, 1986). In early conceptual design process, designers used large number of sketches and drawings (Purcell and Gero, 1998). The sketch can inspire the designer to increase the creativity of the designer’s creations(Schenk, 1991; Goldschmidt, 1994; Suwa and Tversky, 1997). The freehand sketches by conventional media have been believed to play important roles in processes of the creative design thinking(Goldschmidt, 1991; Schon and Wiggins, 1992; Goel, 1995; Suwa et al., 2000; Verstijnen et al., 1998; Elsas van and Vergeest, 1998). Recently, there are many researches on inspiration of the design creativity by digital media(Liu, 2001; Sasada, 1999). The digital media have been used to apply the creative activities and that caused the occurrenssce of unexpected discovery in early design processes(Gero and Maher, 1993; Mitchell, 1993; Schmitt, 1994; Gero, 1996, 2000; Coyne and Subrahmanian, 1993; Boden, 1998; Huang, 2001; Chen, 2001; Manolya et al. 1998; Verstijinen et al., 1998; Lynn, 2001). In addition, there are many applications by combination of conventional and digital media in the sketches conceptual process. However, previous works only discussed that the individual media were related to the design creativity. The cognitive research about the application of conceptual sketches design by integrating both conventional and digital media simultaneously is absent.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6c40
authors	Colajanni, B., Martelli, T. and Pellitteri, G.
year	1996
title	A Tool for the Analysis of the Behaviour of Building Components: The Cellular Automation
doi	https://doi.org/10.52842/conf.ecaade.1996.099
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 99-110
summary	An implementation of a cellular automation is presented that allows the simulation of the behaviour of building components under diverse environment conditions. The tool has a wide range of applications because of the generality of its structure. The object on which it operates is represented as a set of cells each of which is defined, besides its geometrical dimension and position, by a set of variables and parameters. The work it performs consists in computing transitions from a state to another, i.e. the values variables and parameters take in each cell under the action of external agents and of internal laws of interaction between self As an example of its use an application is shown analysing the thermal behaviour of the connection of a curtain wall to a concrete floor.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ddssar9606
id	ddssar9606
authors	Doughty, D.C. and Zwirner, W.G.
year	1996
title	Spa Hotels and Facilities - a Comparison of Hotels in Budapest, Buxton and Piestany
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	In Britain, health and leisure tourism seems primarily to mean leisure with health being normally merely a secondary consideration ranging from fresh air to diet. In central Europe Spas still draw tourists and patients for leisure and for treatments from their own as well as neighbouring countries. Indeed, whilst Buxton, Bath, Harrogate and Leamington draw day trippers to see their historic buildings, Carlsbad, Budapest, Piestany and many of the other grand old Spas of central Europe are filled with longer-term guests seeking an improvement to their own chronic ailments. The reasons for this decline in British Spas and the continuing relative good health of Spas in central Europe are a complex mix that includes national characteristic, financial constraints and a disbelief by the British medical establishment in the efficacy of the water cure and related Spa treatments. This reluctance to acknowledge complementary health care is certainly not the case in Germany and the old Austro-Hungarian lands and Spa tourism presents a challenge as well as a promise of lucrative international tourism to the emerging "new" states of pre-communist Europe.
series	DDSS
last changed	2003/08/07 16:36

_id	3905
authors	Duffy, T.M. and Cunningham, D.J.
year	1996
title	Constructivism: Implications for the design and delivery of instruction
source	D.H. Jonassen, (Ed) Handbook of research for educational communications and technology, N.Y; Macmillan Library reference USA
summary	This will be a seminar that examines Constructivist theory as it applies to our thinking about instruction. Many folks think of constructivism as a method of instruction -- it is not. It is a framework for thinking about learning or what it means to come to know. As such, it is a framework for understanding (interpreting) any learning environment as well as a framework for designing instruction. The seminar will be organized around weekly readings. We will examine the alternative constructivist theories, e.g., socio-cultural constructivism and cognitive constructivism, and the pragmatism of Richard Rorty. However, rather than focusing on the differences between these frameworks, our emphasis will be on the implications of the broader, common framework for the design of instruction. Hence we will spend most of the semester discussing strategies for designing and delivering instruction, e.g., the work of Bransford, Collins, Pea, Jonassen, Spiro, Fosnot, Senge, and Schank. We will consider both business and schooling environments for learning -- there is significant work in both domains. There will be particular emphasis of the use of technology in instruction. We will look at the communication, information, and context providing roles of technology as contrasted to the traditional approach of using technology to deliver instruction (to teach). We will also pay particular attention to problem based learning as one instructional model. In PBL there is particular emphasis on the role of the facilitator as a learning coach (process orientation) as opposed to a content provider. There is also a particular emphasis on supporting the development of abductive reasoning skills so that the learner develops the ability to be an effective problem solver in the content domain. The major paper/project for the course will be the design of instruction to train individuals to be learning coaches in a problem based learning or goal based scenario learning environment. That is, how do you support teachers in adapting the role of learning coach (which, of course, requires us to understand what it means to be a learning coach). Design teams will be formed with the teams all working on this same design problem. A comprehensive prototype of the learning environment is required as well as a paper provide the theoretical framework and rationale for the design strategy. While not required, I would expect that computer technology will play a significant role in the design of your learning environment. With that in mind, let me note that it is not required that the prototype be delivered on the computer, i.e., I am not requiring programming skills but rather design skills and so "storyboards" is all that is required.
series	other
last changed	2003/04/23 15:14

_id	ddssar9608
id	ddssar9608
authors	Emdanat, S.S. and Vakalo, E.-G.
year	1996
title	Shape grammars: a critical review and some thoughts
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Shape grammars are generative formalisms that produce shapes in specified styles. Little critical work has been done to examine the assumptions that shape grammar researchers make about architectural form and its generation, the methodology they employ, the underlying formalism they use, and consequently the adequacy of this formalism to describe architectural form. After establishing the criteria for evaluating the adequacy of a given generative formalism, this paper applies them to the evaluation of the shape grammar formalism. The paper demonstrates that, in its present state, shape grammar leaves a great deal to be desired in terms of its descriptive power and its generalizability. The paper concludes by exploring some of the desired characteristics for languages of architectural form.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9610
id	ddssar9610
authors	Fahmy, A.B. and Vakalo, E.-G.
year	1996
title	A conceptual framework for deriving and analyzing the geometric structures of orthogonal architectural compositions in plan
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	This paper introduces a conceptual framework for the analysis and generation of the underlying geometry of orthogonal architectural compositions in plan. The proposed framework has three interrelated objectives: (1) to allow the systematic analysis and derivation of the geometric structures of orthogonal architectural compositions in plan, (2) to describe the spatial relations among their constituent elements, and (3) to enumerate the morphological operations involved creating these relations. It comprises of a grammatical formalism and two data structures. The grammatical formalism allows the systematic derivation and analysis of the geometric structures of architectural compositions in plan. The first data structure is a table that enumerates the rules used to derive and/or analyze geometric structures and the sequence of their application. The second data structure is a binary tree that represents the spatial relations between the shapes produced during these processes.
series	DDSS
last changed	2003/08/07 16:36

_id	ecaade2024_230
id	ecaade2024_230
authors	Fekar, Hugo; Novák, Jan; Míèa, Jakub; Žigmundová, Viktória; Suleimanova, Diana; Tsikoliya, Shota; Vasko, Imrich
year	2024
title	Fabrication with Residual Wood through Scanning Optimization and Robotic Milling
doi	https://doi.org/10.52842/conf.ecaade.2024.1.025
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 25–34
summary	The project deals with the use of residual wood of tree stumps and roots through scanning, optimization and robotic milling. Wood logging residue makes up to 50 percent of the trees harvested biomass. (Hakkila and Parikka 2002). Among prevailing strategies is leaving residue on site, and recovering residue for bioenergy. (Perlack and others 2005). The project explores the third strategy, using parts of the logging residue for fabrication, which may reduce the overall amount of wood logging volume. Furthermore approach aims for applying residue in its natural form and taking advantage of specific local characteristics of wood (Desch and Dinwoodie 1996). The project applies the strategy on working with stump and roots of an oak tree. Due to considerations of scale, available milling technics and available resources, chosen goal of the approach is to create a functioning chair prototype. Among the problems of the approach is the complex shape of the residue, uneven quality of wood, varying humidity and contamination with soil. After cleaning and drying, the stump is scanned and a 3D model is created. The 3D model od a stump is confronted with a 3D modelled limits of the goal typology (height, width, length, sitting surface area and overal volume of a chair) and topological optimization algorithm is used to iteratively reach the desired geometry. Unlike in established topological optimization proces, which aims for a minimal volume, the project attempts to achieve required qualities with removing minimal amount of wood. Due to geometric complexity of both stump and goal object, milling with an 6axis industrial robotic arm and a rotary table was chosen as a fabrication method. The object was clamped to the board (then connected to a rotary table) in order to provide precise location and orientation in 3D space. The milling of the object was divided in two parts, with the seating area milled in higher detail. Overall process of working with a residual wood that has potential to be both effective and present aesthetic quality based on individual characteristics of wood. Further development can integrate a generative tool which would streamline the design and fabrication proces further.
keywords	Robotic arm milling, Scanning, Residual wood
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: