Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 7129

Reformat results as: short short into frame detailed detailed into frame

_id	57bd
authors	Inanc, B. Sinan
year	2000
title	Casebook. An Information Retrieval System for Housing Floor Plans
doi	https://doi.org/10.52842/conf.caadria.2000.389
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 389-398
summary	Floor plans are representations of choice for spatial information in architectural practice. They are expressive, readable, and familiar. My research examines possible uses of floor plan layouts in architectural information systems. Classification problems that arise are addressed by lazy computation. A prototype in the domain of residential units, CaseBook, has been developed and implemented. CaseBook uses graphical floor plans as core representations for storage, classification and retrieval. To reflect the plasticity of interpretations inherent to the complex and ill-defined architectural domain, the focus is on the flexibility of classification schemes. Flexibility is achieved through the application of adaptable automatic feature extraction and classification-on-demand by user-selected criteria. Queries can be graphically expressed in example layouts. The system ranks layouts according to their similarity to a query based on weighted nearest neighbor algorithm.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	95b0
authors	Bermudez, J., Agutter, J., Lilly,. B., Syroid, N., Westenskow, D., Gondeck-Becker, D. Foresti, S. and Sharir, Y.
year	2000
title	CyberPRINT: Hacia una Arquitectura del Ser (CyberPRINT: Towards an Architecture of the Being)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 220-223
summary	This project involves the design, construction and performance of an “architecture of being” that expresses selfhood in virtual space and real time using: (1) physiological data as its building material, (2) architectural design as its expressive intent, (3) digital space as its medium, (4) screen projection as its enveloping and viewing technique, (5) user interactivity and performance as its partner, and (6) interdisciplinary collaborations among Architecture, Choreography, Modern Dance, Music, Bioengineering, Medicine and Computer Science as its creative and technical contexts. // The paper presents the implementation of the cyberPRINT during a series of techno-media performances at the Rose Wagner Performing Art Center in Salt Lake City, USA, in May 2000. This work is believed to be the first of its kind in the world. The cyberPRINT is building a new area of creative inquiry in Architecture by means of collaborations with the Arts and Sciences.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cd17
authors	Bermudez, J., Agutter, J., Westenskow, D., Foresti, S., Zhang, Y., Gondeck-Becker, D., Syroid, N., Lilly, B., Strayer, .D. and Drews, F.
year	2000
title	Data Representation Architecture: Visualization Design Methods, Theory and Technology Applied to Anesthesiology
doi	https://doi.org/10.52842/conf.acadia.2000.091
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 91-102
summary	The explosive growth of scientific visualization in the past 10 years demonstrate a consistent and tacit agreement among scientists that visualization offers a better representation system for displaying complex data than traditional charting methods. However, most visualization works have not been unable to exploit the full potential of visualization techniques. The reason may be that these attempts have been largely executed by scientists. While they have the technical skills for conducting research, they do not have the design background that would allow them to display data in easy to understand formats. This paper presents the architectural methodology, theory, technology and products that are being employed in an ongoing multidisciplinary research in anesthesiology. The project’s main goal is to develop a new data representation technology to visualize physiologic information in real time. Using physiologic data, 3-D objects are generated in digital space that represent physiologic changes within the body and show functional relationships that aid in the detection, diagnosis, and treatment of critical events. Preliminary testing results show statistically significant reduction in detection times. The research outcome, potential, and recently received NIH grant supporting the team’s scientific methods all point to the contributions that architecture may offer to the growing field of data visualization.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	9bc4
authors	Bhavnani, S.K. and John, B.E.
year	2000
title	The Strategic Use of Complex Computer Systems
source	Human-Computer Interaction 15 (2000), 107-137
summary	Several studies show that despite experience, many users with basic command knowledge do not progress to an efficient use of complex computer applications. These studies suggest that knowledge of tasks and knowledge of tools are insufficient to lead users to become efficient. To address this problem, we argue that users also need to learn strategies in the intermediate layers of knowledge lying between tasks and tools. These strategies are (a) efficient because they exploit specific powers of computers, (b) difficult to acquire because they are suggested by neither tasks nor tools, and (c) general in nature having wide applicability. The above characteristics are first demonstrated in the context of aggregation strategies that exploit the iterative power of computers.Acognitive analysis of a real-world task reveals that even though such aggregation strategies can have large effects on task time, errors, and on the quality of the final product, they are not often used by even experienced users. We identify other strategies beyond aggregation that can be efficient and useful across computer applications and show how they were used to develop a new approach to training with promising results.We conclude by suggesting that a systematic analysis of strategies in the intermediate layers of knowledge can lead not only to more effective ways to design training but also to more principled approaches to design systems. These advances should lead users to make more efficient use of complex computer systems.
series	other
email
last changed	2003/11/21 15:16

_id	eabb
authors	Boeykens, St. Geebelen, B. and Neuckermans, H.
year	2002
title	Design phase transitions in object-oriented modeling of architecture
doi	https://doi.org/10.52842/conf.ecaade.2002.310
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 310-313
summary	The project IDEA+ aims to develop an “Integrated Design Environment for Architecture”. Its goal is providing a tool for the designer-architect that can be of assistance in the early-design phases. It should provide the possibility to perform tests (like heat or cost calculations) and simple simulations in the different (early) design phases, without the need for a fully detailed design or remodeling in a different application. The test for daylighting is already in development (Geebelen, to be published). The conceptual foundation for this design environment has been laid out in a scheme in which different design phases and scales are defined, together with appropriate tests at the different levels (Neuckermans, 1992). It is a translation of the “designerly” way of thinking of the architect (Cross, 1982). This conceptual model has been translated into a “Core Object Model” (Hendricx, 2000), which defines a structured object model to describe the necessary building model. These developments form the theoretical basis for the implementation of IDEA+ (both the data structure & prototype software), which is currently in progress. The research project addresses some issues, which are at the forefront of the architect’s interest while designing with CAAD. These are treated from the point of view of a practicing architect.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	8e02
authors	Brown, A.G.P. and Coenen, F.P.
year	2000
title	Spatial reasoning: improving computational efficiency
source	Automation in Construction 9 (4) (2000) pp. 361-367
summary	When spatial data is analysed the result is often very computer intensive: even by the standards of contemporary technologies, the machine power needed is great and the processing times significant. This is particularly so in 3-D and 4-D scenarios. What we describe here is a technique, which tackles this and associated problems. The technique is founded in the idea of quad-tesseral addressing; a technique, which was originally applied to the analysis of atomic structures. It is based on ideas concerning Hierarchical clustering developed in the 1960s and 1970s to improve data access time [G.M. Morton, A computer oriented geodetic database and a new technique on file sequencing, IBM Canada, 1996.], and on atomic isohedral (same shape) tiling strategies developed in the 1970s and 1980s concerned with group theory [B. Grunbaum, G.C. Shephard, Tilings and Patterns, Freeman, New York, 1987.]. The technique was first suggested as a suitable representation for GIS in the early 1980s when the two strands were brought together and a tesseral arithmetic applied [F.C. Holdroyd, The Geometry of Tiling Hierarchies, Ars Combanitoria 16B (1983) 211–244.; S.B.M. Bell, B.M. Diaz, F.C. Holroyd, M.J.J. Jackson, Spatially referenced methods of processing raster and vector data, Image and Vision Computing 1 (4) (1983) 211–220.; Diaz, S.B.M. Bell, Spatial Data Processing Using Tesseral Methods, Natural Environment Research Council, Swindon, 1986.]. Here, we describe how that technique can equally be applied to the analysis of environmental interaction with built forms. The way in which the technique deals with the problems described is first to linearise the three-dimensional (3-D) space being investigated. Then, the reasoning applied to that space is applied within the same environment as the definition of the problem data. We show, with an illustrative example, how the technique can be applied. The problem then remains of how to visualise the results of the analysis so undertaken. We show how this has been accomplished so that the 3-D space and the results are represented in a way which facilitates rapid interpretation of the analysis, which has been carried out.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	93cc
authors	Colajanni, B., Pellitteri, G. and Concialdi, S.
year	2000
title	Retrieval Tools in Building Case Bases
doi	https://doi.org/10.52842/conf.ecaade.2000.113
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 113-116
summary	Most of the existing aids to building design rely on data base of cases representing solutions to problems that are thought to happen again at least in a similar way. Crucial for the success of the aid is the retrieval engine. In tour its efficiency depends on the way the cases are encoded. Whichever is this way cases will be represented at different levels of abstraction. The highest level will probably consist in an accessibility and adjacency graph. Another level could be a wire plan of the building. An easily workable representation of a graph is a square matrix. For any given building typology it is possible to write a list of encoded space types. This allows forming matrices that can be compared and their diversity measured. Here we present an algorithm that makes this job. Such an algorithm can be one of the case retrieval tools in the data base. It is likely that the designer has already some idea of the shape he wants for the building he is designing. A comparison between some geometric characteristics of the wire representation of the retrieved case and the corresponding ones of the imagined solution of the design problem can constitute a second test. The matching can be done
keywords	Knowledge, Case Bases, Building, Tools
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:56

_id	5c51
authors	Fukuda, T., Nagahama, R., Oh, S.,Kaga, A. and Sasada, T.
year	2000
title	Collaboration Support System for Nightscape Design Based on VR Technology
doi	https://doi.org/10.52842/conf.caadria.2000.501
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 501-510
summary	This paper reports the collaboration support system for nightscape design based on virtual reality (VR) technology. The developed system consists of two subsystems: a) the semi-spherical screen VR system, b) the desktop VR system. The schematic design of Asagiri pedestrian bridge has been done using these systems.
series	CAADRIA
last changed	2022/06/07 07:50

_id	f586
authors	Gabriel, G. and Maher, M.L.
year	2000
title	Analysis of design communication with and without computer mediation
source	Proceedings of Co-designing 2000, pp. 329-337
summary	With recent developments in CAD and communication technologies, the way we visualise and communicate design representations is changing. A matter of great interest to architects, practitioners and researchers alike, is how computer technology might affect the way they think and work. The concern is not about the notion of 'support' alone, but about ensuring that computers do not disrupt the design process and collaborative activity already going on (Bannon and Schmidt, 1991). Designing new collaborative tools will then have to be guided by a better understanding of how collaborative work is accomplished and by understanding what resources the collaborators use and what hindrances they encounter in their work (Finholt et al., 1990). Designing, as a more abstract notion, is different than having a business meeting using video conferencing. In design it is more important to 'see' what is being discussed rather than 'watch' the other person(s) involved in the discussion. In other words the data being conveyed might be of more importance than the method with which it is communicated (See Kvan, 1994). Similarly, we believe that by using text instead of audio as a medium for verbal communication, verbal representations can then be recorded alongside graphical representations for later retrieval and use. In this paper we present the results of a study on collaborative design in three different environments: face-to-face (FTF), computer-mediated using video conferencing (CMCD-a), and computer-mediated using "talk by typing" (CMCD-b). The underlying aim is to establish a clearer notion of the collaborative needs of architects using computer-mediation. In turn this has the potential in assisting developers when designing new collaborative tools and in assisting designers when selecting an environment for a collaborative session.
series	other
last changed	2003/04/23 15:50

_id	gerardgabriel_phd
id	gerardgabriel_phd
authors	Gabriel, Gerard Caesar
year	2000
title	COMPUTER-MEDIATED COMMUNICATION IN DESIGN
source	PhD Thesis, Faculty of Architecture, University of Sydney
summary	Up till now, architects collaborating with other colleagues did so mostly face-to-face (FTF). They had to be in the same space (co-located) at the same time. Communication was ‘spontaneous’ and ideas were represented, whether verbal or nonverbal, by talking and using ‘traditional drawing tools’. If they were geographically displaced, the interaction was then space affected as well as the probability of being time affected. In this case communication was usually mediated through the telephone, and graphically represented ideas were sent by Fax or posted documents. Recently, some architectural firms started using modems and Internet connections to exchange information, by transferring CAD drawings as well as design information, through e-mail and file transfer protocol (FTP). Discussing ideas in architecture, as a more abstract notion, is different from discussing other more concrete arguments using video conferencing. It is more important to ‘see’ what is being discussed at hand than ‘watch’ the other person(s) involved in the discussion. In other words the data being conveyed might be of more importance than the mode of communication. Taking into consideration recent developments in computer and communication technologies this thesis investigates different communication channels utilised in architectural collaboration through Computer Mediated Collaborative Design (CMCD) sessions as opposed to FTF sessions. This thesis investigates the possible effects these different channels have on collaborative design in general and collaborative design communication in particular. We argue that successful CMCD does not necessarily mean emulating close proximity environments. Excluding certain communication channels in a CMCD environment might affect the flow and quantity of synchronous collaborative communication, but not necessarily the quality and content of mutually communicated and represented design ideas. Therefore different communication channels might affect the type of communication and not necessarily the content of the communication. We propose that audio and video are not essential communication channels in CMCD environments. We posit that architects will collaborate and communicate design representations effectively although with some differences, since those two channels might cause interruptions and successful collaborative sessions can take place without them. For this purpose we conducted twenty-four one-hour experiments involving final year architecture students all working to the same design brief. The experiments were divided into three categories, FTF, full computer mediated collaborative design sessions (CMCD-a; audio-video conferencing plus whiteboard as a shared drawing space) and limited computer mediated collaborative design sessions (CMCD-b; with Lambda MOO used as a chat medium plus whiteboard as a shared drawing space). The experiments were video and audio taped, transcribed and coded into a custom developed coding scheme. The results of the analysed coded data and observations of the videotapes provided evidence that there were noticeable differences between the three categories. There was more design communication and less communication control in the CMCD-b category compared to the FTF and CMCD-a categories. Verbal communication became shorter and straight to the point in CMCD-b as opposed to spontaneous non-stop chat in the other two categories. Moreover in CMCD-b the subjects were observed to be more reflective as well as choosing and re-examining their words to explain ideas to their partners. At times they were seen scrolling back through the text of the conversation in order to re-analyse or interpret the design ideas at hand. This was impossible in FTF and CMCD-a sessions, since the subjects were more spontaneous and audio representations were lost as soon as they were uttered. Also the video channel in the CMCD-a category was ignored and hardly used except for the first few minutes of the experiments, for a brief exchange of light humour on the appearance of each subject. The results obtained from analysing the experiments helped us conclude that different communication channels produce different collaborative environments. The three categories of communication for architectural collaboration explored in our experiments are indicative of the alternatives available to architects now. What is not clear to architects is why they would choose one category over another. We propose that each category has its own strengths and difficulties for architectural collaboration, and therefore should be selected on the basis of the type of communication considered to be most effective for the stage and tasks of the design project.
series	thesis:PhD
type	normal paper
email
last changed	2005/09/09 13:02

_id	acadia20_150
id	acadia20_150
authors	Gaudilliere-Jami, Nadja
year	2020
title	AD Magazine
doi	https://doi.org/10.52842/conf.acadia.2020.1.150
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 150-159.
summary	This paper aims to contribute to a history of computational design and to a historiography of the field by proposing a study of the development of sociotechnical networks of computation in architecture between 1965 and 2020 as shown in AD magazine. The research focuses on two aspects: (1) a methodological approach for the constitution of a comprehensive history of the field and the application of that methodology to a corpus of items published in AD, and (2) questions the relevance of the outlook into computational design as given by the magazine in comparison to a more comprehensive history taking into account other sources. First, the paper presents the history and the editorial line of AD, as well as its pertinence as a primary source. Second, a brief account of the history emerging from this research is given, with a focus on four different periods: pioneering research of the 1960s–1970s, emergence of 3D modeling tools and the procedural winter in the 1980s–1990s, constitution of a large-scale academic and professional network in the 2000s, and democratization of algorithmic design tools in the 2010s. Third, observations are made on editorial choices of the magazine and the biases of its account of computational research, with a special focus on the period 2000–2020, during which many issues have been dedicated to computational design themes, therefore making potential biases more visible. Despite the preponderance of specific topics, editors, and contributors, AD magazine provides an outlook into key concerns of the community at given times. The main biases identified, including a strong focus on the themes of biodesign and rationalization of practices, mirror the biases of the computational field itself, demonstrating the value of AD as an archive for the history of the field.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	70c4
authors	Gross, M.D., Do, E.Y.-L. and Johnson, B.R.
year	2000
title	Beyond the low-hanging fruit: Information technology in architectural design past, present and future
source	W. Mitchell and J. Fernandez (eds), ACSA Technology Conference, MIT Press, Cambridge MA
summary	Today's commercial CAD software is the product of years of research that began in the 1960's and 1970's. These applications have found widespread use in the architectural marketplace; nevertheless they represent only the first fruits of research in computer aided design. New developments based on research in human-computer interaction (HCI), computer-supported collaborative work (CSCW), and virtual reality (VR) will result in a next generation of tools for architectural design. Although preliminary applications to design have been demonstrated in each of these areas, excellent opportunities remain to exploit new technologies and insights in service of better design software. In this paper we briefly examine each of these areas using examples from our own work to discuss the prospects for future research. We envision that future design technologies will develop from current and traditional conventions of practice combined with forward looking application of emerging technologies. In HCI, pen based interaction will allow architects to use the pencil again, without sacrificing the added power of computer aided design tools, and speech recognition will begin to play a role in capturing and retrieving design critique and discussion. In CSCW, a new generation of applications will address the needs of designers more closely than current general purpose meeting tools. In VR, applications are possible that use the technology not simply to provide a sense of three-dimensional presence, but that organize design information spatially, integrating it into the representation of artifacts and places.
series	other
email
last changed	2003/04/23 15:50

_id	326c
authors	Hirschberg, U., Gramazio, F., H¾ger, K., Liaropoulos Legendre, G., Milano, M. and Stöger, B.
year	2000
title	EventSpaces. A Multi-Author Game And Design Environment
doi	https://doi.org/10.52842/conf.ecaade.2000.065
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 65-72
summary	EventSpaces is a web-based collaborative teaching environment we developed for our elective CAAD course. Its goal is to let the students collectively design a prototypical application - the EventSpaces.Game. The work students do to produce this game and the process of how they interact is actually a game in its own right. It is a process that is enabled by the EventSpaces.System, which combines work, learning, competition and play in a shared virtual environment. The EventSpaces.System allows students to criticize, evaluate, and rate each otherÕs contributions, thereby distributing the authorship credits of the game. The content of the game is therefore created in a collaborative as well as competitive manner. In the EventSpaces.System, the students form a community that shares a common interest in the development of the EventSpaces.Game. At the same time they are competing to secure as much credit as possible for themselves. This playful incentive in turn helps to improve the overall quality of the EventSpaces.Game, which is in the interest of all authors. This whole, rather intricate functionality, which also includes a messaging system for all EventSpaces activities, is achieved by means of a database driven online working environment that manages and displays all works produced. It preserves and showcases each authorÕs contributions in relation to the whole and allows for the emergence of coherence from the multiplicity of solutions. This Paper first presents the motivation for the project and gives a short technical summary of how the project was implemented. Then it describes the nature of the exercises and discusses possible implications that this approach to collaboration and teaching might have.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:50

_id	b18b
authors	Hnat, B. and Chapman, S.C.
year	2000
title	Visualisation of multiscale datasets in numerical models of complex systems
source	CIDAC, Volume 2 Issue 4 November 2000, pp. 236-241
summary	Recently advanced visualisation techniques receive increasing attention among scientists and engineers. These techniques should not only allow a direct analysis of multidimensional structures to provide intiutive and quick comparison of experimental data with model results, but also yield quantitative measures to support or negate the model itself. A key phenomenology of complex systems is that they are multiscale, i.e. the structures of interest in the data are on the wide range of spatiotemporal scale. Here we examine a simple, yet generic, example, a sandpile (avalance model), the threshold coupled map lattice (CML). The emergent phenomenology is broadband, but is represented on a (finite) grid. To study the 3-dimensional evolution of the threshold CML model of a sandpile as a function of control parameters, a semi-immersive virtual reality (VR) environment has been used. Sandpile profiles are calculated in real time and are superimposed over the colour grid respresenting one of the control parameters. This represents a generic problem of visualising multiscale structures in datasets derived from non-linear systems. The software models were developed in OpenGL and Glut library and will ultimately be implemented in semi-immersive VR on ImmersaDesk. To achieve sufficient speed in real-time display and to ultimately facilitate computational steering, the full data set must be represented geographically in a compact form without loss of information.
keywords	Semi-Immersive Virtual Reality, 3-Dimensional Visualisation, OpenGL, CML
series	journal paper
last changed	2003/05/15 21:23

_id	2004_024
id	2004_024
authors	Holmgren, S., Rüdiger, B., Storgaard, K. and Tournay, B.
year	2004
title	The Electronic Neighbourhood - A New Urban Space
doi	https://doi.org/10.52842/conf.ecaade.2004.024
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 24-34
summary	During the event Cultural Market Days on 23 and 24 August 2003 at Noerrebro Park in Copenhagen, visitors could also enter the marketplace from their home via the Internet, as a digital 3D model had been constructed that showed the marketplace with all its information booths and activities. This virtual marketplace functioned as an extension of the urban space, allowing you to take part in the flow of information, activities and experiences that were offered in the marketplace. And this just by a click on the Internet address: http://www.e-kvarter.dk. Furthermore at certain times of the day you could chat with people from some of the many working groups of the urban regeneration project in Noerrebro. The digital 3D model is similar to the marketplace, but it creates its own universe in the green surroundings of Noerrebro Park. And now, when the Cultural Market Days are finished and the booths and people have gone, the Electronic Marketplace still remains on the Internet, with a potential for developing a new public space for information, dialogue and cooperation between the actors of the urban regeneration project. This paper presents the results of a 3-year research project, The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban regeneration project in Copenhagen. The Danish Agency for Enterprise and Housing, the Ministry for Refugees, Immigration and Integration and Copenhagen Municipality have financed the research, which is planned to be published 2004. The results can also be followed on the Internet www.e-kvarter.dk.
keywords	3D Modelling; Virtual Environments; Design Process; Human-Computer Interaction; Collaborative Design; Urban Planning
series	eCAADe
last changed	2022/06/07 07:50

_id	0014
authors	Hsu, W. and Liu, B.
year	2000
title	Conceptual design: issues and challenges
source	Computer-Aided Design, Vol. 32 (14) (2000) pp. 849-850
summary	Decisions made during conceptual design have significant influence on the cost, performance, reliability, safety and environmental impact of a product. It has been estimated that design decisions account for more than 75% of final product costs. It is, therefore, vital that designers have access to the right tools to support such design activities. In the early 1980s, researchers began to realize the impact of design decisions on downstream activities. As a result, different methodologies such as design for assembly, design for manufacturing and concurrent engineering, have been proposed. Software tools that implement these methodologies have also been developed. However, most of these tools are only applicable in the detailed design phase. Yet, even the highest standard of detailed design cannot compensate for a poor design concept formulated at the conceptual design phase. In spite of this, few CAD tools have been developed to support conceptual design activities. This is because knowledge of the design requirements and constraints during this early phase of a product's life cycle is usually imprecise and incomplete, making it difficult to utilize computer-based systems or prototypes. However, recent advances in fields such as fuzzy logic, computational geometry, constraints programming and so on have now made it possible for researchers to tackle some of the challenging issues in dealing with conceptual design activities. In this special issue, we have gathered together discussions on various aspects of conceptual design phase: from the capturing of the designer's intent, to modelling design constraints and solving them in an efficient manner, to verifying the correctness of the design.
series	journal paper
email
last changed	2003/05/15 10:54

_id	45c6
authors	Jegó-Araya, N., Contreras-Higuera, W. and Alarcón, G.
year	2000
title	Comunicacion Visual Educativa y Multimedia. Apuntes Docentes para una Biblioteca Virtual - (Instructional Visual Communication in Multimedia. Educational notes for a Virtual Library)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 319-321
summary	Visual Communication researches of Chile and Mexico are studying a basic model to optimize the development multimedial supports used in the teaching - learning process. The investigation contrasts supports developed conventionally with supports containing variables of redundancy, hierarchy of contents, navigation and visual noise. The analysis applied in Graphic Design students of the Universities of Bío-Bío of Chile and Autónoma Metropolitana of Mexico, included the design of four “electronic books”, two prescribed by the governing model, and other two were modified by the mentioned variables. The Following aspects were evaluated: navigation facility, message’s visibility and legibility, level of comprehension and application of contents and level of user’s acceptance. The results show that the adequate control of variables are in some instances so much or more important than assigned them to the semantic treatment, mainly because involve to the content in a learning sensorial.
series	SIGRADI
last changed	2016/03/10 09:53

_id	f51d
authors	Jones, Angie, Davis, B., Miller, S., Olsen, S. and Bonney, S.
year	2000
title	3D Studio Max 3 Professional Animation with CDROM
source	New Riders Publishing
summary	The market for 3D professionals is growing. More educational institutions are offering classes on the subject and more specialized training houses are going into business. Bearing this in mind, animation skills are invaluable to serious graphics professionals, and using 3D Studio MAX 3 as an animation tool can significantly increase their marketability as animators. This book is focused toward intermediate MAX users who are looking to take their animation skill to the next level. 3D Studio MAX 3 Professional Animation shows you how to use tools and commands together to obtain professional animation results.
series	other
last changed	2003/02/26 18:58

_id	7e64
authors	Koutamanis, Alexander
year	1999
title	Approaches to the Integration of CAAD Education in the Electronic Era: Two Value Systems
doi	https://doi.org/10.52842/conf.ecaade.1999.238
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 238-243
summary	In recent years the democratization of information and communication technologies (ICT) has become the greatest influence on the structure of CAAD education. While the content of the CAAD courses simply had to absorb the new technological possibilities, the structure of the courses and in particular their relationship to the rest of the curriculum has become the subject of speculation and experimentation. Integration of CAAD education in an architectural curriculum occurs either by (a) placing emphasis on designing in CAAD courses, or by (b) integrating computing in design courses. Both approaches respond to the democratization of ICT by making design computing widely available and acceptable. Further improvement is possible if the student becomes the carrier of integration. This is based on the long-term amplification of two value systems. The first refers to personal cognition: rather than rewarding a student with the teacher's approval, educational goals should be translated into individual skills and knowledge. The second system addresses the values of the peer group: such groups support learning by comparison to other individuals and emerging communal characteristics, either as a result of competition or for reasons of assimilation.
keywords	Education, Democracy, Personal Cognition
series	eCAADe
email
last changed	2022/06/07 07:51

_id	6cc5
authors	Kowaltowski, D.C.C.K., Da Silva, V.G., Gouveia, A.P.S., Pina. G., Ruschel, R.C., Filho, F.B. and Fávero, E.
year	2000
title	Ensino de Projeto com Inserção da Informática Aplicada: O curso de Arquitetura e Urbanismo da UNICAMP (Design Teaching with the Introduction of Applied Computing: The Architecture and Urbanism course at UNICAMP)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 352-354
summary	This paper discusses the formal educational base of the Architecture course of the State University of Campinas, UNICAMP, which opened in 1999. Applied computing, thoerical content and technical aspects of design are principal educational elements of the course. The paper will show and discuss the structure of building up knowledge for design activities through drafting, applied computing and theory and practical design disciplines present in the course.
series	SIGRADI
email
last changed	2016/03/10 09:54

For more results click below: