Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 776

Reformat results as: short short into frame detailed detailed into frame

_id	diss_ddssar0211
id	diss_ddssar0211
authors	Brandt, Eva
year	2001
title	Event driven product development – collaboration and learning
source	Dept. of Technology and Social Sciences, Technical University of Denmark
summary	This dissertation is the result of the research project “Event-Driven Product Development: Collaboration and Learning”. It is an industrial Ph.D. project carried out in collaboration between the company Danfoss A/S, and the Institute of Technology and Social Sciences at the Technical University of Denmark; now the Department of Manufacturing Engineering and Management. The research was funded partly by Danfoss A/S and partly by the Danish Academy of Technical Sciences (ATV), who have named the project EF 609. The research project began in February 1996. I have had three supervisors: Thomas Binder and Jacob Buur both of whom represent Danfoss, and Lauge Baungaard Rasmussen from the Institute of Technology and Social Sciences at the Technical University of Denmark.
series	thesis:PhD
email
more	http://space.interactiveinstitute.se/staff/Eva.Brandt/phd.html
last changed	2003/12/15 14:31

_id	a58e
authors	Evans, S. and Hudson-Smith, A.
year	2001
title	Information Rich 3D Computer Modeling of Urban Environments
source	Working Paper 35, Centre for Advanced Spatial Analysis Working Papers; London, August 2001
summary	We are living in an increasingly information rich society. Geographical Information Systems now allow us to precisely tag information to specific features, objects and locations. The Internet is enabling much of this information to be accessed by a whole spectrum of users. At CASA we are attempting to push this technology towards a three-dimensional GIS, that works across the Internet and can represent significant chunks of a large city. We believe that the range of possible uses for such technology is diverse, although we feel that urban planning is an area that can benefit greatly. An opportunity to push this ìplanning technologyî arose when CASA won a tender from Hackney Council to develop a dynamic website for community participation in the process of regenerating the Woodberry Down Estate. This is a run down part of northeast London that is undergoing a major redevelopment. CASA has developed a system that not only informs the local residents about the redevelopment process but it also enables them to use dynamic visualisations of the ìbefore and after effectsî of different plans, and then to discuss and vote on the variety of options.
series	other
last changed	2003/04/23 15:50

_id	668b
authors	Heylighen, Ann
year	2001
title	End, means and method - Three roles of design(ing) technology in design research
source	Digital Creativity, Volume 12, No. 2, 2001 (ISSN 1462-6268), pp. 103-105
summary	This article explores an approach to design research in which the development of design technology plays a key role. It presents the author's Ph.D. research on the role of cases in architectural design. The research aimed at investigating the applicability of Case-Based Design (CBD) to the domain of architecture. To this end, the author adopted and confronted different stakeholder perspectives, one of which is that of CBD technology developer. By consequence, a considerable part of the research covers the design, implementation and evaluation of a CBD tool to support architects/designers. The research did not have a strictly instrumental aim, but wanted to provide insights for the field of architectural design on both a theoretical and a technological level. While the tool itself aimed at providing architects with valuable design support, making the tool was used as a method to develop a better understanding of current CBD technology. Moreover, the resulting tool turned out to be an effective means to examine the role and impact of cases in architectural design. Rather than reporting on the outcome of the research, the main objective of the article is to make a methodological reflection on the possibilities and limitations of this approach.
keywords	Design Research, Architectural Design, CAAD, Case-Based Design
series	journal paper
email
last changed	2002/11/14 08:38

_id	avocaad_2001_07
id	avocaad_2001_07
authors	Stefan Wrona, Adam Gorczyca
year	2001
title	Complexity in Architecture - How CAAD can be involved to Deal with it. - "Duality"
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	“Complexity “ is for us a very ambigous notion. It may be understood in two contexts.1.Thorough solution of a problem.Complexity means full recognition of design area, followed by appropriate work. That work must be thorough and interdisciplinary – if necessary, separated to different co-operatives. These trade designers reqiure a branch coordination and – the most important- all of them must have a „common denominator”. Such as a proper CAAD platform and office standards. That will reduce costs of changes, improve an interplay between designers and somtimes enable to face up a new challenge.Nowadays architects are no longer “solitary” individualists working alone – they must concern a team – they become a member, a part of a huge design machine. “Import/export”, compatibility, interplay – these words must appear and we have to put a stress on them. How to organize work for different trade-designers? How to join in common database architectural design ,engineering design, HVAC design, electricity design, technology design, computer network design and all other trades ?...A key to solve this range of problems is in good work organization. Universal prescription does not exist, but some evergreen rules can be observed. We are going to present a scheme of work in CAAD application ALLPLAN FT v.16 with a Group manager , which starts to conquest polish market and is widely spread in Germany. “Golden rules” of ALLPLAN FT There is one database – it is placed on server. It includes all projects. There is a well-developed office standard. It must be created at the beginning of collaboration, although it is possible to improve it later. It consist of hatches, fonts, symbols, macros, materials, pen-widths, and – the most important –layers . A layer set – predefined structure divided into functional groups – e.g. drafting, text, dimensioning, architecture, HVAC, engineering, urban design, etc.That stucture is a part of an office standard – all workers use a relevant part of it. No name duplicates, no misunderstandings... If however design extends, and a new group of layers is required, it can be easily added, e.g. computer networks, fireguard systems. Administrator of ALLPLAN network defines different users and gives them different permitions of access. For example – an electrician will be able to draft on layer “electricity”, but he won’t modify anything at layer “architecture – walls”, and he won’t even see a layer “engineering- slabs”, because he doesn’t need it..At the same time our electrician will be able to see , how architect moves some walls and how HVAC moved and started to cross with his wires. Every user is able to see relevant changes, after they are saved by author. Two different users can not access at the same time the same file. That excludes inconsistent or overlapping changes . All users operate on a 3D model. While putting some data into a model, they must remember about a “Z” coordinate at work-storey. But at the same time all create a fully-integrated, synchronous database, which can be used later for bills of quantities, specifications, and – of course – for visuaisation. That method can be described as “model-centric”. To simplify complex structure of architectural object -ALLPLAN offers files. Usually one file means one storey, but at special designs it might become a functional part of a storey, or whatever you wish. Files connected with layers easy enable to separate certain structural elements, e.g. if we want to glance only at concrete slabs and columns in the building – we will turn on all files with “layer filter” – “slabs” and “columns”. ALLPLAN is of course one of possible solutions. We described it , because we use it in our workshop. It seems to be stretchy enough to face up every demand and ever-increasing complexity of current projects. The essence of the matter, however, is not a name or version of application – it is a set of features, we mentioned above, which allows to deal with EVERY project. The number of solutions is infinite.2. Increasing difficulties during design process. It may be associated with more and more installations inside of new buildings, especially some “high-tech” examples. The number of these installations increases as well as their complexity. Now buildings are full of sensors, video-screens, computer networks, safety-guard systems... Difficulties are connected with some trends in contemporary architecture, for example an organic architecture, which conceives “morphed” shapes, “moving” surfaces, “soft” solids. This direction is specially supported by modelling or CAD applications. Sometimes it is good – they allow to realize all imaginations, but often they lead to produce “unbuildable” forms, which can exist only in virtual world.Obstacles appear, when we design huge cubatures with “dense” functional scheme. Multi-purposed objects, exhibition halls, olimpic stadium at Sydney – all of them have to be stretchy, even if it requires sliding thousands pound concrete blocks! Requirements were never so high.The last reason, why designs become so complex is obvious - intensifying changes due to specific requirements of clients/developers.We could say “ signum tempori” – everything gets more and more complicated , people have to become specialists, to face up new technology. But how CAAD can help us with it? How?! We have already answered that question. Sometimes CAAD is the only way to imagine and sketch something, to visualize something, to compute a construction , to prepare a simulation... So that human must “only” interprete ready solutions. Sometimes CAAD help us to notify a problem. It works exactly in the same way, as spy-glasses does. For example – without a real-time visualization we we would have never realised (until finished!) some strange interference of solids, which have occured in the upper roof part of our new appartment-house.ConclusionsTemporary CAAD is an integral part of design process – not only as a tool, but sometimes as an inspiration. It helps to organize our work, to define problems, to filter relevant elements and to render our visions. It becomes an integral part of our senses – and that will be a real complexity in architecture...
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	7f06
authors	Won, P.-H.
year	2001
title	The comparison between visual thinking using computer and conventional media in the concept generation stages of design
source	Automation in Construction 10 (3) (2001) pp. 319-325
summary	The computer, the new media, reaches out and influences the behavior of design as it does almost every facet of life. In recent years, much research into the development of computer-aided design has looked at the concept generation stage of the design process. Most of these applied studies have focused on the testing of computer systems. On the other hand, there are also many studies on the visual thinking and cognitive behavior of designers while sketching or drawing in the stage of concept generation. From the synthesis of the two aforementioned disciplines, we can find that there exists a point of deficiency. That is, the cognitive research about designers using computers as sketching media is absent. It is this area that is discussed in the current paper. The fundamental analytic data of this research is the visual process chronicled from the sketching of subjects. The analytic data is the verbal data from the questions that the subjects are asked after sketching. The data is analyzed using three coding schemes. The cognitive appearance while designers generating concepts with computers or conventional media are propounded and discussed in this research.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ga0132
id	ga0132
authors	Abe, Yoshiyuki
year	2001
title	Beyond the math visualization - Geometrica and Stochastica
source	International Conference on Generative Art
summary	Mathematically controlled imaging process provides attractive results because of its infinite scaling capabilities with some other elements that contribute to the visualization. Its global/local and precise manipulation of parameters holds potential for realizing an unpredictable horizon of imagery. When it meets the artist's taste, this method could be a strong enough system of creation, and I have been producing images using the surfaces of hyperbolic paraboloid. On the other hand, a method absolutely free from the geometric parameter manipulation is possible with a stochastic process [1]. Like the technique of pendulum in photography, while its production rate of acceptable result is very low, its potential of generating a strong visual message is also very attractive. It is possible to set stochastic elements at any stage of the process, and conditional probability on those elements, or the hierarchy of probability management characterizes the probability distribution. Math space has no light. No gravity. No color on the math surfaces. And the math equation providesonly the boundary in 3D or higher mathematical dimensions. The fact means that artists can keep artistic reality with their unique tastes in colors on the surface and light sources, and this is the most important element of the math based imaging. Being able to give artists' own choice of colors and that the artist may take only right ones from the results of a stochastic process guarantee the motif and aesthetics of artist could be reflected onto the work.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	fa3e
id	fa3e
authors	Achten, H., de Vries, B. and van Leeuwen, J.
year	2001
title	THE VR-DIS RESEARCH PROGRAMME
source	Achten, H.H., de Vries, B. and Hennessey, J. (eds). Design Research in the Netherlands 2000, 155-163
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2000_AchtenDeVriesVanLeeuwen.pdf
last changed	2005/10/12 15:41

_id	1dfa
id	1dfa
authors	Achten, H.H., de Vries, B. and Hennessey, J. (eds.)
year	2001
title	DESIGN RESEARCH IN THE NETHERLANDS 2000 - PROCEEDINGS OF THE SYMPOSIUM, EINDHOVEN MAY 25-26 2000
source	Eindhoven: Eindhoven University of Technology
series	book
type	symposium
email
more	http://www.designresearch.nl/PDF/DRN2000_AchtenDeVriesHennessey_Proceedings.pdf
last changed	2005/10/12 15:28

_id	f3a9
id	f3a9
authors	Achten, H.H., de Vries, B. and Hennessey, J.
year	2001
title	DESIGN RESEARCH IN THE NETHERLANDS 2000
source	Achten, H.H., de Vries, B. and Hennessey, J. (eds). Design Research in the Netherlands 2000, i-vi
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2000_AchtenDeVriesHennessey_Introduction.pdf
last changed	2005/10/12 15:42

_id	7897
authors	Achten, Henri and De Vries, Bauke
year	2001
title	Multiple Sketch Users in DDDoolz
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 153-162 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	This paper presents DDDoolz, a desktop-VR three-dimensional voxel sketchtool. DDDoolz is developed in the Design Systems Group to explore the use of Virtual Reality technology in the early design stage. The aim is to offer a sketch-like environment in VR with an unobtrusive interface. The paper presents DDDoolz, how it is used in education and with partners in architectural practice, and some future developments. As an extension to current functionality, the possibility of multiple users at the same time will be developed in the system for the {ACCOLADE} workshop.
series	other
email
last changed	2001/09/14 21:30

_id	7e52
authors	Achten, Henri
year	2001
title	Normative Positions in Architectural Design - Deriving and Applying Design Methods
doi	https://doi.org/10.52842/conf.ecaade.2001.263
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 263-268
summary	This paper presents a recently finished course of eight weeks where CAAD skills, design methodology, and architectural theory are combined to discuss possible perspectives on the use of the computer in design, and its influence on architecture. In the course, three contemporary architects were studied; Peter Eisenman, Ben van Berkel, and Greg Lynn. Each was discussed on aspects of ontology (which are the elements of discourse), design method (design process and organization of the process), and the use of the computer (techniques and approaches). These were linked with design theory, architectural theory, and CAD-theory. The reflection on the work of the architects resulted in a number of design methods for each architect. The design methods were adapted to the available technologies in the university as well as to the scope of the exercise, since the period of eight weeks for an exercise cannot compete with design processes in practice that take many participants and much time. The students then applied the design methods to a design task: student housing and an exhibition pavilion on the campus area of the university. The task was so devised, that students could focus on either architectural or urban design level with one of the design methods. Also, the choice of architects and accompanying design methods was made in such a way that students with low, medium, and advanced computer skills could take part in the course and exercise. In a workshop held at the Czech Technical University (CVUT) in Prague, the same procedure was used in a one-week period for a different design task, but in an otherwise almost identical setting with respect to the CAAD software used. The methods and material were easily transferred to the other setting. The students were able to cope with the task and produced surprising results in the short time span available. The paper will provide an overview of the course, discuss the pedagogical implications of the work, and discuss how this particular work can be generalized to incorporate other architects and approaches.
keywords	CAAD: Design Methods, Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:54

_id	28b9
authors	Achten, Henri
year	2001
title	Future Scenario for a Collaborative Design Session
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 163-168 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	A collaborative design project consists of a team of design partners who are engaged during the period of the project in a particular design task. The group forms a short-lived community with the goal to create a design. The environment in which this is done today, consists of the participants office spaces, completed with equipment such as drawing tables, coffee machines, fax machines, CAD stations, etc. None of these elements reflect the existence of the (temporary) community that a design partner participates in. In this workshop paper we propose that the current two-dimensional desktop metaphor in a computer does not adequately support collaborative design. The typical 2D-desktop multiple open windows with different applications gives a fractured view of the design project in which by contrast the designer as a person conceives of himself as a whole. Moreover, the sense of place, or a consistent identity in which the design takes place is also lacking. The notion of _virtual environmentsÑ can assist in further developing design support for collaborative design in the future, as is sketched in the following outline.
series	other
email
last changed	2001/09/14 21:30

_id	avocaad_2001_14
id	avocaad_2001_14
authors	Adam Jakimowicz
year	2001
title	Non-Linear Postrationalisation: Architectural Values Emergence in a Teamwork Interpretation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The paper presents the outcomes of the experiment being conducted at the Faculty of Architecture in Bialystok, which derives form three main sources: a new course of architectural composition by computer modelling, developed and conducted in Bialystok postrationalisation as a formulation platform for new architectural values and theories, applied by e.g. Bernard Tschumi the idea of new values emergence resulting form a teamwork, when placed in an appropriate environment; It is assumed that the work performed first intuitively, can be later seriously interpreted, and to some extent rationalised, verbalised, described. With no doubt we can state, that in creative parts of architectural activities, very often decision are taken intuitively (form design). So this ‘procedure’ of postrationalisation of intuitively undertaken efforts and results seems to be very important –when trying to explain ideas. This kind of activity is also very important during the first years of architectural education. In case of this experiment, the students’ works from the course of architectural composition are taken as a base and subjects for interpretation, and values research. However, when at first, individual works are being interpreted by their authors, at the latter stage, the teams are to be formed. The aim of the teamwork is to present individual works, analyse them, find common value(s), and represent it (them) in an appropriate, creative way. The ideal environment to perform this work is hypertext based internet, because the non-linearity of team interpretations is unavoidable. On the other hand, the digital input data (computer models) is a very appropriate initial material to be used for hypermedia development. The experiment is to analyse the specific of the following: the self-influence of the group on the individual work ‘qualification’, mutual influence of the team members on their own work interpretation, the influence of the digital non-linear environment on the final outcome definition. The added value of hypertext in architectural groupwork digital performance shall be examined and described. A new value of individualised, though group based, non-linearity of expression will be presented and concluded.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	db60
authors	Af Klercker, J., Achten, H. and Verbeke, J.
year	2001
title	AVOCAAD - A First Step Towards Distance Learning?
doi	https://doi.org/10.52842/conf.ecaade.2001.269
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 269-274
summary	In the industrial world knowledge is developed very fast. As most countries are depending on employees with a high level of knowledge and skills the term ”Life Long Learning” has been formulated and the concept is more and more accepted. Institutions of higher education are more and more involved in creating supplementary education more independent of time and place. Distance learning was originally carried out by ordinary mail, which was slow but might then have been the only solution for people in remote places. With the Internet and e-mail the distance-learning concept has got a far better tool, for instance better interaction facilities. Architects and engineers in practise are deeply involved in solving the problems of the present projects. Education which is independent of time and place must be of great interest to both parties. The AVOCAAD project has created an education model for students to meet the possibilities of CAAD. The education model can be used in a curriculum at a school as well as for distance learning. Among the possible experiences from it, the one concerning distance learning might be the most important future application of the system in architectural education. This paper sketches the pedagogical background and gives examples from other areas of knowledge, where distance learning is already in use. We will put the question how the AVOCAAD concept meets the experiences from distance learning.
keywords	Distance Learning, Pedagogic, CAAD, E-Learning, AVOCAAD
series	eCAADe
email
last changed	2022/06/07 07:54

_id	9c0c
authors	Af Klercker, Jonas and HenrichsÈn, Jan
year	2001
title	Can simulations in VE support architects in solving complex design problems?
source	Stellingwerff, Martijn and Verbeke, Johan (Eds.), ACCOLADE - Architecture, Collaboration, Design. Delft University Press (DUP Science) / ISBN 90-407-2216-1 / The Netherlands, pp. 77-82 [Book ordering info: m.c.stellingwerff@bk.tudelft.nl]
summary	Building design is facing development of industrialization of the production on the one hand and more complex 'One of a Kind' products on the other. This will be for rebuilding of a large stock of existing buildings and what can be left to new production. In both cases the results of the design process have to be solid to guarantee a successful product. In both cases an integrated and careful design process is absolutely crucial. The demands on the built environment make the systems of buildings more and more complex and have to be handled by a lot of different expertise. To avoid the 'Relay Race' of today the design teams of tomorrow must work much more integrated. To make integrated solutions, which means simultaneous constrains on all systems, the experts of different fields have to understand more of how all engaged systems relate and influence each other. Communication then consists of complex situations and processes that have to be understood and related to reality. In this aspect a multidimensional Virtual Environment interface has advantages and has been successfully used in design processes in other industries. In this paper the problems that have to be studied are for example Methodical, Conceptual, Technical and Process economical.
series	other
email
last changed	2001/09/14 21:30

_id	4b30
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	ARMY WAR GAME SIMULATION (AWAS) system - Utilising architectural knowledge in virtual environments
doi	https://doi.org/10.52842/conf.caadria.2001.435
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 435-438
summary	This research briefly examines the importance of collaborative design in developing a multi-user, multi-tiered, networked and real-time information base system. Aspects such as navigation, interaction, communication, movements (objects or virtual camera), control, level of details, spatial design and virtual spaces will be explained to show their importance in the development of virtual world. This paper will further explore the aspects of collaborative design in the context of Army War Game Simulation System (AWAS). A generic collaborative design-based framework will be demonstrated to simulate the overall operations of a war in command-control structure of the force.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	bb5f
authors	Ahmad Rafi, M.E. and Mohd Fazidin, J.
year	2001
title	Creating a City Administration System (CAS) using Virtual Reality in an Immersive Collaborative Environment (ICE)
doi	https://doi.org/10.52842/conf.ecaade.2001.449
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 449-453
summary	Current problems in administration of a city are found to be decentralized and noninteractive for an effective city management. This usually will result in inconsistencies of decision-making, inefficient services and slow response to a particular action. City administration often spends more money, time and human resource because of these problems. This research demonstrates our research and development of creating a City Administration System (CAS) to solve the problems stated above. The task of the system is to use information, multimedia and graphical technologies to form a database in which the city administrators can monitor, understand and manage an entire city from a central location. The key technology behind the success of the overall system uses virtual reality and immersive collaborative environment (ICE). This system employs emerging computer based real-time interactive technologies that are expected to ensure effective decisionmaking process, improved communication, and collaboration, error reduction, (Rafi and Karboulonis, 2000) between multi disciplinary users and approaches. This multi perspective approach allows planners, engineers, urban designers, architects, local authorities, environmentalists and general public to search, understand, process and anticipate the impact of a particular situation in the new city. It is hoped that the CAS will benefit city administrators to give them a tool that gives them the ability to understand, plan, and manage the business of running the city.
keywords	City Administration System (CAS), Virtual Reality, Immersive Collaborative Environment (ICE), Database
series	eCAADe
email
last changed	2022/06/07 07:54

_id	12e3
authors	Ahmad Rafi, M.E., Che Zulkhairi, A. and Karboulonis, P.
year	2002
title	Interactive Storytelling and Its Role in the Design Process
doi	https://doi.org/10.52842/conf.caadria.2002.151
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 151-158
summary	Projects of ever increasing complexity and size have incited the need for new and robust design methodologies and tools in an effort to manage complexity, lower costs, ascertain quality and reduce risk. Technology convergence through the growing availability of networked computers, rapid progress in Computer Aided Design (CAD) and information management have encouraged the undertaking of even more complex designs that demand high degrees of interaction, collaboration and the efficient sharing and dissemination of information. It is suggested that interactive storytelling and interactive design (Rafi and Karboulonis, 2001) techniques that use non-linear information mapping systems can be deployed to assist users as they navigate information that is structured to address localized needs as they arise. The design process is a collaborative effort that encompasses diverse knowledge disciplines and demands the management and utilization of available resources to satisfy the needs of a single or set of goals. It is thought that building industry specialists should work close together in an organised manner to solve design problems as they emerge and find alternatives when designs fall short. The design process involves the processing of dynamic and complex information, that can be anything from the amount of soil required to level lands - to the needs of specific lightings systems in operation theatres. Other important factors that affect the design process are related to costs and deadlines. This paper will demonstrate some of our early findings in several experiments to establish nonlinear storytelling. It will conclude with a recommendation for a plausible design of such a system based on experimental work that is currently being conducted and is reaching its final stages. The paper will lay the foundations of a possible path to implementation based on the concept of multi-path animation that is appropriate for structuring the design process as used in the building industry.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	c39a
authors	Ahumada Gallardo, N., López Morales, B., Mora Olate, M.L. and Muñoz, V.C.
year	2001
title	MARCO ANTONIO DE LA PARRA COMO NARRADOR Y ENSAYISTA. MONOGRAFIA MULTIMEDIAL (Marco Antonio de la Parra as Narrator and Writer. Monography in Multimedia)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 268-270
summary	The analysis of Marco Antonio de la Parra’s novels and essays from the discourse perspective, is the contents of an interdisciplinary work for modernizing and improving communicative possibilities of universitary thesis through multimedia. For the multimedia design, the main and most recent digital creating software for the graphic treatment of texts and images were analised, then the navigation system and screens were designed, difining backgrounds, texts, audio and video, besides buttons and hits. Results permit: 1. To present the contents in an easy access and transportation support, reducing production costs. 2. The offering of three communication supports: written text, audio and video. 3. Ostensibly improves universitary thesis and seminars quality.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: