Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 15932

Reformat results as: short short into frame detailed detailed into frame

_id	eb23
authors	Akin, Omer
year	1981
title	Efficient Computer-User Interface in Electronic Mail Systems
source	Department of Computer Science, April, 1981. ii, 24 p. includes bibliography
summary	This research explores the question of improving user- computer interface. The approach is one of observing and codifying various parameters that influence the efficiency of interface in the context of electronic mail tasks. In the paper the authors observe 'expert' and 'regular' users of a mail system and analyze the sources of efficiency. It is clear that experts use a different, more specialized, set of commands in performing standard mail tasks. While experts perform these tasks with fewer errors and more 'completely,' it is not clear that they achieve this any faster than regular users. Recommendations for design are made
keywords	user interface, protocol analysis
series	CADline
email
last changed	2003/05/17 10:09

_id	ae05
authors	Akin, Omer
year	1987
title	Expertise of the Architect
source	November, 1987. [13] p. unevenly numbered : ill. includes bibliography
summary	One of the areas where the expertise of the seasoned architect comes out is in the initial structuring of design problems. During problem structuring the parameters and processes used in design are defined. Experienced architects modify these parameters both in global and local levels as a function of the success of their research process. Experienced architects also rely on 'scenarios' acquired through pervious experiences with similar problems to initialize their problem structures or to redefined them
keywords	design, architecture, methods
series	CADline
email
last changed	2003/05/17 10:09

_id	8a8a
authors	Akin, Ö., Sen, R., Donia,M. and Zhang, Y.
year	1995
title	SEED-Pro: Computer-Assisted Architectural Programming in SEED
source	Journal of Architectural Engineering -- December 1995 -- Volume 1, Issue 4, pp. 153-161
summary	Computer-assisted architectural programming is in its infancy. What there is in terms of architectural programming theory often differs from practice. In the first half of this paper we define relevant terms, provide abrief review of the state of the art, and draw attention to the primacy of architectural programming in design. SEED-Pro is introduced as an intelligent assistant providing structure to the normally open-endedactivities of design. This includes the creation of an architectural program from scratch. In the second, more technical, part of the paper we emphasize three specific topics. The design problem specificationfunctionality is described. The generation and evaluation of the emerging architectural program is discussed. An approach to the decomposition of the architectural program into alternative hierarchies is provided.The paper concludes with a discussion of what is and remains to be accomplished.
series	journal paper
email
last changed	2003/05/15 21:27

_id	ac12
id	ac12
authors	Akin, Ö.; R. Krishnamurti, K.P. Lam (eds)
year	2005
title	Generative CAD Systems
source	Singapore: Carnegie Mellon University, 2005
summary	In the new millennium, Computer Aided Design has emerged as the most potent technological innovation in design. As BIM promises to integrate design tasks vertically and horizontally through graceful data exchange, new frontiers appear to researchers and practitioners as potential watershed events of the next decade. Generative approaches, a venerable engagement of computational design, is emerging as one of these. The proceedings of the Generative CAD Symposium held at Carnegie Mellon University, both summarizes the three decades of work in this area and reveals the beginnings of research and application expected in this domain. After all, will designers be able to effortlessly and intelligently generate potential design solutions that respond to appropriate design requirements and designers’ intentions?
series	book
type	normal paper
email
more	http://www.andrew.cmu.edu/user/oa04/publications_books.html
last changed	2008/09/04 07:18

_id	2005_027
id	2005_027
authors	Akin, Ömer and Özkaya, Ipek
year	2005
title	Mixing Domains: Architecture plus Software Engineering
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 27-35
doi	https://doi.org/10.52842/conf.ecaade.2005.027
summary	Software engineering is a multidisciplinary area of knowledge combining competence in computation with at least one other area of expertise, typically in the domain of the applications being created. A course offering for students of engineering, architecture and software engineering at Carnegie Mellon illustrates the challenges and opportunities of cross-domain instruction. These include ontology, problem taxonomies, and instruction strategies.
keywords	Computing education in AEC; requirement engineering
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2020_306
id	caadria2020_306
authors	Akizuki, Yuta, Bernhard, Mathias, Kakooee, Reza, Kladeftira, Marirena and Dillenburger, Benjamin
year	2020
title	Generative Modelling with Design Constraints - Reinforcement Learning for Object Generation
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 445-454
doi	https://doi.org/10.52842/conf.caadria.2020.1.445
summary	Generative design has been explored to produce unprecedented geometries, nevertheless design constraints are, in most cases, second-graded in the computational process. In this paper, reinforcement learning is deployed in order to explore the potential of generative design satisfying design objectives. The aim is to overcome the three issues identified in the state of the art: topological inconsistency, less variations in style and unpredictability in design. The goal of this paper is to develop a machine learning framework, which works as an intellectual design interpreter capable of codifying an input geometry to form a new geometry. Experiments demonstrate that the proposed method can generate a family of tables of unique aesthetics, satisfying topological consistency under given constraints.
keywords	generative design; computational design; data-driven design; reinforcement learning; machine learning
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	af65
authors	Akleman, E., Chen, J. and Sirinivasan, V.
year	2001
title	An Interactive Shape Modeling System for Robust Design of Functional 3D Shapes
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 248-257
doi	https://doi.org/10.52842/conf.acadia.2001.248
summary	In Architecture, it is essential to design functional and topologically complicated 3D shapes (i.e. shapes with many holes, columns and handles). In this paper, we present a robust and interactive system for the design of functional and topologically complicated 3D shapes. Users of our system can easily change topology (i.e. they can create and delete holes and handles, connect and disconnect surfaces). Our system also provide smoothing operations (subdivision schemes) to create smooth surfaces. Moreover, the system provides automatic texture mapping during topology and smoothing operations. We also present new design approaches with the new modeling system. The new design approaches include blending surfaces, construction of crusts and opening holes on these crusts.
keywords	Modeling, Shape Design, Sculpting, Computer Aided Geometric Design
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2009_642
id	cf2009_642
authors	Aksamija, Ajla; Iordanova, Ivanka
year	2009
title	Multimodal representations of architectural design knowledge: Interaction between visual and ontological models
source	T. Tidafi and T. Dorta (eds) Joining Languages, Cultures and Visions: CAADFutures 2009, PUM, 2009, pp. 642- 655
summary	This paper presents multimodal representation of architectural design knowledge, where explicit and implicit information are linked. The aim is to develop computational environment that combines several modes of representation. Integration of interactive digital-models library and ontological model of architectural design factors is investigated.
keywords	Ontology, design referents, design factors, architectural design, digital model library
series	CAAD Futures
email
last changed	2009/06/08 20:53

_id	ijac20108403
id	ijac20108403
authors	Aksamija, Ajla; Ivanka Iordanova
year	2010
title	Computational Environments with Multimodal Representations of Architectural Design Knowledge
source	International Journal of Architectural Computing vol. 8 - no. 4, p. 439
summary	This article discusses interaction between multimodal representations of architectural design knowledge, particularly focusing on relating explicit and implicit types of information. The aim of the presented research is to develop a computational environment that combines several modes of representation, including and integrating different forms of architectural design knowledge. Development of an interactive digital-models library and ontological model of architectural design factors are discussed, which are complementary in nature. In a time when BIM software is seen as embodiment of domain knowledge and the future medium of architectural design, this paper presents an interaction between ontological representation of architectural design knowledge and its embodiment in interactive models, thus focusing on the process of design and design space exploration. In the digital environments that we propose, representation of different formats of knowledge, such as visual, linguistic or numeric, are integrated with relational and procedural information, design rules, and characteristics. Interactive search and query based on contextual constraints, and parametric variation of the model based on the information received from ontology are the underlying drivers for design exploration and development.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2021_177
id	ecaade2021_177
authors	Aksin, Feyza Nur and Arslan Selçuk, Semra
year	2021
title	Use of Simulation Techniques and Optimization Tools for Daylight, Energy and Thermal Performance - The case of office module(s) in different climates
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 409-418
doi	https://doi.org/10.52842/conf.ecaade.2021.2.409
summary	In recent years, performance-based design has become the key issue behind design decisions in the construction industry towards reducing energy consumption. Various simulation techniques and optimization tools have started to be used together for performance objectives to reach optimal solutions for complex design process. In the sector, one of the most energy-consuming buildings is offices. This study examines the effects of integration of simulation programs and optimization tools on the daylight, energy and thermal performances of office buildings on different climates. Two cities, Ankara and Izmir, in Turkey selected as locations. The study is carried out with total of thirteen parameters. With Rhinoceros/Grasshopper software, Honeybee, Ladybug and Octopus plug-ins used for daylight, energy and thermal simulation and performance optimization. With the results obtained, the optimal configurations related with selected parameters are determined for reducing energy consumption while improving daylight and thermal performance on different climates.
keywords	daylight, energy and thermal comfort performance; multi-objective optimization; performance-based design; office buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2018_1508
id	sigradi2018_1508
authors	Akta?, Begüm; Birgül Çolako?lu, M.
year	2018
title	Systematic approach to design builds for freeform façade: AFA Cultural Center
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 176-182
summary	The design and construction of the complex, irregularly shaped, and curvilinear building forms are also known as freeform architecture, have gained an interest form architects and engineers. This paper presents how freeform façade designs are defined with its curvilinear geometric characteristics and the systematic approach that is used to design and implement them. The proposed method incorporates product design and integral façade construction approach at AFA Cultural Center freeform façade implementation. Therefore, the paper aims to improve the viability of the proposed method and decreasing the gap between the other disciplines and architects in a systematic way without losing the creativity of the architects.
keywords	Parametric modeling; Systematic approach; Design thinking; System thinking; Freeform façade design
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2020_427
id	ecaade2020_427
authors	Akçay Kavakoglu, Ayºegül
year	2020
title	Beyond Material - Digital Tectonics of Fabric and Concrete
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 89-96
doi	https://doi.org/10.52842/conf.ecaade.2020.1.089
summary	Fabric formwork, known as the casting concrete with flexible fabric molds, frees the nature of the material, which is fluidity; hence, its tectonics. This paper examines the tectonics of concrete and fabric through computational design and analog methods. During this examination, fabrigami technique is used to foresee the intuitive act of concrete within the fabric mold concerning the computational model. Fabrigami use in fabric formwork allows the emergence of a dynamic fabric mold system revealing form variations.
keywords	fabric formwork, fabrigami, folding, dynamic mold
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddssar0214
id	ddssar0214
authors	Al Hassan, F., Trum, H.M.G.J. and Rutten, P.G.S.
year	2002
title	Strategic Briefing A Conceptual Process Model for Building Design
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Nowadays building design problems are divided in partial discipline related sub-problems. Through targeted and focused attention to sub problems however the awareness of the whole is lost. Each designparticipant gives his sub-problem first priority. In contrast in the past the master builder saw the whole problem as his problem first. Thus the process of seeing the design problem as a whole, as a result ofprioritizing, considering constraints, or strategizing, is lost in today’s practice, basically because this process is a mental and implicit process, that occurred in the brain of the multi-disciplinary master builder.In most cases it is the task of no one in a design team today. The aim of this paper is modeling this conceptual mental implicit process design using System Theory and Cognitive Psychology, trying to determine the structure of the design problem as it occurs intuitively in the brain. The result will provide us with a mechanism that enables us each time to refine a unique common design problem representation. This leads to more effective use of design team capabilities, and forms an essential basis for organizing efforts toward collaborative solutions. Also some kind of clarity is provided as to how proposed solutions are to be judged.
series	DDSS
last changed	2003/11/21 15:15

_id	ascaad2009_amal_al-ali
id	ascaad2009_amal_al-ali
authors	Al-Ali, Amal and P. Sharma
year	2009
title	Creativity and Collaboration in Architecture Education in the UAE
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 245-256
summary	A review of national government literature indicates that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes. Examples of these skills and attitudes are general problems solving, meta-cognitive skills, critical thinking and lifelong learning. Reviews of the Architecture, Engineering and Construction industry indicates a gap between architecture practice and education. The Egan report states that there is a need for a change of style, culture and process within the construction industry and it identified five driving forces, the report also recognised that the achievement of these driving forces is linked to training and education. Education must not only teach the necessary technical skills and knowledge, but also the culture of teamwork, collaborative work and creativity. The construction boom in the United Arab Emirates combined with the country’s mission to highly educate and train its nationals to be able to tackle market challenges provoked the necessity of implementing the culture of creativity and collaboration in education system. On the other hand, use of technology in education has been proven to facilitate and enhance the learning process. This paper will highlight the importance of implementing the virtual design studio as a technlogical platform in architecture education in the UAE in a way that aims to promote the culture of creativity and collaboration through the use of technology.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2009_a_al_attili
id	ascaad2009_a_al_attili
authors	Al-Attili, A. and M. Androulaki
year	2009
title	Architectural Abstraction and Representation: The embodied familiarity of digital space
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 305-321
summary	This paper argues that familiarity is the tool that enables the understanding of space abstraction and representation. Familiarity in this context is independent from embodied interaction, and is crudely based on the connection between the various similar images of space; in this particular case, virtual space. Our investigation into the nature of human interaction with space, its abstraction and its representation is based on the critical contrast between the outcomes of interaction with two virtual versions of a physical reality; the first version is a non-linear interactive graphical abstraction of the space where no assertions or indicators are given as to whether or not there is a relationship between the abstraction and its physical reality, whereas the second is a none-linear interactive 3D virtual environment clearly representing the physical space in question. The paper utilises qualitative methods of investigation in order to gain an insight into human embodied experience in space, its abstraction and representation.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	ascaad2004_paper17
id	ascaad2004_paper17
authors	Al-Attili, Aghlab A. and Richard D. Coyne
year	2004
title	Embodiment and Illusion: The Implications of Scale as a Cue for Immersion in Virtual Environments
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	This paper examines the extent to which the issue of scale impinges on our sense of immersion in virtual environments. We consider perception from the point of view of Merleau-Ponty's phenomenology, and describe a study involving extended interviews of a small number of subjects who were presented with static, moving and interactive images of spaces. We test a series of propositions about scale cues, and speculate on the wider phenomenological issues of expectation, metaphor and play.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2016_052
id	ascaad2016_052
authors	Al-Badry, Sally; Cesar Cheng, Sebastian Lundberg and Georgios Berdos
year	2016
title	Living on the Edge - Reinventing the amphibiotic habitat of the Mesopotamian Marshlands
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 513-526
summary	The Mesopotamian Marshlands form one of the first landscapes where people started to transform and manipulate the natural environment in order to sustain human habitation. For thousands of years, people have transformed natural ecosystems into agricultural fields, residential clusters and other agglomerated environments to sustain long-term settlement. In this way, the development of human society has been intricately linked to the extraction, processing and consumption of natural resources. The Mesopotamian Marshlands, located in one of the hottest and most arid areas on the planet, formed a unique wetlands ecosystem, which apart from millions of people, sustained a very high number of wildlife and endemic species. Several historical, political, social and climatic changes, which densely occurred during the past century, completely destroyed the unique civilisation of the area, made all the wild flora and fauna disappear and forced hundreds of thousands of people to migrate. During the last decade, many efforts have been made to restore the marshlands. However, these efforts are lacking a comprehensive design strategy, coherent goals and deep understanding of the complex current geopolitical situation, making the restoration process an extremely difficult task. This work aims at providing strategies for recovering the Mesopotamian Marshlands, organising productive functions in order to sustain the local population and design a new inhabitation model, using advanced computational tools while taking into account the extreme climatic conditions and several unique cultural aspects. Part of the aim of this work is to advance the use of computation and explore the opportunities that digital tools afford in helping find solutions to complex design problems where various design variables need to be coordinated to satisfy the design goals. Today, advanced computation enables designers to use population consumption demands, ecological processes and environmental inputs as design parameters to develop more robust and resilient regional planning strategies. This work has the double aim of first, presenting a framework for re-inhabiting the Marshlands of Mesopotamia. Second, the work suggests a design methodology based on computer-aided design for developing and organising productive functions and patterns of human occupation in wetland environments.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	2005_331
id	2005_331
authors	Al-Douri, Firas A., Clayton, Mark J. and Abrams, Robin F.
year	2005
title	The Impact of 3D Digital Modeling on the 3D Design Aspects in Urban Design Plans
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 331-340
doi	https://doi.org/10.52842/conf.ecaade.2005.331
summary	Some experts suggest that urban design plans in US cities may lack adequate coverage of the three-dimensional design aspects of the built environment. 3D digital models may help designers visualize and interact with design alternatives, large urban data sets, and 3D information more effectively, thus correcting this problem. Case studies of recent urban design plans that have used 3D digital models may indicate whether these technologies can increase the quality of the plan. This research discusses the role 3D urban models can play in supporting designers in addressing the 3D design aspects. A literature review focused on reviewing secondary sources to construct or adopt theoretical propositions against which the empirical data can be compared and contrasted. A case study involved investigating the methods with which 3D models have been used in developing a selected urban design plan. The content analysis of the case study refuted the premise that the plan would inadequately address 3D aspects and utilize 3D information, and indicated an effective usage of 3D modeling to analyze and represent most of the 3D and 2D information elements and issues. The results are consistent with a hypothesis that the effective usage of 3D modeling would result in the effective coverage of 3D information and issues. The effective usage of the model’s functionalities has improved the quality of the decision-making process through improving designers’ cognitive capabilities and providing a platform for communicating design ideas among and across design teams.
keywords	3D Modeling; Urban Design Plans; Digital Models; 3D Design Aspects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2023_70
id	caadria2023_70
authors	Al-Douri, Firas, Yan, Wei and Jahic, Edin
year	2023
title	Campusim: An Integrated Parametric BIM for Campus Design Simulation and Optimization
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 471–480
doi	https://doi.org/10.52842/conf.caadria.2023.2.471
summary	Although simulation models have been recently employed to model and examine pedestrian behavior in urban areas, comparable research has not been pursued in campus environments despite their importance as a critical area of inquiry. Those models' paucity and methodological limitations suggest investigating new research and design strategies to objectively assess and describe how the qualities of campus spaces and zones influence human behavior and, hence, predict the patterns of users' interaction and space usage. Those patterns and their impact on health have been pointed out as critical to the relationship among public space and quality of life due to Covid-19. There is an urgent need to develop decision support tools that would support interactive design processes and enhance the quality of open space design in terms of sense of space, place-making, and user interaction. To that goal, this study has proposed the integrated parametric BIM-based campus life simulation "CampuSIM" as a method for parametrization of the qualities of pedestrian campus zones and spaces. The study proposed the use of multi-objective optimization methods to fulfill various campus quantifiable and non-quantifiable design objectives. The significance of the proposed tool will result from its potential application in a wide range of complex, dynamic pedestrian behavior scenarios such as flows, social simulations, and design.
keywords	Campus Modelling, Campus Master Planning, Campus Design, Parametric Modelling, BIM, Design Optimization
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	ecaade2018_172
id	ecaade2018_172
authors	Al-Douri, Firas
year	2018
title	The Employment of Digital Simulation in the Planning Departments in US Cities - How does it affect design and decision-making processes?
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 539-548
doi	https://doi.org/10.52842/conf.ecaade.2018.2.539
summary	The increased interactivity of digital simulation tools has offered a wide range of opportunities that may provoke a paradigmatic shift in urban design practice. Yet, research results did not provide any clear evidence that such shift seems to exist. Further studies are required to examine the methods and impact of their usage on decision-making and design outcome. To that goal, this research uses the single-case study design that has been pursued in three phases: literature review, online survey, and semi-structured interviews. The results have shown inadequacies, inconsistency, and ineffectiveness of usage of the tools that are most appropriate to the design activities of each phase and thus a limited impact on critical areas of the decision-making. The impact of the tools' usage is found to be correlated with not only the extent of their usage, but also with a variety of procedural and substantive factors such as the plan methodology, extent of tool's usage, choice of the appropriate tool, and planners' skills and capabilities in using those tools.
keywords	Urban Simulation ; Urban Design Practice
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: