Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3217

Reformat results as: short short into frame detailed detailed into frame

_id	e292
authors	Charitos, D. and Bridges, A.H.
year	1997
title	On Architectural Design of Virtual Environments
source	Design Studies, Vol.18, No. 2, 143-154
summary	This paper considers the domains of architectural design and film theory for the purpose of informing the design of virtual environments (VEs). It is suggested that these domains may form a background for the consideration of possible metaphors for the design of VEs. Firstly, the paper investigates the relation between architecture and virtual reality technology, through the nature of drawings and virtual environments as means of representing three-dimensional spaces. Then, differences between VEs and physical environments (PEs) are identified for the purpose of understanding the intrinsic nature of VEs, by comparing them to our familiar everyday spatial experience. This step is considered essential in helping us understand how we might be able to develop an architectural conception of designing spaces, in the context of VEs. The paper then presents two directions towards informing VE design by means of theoretical and practical architectural design knowledge. Finally, the use of film-related studies is considered as a means of enhancing our conception of time and movement in VEs.
series	journal paper
email
last changed	2003/04/23 15:50

_id	123c
authors	Coomans, M.K.D. and Timmermans, H.J.P.
year	1997
title	Towards a Taxonomy of Virtual Reality User Interfaces
source	Proceedings of the International Conference on Information Visualisation (IV97), pp. 17-29
summary	Virtual reality based user interfaces (VRUIs) are expected to bring about a revolution in computing. VR can potentially communicate large amounts of data in an easily understandable format. VR looks very promising, but it is still a very new interface technology for which very little application oriented knowledge is available. As a basis for such a future VRUI design theory, a taxonomy of VRUIs is required. A general model of human computer communication is formulated. This model constitutes a frame for the integration of partial taxonomies of human computer interaction that are found in the literature. The whole model constitutes a general user interface taxonomy. The field of VRUIs is described and delimited with respect to this taxonomy.
series	other
last changed	2003/04/23 15:50

_id	ce97
authors	Faconti, D., Giacchin V. and Pellitteri, G.
year	1997
title	On-line Handbook to Support Brickwork Design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.v9i
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	Computer assistants to building design are more and more oriented to construct repertories of cases to be recalled as possible suggestions to a real design situation. For this purpose it is necessary that the cases be described by the parameters most apt to describe the design situations. In this way it will be possible to extract out of the repertory the existing case most akin to the design problem the designer is dealing with. This kind of help is the most fit to the usual behaviour of a designer which, in order to find the best solution to a design problem, resort to his culture, his knowledge of real cases, which he tries to adapt to the peculiar need of his present case. This paper presents an attempt to construct such a tool also if restricted to only one building component: the exterior brickwork. It is structured as an Hypertext, which allows a net of relationships much richer than the one of a conventional handbook.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/faconti/faconti.htm
last changed	2022/06/07 07:50

_id	07d8
authors	Garza, J.M. de la and Howitt, I.
year	1998
title	Wireless communication and computing at the construction jobsite
source	Automation in Construction 7 (4) (1998) pp. 327-347
summary	For many years, the walkie-talkie has been synonymous with the construction industry. During jobsite project execution, there are three variables which can either hinder or facilitate successful results, namely, quality, quantity, and timing of information. Wireless data communications technology is capable of delivering just-in-time information within the `last mile' between the trailer and a desired location on the jobsite. This paper reports on a study which surveyed information needs at the jobsite, emerging wireless data communications technology, and assessed the extent to which wireless data technology can fulfill the information needs of the jobsite [J.M. de la Garza, I. Howitt, Wireless communication and computing at the jobsite, Research Report 136-11, Construction Industry Institute, Austin, TX, 1997]. We have organized jobsite information needs into the following ten categories: (a) requests for information, (b) materials management, (c) equipment management, (d) cost management, (e) schedule and means and methods, (f) jobsite record keeping, (g) submittals, (h) safety, (i) QC/QA, and (k) future trends. Each category was analyzed in terms of its appropriateness to take advantage of wireless technology. The four formats considered to transmit information wirelessly were: (a) live voice, (b) live video, (c) batched data, and (d) live data. Current wireless communication technology has been classified into the following five classes: (a) circuit-switched wireless data systems, (b) packet-switched wireless data systems––this class was further subdivided into specialized mobile radio systems and cellular digital packet data systems, (c) wireless local area networks, (d) paging systems, and (e) satellite-based data communications. A primer for wireless communications covering both fundamental and advanced communications concepts has also been included to enable a better understanding of the issues involved in making trade-offs while configuring a wireless jobsite communication system. The example presented in this paper shows how a contractor can define a subset of information needs by choosing from those already articulated herein and determine if a given wireless technology should even be considered as a viable way of meeting the information needs that such company has.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c0da
authors	Gero, J.S., Kazakov, V. and Schnier, T.
year	1997
title	Genetic engineering and design problems
source	D. Dasgupta and Z. Michalewicz (Eds.), Evolutionary Algorithms in Engineering Applications, Springer Verlag, Berlin, pp.47-68
summary	This chapter reviews developments in genetic algorithms based on genetic engineering extensions. It presents the development a computational model of genetic engineering and demonstrates its applicability and utility.
keywords	Genetic Engineering, Learning
series	other
email
last changed	2003/04/06 07:18

_id	4777
authors	Jokela, M., Keinânen, A., Lahtela, H. and Lassila K.
year	1997
title	Integrated building simulation tool RIUSKA
source	Building Simulation, Prague, Czech Republic
summary	A new integrated simulation system for the building services design and facilities management purposes is being developed by Insinööritoimisto Olof Granlund Oy. The system covers the thermal simulation needs of the whole building life cycle from the preliminary design to renovations. The main components of the simulation system are a simulation database, user interfaces, a result module, a building geometry modeller and a calculation engine. The building geometry modeller generates a 3-D surface model of the building. The calculation engine of the first version is DOE 2.1E. The simulation database is linked to other design databases and design programs so that redundant input data is avoided.
series	other
last changed	2003/04/23 15:50

_id	51c2
authors	Melling, G., Bradley, D.A., McKee, H. and Widden, M.B.
year	1997
title	The development of a rapid-prototyping technique for mechatronic-augmented heavy plant
source	Automation in Construction 5 (5) (1997) pp. 365-378
summary	Telechiric, semi-autonomous and autonomous heavy plant is finding an increasing role in applications such as construction, sub-sea work and decommissioning. There is a need for improved operator interfaces for such plant, and hence for rapid-prototyping tools which link the development of the operator interface with control and operational strategies and with machine geometries.The paper sets out a strategy by which different operator interfaces can be readily evaluated while at the same time generating the requisite information structure for the control of real items of plant. The proposed system is based on the use of interconnected PCs, one to simulate the operator interface and another to provide a kinematic representation of the machine using an appropriate "desk-top reality" environment. This system offers a safe, practical, rapid and cost-effective means of assessing proposed operator interfaces, as well as facilitating the development of machine kinematic structures and the associated operational and control strategies.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	f998
authors	Mynatt, E.D., Adler, A., Ito, M. and O‘Day, V.L.
year	1997
title	Design for network communities
source	Proceedings of CHI, ACM Press, New York, pp. 210-217
summary	Collaboration has long been of considerable interest in the CHI community. This paper proposes and explores the concept of network communities as a crucial part of this discussion. Network communities are a form of technology-mediated environment that foster a sense of community among users. We consider several familiar systems and describe the shared characteristics these systems have developed to deal with critical concerns of collaboration. Based on our own experience as designers and users of a variety of network communities, we extend this initial design space along three dimensions: the articulation of a persistent sense of location, the boundary tensions between real and virtual worlds, and the emergence and evolution of community.
series	other
email
last changed	2003/04/23 15:50

_id	8f16
authors	Pizarro, D.V., Price, D.L. and Beliveau, Y.J.
year	1997
title	Auditory collision warning signals for crane operation
source	Automation in Construction 5 (6) (1997) pp. 445-457
summary	This study examined the effect that an auditory collision warning signal's pulse rate, pulse pattern, and onset distance had on subject braking responses in a simulated crane/overhead power line collision scenario. The experimental warning signal alerted subjects of their proximity to overhead power lines. The experimental taks required subjects to monitor a simulated auditory collision warning signal while simultaneously operating a single-axis driving simulation task. The driving task simulated an actual crane operator's mental workload required to navigate a crane and manipulate various loads. Subjects were required to initiate braking responses based on the information conveyed solely through the auditory collision warning system. No visual information was provided to the subjects to isolate the effects of the warning signal. Subjective ratings of the auditory warning signals were obtained to compare subjects' actual performance using the warning signal versus their subjective preferences. Results indicate that subjects were able to initiate appropriate braking responses while using an auditory collision warning signal with moderate onset distances and low pulse rates. The auditory pulse pattern did not have a large impact on subjects' braking responses except at extremely short onset distances. Overall, it was concluded that a pulsing auditory warning signal comprised of a moderate onset distance and low pulse rate could work effectively as a proximity warning device for mobile cranes.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	469d
authors	Sariyildiz, S., Völker, H. and Schwenck, M.
year	1997
title	Improving CAAD by Applying Integrated Design Support Systems and New Design Methodologies
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 151-162
summary	This paper deals with the improvement of the current design practice by means of ICT (Information and Communication Technology) tools in the field of architectural design. In the first part we make suggestions which can contribute significantly to improvements in the mentioned field. This includes: - the development of Integrated Design Support Systems (IDSS) - the application of new design methodologies in relation to IDSS. In the second part we will discuss the topic more generally. Which other aspects have to be considered regarding the development of support software for architectural design? Which improvements can be reached by introducing advanced information and ,communication technology? Which changes are necessary in the promising relationship between architecture and computer science?
keywords	Computer Aided Architectural Design, Support Systems, Integrated Design, Environments, Design Methodology, Architecture and Computer Science
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	9e13
authors	Seward, D.W., Scott, J.N., Dixon, R., Findlay, J.D. and Kinniburgh, H.
year	1997
title	The automation of piling rig positioning using satellite GPS
source	Automation in Construction 6 (3) (1997) pp. 229-240
summary	The paper is divided in two parts. Part one describes the Stent Automatic Pile Positioning and Recording system (SAPPAR) which was launched in November 1994. The system utilises a Trimble satellite global positioning system (GPS) to assist rig drivers in accurately positioning the rig over a pile position without the need for setting out. Advantages of the system include: cost savings by removing the need for site survey staff; faster set-up times over pile positions; increased accuracy - the system can reliably position the rig to within ± 25 mm; removal of problems resulting from damage to setting out pins; constant monitoring of pile position; and Links to CAD for data input and as-built drawings. Part two describes a further development of the system in collaboration with Lancaster University and Casagrande, the Italian rig manufacturer. The aim of the research is to fully automate the final positioning process. This represents one of the first uses of GPS for real-time automation. The system hardware components include: ultra-compact PC104 processor cards for a compact and robust embedded system; minimum sensing on the rig to minimise cost and maximise robustness; and limit sensors to facilitate on-board safety. The control algorithms were developed on a fifth-scale model in the laboratory using an innovative and new approach to the design of model based control systems. The importance of careful consideration of safety issues is stressed and conclusions are drawn based on the early findings from preliminary field trials.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	34f2
authors	Van der Voordt, T., Vrielink, D. and Van Wegen, H.
year	1997
title	Comparative floorplan-analysis in programming and architectural design
source	Design Studies 18 (1) (1997) pp. 67-88
summary	Every floorplan may be regarded as a reflection of the goals and activities of the users as interpreted by the architect. By comparing a wide range of building layouts for similar organizations one may achieve a good understanding of the ways in which goals and values can be expressed in spatial solutions. It offers the opportunity to develop a spatiofunctional typology of design solutions. Postoccupancy evaluations focusing on underlying arguments and user experiences with different design solutions give insight into relevant points of decision, (dis)advantages for use and perception, and (dis)congruencies between spatial systems and social systems. This article demonstrates how an integration of comparative floorplan-analysis and postoccupancy evaluation may contribute to more soundly based solutions in programming and architectural design. The relationship between spatial and social configurations is illuminated by an analysis of the floorplans of two schools with different educational systems and the spatial implications of a shift from a medical care concept into a residential care concept in nursing homes.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss2006-hb-467
id	DDSS2006-HB-467
authors	A. Fatah gen. Schieck, A. Penn, V. Kostakos, E. O'Neill, T. Kindberg, D. Stanton Fraser, and T. Jones
year	2006
title	Design Tools for Pervasive Computing in Urban Environments
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 467-486
summary	In this paper we report on ongoing research in which the implications of urban scale pervasive computing (always and everywhere present) are investigated for urban life and urban design in the heritage environment of the city of Bath. We explore a theoretical framework for understanding and designing pervasive systems as an integral part of the urban landscape. We develop a framework based on Hillier's Space Syntax theories and Kostakos' PSP framework which encompasses the analysis of space and spatial patterns, alongside the consideration of personal, social and public interaction spaces to capture the complex relationship between pervasive systems, urban space in general and the impact of the deployment of pervasive systems on people's relationships to heritage and to each other. We describe these methodological issues in detail before giving examples from early studies of the types of result we are beginning to find.
keywords	Urban space, Pervasive systems, Urban computing, Space Syntax, Interaction space
series	DDSS
last changed	2006/08/29 12:55

_id	b73a
authors	Angelo,C.V., Bins Ely, V.H.M., Bueno,A.P., Ludvig C. and Trezub, D.
year	1999
title	Space Syntax and the New Transportation System in the Santa Catarina Island
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 434-437
summary	The paper reports an on-going research that aims at describing and analysing some of the syntactic characteristics of the urban space of Santa Catarina Island, in an attempt to evaluate its performance, more specifically its social and spatial integration and segregation. The research has been conducted with the aid of the Aximagic software, still in exam stage and not yet released to the public, a tool being developed by a group of researches of the Rio Grande do Sul Federal University and given up by Prof. Doctor Benamy Turkienicz. The software is part of a larger georeferenced program called CityZoom wich includes others tools to the comprehention of the urban morphology. This program works with graphic pictures in the inlet of data and also in the acquisition of results. The syntactic study of the Santa Catarina Island as a whole aims to obtain the comprehension of its global structure, relating it to the integrated public transportation system proposed to Florianópolis. These studies should allow an understanding of the impact the developments will have upon the urban morphology, and the new public transportation system.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2003_070
id	sigradi2003_070
authors	Angulo, Antonieta H. and Vásquez de Velasco, Guillermo P.
year	2003
title	El Uso de Scaners y Ploteadores Tridimensionales en Talleres de Diseño Iniciales (The Use of Three-dimensional Scanners and Plotters in Early Design Studios)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	The paper makes reference to the introduction of a new pedagogical strategy in the teaching of fundamental design in early design studios. The authors recognizes a relationship between the creative process and the media that supports the design process, and proposes the use of 3-dimensional scanners and plotters (rapid prototyping) for interfacing between the use of digital and analogue media. The paper suggests that in such learning environment the students will learn to design without the limitations that analogue or digital media will individually impose in the creative process. The paper ends with an outline for a relevant design exercise.
keywords	Conceptual design, 3-d scanners, 3-d plotters
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	b335
authors	Bayle, E., Bellamy, R., Casaday, G., Erickson, T., Fincher, S., Grinter, B., Gross, B., Lehder, D., Marmolin, H., Moore, B., Potts, C., Skousen, G. and Thomas, T.
year	1998
title	Putting It All Together: Towards a Pattern Language for Interaction Design Reports
source	ACM SIGCHI Bulletin 1998 v.30 n.1 pp.17-23
summary	Pattern languages are representations that have been used in architecture and urban design for about twenty years. They focus on the interaction between physical form and social behavior, and express design solutions in an understandable and generalizable form. But pattern languages are not simply set of patterns intended to be universally applied; instead, they are actually meta-languages which, when used in a particular situations, generate situated design languages. This report describes a CHI 97 workshop which explored the utility of pattern languages for interaction design. We discuss the workshop's rationale, the structure and process of the workshop, and some of the workshop's results. In particular, we describe some patterns developed as part of the workshop, and our consequent reflections on the use of patterns and pattern languages as lingua franca for interaction design. This report concludes with a bibliography on pattern languages and related matters that spans architecture, software design, and organizational design.
series	other
last changed	2002/07/07 16:01

_id	acadia20_708
id	acadia20_708
authors	Charbel, Hadin; López Lobato, Déborah
year	2020
title	Between Signal and Noise
doi	https://doi.org/10.52842/conf.acadia.2020.1.708
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 708-718.
summary	Climate change continues to have noticeable and accelerated impacts on various territories. Previously predictable and recognizable patterns used by humans and nonhumans alike are perpetually being altered, turning localized signals into noise and effectively disrupting indigenous modes of life. While the use of certain technologies such as data collection, machine learning, and automation can render these otherwise patternless information streams into intelligible content, they are generally associated as being “territorializing,” as an increase in resolution generally lends itself to control, exploitation, and colonization. Contrarily, indigenous groups with long-lasting relationships that have evolved over time have distinct ways of reading and engaging with their contexts, developing sustainable practices that, while effective, are often overlooked as being compatible with contemporary tools. This paper examines how the use of traditionally territorializing technologies can be paired with indigenous knowledge and protocols in order to operate between signal and noise, rendering perverse changes in the landscape comprehensible while also presenting their applications as a facet for sociopolitical, cultural, and ecological adaptation. A methodology defined as “decoding” and “recoding” presents four distinct case studies in the Arctic, addressing various scales and targets with the aim of disrupting current trends in order to grant and/or retain autonomy through what can be read as a form of preservation via augmented adaptation.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	8b29
id	8b29
authors	Chaszar, A. (ed.), Burry, M., Eliassen, T., Garofalo, D., Glymph, J., Hesselgren, L., Jonkhans, N., Kienzl, N., Kloft, H., Maher, A., Mueller, V., Palmer, A., Reuss, S., Schuler, M., Schwitter, C., Sharples, C., Sharples, W., Shea, K., Stoller, P., Takemori, T., Woodger, N.
year	2006
title	Blurring the Lines: Computer-Aided-Design and -Manufacturing in Architecture
source	Wiley-Academy, London 224 pp. Architecture in Practice series
summary	The first few years of the 21st century have seen a revolution in the ways that we think about designing and making buildings. In no other area is this more apparent than in the interface of computer-aided design (CAD) and computer-aided manufacture (CAM). The potential blurring or assimilation of these two systems holds the still elusive but golden promise of a direct, smooth transference of design data into large-scale production facilities in which components are directly cut, modelled and moulded. How far off are we from seeing the widespread adoption of this technology? What is the potential for CAD/CAM beyond tailor-made forms? In the future, what is the possibility of complex, large-scale forms being run out in mass-customised buildings?
keywords	associative geometry, auralization, CNC, collaborative design, generative design, parametric design, simulation, visualization
series	book
type	normal paper
email
last changed	2006/06/12 23:35

_id	eaea2003_27-firsov
id	eaea2003_27-firsov
authors	Firsov, A.I.
year	2004
title	Using Video and Computer Technologies for the Appreciation of the Integral Beauty of Architectural Objects
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 135-137
summary	The paper is devoted to finding the aesthetic value of architectural objects and it is the continuation of works /1/ and /2/ executed before. In those the following concepts had been developed: a) dot estimation of beauty of an architectural object; b) function of beauty, c) integrated estimation of beauty of an architectural object. // The integrated estimation of beauty doesn t depend upon the choice of a point of observation and can serve as an objective measure of beauty of an architectural object.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

_id	eaea2003_23-kubinsky-kardos
id	eaea2003_23-kubinsky-kardos
authors	Kubinsky, B. and Kardos, P.
year	2004
title	Completion of the Public Area of the Bratislava Main Station using Fine Art Components
source	Spatial Simulation and Evaluation - New Tools in Architectural and Urban Design [Proceedings of the 6th European Architectural Endoscopy Association Conference / ISBN 80-227-2088-7], pp. 113-115
summary	The project deals with supplementation of fine art components to the newly designed square in front of the main railway station and their integration into the public space to provide a good system functioning in the contemporary ground-floor level. Several students of Faculty of Architecture, Slovak University of Technology in Bratislava, have elaborated this idea under the leadership of B. Kubinsky with the technical support of P. Kardos during the years 2001 and 2002. The supplementation had been planned in two parts: first each student has designed his own object of art and created the model of his piece. Then, in the second part, the quality and relevance of each object was verified by the spatial endoscope in the laboratory of P. Kardos.
series	EAEA
more	http://info.tuwien.ac.at/eaea
last changed	2005/09/09 10:43

For more results click below: