Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 16941

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2020_178
id	caadria2020_178
authors	Luo, Yue, Liang, Manchen, Gao, Letong, Zhang, Yuchun, Wang, Chenxi, Su, Xia and Huang, Weixin
year	2020
title	Investigating Site Survey Process with Protocol Analysis and an Extended FBS Framework
doi	https://doi.org/10.52842/conf.caadria.2020.2.547
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 547-556
summary	In this paper, we try to investigate architectural site survey process by conducting experiment and quantitative analysis. 17 student volunteers were asked to practice site survey for a fixed design objective. With site survey process recorded along with sketching and utterance, we adopt protocol analysis and FBS ontology, which are widely used and discussed in design process research, as the basis of our analysis. Since site survey is a preliminary stage of architectural design, it differs from actual design process in many aspects. In this case, we extended the original FBS framework by adding two extra activities- Objective Processor and Subjective Processor- to better describe site survey process.
keywords	Site Survey; Protocol Analysis; FBS Ontology; Architecture Education
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	dc5a
authors	Luque, Manuel J.
year	1999
title	Working with a CAAD's Spreadsheet
doi	https://doi.org/10.52842/conf.ecaade.1999.217
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 217-222
summary	This paper shows the content of a subject imparted at the ETSAB (UPC). It describes the use of CAD systems in tasks that could not even be thought before new technology arrival and traditional methods had to be used. CAD systems potential to simultaneously work with constitutive objects and relations between them is taken into advantage. The definite design is not only the juxtaposition of some but the tight relation linking them. This work proposes CAD systems to be used in architectural design projects as spreadsheets to perform arithmetic calculations. The process to obtain an architectural model has ended in a logic sequence of formal operations, which uses completely defined objects as data. Any element of the project, data or operation, can be changed and model updating is automatically performed obtaining the new result. Finally a concrete exercise developed along the course is shown like a practical example.
keywords	Teaching, CAD, Architectural Design, Planning
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2017_305
id	ecaade2017_305
authors	Luther, Mark B.
year	2017
title	The Application of Daylighting Software for Case-study Design in Buildings
doi	https://doi.org/10.52842/conf.ecaade.2017.1.629
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 629-638
summary	The application of different software, whether simple or complex, can each play a significant role in the design and decision-making on daylighting for a building. This paper, discusses the task to be accomplished, in real case studies, and how various lighting software programs are used to achieve the desired information. The message iterated throughout the paper is one that respects, and even suggests, the use of even the simplest software, that can guide and inform design decisions in daylighting. Daylighting can be complex since the position of the sun varies throughout the day and year as well as do the sky conditions for a particular location. Just because we now have the computing capacity to model every single minute of a day throughout a year, doesn't justify its task. Several projects; an architecture studio, a university office building, a school library and a gymnasium all present different tasks to be achieved. The daylighting problems, the objects and the software application and their outcomes are presented in this paper. Over a decade of projects has led to reflecting upon the importance of computing in daylighting, its staged approach and the result that it can achieve if properly applied.
keywords	Daylighting Design; Daylighting Analysis; Radiosity; Ray-tracing
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2015_206
id	ecaade2015_206
authors	Luyten, Laurens
year	2015
title	CAAD and Conceptual Design Collaboration between Architects and Structural Engineers
doi	https://doi.org/10.52842/conf.ecaade.2015.2.215
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 215-224
summary	Architectural design benefits from a design collaboration between architect and engineers that starts early in the design process. This paper presents a proposal for a new structural language developed to support an early design collaboration between architect and structural engineer. This language expresses the essential characteristics of the conceptual design of the structural engineer, and requires a limited amount of structural engineering knowledge for the architect to comprehend. The language is evaluated in different case studies with architecture and interior architecture students: they show the students' appreciation as it is found easy to learn and use, and a helpful tool in conceptual design collaboration with a structural engineer. Although the language is developed for manual 3D sketching, the paper briefly indicates its potentials for digital 3D representations and more intelligent CAAD like Multi-Agent System (MAS).
wos	WOS:000372316000026
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=3d3e3cd0-6fe9-11e5-a486-00190f04dc4c
last changed	2022/06/07 07:51

_id	acadia13_397
id	acadia13_397
authors	Luzar, Brigitte
year	2013
title	Sheltering the Permeable Body
doi	https://doi.org/10.52842/conf.acadia.2013.397
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 397-398
summary	The house provides an urban refuge from electro pollution produced by mechanical equipment, wiring, electrical power distribution lines (extremely low frequency) and wireless communication networks (microwaves).
keywords	Next Generation Technology, Complex Systems, Social Forms, Theory and Culture
series	ACADIA
type	Design Poster
email
last changed	2022/06/07 07:51

_id	ecaaderis2023_55
id	ecaaderis2023_55
authors	Lykouras, Ioannis, Prilenska, Viktorija, Kuusemets, Jaan, Linask, Esther and Sooväli-Sepping, Helen
year	2023
title	Reflections on Practice at RIS 2023
source	De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 197–200
summary	The practice panel of the RIS 2023 aimed to illuminate how the knowledge generated by a community such as eCAADe is applied in the realms of architecture, planning, and policy in the Estonian context. Touching upon different aspects of practice, the presentations highlighted three main directions towards regenerative design: facilitating participatory processes, augmenting creativity by incorporating performance simulations into the early design stages and harnessing digital technologies to manage complex problems. Besides its value as a case study of the Estonian context, the practice panel can serve as an inspiration for a more complex – and messy – understanding of performance.
keywords	Practice, Regenerative Design, Performance, Participatory Processes, Digital Twin, Wicked Problems, Transdisciplinarity.
series	eCAADe
email
last changed	2024/02/05 14:28

_id	ecaade2008_009
id	ecaade2008_009
authors	Lyon , Eduardo R.
year	2008
title	Knowledge Based Design and Digital Manufacturing:
doi	https://doi.org/10.52842/conf.ecaade.2008.625
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 625-632
summary	This research explores new ways to integrate manufacturing knowledge in to design phases. Through the use of design for manufacturing (DfM) concept, and looking at relations between its potential application in component design and its implementation using digital manufacturing technologies, the author implemented a DfM model that varies from previous models by incorporated learning in the process. This process was based on the incremental development and refinement of design heuristics and metrics. The DfM model developed in this research is a process model to be implemented as a framework within educational settings. The final purpose is to provide better foundational constructs for design education and to improve teaching approaches that integrate design and manufacturing.
keywords	Design Computing, Design for manufacturing, Knowledge Based Design, Digital Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2009_795
id	sigradi2009_795
authors	Lyon, Arturo; Claudio Labarca
year	2009
title	Modular Flow; Hard on parametrics
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The design and fabrication of an exhibition display project was taken as an opportunity to explore parametric design with a group of students in Chile. This article presents the experience of a design studio workshop exercise by addressing the introduction of parametric design principles and the development of a built academic project through a team based design and fabrication process. The strategy followed by the team was to utilize parametric models as a mean to materialize driving variables of the project into unexpected geometries to be deployed in different public spaces in Santiago. Context, time scale and available technology resulted in a non-obvious combination of advanced digital design and fabrication techniques and low-cost mass-produced materials.
keywords	parametric; design; experimental; architecture; Chile
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2006_k003
id	sigradi2006_k003
authors	Lyon, Eduardo
year	2006
title	Design Process Taxonomy: Notes on Design Theories, Methods and Instruments
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 30-37
summary	This presentation argues that the concepts of “tools” and “material”, in relation to it use in contemporary architectural design education, can be understood as “instruments” within design processes. The difference between them relies on, its design knowledge abstraction levels, and its mechanisms to capture, manipulate and produce design knowledge. In addition, an initial exploration of Distributed Cognition concept, in order to redefine the use of instruments in design process as Cognitive Instruments, is presented. Furthermore, a more comprehensive framework for design knowledge is presented, including a specific examination of design instruments an its role indesign processes. In the conclusions possible effects derived from the use of “instruments” in design processes are explored.
series	SIGRADI
type	keynote paper
last changed	2016/03/10 09:55

_id	2005_245
id	2005_245
authors	Lyon, Eduardo
year	2005
title	Design for Manufacturing in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2005.245
source	Digital Design: The Quest for New Paradigms [23nd eCAADe Conference Proceedings / ISBN 0-9541183-3-2] Lisbon (Portugal) 21-24 September 2005, pp. 245-252
summary	This paper explores new ways to integrate manufacturing processes information in to design phases. Through the analysis of related fields and looking at the relations between its design methods and production processes, we analyze design processes and design representations that already have embedded in them specific ways to materialize through production the artifacts they define. Subsequently, we explore curved surface fabrication using cutting and bending technologies. As a summary, we conceptualize from this top-down development approach to design a framework that integrates design and construction in architecture, based on three possible applications fields: - Design processes improvement - Building production process improvement - CAD-CAM Tools development.
keywords	Design Computing, Design Cognition, Digital Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ijac20053304
id	ijac20053304
authors	Lyon, Eduardo
year	2005
title	Autopoiesis and Digital Design Theory: CAD Systems as Cognitive Instruments
source	International Journal of Architectural Computing vol. 3 - no. 3, 317-334
summary	In contrast to traditional models of design process fundamentally defined by the abstract manipulation of objects, this study recognizes that the resources available for rethinking architecture are to be found in a reformulation of its theory and practice. This reformation should be based on non-linear design processes in which dynamic emergence and invention take the place of a linear design process fixed on a particular object evolution. Advances in computation thinking and technology have stimulated the design and formulation of a large number of design software. Its elaboration supposes a new conceptualization of our discipline's knowledge, in a body of principles and regulations, which commands the artifact's design and its realization; therefore, it constitutes a preliminary datum for its comprehension, and thereby is of theoretical importance. Despite the continuous increment of power in computers and software capacities, the creative space of freedom defined by them acting as cognitive instruments remains almost unexplored. Therefore, we propose a change from a design knowledge based on objects to one focused on design as a network of processes. In addition, this study explores the concept of Distributed Cognition in order to redefine the use of digital tools in design process as Cognitive Instruments.
series	journal
more	http://www.ingentaconnect.com/search/expand?pub=infobike://mscp/ijac/2005/00000003/00000003/art00005
last changed	2007/03/04 07:08

_id	2006_342
id	2006_342
authors	Lyon, Eduardo
year	2006
title	Component Based Design and Digital Manufacturing - A DfM Model for Curved Surfaces Fabrication using Three Axis CNC Router
doi	https://doi.org/10.52842/conf.ecaade.2006.342
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 342-350
summary	Through the use of design for manufacturing (DfM) method and looking at the relations between its potential application in architectural production and its implementation using digital manufacturing technologies, we analyze building construction processes and explore, in more detail curved surface fabrication using two dimensional cutting and three dimensional milling processes. Afterwards a DfM model for curved surfaces fabrication using three-axis computer numerical control (CNC) router is proposed. The proposed DfM model relies fundamentally in two supporting factors; the implementation of design heuristics that integrates production knowledge and the availability of some design related to production evaluation metrics. Subsequently, we test and refine the model using structured design experiences. This was accomplished by capturing new design heuristics and detecting useful evaluation metrics for production. In the final part of the research, a refined DfM model was tested in a component design case study. The case study is based on producing a curved surface module on wood for an existing proprietary component based wall system. As a summary, we conceptualize from this top-down development approach to create a design for manufacturing model that integrates design and construction in architecture, based on three possible applications fields: Design processes improvement, building production process improvement, CAD-CAM tools development. Our purpose is to provide better foundational constructs and approaches for integrating design with manufacturing in architecture.
keywords	Design for Manufacturing; Design Cognition; Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2009_078
id	ecaade2009_078
authors	Lyon, Eduardo
year	2009
title	Digital Fabrication and Component Optimization Using DFM: Integrating Two-dimensional Cutting and Three-dimensional Milling in Wood Panel Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2009.565
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 565-572
summary	This research explores new ways to integrate manufacturing knowledge in to design phases. Through the use of design for manufacturing (DfM) concept, and looking at relations between its potential application in component design and its implementation using digital manufacturing technologies, the author implemented a DfM model that varies from previous models by incorporated learning in the process. This process was based on; a knowledge systematization process; and the incremental development and refinement of design heuristics and metrics. Subsequently the attempt on this research is twofold. One is to realize a process to capture and organize manufacturing knowledge, and second to organize that knowledge and make it available as a DfM model for component design using specific CNC technology.
wos	WOS:000334282200068
keywords	Design Computing, design for manufacturing, knowledge based design, digital manufacturing
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2005_120
id	sigradi2005_120
authors	Lyon, Eduardo; Charles Eastman
year	2005
title	Design for manufacturing in architecture: mapping between the design and fabrication of curved surfaces
source	SIGraDi 2005 - [Proceedings of the 9th Iberoamerican Congress of Digital Graphics] Lima - Peru 21-24 november 2005, vol. 1, pp. 120-125
summary	This paper explores new ways to integrate manufacturing processes information in to design phases. Through the analysis of related fields and looking at the relations between its design methods and production processes, we analyze design processes and design representations that already have embedded in them specific ways to materialize through production the artifacts they define. Subsequently, we explore curved surface fabrication using cutting and bending technologies. As a summary, we conceptualize from this top-down development approach to design a framework that integrates design and construction in architecture, based on three possible applications fields: 1.) Design processes improvement; 2.) Building production process improvement; 3.) CAD-CAM Tools development. [Full paper in Spanish]
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2010_129
id	sigradi2010_129
authors	Lyon, Gottlieb Arturo; García Alvarado Rodrigo
year	2010
title	Variaciones intensivas: diseño paramétrico de edificios en altura basado en análisis topológico [Intensive variations: parametric design of tall buildings based on topological analysis]
source	SIGraDi 2010_Proceedings of the 14th Congress of the Iberoamerican Society of Digital Graphics, pp. Bogotá, Colombia, November 17-19, 2010, pp. 129-132
summary	Several building works have demonstrated the possibilities of architectural design based on structural performance. This work discusses some examples and digital design strategies that approach this issue, as well as an exercise for a tower generated through topological optimization. That experience presents alternatives for a traditional office tower in Santiago, Chile, the Torre Santa Maria, based on generative design strategies for the incorporation of structural and environmental requirements to define parametric models. The experience and the capabilities studied reveal an intensive variation of architectural shape. This approach challenges conventional building regularity and suggests new ways of designing based on material performance.
keywords	parametric design, topological analysis, tall buildings, environmental performance, structural performance
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ac20
authors	Lyons, Arthur and Doidge, Charles
year	1993
title	Understanding Structural Movement Joints with CAAD Animation
doi	https://doi.org/10.52842/conf.ecaade.1993.x.p3d
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The well-established use, as an architectural design tool, of computer graphics using 'fly-through' techniques gives a highly visual overview of design concepts and may additionally illustrate certain specific details, but it cannot show their time-dependent dynamic function. This paper describes and illustrates how CAAD animation can be used to analyse not only structural philosophy but also the dynamic effects of nonstatic loading and thermal movement, thus leading to a better understanding of the design criteria applied in certain elegant solutions. The CAAD video animations illustrate the structural philosophy relating to the facade of the refurbished Bracken House, London and the dynamic operation of key movement junctions within Stansted Airport and East Croydon Railway Station.
keywords	Structure, Movement Joints, Animation, Video
series	eCAADe
last changed	2022/06/07 07:50

_id	cf2013_256
id	cf2013_256
authors	Lyu, Junchao; Bauke de Vries, and Chengyu Sun
year	2013
title	Towards a Computational Spatial Knowledge Acquisition Model in Architectural Space
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 256-266.
summary	Existing research which is related to spatial knowledge acquisition often shows a limited scope because of the complexity in the cognition process. Research in spatial representation such as space syntax presumes that vision drives movement. This assumption is only true under certain conditions and makes these models valid only in specific scenarios. Research in human spatial cognition field suggests that the spatial information perceived by the individual is not equal to the visual appearance of the space, a straightforward way to represent this cognition process quantitatively is lacking. Research in wayfinding usually assumes a certain degree of familiarity of the environment for the individual, which ignores the fact that the individual sequentially perceives information during wayfinding and the familiarity of the environment changes during the wayfinding process. In this paper, a conceptual spatial knowledge acquisition model for architectural space is presented based on the continuous spatial cognition framework. Three types of local architectural cues are concluded to relate common architectural elements to the continuous spatial cognition framework. With all relations in the proposed conceptual model quantitatively described, a computational model can be developed to avoid the aforementioned limitations in spatial representation models, human spatial cognition models and wayfinding models. In this way, our computational model can assist architects evaluate whether their designed space can be well perceived and understood by the users. It can help enhance the way-finding efficiency and boost the operational efficiency of many public buildings.
keywords	local architectural cues, spatial knowledge, human cognition framework
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ascaad2023_069
id	ascaad2023_069
authors	lºbilir, Sümeyye
year	2023
title	A Method Proposal for 3D Digital Modelling of Historical Ottoman Fountains
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 90-108.
summary	Historical buildings are in critical position in terms of heritage value with their role in examination and preservation of urban culture and identity. Historical buildings are affected by changes in physical and social environment. Consequently, they face risks such as deformation and destruction. Considering that documentation of historical buildings provides contributions to research, conservation and restoration studies. Fountains, public elements of Ottoman civil architecture, hold significant positions in cultural and architectural heritage. Creation of 3D digital models of Ottoman fountains will also make significant contributions to studies. This study aims to search for method for 3D digital modelling of Ottoman fountains through example of III. Ahmed Fountain. Ottoman fountains contain common characteristics and typological elements coming from construction period, location and architectural style. This study presents modelling method combines multiple techniques for 3D digital modelling of fountains, due to inadequacy of single modelling method in conveying details, and applicability of chosen method to digital modelling process of fountains with different characteristics. In this study, research was carried out on different modelling methods to create most detailed and accurate model. Fountain elements are classified into three subgroups as main mass, details and regular elements to apply most appropriate modelling methods. Main mass was shaped on Rhinoceros using geometry-based modelling method, while ornaments in regular elements group were created in Grasshopper with parametric modelling. Detail elements were created in Agisoft Metashape with photogrammetric modelling to convey in detail. This study presents gradual method proposal with multiple techniques but also tries to include suggestions for problems encountered in modelling process of historical buildings. In this context, texture and geometry deformations in scanning models were corrected with ZBrush, and color differences caused by effect of light and shadow were tried to be solved by creating new texture maps on Adobe Substance 3D Sampler.
series	ASCAAD
email
last changed	2024/02/13 14:40

_id	sigradi2022_296
id	sigradi2022_296
authors	Lãcãtusu, Alexandra Adelina; Cruz, Marcos; Parker, Brenda; Salmane, Anete Krista
year	2022
title	Biocentric Design: Mapping Optimal Environmental Variables for Moss Propagation on Urban Bioreceptive Surfaces
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 1251–1262
summary	The biocolonisation of urban building surfaces by mosses is a ubiquitous and naturally occurring phenomenon that encapsulates immense ecological value for both current and future challenges of life in cities. The miniature ecosystems facilitated by mosses capture atmospheric pollutants and maintain local biodiversity by providing shelter and nutrients for a highly diverse set of organisms across all kingdoms of life. Early establishment and growth of bryophyte communities appear to be influenced by a dynamic mix of biotic and abiotic factors, while environmental cues modulate physiological responses and biochemical exchanges. A prototype monitoring device was designed to measure carbon dioxide uptake under variable light, humidity, and temperature conditions during a 3-week experiment. By providing a non-destructive tool for understanding and visualising the impact of environmental variables on photosynthetic behaviour, the device contributes to a biocentric design practice, where an organism’s ecological needs begin to drive the development of bioreceptive micro-environments.
keywords	Living things, Bioreceptive design, Moss ecophysiology, Photosynthetic behaviour, Environmental monitoring
series	SIGraDi
email
last changed	2023/05/16 16:57

_id	028c
authors	Léglise, Michel
year	1998
title	Ordinateurs dans l'apprentissage de la conception : mental et instrumental
doi	https://doi.org/10.52842/conf.ecaade.1998.138
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 138-145
summary	Il n'est pas inéluctable d'utiliser, dans les écoles d'architecture et pour l'apprentissage de la conception, les outils logiciels qu'exploitent les architectes en phase de production. On exposera en quoi ces systèmes lourds et efficaces dans la fabrication des pièces écrites et graphiques en fin de projet, se révèlent inadaptés en phase d'apprentissage et de pré-conception. L'alternative ici proposée consiste à considérer un étudiant comme un acteur qui décide, dans un environnement multiple et changeant de modules logiciels, d'appeler tel ou tel élément propre à stimuler son imagination ou aider sa réflexion, dans la phase où il se trouve, dans le mode de représentation qu'il choisit. Cet environnement est considéré comme un dispositif. Quelques exemples existants de ces modules logiciels sont brièvement présentés, comme incitation à continuer d'explorer cette voie. La conclusion expose la difficulté de l'entreprise, mais insiste sur les enjeux qui y sont attachés.
series	eCAADe
email
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/05leglise/index.htm
last changed	2022/06/07 07:59

For more results click below: