Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2786

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9808
id	ddss9808
authors	Boelen, A.J.
year	1998
title	Pattern Matching for Decision Support
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In this paper is discussed how we can use pattern matching techniques in combination with object orientation to support decision makers in arranging offices and industrial and commercial facilities in existing urban areas. The method used is based on the findings of a Ph.D. project almost finishedwhen writing this. The tool under development is specifically useful for rehabilitation of deteriorated industrial or commercial areas.I consider such an area already occupied and surrounded with all kinds of urban objects and connected to all kinds of infrastructure. I can describe this area in available objects and facilities. Furthermore we can describe the areas capacity left within the infrastructure, the capacity in forexample work force or clients and the available band width in noise or pollution. By describing the area in terms of availability of capacity to absorb or produce flows of people, goods, energy and information we sketch the room available for certain types of industrial or commercial facilities. I developed a technique to describe industrial and commercial facilities in such a way that we enable the match between these and the characteristics of an area available. Pattern matching techniquesenable the system to generate best matches between available areas, locations and facilities. This model can be adapted in several object oriented geographical information systems and be integrated with other information systems that for example calculate the pollution of certain kinds of facilities. The rules to match with are partly based on objective, measurable data like available capacity on the electricity network and needed electrical power for certain facilities. Other matching rules are based on political norms on for example acceptable pollution levels and suggested pollution of facilities. The paper presents the problem area of industrial area rehabilitation, describes the architecture of the modeling technique and presents the first findings of implementation studies.
keywords	Pattern matching, Object GIS, Urban object modeling, Facility planning
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9807
id	ddss9807
authors	Boelen, A.J. and Lugt, Hermen J. van der
year	1998
title	Communication of design parameters within groups
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper discusses the facilitation of worldwide concurrent design within the domains involved in environmental planning, urban design and civil engineering. Typical projects in these domains require the collaboration of many experts. Each of these has his reference framework for the taskat hand and for the variables used. The amount of variables makes it impossible for each project participant to take account for all possible impacts of proposed or planned actions. The typical project demands for a concurrent design process that enables all participants to concentrate ontheir domain of expertise. On the other hand the design process should enable them to have insight in the problems, within the domains of other experts. The system should provide a generic environment with the ability to attach domain specific knowledge. By providing this support thesystem integrates knowledge specific to various expert domains.In the PortPlan project within the LWI organization a system is being developed that supports the integration of various reference frameworks involved in environmental planning. We no longer need to develop a common language for the users. The system contains a dynamic set of scalebound reference objects for the domains involved. The system facilitates the communication of object characteristics. It also supports the presentation of these objects, in legends for each participant involved.We achieve the communication between participants using a dynamic legend. We also enable all participants to become informed on the interests of other participants. We achieve the technical communication using the exchange of interventions. We do not exchange results. This leads to alow "network traffic load" and thus enables the system to operate within the current Internet infrastructure. In this paper we present the problem area of concurrent design in environmental planning. We present this describing the background of our project, describing the overall architecture of the system and presenting the first findings of user studies.
keywords	Concurrent Design, Interfaces, Legends
series	DDSS
last changed	2003/11/21 15:16

_id	a47a
authors	Bourdakis, V.
year	1998
title	Navigation in Large VR Urban Models. In Virtual Worlds
source	J. Heudin (ed.), Lecture Notes in Artificial Intelligence 1434, Springer, Berlin, pp. 345-356
summary	The aim of this research project is to utilise VR models in urban planning in order to provide easy-to-use visualisation tools that will allow non-experts to understand the implications of proposed changes to their city. In this paper, the navigation problems identified whilst working on large VR city models are discussed and a "fly" based navigation mode is proposed and evaluated.
keywords	3D City modeling
series	other
email
more	http://fos.prd.uth.gr/vas/papers/VW98/
last changed	2003/04/02 11:55

_id	1beb
authors	Coomans, M.K.D. and Timmermans, H.J.P.
year	1998
title	A VR User Interface for Design by Features
source	Timmermans (ed.) Proceedings of the 4th Conference on Design and Decision Support Systems in Architecture and Urban Planning, Maastricht
summary	We present the design of a Virtual Reality based user interface (VR-UI). It is the interface for the VR-DIS system, a design application for the Building and Construction industry (VRDIS stands for Virtual Reality - Design Information System). The interface is characterised by a mixed representation of the task domain: an analogue "mock-up view" is being integrated with a descriptive "feature view". It uses a Fish Tank VR configuration which integrates the virtual objects in the designer's normal working environment. The issues underlying the design of the feature view are discussed, as well as the choice of input devices.
series	other
last changed	2003/04/23 15:50

_id	ddss9812
id	ddss9812
authors	Coomans, M.K.D. and Timmermans, H.J.P.
year	1998
title	A VR-User Interface for Design by Features
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	We present the design of a Virtual Reality based user interface (VR-UI). It is the interface for the VR-DIS system, a design application for the Building and Construction industry (VRDIS stands for Virtual Reality - Design Information System). The interface is characterised by a mixedrepresentation of the task domain: an analogue “mock-up view” is being integrated with a descriptive “feature view”. It uses a Fish Tank VR configuration which integrates the virtual objects in the designer’s normal working environment. The issues underlying the design of the feature view are discussed, as well as the choice of input devices.
series	DDSS
last changed	2003/08/07 16:36

_id	04c9
authors	Crandall, N.F. and Wallace , M.J. (ed.)
year	1998
title	Work & Rewards in The Virtual Workplace
source	Amacom
summary	By now, telecommuting is a well-defined word in the corporate U.S. But how about frontline workplace? Or cyberlink workplace? Consultants Crandall and Wallace make convincing arguments about the efficacies of virtual work, and they outline detailed processes and qualifications for any organization contemplating such a move. In a very logical, almost scholarly, fashion, they define terms, explain implementation, demolish perceived and real obstacles, and prove their points via a few case histories. Yet this is not a cut-and-dried book, for the excitement of dramatic changes to our collective workplaces is captured in the descriptions. Chiat/Day assigns its employees a cell phone and a laptop, period. And at Ross Operating Valve, customers actually lead the creative design process. Job satisfaction? You bet. And a much more productive group of employees. Most important for companies interested in these virtual ideas will be the economics chapter, describing in black and white (and sometimes red) the costs involved.
series	other
last changed	2003/04/23 15:14

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	7f71
authors	De Landa, Manuel
year	1998
title	Meshworks, Hierarchies and Interfaces
source	Virtual Dimension Ed. Beckmann, J., Princeton Architectural Press, NewYork
summary	The world of interface design is today undergoing dramatic changes which in their impact promise to rival those brought about by the use of the point-and-click graphical interfaces popularized by the Macintosh in the early 1980's. The new concepts and metaphors which are aiming to replace the familiar desk-top metaphor all revolve around the notion of semi-autonomous, semi-intelligent software agents. To be sure, different researchers and commercial companies have divergent conceptions of what these agents should be capable of, and how they should interact with computer users. But whether one aims to give these software creatures the ability to learn about the users habits, as in the non-commercial research performed at MIT autonomous agents group, or to endow them with the ability to perform transactions in the users name, as in the commercial products pioneered by General Magic, the basic thrust seems to be in the direction of giving software programs more autonomy in their decision-making capabilities.
series	other
last changed	2003/04/23 15:50

_id	3d1d
authors	De Vries, B. and Jessurun, A.J.
year	1998
title	An Experimental Design System for the Very Early Design Stage
source	Timmermans (ed.) Proceedings of the 4th Conference on Design and Decision Support Systems in Architecture and Urban Planning, Maastricht
summary	The concepts of the experimental design system that are discussed are feature modeling and geometrical constraints. The main technique for creating the user environment is Virtual Reality. Feature modeling forms the basis for managing the design data. To start with, data storage is implemented in a Relational Data Base Management System. Along with this a (traditional) interface is developed for managing the data. Data management consists of feature type creation and feature type instancing. Features are used to define building elements, their relationships and additional constraints. Apart from the design data, geometrical data are stored. Possible design solutions can be limited using geometrical constraints. Specifying connection types between building elements result in a set of solutions for the position of the bounding boxes of the building elements in space.
series	other
email
last changed	2003/04/23 15:50

_id	a15e
authors	Dijkstra, J. and Timmermans, H.J.P.
year	1998
title	Conjoint Analysis and Virtual Reality - A Review
source	Timmermans (ed.), 4 Ih Design and Decision Support Systems in Architecture and Urban Planning Conference.
summary	This paper describes a review of an ongoing research project which aims to develop a conjoint analysis and virtual reality (CA&VR) system as part of a design information system in virtual reality. The research project aims to develop a design system that can be used for interactive design and evaluation of design alternatives. A virtual environment model and dynamic virtual objects representing the different design aspects of interest can present a design. The different design aspects are called attributes. Each attribute level is a different state of the concerned virtual object. In the case of a virtual walk through a building design, the system can be viewed as a visual simulation of the environment. The CA&VR system has the potential advantage that individuals' preferences can be measured in designed hypothetical choice situations. As part of the ongoing research project, principles underlying the CA&VR system will be illustrated by simple examples. The status of this research project, both in retrospect and in prospect will be described.
series	other
last changed	2003/04/23 15:50

_id	ddss9818
id	ddss9818
authors	Dijkstra, Jan and Timmermans, Harry J.P.
year	1998
title	Conjoint Analysis and Virtual Reality – a Review
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper describes a review of an ongoing research project which aims to develop a conjoint analysis and virtual reality (CA&VR) system as part of a design information system in virtual reality. The research project aims to develop a design system that can be used for interactive design and evaluation of design alternatives. A virtual environment model and dynamic virtual objects representing the different design aspects of interest can present a design. The different design aspects are called attributes. Each attribute level is a different state of the concerned virtual object. In the case of a virtual walk through a building design, the system can be viewed as a visual simulation of the environment. The CA&VR system has the potential advantage that individuals’ preferences can be measured indesigned hypothetical choice situations. As part of the ongoing research project, principles underlying the CA&VR system will be illustrated by simple examples. The status of this research project, both in retrospect and in prospect will be described.
series	DDSS
last changed	2003/08/07 16:36

_id	cad3
authors	Gero, J.S.
year	1998
title	Conceptual designing as a sequence of situated acts
source	I. Smith (Ed.), Artificial Intelligence in Structural Engineering, Springer, Berlin, pp. 165-177
summary	This paper introduces conceptual designing within an F-B-S framework. It then goes on to describe a number of models of designing before introducing the notions of situatedness and situated acts. The remainder of the paper describes the role of situatedness and situated acts in conceptual designing. It attempts to show that a number of otherwise difficult design phenomena are modelable using situatedness and situated acts. A demonstration example concludes the paper along with some of the research issues this view of designing brings with it.
keywords	Conceptual Designing, Situatedness
series	other
email
last changed	2003/04/06 09:01

_id	ddss9822
id	ddss9822
authors	Gribnau, M.W., Verstijnen, I.M. and Hennessey, J.M.
year	1998
title	Three Dimensional Object Orientation Using the Non-Dominant Hand
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper presents the “Turntable”, a 3D input device for orienting objects using the non-dominant hand. The device supports two-handed manipulation by allowing the non-dominant hand to orient an object while leaving the dominant hand free to perform other actions. Two-handed input is a technique that can enhance the performance, simplicity and intuitiveness of CAD systems. These properties are obligatory for CAD systems dedicated to support the conceptual phase of the design process. Anexperiment has been conducted in which the performance of the Turntable was compared to that of a well known 3D orientation method, known in literature as the “virtual sphere”. The virtual sphere is operated with the mouse using the dominant hand and is documented to be easy to use and efficient. The experiment establishes that a performance gain can be expected from a two-handed user interface that employs the Turntable for 3D object orientation with the non-dominant hand. In a single-handedinterface users must switch between rotating and manipulating an object. In a two-handed interface however, task switching is unnecessary and an additional performance benefit can be achieved when there is temporal overlap in the execution of the two tasks. Experimental results show that the Turntable, operated by the non-dominant hand, is easy to learn and its performance and accuracy are nearly equal to that of the virtual sphere operated by the dominant hand. With these results it can now be expected that a two-handed interface utilizing the Turntable performs better than a single-handed one for manipulating objects in 3D.
series	DDSS
last changed	2003/08/07 16:36

_id	c65d
authors	Habraken, N.J. and Teicher, J (ed.)
year	1998
title	The Structure of the Ordinary
source	MIT Press, Cambridge, USA, pp. 73-76
summary	According to N. J. Habraken, intimate and unceasing interaction between people and the forms they inhabit uniquely defines built environment. The Structure of the Ordinary, the culmination of decades of environmental observation and design research, is a recognition and analysis of everyday environment as the wellspring of urban design and formal architecture. The author's central argument is that built environment is universally organized by the Orders of Form, Place, and Understanding. These three fundamental, interwoven principles correspond roughly to physical, biological, and social domains. Historically, "ordinary" environment was the background against which architects built the "extraordinary." Drawing upon extensive examples from archaeological and contemporary sites worldwide, the author illustrates profound recent shifts in the structure of everyday environment. One effect of these transformations, Habraken argues, has been the loss of implicit common understanding that previously enabled architects to formally enhance and innovate while still maintaining environmental coherence. Consequently, architects must now undertake a study of the ordinary as the fertile common ground in which form- and place-making are rooted. In focusing on built environment as an autonomous entity distinct from the societies and natural environments that jointly create it, this book lays the foundation for a new dialogue on methodology and pedagogy, in support of a more
series	other
last changed	2003/04/23 15:14

_id	ddss9824
id	ddss9824
authors	Halin, G., Bignon, J.C.,Benali, K. and Godart, C.
year	1998
title	Cooperation models in co-design: application to architectural design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper focuses on cooperation concepts necessary for managing concurrent engineering. It reports on a research work being done in a project which establishes a connection between computer sciences, architecture, and telecommunications research1. Simple electronic cooperation paradigms (also called generic cooperation bricks) are found by analysing the current usage of human cooperation in the domainof AEC design environments. We introduce the principles of a middleware to build easily cooperative applications to assist cooperative design. In this approach, the design actors choose cooperation forms by instancing adapted generic cooperation bricks.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9825
id	ddss9825
authors	Hartog, J. P. den, Koutamanis, A. and Luscuere, P. G.
year	1998
title	Simulation and evaluation of environmental aspects throughout the designprocess
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The evaluation of environmental aspects in architectural design has traditionally been performed by means of simple (and often simplistic) rule systems. These generally remain at the normative level of minimal control one encounters in building rules and regulations, thereby failing to provide sufficient information and clarity for design guidance. Despite this, evaluation results normally bound subsequent design decisions as fundamental, inflexible constraints. At much later design stages, whenarchitectural form has been largely crystallized and when environmental subsystems must be specified in detail, both the architect and the contributing engineers often realize the severe limitation of theinitial choices. A frequently voiced argument for such simplification in the guise of abstraction is the lack of detailed information on the form and functional content of a building in the early stages of the designprocess. This obviously presupposes a tabula rasa generative approach. The application of a priori knowledge in the form of types, cases, precedents and automated recognition permits direct transaction from the abstract to the specific at and between a number of predefined relevant abstraction levels in the representation. The combination of a priori knowledge at the typological level with multilevel representations permits the use of precise simulation techniques already in the early design stages and throughout thedesign process. The simulation results employ the dual representation principle of scientific visualization, thereby linking form with measurable performance. Feedback from the simulation provides the analysis and evaluation means for design guidance and for communication between thearchitect and the contributing engineers. A prerequisite to this is that the abstraction level in the representation constrains the analysis derived from the simulation, e.g., by means of grades of fuzziness applied to different zones in the representation on the basis of information specificity.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9835
id	ddss9835
authors	Langelaan, J. Willem R.
year	1998
title	Criteria for an object oriented library system of high–level parametric CADelements
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The subject of this paper is the development of criteria and specifications for an object oriented library system of high–level parametric elements that have an integrated 2D and 3D representation. High–levelelements are virtual representations of architectural elements such as windows, doors, etc. High–level parametric elements need few components to be flexible and easily customizable. The generalization ofeach element by its characteristic parts results in a substantial reduction in the number of polygons that must be processed by the computer during the 3D transformation, graphically clean 3D images and low demandon user intervention. Gestalt theory emphasizes the importance of contour lines for the perception of an element. The “minimalist” symbolic representation will simplify contour lines that enhance perception. Theinherent flexibility and functionality of object oriented elements are augmented when the elements are rigorously developed as an object oriented library system, with classes and sub-classes of elements whichinherit characteristics of the parent–class. Attribute values of a parent–class give the user global control over all instances of that class and its sub–classes in the model’s database. The concepts which SystemsTheory uses for making an abstraction of reality are analogous to the concepts used in object oriented programming. This paper describes how Systems Theory is used as tool to develop high–level parametric elements as a functionally and computationally efficient library system.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9838
id	ddss9838
authors	Mallory-Hill, Shauna
year	1998
title	Building a Case-Based Design Assistant forWorkplace Environment Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper reports on the early stages of development of a case-based design tool. The purpose of this tool, called the Workplace Environment Design Advisor (WEDA), is to support architects in the conceptual design of workplace environments. The objective of this system is to provide electronic storage, retrieval and the exploration of post-occupancy performance knowledge of workplace environments. The paper provides a description of the reasoning behind choosing a case-based approach and thesteps used to develop a prototype case-based system. This includes recent efforts to collect and structure real case data. This experience led to observations about issues such as case content (the availability and format of post-occupancy data) and retrieval strategies. The data collected for use in the system is based on a building-in-use study of the Centre ofBuilding Research’s office rooms located at the University of Eindhoven, the Netherlands.
series	DDSS
last changed	2003/08/07 16:36

_id	6b49
authors	McMahon, C. and Browne, J.
year	1998
title	CADCAM: Principles, Practice and Manufacturing Management
source	2nd ed. Reading, Massachusetts: Addison-Wesley
summary	The application of computers to the product design and manufacturing process, known as CADCAM, is a successful and important technology which integrates the traditionally separate disciplines of Design and Manufacture. Presenting an ideal mix of theory, practice, and analysis along with real-life applications, this book offers an accessible introduction to CADCAM.
series	other
last changed	2003/04/23 15:14

_id	ddss9845
id	ddss9845
authors	Reymen, Isabelle M.M.J.
year	1998
title	Design in Architecture, Software Engineering and Mechanical EngineeringA comparative study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The awareness about the gap between general design theory and design practice is increasing. Design practice is not really served with the results of current design theory. To build a bridge between theory and practice, design researchers should know what is really going on in practice. To explore design practice and to find the most important characteristics of design situations, I have chosen an empirical approach based on case studies in which design projects in different disciplines are compared. In each case study, an individual designer is interviewed and the design documents are analysed. The results in this article are based on two architectural projects, two software-engineering projects and two mechanical-engineering projects. The cross-case analysis has resulted indescriptions of design situations in these disciplines. A preliminary design frame to describe design situations in different disciplines has been derived. Based on similarities and differences in the descriptions, conclusions concerning design theory, design education and design practice are given. The most important conclusions are the following. First, designers are often not aware of their design process, but focus mainly on the product. Second, software designers more often than architects andmechanical engineers use methods to structure their overall design process.
series	DDSS
email
last changed	2003/08/07 16:36

For more results click below: