Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3424

Reformat results as: short short into frame detailed detailed into frame

_id	ffe2
authors	Carrar, G., Luna, F. and Rajchman, A.
year	1999
title	Cúpulas Telefónicas - Mobiliario Urbano, Diseño Industrial aplicado a una empresa de servicios (Telephone Cupolas - Urban Furniture, Industrial Design Applied to a Company of Services)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 426-409
summary	By november 1996, the state telecomunication company called for a national booth design contest. The idea was to use the awarded design shortly as part of the renovation of the public phone service. Gruppo MDM won the design contest and was contracted to do the manufacture technical drawings and a prototype which was tested during 1997. By 1997, an international bid was held, including the awarded project. Gruppo MDM was contracted for the follow up of the manufacture process, including research of suppliers worldwide, materials arriving on time with the quality required, verifying local suppliers with deadlines and quality controlls according to the specifications.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	aa2f
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	1997
title	An Intelligent Assistant for the Architectural Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1997.x.a3a
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	It seems by now fairly accepted by many researchers in the field of the Computer Aided Design that the way to realise support tools for the architectural design is by means of the realisation of Intelligent Assistants. This kind of computer program, based on the Knowledge Engineering and machine learning, finds his power and effectiveness by the Knowledge Base on which it is based. Moreover, it appears evident that the modalities of dialogue among architects and operators in the field of building industry, are inadequate to support the exchange of information that the use of these tools requires. In fact, many efforts at international level are in progress to define tools in order to make easier the multiple exchange of information in different fields of building design. Concerning this point, protocol and ontology of structured information interchanges constitute the first steps in this sense, e.g. those under standardisation by ISO (STEP), PDT models and Esprit project ToCEE. To model these problems it has brought forth a new research field: the collaborative design one, an evolution of distributed work and concurrent design. The CAAD Laboratory of Dipartimento di Architettura and Urbanistica per l'Ingegneria has carried out a software prototype, KAAD, based on Knowledge Engineering in the fields of hospital building and of building for aged people. This software is composed by an Interface, a Knowledge Base, a Database and Constraints. The Knowledge Base has been codified by using the formal structure of frames, and has been implemented by the Lisp language. All the elements of KB are objects
keywords	Design Studio
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/carrara/carrara.htm
last changed	2022/06/07 07:50

_id	88f9
authors	Carrara, G., Novembri, G., Zorgno, A.M., Brusasco, P.L.
year	1997
title	Virtual Studio of Design and Technology on Internet (I) - Educator's approach
doi	https://doi.org/10.52842/conf.ecaade.1997.x.n2w
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper presents a teaching experience involving students and professors from various universities, in Italy and abroad, which began in 1996 and is still on going. The Virtual Studios on the Internet (VSI) have some features in common with the Teaching Studios planned for the new programme of the faculties of Architecture in Italian universities. These are the definition of a common design theme, and the participation of disciplinary teachers. The greatest difference is in the modes of collaboration, which is achieved through information and communication technologies. The chief result of this is that the various work groups in different places can work and collaborate at the same time: the computer networks provide the means to express, communicate and share the design project.
keywords	CAAD, Teaching of architectural design, Shared virtual reality, Virtualdesign studio, Collective intelligence.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/lvi_i&ii/zorgno.html
last changed	2022/06/07 07:50

_id	508b
authors	Chiu, Mao-Lin
year	1997
title	Representations and Communication channels in collaborative architectural design
source	Mary L. M., John S. G., Fay S., editor, Formal Aspects of Collaborative CAD, IFIP97, Australia, Februrary, 1997, pp. 77-96
summary	Collaborative design requires participation of individuals and coordination of design information and tasks. This paper focuses on the representations and communication channels in collaboration design. On the basis of a design communication model and findings of four collaborative design case studies, the phenomena of design communication are presented. The study also examines when the conditions of collaboration are achieved and what kinds of interfaces in computer-mediated collaborative work are needed, and propose a theme-oriented interface for computer-mediated collaborative design.
series	other
email
last changed	2003/04/23 15:14

_id	ga9921
id	ga9921
authors	Coates, P.S. and Hazarika, L.
year	1999
title	The use of genetic programming for applications in the field of spatial composition
source	International Conference on Generative Art
summary	Architectural design teaching using computers has been a preoccupation of CECA since 1991. All design tutors provide their students with a set of models and ways to form, and we have explored a set of approaches including cellular automata, genetic programming ,agent based modelling and shape grammars as additional tools with which to explore architectural ( and architectonic) ideas.This paper discusses the use of genetic programming (G.P.) for applications in the field of spatial composition. CECA has been developing the use of Genetic Programming for some time ( see references ) and has covered the evolution of L-Systems production rules( coates 1997, 1999b), and the evolution of generative grammars of form (Coates 1998 1999a). The G.P. was used to generate three-dimensional spatial forms from a set of geometrical structures .The approach uses genetic programming with a Genetic Library (G.Lib) .G.P. provides a way to genetically breed a computer program to solve a problem.G. Lib. enables genetic programming to define potentially useful subroutines dynamically during a run .* Exploring a shape grammar consisting of simple solid primitives and transformations. * Applying a simple fitness function to the solid breeding G.P.* Exploring a shape grammar of composite surface objects. * Developing grammarsfor existing buildings, and creating hybrids. * Exploring the shape grammar of abuilding within a G.P.We will report on new work using a range of different morphologies ( boolean operations, surface operations and grammars of style ) and describe the use of objective functions ( natural selection) and the "eyeball test" ( artificial selection) as ways of controlling and exploring the design spaces thus defined.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	d4b1
authors	Egglib, L., Ching-yaob, H., Brüderlinb, B. and Elbera, G.
year	1997
title	Inferring 3D models from freehand sketches and constraints
source	Computer-Aided Design, Vol. 29 (2) (1997) pp. 101-112
summary	This paper describes `Quick-sketch', a 2D and 3D modelling tool for pen-based computers. Users of this system define a model by simple pen strokes, drawn directlyon the screen of a pen-based PC. Exact shapes and geometric relationships are interpreted from the sketch. The system can also be used to sketch 3D solid objects andB-spline surfaces. These objects may be refined by defining 2D and 3D geometric constraints. A novel graph-based constraint solver is used to establish the geometricrelationships, or to maintain them when manipulating the objects interactively. The approach presented here is a first step towards a conceptual design system.Quick-sketch can be used as a hand sketching front-end to more sophisticated modelling, rendering or animation systems.
keywords	Geometric Constraints, Conceptual Design, Free-Hand Sketch Interpretation
series	journal paper
last changed	2003/05/15 21:33

_id	faf7
authors	Greer, R., Haas, C., Gibson, G., Traver, A. and Tucker, R.L.
year	1997
title	Advances in control systems for construction manipulators
source	Automation in Construction 6 (3) (1997) pp. 193-203
summary	Fundamental advances in sensors, actuators, and control systems technology are creating opportunities to improve the performance of traditional construction equipment. New capabilities are being developed as well. These improvements in performance and new capabilities are resulting in better safety and efficiency. However, selecting control strategies can be confusing, and measuring and predicting their performance can be difficult. This paper identifies emerging control paradigms and describes methods for measuring their performance. Many control schemes and corresponding example applications are identified, including single degree of freedom control sticks, multiple degree of freedom joysticks, operating and safety constraints, teach/learn capability, resolved motion with internal and external sensors, spatially correspondent controllers, tele-operation, graphical programming and control, and autonomous controls. Methods described for measuring performance are based on American National Standard Institute (ANSI) standard tests, applications analysis, and ergonomics. Examples focus on the University of Texas at Austin's large scale hydraulic manipulator (LSM) and Automated Road Maintenance Machine (ARMM) with the results of performance tests on these manipulators being presented.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	1767
authors	Loveday, D.L., Virk, G.S., Cheung, J.Y.M. and Azzi, D.
year	1997
title	Intelligence in buildings: the potential of advanced modelling
source	Automation in Construction 6 (5-6) (1997) pp. 447-461
summary	Intelligence in buildings usually implies facilities management via building automation systems (BAS). However, present-day commercial BAS adopt a rudimentary approach to data handling, control and fault detection, and there is much scope for improvement. This paper describes a model-based technique for raising the level of sophistication at which BAS currently operate. Using stochastic multivariable identification, models are derived which describe the behaviour of air temperature and relative humidity in a full-scale office zone equipped with a dedicated heating, ventilating and air-conditioning (HVAC) plant. The models are of good quality, giving prediction accuracies of ± 0.25°C in 19.2°C and of ± 0.6% rh in 53% rh when forecasting up to 15 minutes ahead. For forecasts up to 3 days ahead, accuracies are ± 0.65°C and ± 1.25% rh, respectively.The utility of the models for facilities management is investigated. The "temperature model" was employed within a predictive on/off control strategy for the office zone, and was shown to substantially improve temperature regulation and to reduce energy consumption in comparison with conventional on/off control. Comparison of prediction accuracies for two different situations, that is, the office with and without furniture plus carpet, showed that some level of furnishing is essential during the commissioning phase if model-based control of relative humidity is contemplated. The prospects are assessed for wide-scale replication of the model-based technique, and it is shown that deterministic simulation has potential to be used as a means of initialising a model structure and hence of selecting the sensors for a BAS for any building at the design stage. It is concluded that advanced model-based methods offer significant promise for improving BAS performance, and that proving trials in full-scale everyday situations are now needed prior to commercial development and installation.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	9748
authors	Trikac, S.N., Banerjeea, P. and Kashyapb, R.L.
year	1997
title	Virtual reality interfaces for feature-based computer-aided design systems
source	Computer-Aided Design, Vol. 29 (8) (1997) pp. 565-574
summary	A computer-aided design (CAD) system with a virtual reality (VR) interface simplifies the design of complex mechanical parts. To add a design feature (e.g., a hole,slot, or protrusion), the designer can navigate in the part to the appropriate face of the part where he/she wishes to attach the feature, and sketch directly on that face.Besides convenience, this method of feature specification implicitly enforces feature accessibility constraints, and also provides hints to the process-planner regardingthe order in which the features may be manufactured. We detail the design of a VR-based prototype CAD system. The system maintains the knowledge of part cavitiesand their adjacencies, and a triangulated boundary-representation of an approximating polyhedron. We present incremental provably correct algorithms for updatingthis representation as the user edits the part. We also show how this representation supports real-time displays, navigation, and collision detection. The user-interfaceof the CAD system relies on these capabilities to provide the above-mentioned advantages.
keywords	User Interfaces, Virtual Reality, Feature-Based Design, Geometric Reasoning, Feature Extraction
series	journal paper
last changed	2003/05/15 21:33

_id	75a8
authors	Achten, Henri H.
year	1997
title	Generic representations : an approach for modelling procedural and declarative knowledge of building types in architectural design
source	Eindhoven University of Technology
summary	The building type is a knowledge structure that is recognised as an important element in the architectural design process. For an architect, the type provides information about norms, layout, appearance, etc. of the kind of building that is being designed. Questions that seem unresolved about (computational) approaches to building types are the relationship between the many kinds of instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called ‘prototypes’) face problems clarifying these questions. The research work at hand proposes to investigate the role of knowledge associated with building types in the design process.Knowledge of the building type must be represented during the design process. Therefore, it is necessary to find a representation which supports design decisions, supports the changes and transformations of the design during the design process, encompasses knowledge of the design task, and which relates to the way architects design. It is proposed in the research work that graphic representations can be used as a medium to encode knowledge of the building type. This is possible if they consistently encode the things they represent; if their knowledge content can be derived, and if they are versatile enough to support a design process of a building belonging to a type.A graphic representation consists of graphic entities such as vertices, lines, planes, shapes, symbols, etc. Establishing a graphic representation implies making design decisions with respect to these entities. Therefore it is necessary to identify the elements of the graphic representation that play a role in decision making. An approach based on the concept of ‘graphic units’ is developed. A graphic unit is a particular set of graphic entities that has some constant meaning. Examples are: zone, circulation scheme, axial system, and contour. Each graphic unit implies a particular kind of design decision (e.g. functional areas, system of circulation, spatial organisation, and layout of the building). By differentiating between appearance and meaning, it is possible to define the graphic unit relatively shape-independent.If a number of graphic representations have the same graphic units, they deal with the same kind of design decisions. Graphic representations that have such a specifically defined knowledge content are called ‘generic representations.’ An analysis of over 220 graphic representations in the literature on architecture results in 24 graphic units and 50 generic representations. For each generic representation the design decisions are identified. These decisions are informed by the nature of the design task at hand. If the design task is a building belonging to a building type, then knowledge of the building type is required. In a single generic representation knowledge of norms, rules, and principles associated with the building type are used. Therefore, a single generic representation encodes declarative knowledge of the building type. A sequence of generic representations encodes a series of design decisions which are informed by the design task. If the design task is a building type, then procedural knowledge of the building type is used.By means of the graphic unit and generic representation, it is possible to identify a number of relations that determine sequences of generic representations. These relations are: additional graphic units, themes of generic representations, and successive graphic units. Additional graphic units defines subsequent generic representations by adding a new graphic unit. Themes of generic representations defines groups of generic representations that deal with the same kind of design decisions. Successive graphic units defines preconditions for subsequent or previous generic representations. On the basis of themes it is possible to define six general sequences of generic representations. On the basis of additional and successive graphic units it is possible to define sequences of generic representations in themes. On the basis of these sequences, one particular sequence of 23 generic representations is defined.The particular sequence of generic representations structures the decision process of a building type. In order to test this assertion, the particular sequence is applied to the office building type. For each generic representation, it is possible to establish a graphic representation that follows the definition of the graphic units and to apply the required statements from the office building knowledge base. The application results in a sequence of graphic representations that particularises an office building design.Implementation of seven generic representations in a computer aided design system demonstrates the use of generic representations for design support. The set is large enough to provide additional weight to the conclusion that generic representations map declarative and procedural knowledge of the building type.
series	thesis:PhD
email
more	http://alexandria.tue.nl/extra2/9703788.pdf
last changed	2003/11/21 15:15

_id	58f4
authors	Barequet, G. and Kumar, S.
year	1997
title	Repairing CAD models
source	Proceedings of IEEE Visualizationí97, pp. 363-370
summary	We describe an algorithm for repairing polyhedral CAD models that have errors in their B-REP. Errors like cracks, degeneracies, duplication, holes and overlaps are usually introduced in solid models due to imprecise arithmetic, model transformations, designer's fault, programming bugs, etc. Such errors often hamper further processing like finite element analysis, radiosity computation and rapid prototyping. Our fault-repair algorithm converts an unordered collection of polygons to a shared-vertex representation to help eliminate errors. This is done by choosing, for each polygon edge, the most appropriate edge to unify it with. The two edges are then geometrically merged into one, by moving vertices. At the end of this process, each polygon edge is either coincident with another or is a boundary edge for a polygonal hole or a dangling wall and may be appropriately repaired. Finally, in order to allow user- inspection of the automatic corrections, we produce a visualization of the repair and let the user mark the corrections that conflict with the original design intent. A second iteration of the correction algorithm then produces a repair that is commensurate with the intent. Thus, by involving the users in a feedback loop, we are able to refine the correction to their satisfaction.
series	other
email
last changed	2003/04/23 15:14

_id	34b8
authors	Batie, D.L.
year	1997
title	The incorporation of construction history in architectural history: the HISTCON interactive computer program
source	Automation in Construction 6 (4) (1997) pp. 275-285
summary	Current teaching methods for architectural history seldom embrace building technology as an essential component of study. Accepting the premise that architectural history is a fundamental component to the overall architectural learning environment, it is argued that the study of construction history will further enhance student knowledge. This hypothesis created an opportunity to investigate how the study of construction history could be incorporated to strengthen present teaching methods. Strategies for teaching architectural history were analyzed with the determination that an incorporation of educational instructional design applications using object-oriented programming and hypermedia provided the optimal solution. This evaluation led to the development of the HISTCON interactive, multimedia educational computer program. Used initially to teach 19th Century iron and steel construction history, the composition of the program provides the mechanism to test the significance of construction history in the study of architectural history. Future development of the program will provide a method to illustrate construction history throughout the history of architecture. The study of architectural history, using a construction oriented methodology, is shown to be positively correlated to increased understanding of architectural components relevant to architectural history and building construction.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	823f
authors	Bignon, J.C., Halin, G. and Humbert, P.
year	1997
title	Hypermedia Structuring of the Technical Documentation for the Architectural Aided Design
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 843-848
summary	The definition of an universal structuring model of the technical documentation is arduous, indeed utopian considering the great number of products and the diversity of relative information. To answer this situation we are trying to develop a general approach of the documentation. The document is the base entity of documentation structuring and it represents a coherent informative unit. We propose a model of document hypermedia structuring. This model allows the definition, the presentation, the navigation and the retrieval of general information on building products by a document manipulation. It is associated with a hypermedia design method adapted to document management. This method proposes, after the identification of the user, three phases of hypermedia definition : data definition, navigation definition and user interface definition. The model of a hypermedia structuring of the technical documentation proposed in this article is at once independent of available information on products, open, and makes easier the addition of new navigational functions.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	ccc0
authors	Braithwaite, G., Radford, A., Huang, E. , Chang, T.W., Jones, D., Woodbury, R. and Sweeting, R.
year	1997
title	The Computer Modeling of Development Proposals: A Routine Part of Development Control
doi	https://doi.org/10.52842/conf.caadria.1997.123
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 123-132
summary	This paper describes and discusses the aims and practicalities involved in the computer modeling of contentious development applications becoming accepted as a routine part of the processes of development control. It uses three case studies drawn from the University of Adelaide’s work with the City of Adelaide in Australia to delineate the role of 3D computer models of proposed new buildings and their immediate surroundings in the public understanding of the streetscape, neighbourhood context, overshadowing and overlooking implications of the proposals.
keywords	3D City Modeling
series	CAADRIA
last changed	2022/06/07 07:54

_id	0024
authors	Breen, J. and Dijk, T. van
year	1997
title	Modelling for eye level composition; design media experiments in an educational setting.
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	In order to simulate the visual effects of designs at eye level, it is necessary to construct models from which (sequences of) images can be taken. This holds true for both Optical Endoscopy and Computer Aided Visualisation techniques. In what ways can an eye level approach stimulate spatial awareness and create insights into the workings of a design concept? Can Endoscopic methods be used effectively as a creative environment for design decision-making and teamwork and even to stimulate the generation of new design ideas? How should modelmaking be considered if it is to be of use in an ‘impatient’ design process, and how can students be made aware of the opportunities of both direct eye level observations from design models and of the more sophisticated endoscopic imaging techniques? This paper explores the theme of eye level modelling by focusing on a number of formal exercises and educational experiments carried out by the Delft Media group in recent years. An attempt is made to describe and evaluate these experiences, in order to draw conclusions and to signal possible new opportunities for eye level composition for the benefit of both design education and practice...
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	a4ae
authors	Breen, J.L.H. and Stellingwerff, M.C.
year	1997
title	IMAGING IMAGINATION WORKSHOP
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	The workshop Imaging Imagination attempted to bring experts from different institutes together within the framework of a creative exercise, which might stimulate comparison of different results and lead to an exchange of ideas. Results: 7 endoscope presentations and 7 computer presentations, result of the Questionnaire, a Discussion and Conclusions. Presented in the conference proceedings and on website: http://www.bk.tudelft.nl/media/eaea/imim/index.html
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
type	normal paper
email
more	http://www.bk.tudelft.nl/media/eaea/imim/index.html
last changed	2005/09/09 10:43

_id	cabb
authors	Broughton, T., Tan, A. and Coates, P.S.
year	1997
title	The Use of Genetic Programming In Exploring 3D Design Worlds - A Report of Two Projects by Msc Students at CECA UEL
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 885-915
summary	Genetic algorithms are used to evolve rule systems for a generative process, in one case a shape grammar,which uses the "Dawkins Biomorph" paradigm of user driven choices to perform artificial selection, in the other a CA/Lindenmeyer system using the Hausdorff dimension of the resultant configuration to drive natural selection. (1) Using Genetic Programming in an interactive 3D shape grammar. A report of a generative system combining genetic programming (GP) and 3D shape grammars. The reasoning that backs up the basis for this work depends on the interpretation of design as search In this system, a 3D form is a computer program made up of functions (transformations) & terminals (building blocks). Each program evaluates into a structure. Hence, in this instance a program is synonymous with form. Building blocks of form are platonic solids (box, cylinder, etc.). A Variety of combinations of the simple affine transformations of translation, scaling, rotation together with Boolean operations of union, subtraction and intersection performed on the building blocks generate different configurations of 3D forms. Using to the methodology of genetic programming, an initial population of such programs are randomly generated,subjected to a test for fitness (the eyeball test). Individual programs that have passed the test are selected to be parents for reproducing the next generation of programs via the process of recombination. (2) Using a GA to evolve rule sets to achieve a goal configuration. The aim of these experiments was to build a framework in which a structure's form could be defined by a set of instructions encoded into its genetic make-up. This was achieved by combining a generative rule system commonly used to model biological growth with a genetic algorithm simulating the evolutionary process of selection to evolve an adaptive rule system capable of replicating any preselected 3D shape. The generative modelling technique used is a string rewriting Lindenmayer system the genes of the emergent structures are the production rules of the L-system, and the spatial representation of the structures uses the geometry of iso-spatial dense-packed spheres
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	63ea
authors	Brown, A.G.P., Berridge, P. and Mackie, D.
year	1997
title	Gaming as a Vehicle for Collaborative Designcollaborative design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.c5x
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper outlines one approach to addressing the problem of participation in a properly understood process and goes on to show how the principles used are being reinforced by an interactive computer based application.
keywords	Collaborative Design
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/berridge/berridge.htm
last changed	2022/06/07 07:50

_id	629a
authors	Brunetta, Vincent
year	1997
title	EXPLORER A Procedural Modeler Based on Architectural Knowledge
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 125-133
summary	Cet article est consacré à la modélisation procédurale de configurations architecturales. Les outils de CAO actuels reproduisent et figent la pratique traditionelle du projet architectural, leurs modèles de représentation sous-jacents sont considérablement éloignés de la représentation usuelle de l'objet architectural. Il nous apparaît que les modes d'accès et de constitution "alternatifs" du modèle informatique (description textuelle et modélisation procédurale) représentent un champ d'expérimentation privilégié susceptible de questionner ces problèmes de représentation du savoir architectural. Nous commencerons par l'examen de modélisations par description textuelle (notamment de façades néoclassiques et de l'architecture palladienne) pour ensuite nous intéresser à une série de modélisations procédurales à base de connaissances architecturales. Nous verrons enfin comment cette réflexion, dans un cadre pédagogique, confronte nos étudiants à la fois à l'analyse architecturale, à une approche de la programmation structurée ou orientée-objet ainsi qu'à une utilisation "critique" des outils de conception assistée.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	35a1
authors	Caneparo, L.
year	1997
title	Shared Information System for Urban and Architectural Design
source	Coyne, R. Ramscar, M. Lee, J. and Zreik, K. (eds.) Design and the net. Proceedings of the Sixth International EuropIA Conference, Europia Productions, Paris, pp. 39-52
summary	This paper briefly describes the implementation of an Internet-intranet information system applied to a large-scale project. The large-scale project is centered on the urban area around the Porta Susa railway station in Turin, Italy. The information system integrates the communicative tools used to facilitate and improve the collaboration between the different actors working on the project and the distributed environment used to elaborate the information across a wide area network. The main factors considered are those which exploit the potentialities of computers and networks for interaction and communication. One result is the possibility of interacting dynamically with the information, re-elaborating and distributing it in progress. The information systems opens different ways of collaboration between the project employees, and extends the participation in the project to the citizens.
series	other
email
last changed	2003/04/23 15:14

For more results click below: