Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 952

Reformat results as: short short into frame detailed detailed into frame

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	bbb9
authors	Blaise, Jean-Yves and Dudek, Iwona
year	1999
title	SOL: Spatial and Historical Web-Based Interface for On Line Architectural Documentation of Krakow's Rynek Gowny
doi	https://doi.org/10.52842/conf.ecaade.1999.700
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 700-707
summary	Our paper presents recent developments of a co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France), specialised in computer science and the HAiKZ Institute of Krakow's Faculty of Architecture, specialised in architectural heritage and conservation. Before undertaking any action to a listed building or interventions in its neighbourhood, it is vital to gain a clear understanding of the building in question. Numerous heterogeneous data detained by diverse institutions has to be handled. This process can be greatly eased by enhanced classification of the information. The development we present is a multidisciplinary platform independent information tool dedicated to education and research. SOL uses an http protocol centred computer architecture connecting a relational database, a VRML 2.0 representation module and a web search interface. It allows searches and updating of the database through a standard text based interface, a VRML 2.0 graphical module and a thematic interface. SOL is experienced on the urban fabric of the Main Square (Rynek Gówny) in Kraków. The choice of a web-centred development, both in the search and updating interface and in the representation module provides platform independence and distant access to the database, and enables successive contributions of students or researchers.
keywords	Web Interface, Database, Architectural Heritage Environment, Information Module, Historical Evolutions
series	eCAADe
email
more	http://alberti.gamsau.archi.fr
last changed	2022/06/07 07:52

_id	ga0023
id	ga0023
authors	Brotzu, PierPaolo and Maiocchi, Marco
year	2000
title	A Generative Approach to Variations in Production Processes
source	International Conference on Generative Art
summary	Many work procedures in generating various types of products (such as execution of recipes for food, work operation for leather, procedures for conservation of vegetables, factory workmanship processes, etc) are characterised by precise procedural steps. Each step can be defined, at the proper detail level, in terms of kind of operations, input conditions, output results; then, a complete procedure can be exploited as a set of partially ordered steps of such a kind of functions. The formalisation of such a steps allows to evaluate procedures devoted to the same goal, introducing metrics for comparing them in terms of originality or imitation. Furtherly, a contextual analysis of different procedures devoted to similar goals allows to verify possible variations in the procedures, introducing innovation and changes on the basis of the available examples. The changes can be automated through proper algorithms, just using techniques of learning by examples, in the respect of verifiable constraints. The results can be verified, and used again as a new enriched experienced basis to improve the innovation procedures. The paper will describe the approach for the analysis and the description, will propose an experienced metric, and will show examples of generation of new innovative methods based on the automated analysis of successful examples. All the practical examples will be expressed in cooking recipes, described, compared in terms of plagiarism with properly defined metrics, improved with automatic generation based on experience and examples, properly checked and validated.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	sigradi2006_e183a
id	sigradi2006_e183a
authors	Costa Couceiro, Mauro
year	2006
title	La Arquitectura como Extensión Fenotípica Humana - Un Acercamiento Basado en Análisis Computacionales [Architecture as human phenotypic extension – An approach based on computational explorations]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 56-60
summary	The study describes some of the aspects tackled within a current Ph.D. research where architectural applications of constructive, structural and organization processes existing in biological systems are considered. The present information processing capacity of computers and the specific software development have allowed creating a bridge between two holistic nature disciplines: architecture and biology. The crossover between those disciplines entails a methodological paradigm change towards a new one based on the dynamical aspects of forms and compositions. Recent studies about artificial-natural intelligence (Hawkins, 2004) and developmental-evolutionary biology (Maturana, 2004) have added fundamental knowledge about the role of the analogy in the creative process and the relationship between forms and functions. The dimensions and restrictions of the Evo-Devo concepts are analyzed, developed and tested by software that combines parametric geometries, L-systems (Lindenmayer, 1990), shape-grammars (Stiny and Gips, 1971) and evolutionary algorithms (Holland, 1975) as a way of testing new architectural solutions within computable environments. It is pondered Lamarck´s (1744-1829) and Weismann (1834-1914) theoretical approaches to evolution where can be found significant opposing views. Lamarck´s theory assumes that an individual effort towards a specific evolutionary goal can cause change to descendents. On the other hand, Weismann defended that the germ cells are not affected by anything the body learns or any ability it acquires during its life, and cannot pass this information on to the next generation; this is called the Weismann barrier. Lamarck’s widely rejected theory has recently found a new place in artificial and natural intelligence researches as a valid explanation to some aspects of the human knowledge evolution phenomena, that is, the deliberate change of paradigms in the intentional research of solutions. As well as the analogy between genetics and architecture (Estévez and Shu, 2000) is useful in order to understand and program emergent complexity phenomena (Hopfield, 1982) for architectural solutions, also the consideration of architecture as a product of a human extended phenotype can help us to understand better its cultural dimension.
keywords	evolutionary computation; genetic architectures; artificial/natural intelligence
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ddssar0023
id	ddssar0023
authors	Jens Pohl, Art Chapman, and Kym Jason Pohl
year	2000
title	Computer-aided design systems for the 21st century: some design guidelines
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	This paper proposes nine design principles for a new generation of computer-aided design (CAD) systems that actively support the decision making and problem solving activities of environmental design. Foremost among these are: a meaningful internal object-based representation of the artifact being designed within its environmental context; a collaborative problem solving paradigm in which the human designer and the computer form a complementary partnership; and, the notion of decision-support tools rather than predefined solutions. Two prototype computer-aided design systems implemented by the CAD Research Center that embody most of these concepts are described. ICADS (Intelligent Computer-Aided Design System) incorporates multiple expert agents in domains such as natural and artificial lighting, noise control, structural system selection, climatic determinants, and energy conservation. Given a particular building design context, the agents in ICADS draw upon their own expertise and several knowledgebases as they monitor the actions of the human designer and collaborate opportunistically. KOALA (Knowledge-Based Object-Agent Collaboration) builds on the multi-agent concepts embodied in ICADS by the addition of two kinds of agents. Mentor agents represent the interests of selected objects within the ontology of the design environment. In the implemented KOALA system building spaces are represented by agents capable of collaborating with each other, with domain agents for the provision of expert services, and with the human designer. Facilitator agents listen in on the communications among mentor agents to detect conflicts and moderate arguments. While both of these prototype systems are limited in scope by focussing on the earliest design stages and restricted in their understanding of the inherent complexity of a design state, they nevertheless promise a paradigm shift in computer-aided design.
series	DDSS
last changed	2003/08/07 16:36

_id	ga0011
id	ga0011
authors	Maldonado, Gabriel
year	2000
title	Travels in Space and Time, Explorations of Virtual SoundScapes, Multi-dimensionalism of Digital Music
source	International Conference on Generative Art
summary	Composition and performance of Computer Music still keep some of the features of traditional music, together with new ones. Rhythm, melody, harmony can still be present in new paradigms (even if they are not necessarily required when dealing with computer music), but new compositional parameters are coming to light, causing the term «music» not always to be appropriate to describe new phenomena of sonic art. This paper will show some new paradigms of this kind of sonic art, as well as different view of old ones. Any past dogmas should be wiped out when dealing with digital arts. The rebellion against tonality of the first half of 20th century is surpassed now, and I believe that new music could use harmonic intervals without generating conflicts with the ideological problems which arose at that time (even if there are still many people who don’t admit it). Actually, digital domain opens a huge amount of unexplored worlds, making any past ideological dogma a prison we should free ourselves from. Nowadays, making music has many things in common with visual arts and scientific research. Many musical parameters can be applied to video arts, architecture, and vice-versa. Structure of sound has a lot of similarities with many other physical phenomena such as inner atomic structure, particle physics, astronomy, biology etc. This paper will deal with new uses and interpretations of old musical parameters (rhythm, harmony, melody) together with a presentation of some of the new ones. Debated topics are: ? Harmonic/inharmonic sounds, rhythm and melodies. The Deep Harmony (the harmony of spheres or cosmic harmony CYCLES). ? The inner structure and evolution of a single sound ? Interpretative music: Music generated by exploration of soundscapes or sonic architectures, generative processes constrained by interpreter’s gestures, state transitions between musical structures. ? Generative music: stocastic generation, algorithmic composition, levels of action. ? Music or non-music this is the problem (a terminology problem) ? Hyper-spatial music, virtual times, hyper-times. Time travels by means of sonic matter. ? Visual music. Generating 3D video by means of musical processes.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	e12c
authors	Wingham, Ivana
year	1999
title	Digital Space, Social Technology and Virtual Force as Determinants of Design in the 21st Century
doi	https://doi.org/10.52842/conf.ecaade.1999.122
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 122-126
summary	It is appropriate to begin with salient quotes relating to the Interface Paradigm: 'The grand abstraction of man as the measure of all things, as an originary condition, a whole presence, can no longer be sustained' P. Eisenmann, 1986 'Although notions of adaptation are perhaps most familiar from biology, the most important ideas about adaptation in the history of AI are actually sociological' P.E.Agre, 1998 'When several bureaucracies coexist (governmental, academic, ecclesiastic) in the absence of super hierarchy to co-ordinate the interactions, the whole set of institutions will tend to form a meshwork of hierarchies, articulated mostly through local and temporary links' M. De Landa 1998
keywords	Interface, Social Space, Virtual Force
series	eCAADe
last changed	2022/06/07 07:57

_id	acadia19_246
id	acadia19_246
authors	Zhang, Viola; Qian, William; Sabin, Jenny
year	2019
title	PolyBrickH2.0
doi	https://doi.org/10.52842/conf.acadia.2019.246
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 246-257
summary	This project emerged from collaborative trans-disciplinary research between architecture, engineering, biology, and materials science to generate novel applications in micro-scale 3D printed ceramics. Specifically, PolyBrick H2.0 adapts internal bone-based hydraulic networks through controlled water flow from 3D printed micro-textures and surface chemistry. Engagement across disciplines produced the PolyBrick series at the Sabin Lab (Sabin, Miller, and Cassab 2014) . The series is a manifestation of novel digital fabrication techniques, bioinspired design, materials inquiry, and contemporary evolutions of building materials. A new purpose for the brick is explored that is not solely focused on the mechanical constraints necessary for built masonry structures. PolyBrick H2.0 interweaves the intricacies of living systems (beings and environments combined) to create a more responsive and interactive material system. The PolyBrick 2.0 series looks at human bone as a design model for foundational research. PolyBrick H2.0 merges the cortical bone hydraulic network with new functionalities as a water filtration and collection system for self-preservation and conservation as well as passive cooling solutions. It also pushes the ability of 3D printing techniques to the microscale. These functionalities are investigated under context for a better construction material, but its use may extend further.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	e978
authors	[Zupancic] Strojan, Tadeja Z.
year	1999
title	CyberUniversity
doi	https://doi.org/10.52842/conf.ecaade.1999.196
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 196-200
summary	The study of a cyberuniversity derives from an analogy between real urban space and its virtual "substitution". It represents an attempt to balance some views, which seems to be contrary, exclusive, but they are just parts of the same wholeness. Especially the notion of a cyber society is lately considered such an exaggeration, that it is possible to forget the meaning of a real life experience and interactions, which are already threatened. One should contribute to the awarness that is used in such a comparison, it is "just" an analogy, not a real similarity. At the same time it is possible to point out some limitations of a cyberspace and indicate a more realistic view of the meaning of cyber communities. Awarness of the development processes could help to find a balance between reality and virtuality, using cyberfacilities not to destroy us (our identity) but to improve the quality of our (real) life.
keywords	University, Cyberuniversity, Space, Cyberspace
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	4cd1
authors	Abdelmawla, S., Elnimeiri, M. and Krawczyk, R.
year	2000
title	Structural Gizmos
doi	https://doi.org/10.52842/conf.acadia.2000.115
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 115-121
summary	Architects are visual learners. The Internet has enabled interactive learning tools that can be used to assist in visual thinking of structural concepts, especially at the introductory levels. Here, we propose a visual approach for understanding structures through a series of interactive learning modules, or ’gizmos’. These gizmos, are the tools that the student may use to examine one structural concept at a time. Being interactive, they offer many more possibilities beyond what one static problem can show. The approach aims to enhance students’ visual intuition, and hence understanding of structural concepts and the parameters affecting design. This paper will present selected structural gizmos, how they work, and how they can enhance structural education for architects.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	41e5
authors	Abendroth, M., Decock, J. and Mestaoui, N.
year	2000
title	O_1:// the hypertextu(r)al matrix
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 75-76
summary	Founded in 1995 LAB[au], laboratory for architecture and urbanism, links theoretic research LAB[a+u] to concrete works of conception and realisations LA.BAU. LAB[au] elaborates a “hyperdesign” investigating the implications of new technologies of communication and computation in spatiotemporal and social processes and their forms of representation as architecture and urbanism. The transposition of the hypertext model to architectural and urban concepts question the mutation of the spatial and semantic construct of space. The definition of architecture as a code is based on “glocal” systems according to the processes of computation and communication.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	f08d
authors	Abrahamson, S., Wallace, D., Senin, N. and Sferro, P.
year	2000
title	Integrated design in a service marketplace
source	Computer-Aided Design, Vol. 32 (2) (2000) pp. 97-107
summary	This paper presents a service marketplace vision for enterprise-wide integrated design modeling. In this environment, expert participants and product developmentorganizations are empowered to publish their geometric design, CAE, manufacturing, or marketing capabilities as live services that are operable over the Internet. Theseservices are made available through a service marketplace. Product developers, small or large, can subscribe to and flexibly inter-relate these services to embody adistributed product development organization, while simultaneously creating system models that allow the prediction and analysis of integrated product performance. It ishypothesized that product development services will become commodities, much like many component-level products are today. It will be possible to rapidly interchangeequivalent design service providers so that the development of the product and the definition of the product development organization become part of the same process.Computer-aided design tools will evolve to facilitate the publishing of live design services. A research prototype system called DOME is used to illustrate the concept and apilot study with Ford Motor Company is used in a preliminary assessment of the vision.
keywords	Integrated Modeling, System Modeling, Design Service Marketplace
series	journal paper
email
last changed	2003/05/15 21:33

_id	eb8a
authors	Achten, H., De Vries, B. and Jessurun, J.
year	2000
title	DDDOOLZ. A Virtual Reality Sketch Tool for Early Design
doi	https://doi.org/10.52842/conf.caadria.2000.451
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 451-460
summary	This paper presents DDDoolz, a desktop-VR three-dimensional voxel sketchtool. DDDoolz is developed in the Design Systems Group to explore the use of Virtual Reality technology in the early design stage. The aim is to offer a sketch-like environment in VR with an unobtrusive interface. The paper presents DDDoolz, how it is used in education and with partners in architectural practice, and some future developments.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	fa3e
id	fa3e
authors	Achten, H., de Vries, B. and van Leeuwen, J.
year	2001
title	THE VR-DIS RESEARCH PROGRAMME
source	Achten, H.H., de Vries, B. and Hennessey, J. (eds). Design Research in the Netherlands 2000, 155-163
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2000_AchtenDeVriesVanLeeuwen.pdf
last changed	2005/10/12 15:41

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	1dfa
id	1dfa
authors	Achten, H.H., de Vries, B. and Hennessey, J. (eds.)
year	2001
title	DESIGN RESEARCH IN THE NETHERLANDS 2000 - PROCEEDINGS OF THE SYMPOSIUM, EINDHOVEN MAY 25-26 2000
source	Eindhoven: Eindhoven University of Technology
series	book
type	symposium
email
more	http://www.designresearch.nl/PDF/DRN2000_AchtenDeVriesHennessey_Proceedings.pdf
last changed	2005/10/12 15:28

_id	f3a9
id	f3a9
authors	Achten, H.H., de Vries, B. and Hennessey, J.
year	2001
title	DESIGN RESEARCH IN THE NETHERLANDS 2000
source	Achten, H.H., de Vries, B. and Hennessey, J. (eds). Design Research in the Netherlands 2000, i-vi
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2000_AchtenDeVriesHennessey_Introduction.pdf
last changed	2005/10/12 15:42

_id	ddssar0001
id	ddssar0001
authors	Achten, Henri and Leeuwen, Jos van
year	2000
title	Towards generic representations of designs formalised as features
source	Timmermans, Harry (Ed.), Fifth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Nijkerk, the Netherlands)
summary	Feature-Based Modelling (FBM) is an information modelling technique that allows the formalisation of design concepts and using these formal definitions in design modelling. The dynamic nature of design and design information calls for a specialised approach to FBM that takes into account flexibility and extensibility of Feature Models of designs. Research work in Eindhoven has led to a FBM framework and implementation that can be used to support design.. Feature models of a design process has demonstrated the feasibility of using this information modelling technique. To develop the work on FBM in design, three tracks are initiated: Feature model descriptions of design processes, automated generic representation recognition in graphic representations, and Feature models of generic representations. The paper shows the status of the work in the first two tracks, and present the results of the research work.
series	DDSS
last changed	2003/11/21 15:15

_id	9d26
authors	Adriane Borda Da Silva, A., Félix, N.R., Magallón Lacarta, J.A., Serón Arbeloa, F.J.
year	2000
title	Da Representação à Modelagem (From Representation Towards Modeling)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 280-282
summary	This work intends to structure a conceptual and technical referential to guide the development of the “Post-Graduate Drawing Course - from traditional tracing to computer graphics” (DTGC-IFM,UFPel, RS, Brasil), related to the process of using the computer technology for problem-solving in graphics representation. The referential intends to evaluate the level of development, and also orientate the investments with qualification of the staff, hardware and software. This study refers only to the process of solving problems using computer graphics techniques for Geometric and Visual Modeling.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ae61
authors	Af Klercker, Jonas
year	1999
title	CAAD - Integrated with the First Steps into Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.266
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 266-272
summary	How and when should CAAD be introduced in the curriculum of the School of Architecture? This paper begins with some arguments for starting CAAD education at the very beginning. At the School of Architecture in Lund teachers in the first year courses have tried to integrate CAAD with the introduction to architectural concepts and techniques. Traditionally the first year is divided by several subjects running courses separatly without any contact for coordination. From the academic year 96/97 the teachers of Aplied aestetics, Building Science, Architectural design and CAAD have decided to colaborate as much as possible to make the role of our different fields as clear as possible to the students. Therefore integrating CAAD was a natural step in the academic year 98/99. The computer techniques were taught one step in advance so that the students can practise their understanding of the programs in their tasks in the other subjects. The results were surprisingly good! The students have quickly learned to mix the manual and computer techniques to make expressive and interesting visual presentations of their ideas. Some students with antipaty to computers have overcome this handicap. Some interesting observations are discussed.
keywords	Curriculum, First Year Studies, Integration, CAAD, Modelling
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: