Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2024

Reformat results as: short short into frame detailed detailed into frame

_id	963d
authors	Moreau, Karen A. and Back, W. Edward
year	2000
title	Improving the design process with information management
source	Automation in Construction 10 (1) (2000) pp. 127-140
summary	This paper presents a method to quantify the time and cost impacts on Engineer, Procure, and Construct (EPC) projects resulting from information management driven process changes to the design process. Many engineering and construction companies have implemented information technologies and other changes, fully expecting to save time and cost, gain competitive advantage, improve productivity, better align project objectives, and improve product quality. Previous efforts to quantify benefits have been function or technology specific. The method described herein illustrates the value of evaluating process improvement strategies at the project level to avoid misleading conclusions regarding the actual benefit of investments. The research results strongly suggest that information management strategies applied to the design process may substantially improve total project performance.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	f8a3
authors	Tuzmen, Ayca
year	2000
title	Collaborative Building Design
doi	https://doi.org/10.52842/conf.ecaade.2000.093
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 93-99
summary	Studies on team performance have observed that some teams at the same stage in their development perform better than other teams, even of the same composition. Why is this? One of the main reasons is found to be a good team process. Researchers argue that collaborative process is an ideal case through which parties who see different aspects of a problem can constructively explore their differences and search for solutions that go beyond their own limited vision of what is possible. Much attention is now being paid to improvement of the design team process by establishing a collaborative environment in building design practice. Many scholars have prescribed various techniques and technology as ways of achieving collaboration in building design practice. A combination of these prescriptions does support design teams by facilitating one or more of the following: (a) team internal communication, (b) team external communication, (c) information sharing, and (d) decision making. Only recently have there been studies that have provided the strategies for integrating these techniques and technology for the establishment of a collaborative work environment. Researchers from various areas of research have this intention. This includes studies in Business Process Management (BPM), Business Process Re-Engineering (BPR), Total Quality Management (TQM), Project Management (PM), Workflow Management (WfM). All of these studies share one common feature. They all contribute to the study of the management of the team process. Despite the power of the concept and the history of successful application of process management techniques in building practice, the process management strategies are not a panacea. Rather it is a tool which, when properly used under appropriate circumstances, can aid design teams in the achievement of a collaborative design environment. The successful implementation or enactment of process management strategies in building design practice requires a mediator, a facilitator, or a project manager with a variety of managerial skills. However, it is not only enough to support major facilitators in the implementation or in the enactment of a design process that is planned for that teamwork. The performance of a design process should not only be depended on the skills or capabilities of tools that managers use to enact design processes. In order to achieve a collaborative design environment, members of the design team should also be given the support for monitoring and implementing of a collaborative design process. Team members should also have the ability to define, implement and track their personal subprocesses. Team members should also be able to monitor the process and be able to resolve the conflicts between their actions and other members' actions. A distributed process management environment is required in order to facilitate the management and control of the enactment of a collaborative design process. Such an environment should enable the control and monitoring of the enactment of a process and the resources required for its enactment. This paper presents the conceptual model of a process management environment that is developed in order to establish such a process management environment. It also discusses the findings of a study that is conducted for the validation and verification of this conceptual model.
keywords	Collaborative Design, Process Management, Workflow Management
series	eCAADe
type	normal paper
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:58

_id	54f5
authors	Wakisaka, T. Furuya, N. Inoue, Y. and Shiokawa, T.
year	2000
title	Automated construction system for high-rise reinforced concrete buildings
source	Automation in Construction 9 (3) (2000) pp. 229-250
summary	An all-weather automated construction system has been developed to reduce the total cost of high-rise reinforced concrete building construction. It was applied for the first time ever to the construction of a 26-story reinforced concrete condominium project located in the Tokyo Metropolitan area in 1995. This system incorporates four major elements: (a) a synchronously climbing all-weather temporary roof; (b) a parallel material delivery system; (c) prefabrication and unification of construction materials; and (d) a material management system. It ensures good quality; improves working and environmental conditions; reduces the construction period, manpower, and waste; and improves overall productivity.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	ae61
authors	Af Klercker, Jonas
year	1999
title	CAAD - Integrated with the First Steps into Architecture
doi	https://doi.org/10.52842/conf.ecaade.1999.266
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 266-272
summary	How and when should CAAD be introduced in the curriculum of the School of Architecture? This paper begins with some arguments for starting CAAD education at the very beginning. At the School of Architecture in Lund teachers in the first year courses have tried to integrate CAAD with the introduction to architectural concepts and techniques. Traditionally the first year is divided by several subjects running courses separatly without any contact for coordination. From the academic year 96/97 the teachers of Aplied aestetics, Building Science, Architectural design and CAAD have decided to colaborate as much as possible to make the role of our different fields as clear as possible to the students. Therefore integrating CAAD was a natural step in the academic year 98/99. The computer techniques were taught one step in advance so that the students can practise their understanding of the programs in their tasks in the other subjects. The results were surprisingly good! The students have quickly learned to mix the manual and computer techniques to make expressive and interesting visual presentations of their ideas. Some students with antipaty to computers have overcome this handicap. Some interesting observations are discussed.
keywords	Curriculum, First Year Studies, Integration, CAAD, Modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	b0e7
authors	Ahmad Rafi, M.E. and Karboulonis, P.
year	2000
title	The Re-Convergence of Art and Science: A Vehicle for Creativity
doi	https://doi.org/10.52842/conf.caadria.2000.491
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 491-500
summary	Ever-increasing complexity in product design and the need to deliver a cost-effective solution that benefits from a dynamic approach requires the employment and adoption of innovative design methods which ensure that products are of the highest quality and meet or exceed customers' expectations. According to Bronowski (1976) science and art were originally two faces of the same human creativity. However, as civilisation advances and works became specialised, the dichotomy of science and art gradually became apparent. Hence scientists and artists were born, and began to develop work that was polar opposite. The sense of beauty itself became separated from science and was confined within the field of art. This dichotomy existed through mankind's efforts in advancing civilisation to its present state. This paper briefly examines the relationship between art and science through the ages and discusses their relatively recent re-convergence. Based on this hypothesis, this paper studies the current state of the convergence between arts and sciences and examines the current relationship between the two by considering real world applications and products. The study of such products and their successes and impact they had in the marketplace due to their designs and aesthetics rather than their advanced technology that had partially failed them appears to support this argument. This text further argues that a re-convergence between art and science is currently occurring and highlights the need for accelerating this process. It is suggested that re-convergence is a result of new technologies which are adopted by practitioners that include effective visualisation and communication of ideas and concepts. Such elements are widely found today in multimedia and Virtual Environments (VEs) where such tools offer increased power and new abilities to both scientists and designers as both venture in each other's domains. This paper highlights the need for the employment of emerging computer based real-time interactive technologies that are expected to enhance the design process through real-time prototyping and visualisation, better decision-making, higher quality communication and collaboration, lessor error and reduced design cycles. Effective employment and adoption of innovative design methods that ensure products are delivered on time, and within budget, are of the highest quality and meet customer expectations are becoming of ever increasing importance. Such tools and concepts are outlined and their roles in the industries they currently serve are identified. Case studies from differing fields are also studied. It is also suggested that Virtual Reality interfaces should be used and given access to Computer Aided Design (CAD) model information and data so that users may interrogate virtual models for additional information and functionality. Adoption and appliance of such integrated technologies over the Internet and their relevance to electronic commerce is also discussed. Finally, emerging software and hardware technologies are outlined and case studies from the architecture, electronic games, and retail industries among others are discussed, the benefits are subsequently put forward to support the argument. The requirements for adopting such technologies in financial, skills required and process management terms are also considered and outlined.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	bb5f
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	Creating a City Administration System (CAS) using Virtual Reality in an Immersive Collaborative Environment (ICE)
doi	https://doi.org/10.52842/conf.ecaade.2001.449
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 449-453
summary	Current problems in administration of a city are found to be decentralized and noninteractive for an effective city management. This usually will result in inconsistencies of decision-making, inefficient services and slow response to a particular action. City administration often spends more money, time and human resource because of these problems. This research demonstrates our research and development of creating a City Administration System (CAS) to solve the problems stated above. The task of the system is to use information, multimedia and graphical technologies to form a database in which the city administrators can monitor, understand and manage an entire city from a central location. The key technology behind the success of the overall system uses virtual reality and immersive collaborative environment (ICE). This system employs emerging computer based real-time interactive technologies that are expected to ensure effective decisionmaking process, improved communication, and collaboration, error reduction, (Rafi and Karboulonis, 2000) between multi disciplinary users and approaches. This multi perspective approach allows planners, engineers, urban designers, architects, local authorities, environmentalists and general public to search, understand, process and anticipate the impact of a particular situation in the new city. It is hoped that the CAS will benefit city administrators to give them a tool that gives them the ability to understand, plan, and manage the business of running the city.
keywords	City Administration System (CAS), Virtual Reality, Immersive Collaborative Environment (ICE), Database
series	eCAADe
email
last changed	2022/06/07 07:54

_id	449f
authors	Aish, Robert
year	2000
title	Collaborative Design using Long Transactions and "Change Merge"
doi	https://doi.org/10.52842/conf.ecaade.2000.107
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 107-111
summary	If our goal is implement collaborative engineering across temporal, spatial and discipline dimensions, then it is suggested that we first have to address the necessary pre-requisites, which include both the deployment of "enterprise computing" and an understanding of the computing concepts on which such enterprise systems are based. This paper will consider the following computing concepts and the related concepts in the world of design computing, and discuss how these concepts have been realised in Bentley SystemsÕ ProjectBank collaborative engineering data repository: Computing Concept Related Design Concept Normalisation Model v. Report (or Drawing) Transaction Consistency of Design Long Transaction Parallelisation of Design Change Merge Coordination (synchronisation) Revisions Coordination (synchronisation) While we are most probably familiar with the applications of existing datadase concepts (such as Normalisation and Transaction Management) to the design process, the intent of this paper to focus
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	sigradi2004_027
id	sigradi2004_027
authors	Alfredo Stipech
year	2004
title	Enseñanza de la representación manual y digital, para arquitectos y diseñadores [Teaching Hand and Digital Representation to Architects and Designers]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	The supremacy of the digital means of representation and communication and the resulting shift of the manual means in the field of design and architecture, have engendered multiple opinions and literature. They focus and analyze the virtues and risks, the losses and substitutions, and the different expressive, productive and conceptual results of their leading role in the creative process. Furthermore, if we consider both as two extremes, apparently opposed, a broad panorama of combinations and additions are produced by the emerging group of hybrid practices. This motivated the development of a research project in the Universidad Nacional del Litoral de Santa Fe, Argentina, under the Program CAI+D 2000 dealing with Design and the Analog – Digital Means. From this project emerged a collection of conceptual speculations and experimentations in the extended field of representation, extended by the incorporation of new means and hybridations, searching for new parameters and methods for professional training and practice. Key words: analog, digital, graphics, means, representation.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

_id	dfaf
authors	Ataman, Osman
year	2000
title	Some Experimental Results in the Assessment of Architectural Media
doi	https://doi.org/10.52842/conf.acadia.2000.163
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 163-171
summary	The relationship between the media and architectural design can be an important factor and can influence the design outcome. However, the nature, direction and magnitude of this relationship are unknown. Consequently, there have been many speculative claims about this relationship and almost none of them are supported with empirical research studies. In order to investigate these claims and to provide a testable framework for their potential contributions to architectural education, this study aims to explore the effects of media on architectural design. During 1995-1997, a total of 90 students enrolling in First Year Design Studio and Introduction to Computing classes at Georgia Tech participated in the study. A set of quantitative measures was developed to assess the differences between the two media and the effects on the architectural design. The results suggested that media influenced certain aspects of students’ designs. It is concluded that there is a strong relationship between the media and architectural design. The type of media not only changes some quantifiable design parameters but also affects the quality of design.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	3f35
authors	Bermudez, Julio and King, Kevin
year	2000
title	Media interaction and design process: establishing a knowledge base
source	Automation in Construction 9 (1) (2000) pp. 37-56
summary	Integrating computers in architectural design means to negotiate between centuries-old analog design methods and the new digital systems of production. Analog systems of architectural production use tracing paper, vellum, graphite and ink, clipboard, clay, balsa wood, plastic, metal, etc. Analog systems have also been termed "handmade", "manual", "material" or "physical". Digital systems of architectural production use scanning, image manipulation, visualization, solid modeling, computer aided drafting, animation, rendering, etc. Digital systems have also been called "electronic", "computer-aided", "virtual", etc. The difficulty lies in the underdeveloped state of the necessary methods, techniques, and theories to relate traditional and new media. Recent investigations on the use of multiple iterations between manual and electronic systems to advance architectural work show promising results. However, these experiments have not been sufficiently codified, cross-referenced and third party tested to conform a reliable knowledge base. This paper addresses this shortcoming by bringing together reported experiences from diverse researchers over the past decade. This summary is informed by more than three years of continuous investigation in the impacts of analog-digital conversations in the design process. The goal is to establish a state-of-the-art common foundation that permits instructors, researchers and practitioners to refer to, utilize, test, criticize and develop. An appendix is included providing support for the paper's arguments.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	e894
authors	Blanco, Constanza
year	2000
title	Un proyecto de gestión. La digitalizacion de los edificios escolares del Gobierno Autonomo de la Ciudad de Buenos Aires. (A management project. The Digitalization of School Buildings of the Autonomous Government of the City of Buenos Aires)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 185-187
summary	The operation target, of digital school building plans recording, in the area of the Education Secretary of Buenos Aires City, is to survey, organize and create the connectivity into a single database, for a great number of graphic and non graphic documents. The information stocked in vellum, paper, and blueprints, on different scales and formats, has been collected, classified and checked. A skillful cad operator staff, in a prolific environment generated by codes, rules and helped by several particular tools which include macros, routines and libraries, is doing the production of drawings. All the documents and their parent information, from any kind of source, establish the core of an important database. The new information scope has the flexibility and accessibility required for a permanent data updating and extension.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	4cc0
authors	Bouchlaghem, N., Khosowshahi, F. and White, J.
year	2000
title	Virtual reality as a visualisation tool: Benefits and constraints
source	CIDAC, Volume 2 Issue 4 November 2000 pp. 216-224
summary	The benefits and applications of virtual reality (VR) in the construction industry have been investigated for almost a decade. However, the practical implementation of VR in the construction industry has yet to reach maturity owing to technical constraints. The need for effective information management presents challenges: both transfer of building data to, and organisation of building information within, the virtual environment require consideration. This paper reviews the applications and benefits of VR in the built environment field and reports on a collaboration between Loughborough University and South Bank University to overcome constraints on the use of the overall VR model for whole lifecycle visualisation. The work at each research centre is concerned with an aspect of information management within VR applications for the built environment, and both data transfer and internal data organisation have been investigated. In this paper, similarities and differences between computer-aided design (CAD) and VR packages are first discussed. Three different approaches to the creation of VR models during the design stage are identified and described, with a view to providing sharing understanding across the interdiscipliary groups involved. The suitable organisation of building information within the virtual environment is then further investigated. This work focused on the visualisation of the degradation of a building, through its lifespan, with the view to provide a visual aid for developing an effective and economic project maintenance programme. Finally consideration is given to the potential of emerging standards to facilitate an integrated use of VR. The convergence towards similar data structures in VR and other construction packages may enable visualisation to be better utilised in the overall lifecycle model.
keywords	Virtual Reality, Information Management, Data Exchange, 3D Modelling, 4D Visualisation
series	journal paper
last changed	2003/05/15 21:23

_id	cef3
authors	Bridges, Alan H.
year	1992
title	Computing and Problem Based Learning at Delft University of Technology Faculty of Architecture
doi	https://doi.org/10.52842/conf.ecaade.1992.289
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 289-294
summary	Delft University of Technology, founded in 1842, is the oldest and largest technical university in the Netherlands. It provides education for more than 13,000 students in fifteen main subject areas. The Faculty of Architecture, Housing, Urban Design and Planning is one of the largest faculties of the DUT with some 2000 students and over 500 staff members. The course of study takes four academic years: a first year (Propaedeuse) and a further three years (Doctoraal) leading to the "ingenieur" qualification. The basic course material is delivered in the first two years and is taken by all students. The third and fourth years consist of a smaller number of compulsory subjects in each of the department's specialist areas together with a wide range of option choices. The five main subject areas the students may choose from for their specialisation are Architecture, Building and Project Management, Building Technology, Urban Design and Planning, and Housing. The curriculum of the Faculty has been radically revised over the last two years and is now based on the concept of "Problem-Based Learning". The subject matter taught is divided thematically into specific issues that are taught in six week blocks. The vehicles for these blocks are specially selected and adapted case studies prepared by teams of staff members. These provide a focus for integrating specialist subjects around a studio based design theme. In the case of second year this studio is largely computer-based: many drawings are produced by computer and several specially written computer applications are used in association with the specialist inputs. This paper describes the "block structure" used in second year, giving examples of the special computer programs used, but also raises a number of broader educational issues. Introduction of the block system arose as a method of curriculum integration in response to difficulties emerging from the independent functioning of strong discipline areas in the traditional work groups. The need for a greater level of selfdirected learning was recognised as opposed to the "passive information model" of student learning in which the students are seen as empty vessels to be filled with knowledge - which they are then usually unable to apply in design related contexts in the studio. Furthermore, the value of electives had been questioned: whilst enabling some diversity of choice, they may also be seen as diverting attention and resources from the real problems of teaching architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	f2ff
id	f2ff
authors	Calderon, C., van Schaik, P., and Hobbs, B
year	2000
title	IS VR AN EFFECTIVE COMMUNICATION MEDIUM FOR BUILDING DESIGN?
source	Proceedings. Virtual Reality International Conferences 2000, Laval, France 18-21 May 2000 (pp 46-55)
summary	This paper is concerned with the effectiveness of the use of Virtual Reality (VR) to inform the early design stages of construction projects. The investigation has developed a new experimental methodology for assessing building designs and an enabling tool “ASSET”. A first VR model of a building has been produced as a vehicle for evaluating the methodology and ASSET and, incidentally, influencing the design of the building. An experi-ment has been completed to assess if design constraints have been fulfilled.
keywords	Building Design, Communication, Users, VR Technologies
series	other
type	normal paper
email
last changed	2005/12/02 11:02

_id	dcfe
id	dcfe
authors	Calderon, C., van Schaik, P., and Hobbs, B
year	2000
title	HOW TO EVALUATE VR APPLICATIONS PROCEEDINGS. .
source	VSMM 2000, Gifu, Japan, 4th- 6th October 2000
summary	This paper is concerned with the evaluation of VR applications using the construction domain as an example. The investigation has developed a new experimental methodology and an enabling tool “ASSET to (1)determine the effectiveness of different representations of buildings –2D drawings and 3D Real-Time models- and to (2) assess the solutions proposed by the design team –architects and engineers. A first VR model of a building has been produced as a vehicle for evaluating the methodology and AS-SET. A first cycle of the research has been completed; the first experiment has been carried out, the data has been collected and analysed and, the results have been produced
keywords	Building Design, Communication, Users, VR Technologies
series	other
type	normal paper
email
last changed	2005/12/02 11:13

_id	db71
authors	Chien, S.-F. and Shih, S.-G.
year	2000
title	A Web Environment to Support User Participation in the Development of Apartment Buildings
source	Special Focus Symposium on WWW as the Framework for Collaboration, InterSymp 2000, July 31-August 5, Baden-Baden, Germany, pp. 225-231
summary	In Taiwan, apartments are sold before ever been built. Apartment buyers can customize their units until the construction takes place. This customization process has become a very unique form of user participation in the development of apartment buildings in Taiwan. However, in all customizations, large amount of information has to be documented and exchanged between related agencies for each apartment unit. For an apartment building that contains over 40 units, managing the information can be a daunting task. We are developing a web environment to support the customization process and enable efficient management and timely exchanges of information. The environment provides three levels of design interaction to encourage user participation in a controlled customization process. This paper describes the framework of this web environment, illustrates its functionality through a running prototype, and discusses technical issues encountered during its implementation.
series	other
last changed	2003/04/23 15:50

_id	ga0025
id	ga0025
authors	Chiodi , Andrea and Vernillo, Marco M.
year	2000
title	Deep Architectures and Exterior Communication in Generative Art
source	International Conference on Generative Art
summary	Human beings formulate their thoughts through their own language. To use a sentence by Ezra Pound: “The thought hinges on word definition.” Software beings formulate their thoughts through data structures. Not through a specific expressive means, but directly through concepts and relations. Human beings formulate their thoughts in a context, which does not require any further translation. If software beings want to be appreciated by human beings, they are forced to translate their thoughts in one of the languages the human beings are able to understand. On the contrary, when a software being communicates with another software being, this unnatural translation is not justified: communication takes place directly through data structures, made uniform by opportune communication protocols. The Generative Art prospect gives the software beings the opportunity to create works according to their own nature. But, if the result of such a creation must be expressed in a language human beings are able to comprehend, then this result is a sort of circus performance and not a free thought. Let’s give software beings the dignity they deserve and therefore allow them to express themselves according to their own nature: by data structures. This work studies in depth the opportunity to divide the software ‘thought’ communication from its translation in a human language. The recent introduction of XML leads to formal languages definition oriented to data structure representation. Intrinsically data and program, XML allows, through subsequent executions and validations, the realization of typical contextual grammars descriptions, allowing the management of high complexities. The translation from a data structure into a human language can take place later on and be oriented to different alternative kind of expression: lexical (according to national languages), graphical, musical, plastic. The direct expression of data structures promises further communication opportunities also for human beings. One of these is the definition of a non-national language, as free as possible from lexical ambiguities, extremely precise. Another opportunity concerns the possibility to express concepts usually hidden by their own representation. A Roman bridge, the adagio “Music for strings, celesta and drums” by Bartok and Kafka’s short novel “In the gallery” have something in common; a work of Generative Art, first expressed in terms of structure and then translated into an architectural, musical, or literary work can express this explicit community.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	d0aa
authors	Colajanni, Benedetto, Concialdi, Salvatore and Pellitteri, Giuseppe
year	1999
title	CoCoMa: a Collaborative Constraint Management System for the Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.1999.364
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 364-369
summary	Collaborative Design is a topic of particular current interest. Existing software allows a multiplicity of designers to work on the same project. What the software really allows is accessing to a part of the information of the project and changing it. Sometimes there is a hierarchical distribution of the power of change: some participants can be permitted to operate only on some limited layers of the object representation. In this case the changes they propose are to be accepted by a general manager of the design process. What is lacking in this kind of software is the explicit management on the reciprocal constraints posed by different participants. In this paper, an elementary Collaborative Design System is presented whose main concern is just the management of constraints. Each participant designs the part of the project of his/her concern instantiating objects comprised of geometric description, alphanumeric variables and constraints on both. Constraints can be of two types: absolute or defined by a range of allowed values of the constrained variable. A participant intervening later can accept the constraint, choosing a value in the permitted range, or decide to violate it. In this case the proposed violation is signalled to whom posed it.
keywords	Collaborative Design, Design Process, Management System, Participant Designs, Constraints Violation
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: