Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1627

Reformat results as: short short into frame detailed detailed into frame

_id	b36d
authors	Lewis, Martin Lewis and Wojtowicz, Jerzy
year	2001
title	Design in the New Media - Digital Design Pedagogy at the SoA, University of British Columbia
doi	https://doi.org/10.52842/conf.ecaade.2001.256
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 256-261
summary	The idea of the Bauhaus education was born out of the conviction that designs for mass production and modern architecture needed a new fundamental design strategy. Today, seventy-five years later, the modern, basic design pedagogy needs to be revisited, as the impact of the Information Technology Revolution on design practice and education is now extensive. The illustrations and reflections on a modern curriculum for fundamental design and communication presented in this paper are derived from the authors’ introduction of the new media to design studios at UBC and from design practice. In the case of the nascent student of architecture, a different, rudimentary approach is required: one calling for the combining of the modern, basic design agenda with the introduction of the new media. The fundamental digital design pedagogy is young and not fully established. This is a considerable problem, since the practice and learning of architecture today is increasingly aided by and dependent upon digital media. Parallel to the traditional methods, the contemporary student of design is now obliged to engage new and dynamic conditions at the formative stage of his or her education. In the recent past, the computer was considered as just another device, requiring the development of mechanical techniques or skills. While those skills still have to be mastered, more recently in design education and practice, IT has become accepted as MEDIA - not just as a drafting or modeling tool. This process is perhaps due to the rapid dissemination of computing literacy and to the progressive accessibility and ease of use of IT. At UBC, Techniques and the Foundation Studio are introductory courses intended to make students engage the new media in parallel with, and complimentary to, established conventions in design.
keywords	Imagining, Communicating
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ga0132
id	ga0132
authors	Abe, Yoshiyuki
year	2001
title	Beyond the math visualization - Geometrica and Stochastica
source	International Conference on Generative Art
summary	Mathematically controlled imaging process provides attractive results because of its infinite scaling capabilities with some other elements that contribute to the visualization. Its global/local and precise manipulation of parameters holds potential for realizing an unpredictable horizon of imagery. When it meets the artist's taste, this method could be a strong enough system of creation, and I have been producing images using the surfaces of hyperbolic paraboloid. On the other hand, a method absolutely free from the geometric parameter manipulation is possible with a stochastic process [1]. Like the technique of pendulum in photography, while its production rate of acceptable result is very low, its potential of generating a strong visual message is also very attractive. It is possible to set stochastic elements at any stage of the process, and conditional probability on those elements, or the hierarchy of probability management characterizes the probability distribution. Math space has no light. No gravity. No color on the math surfaces. And the math equation providesonly the boundary in 3D or higher mathematical dimensions. The fact means that artists can keep artistic reality with their unique tastes in colors on the surface and light sources, and this is the most important element of the math based imaging. Being able to give artists' own choice of colors and that the artist may take only right ones from the results of a stochastic process guarantee the motif and aesthetics of artist could be reflected onto the work.
series	other
email
more	http://www.generativeart.com/
last changed	2003/11/21 15:15

_id	1b10
id	1b10
authors	Bay, Joo-Hwa
year	2001
title	Cognitive Biases - The case of tropical architecture
source	Delft University of Technology
summary	This dissertation investigates, i) How cognitive biases (or illusions) may lead to errors in design thinking, ii) Why architects use architectural precedents as heuristics despite such possible errors, and iii) Develops a design tool that can overcome this type of errors through the introduction of a rebuttal mechanism. The mechanism controls biases and improves accuracy in architectural thinking. // The research method applied is interdisciplinary. It employs knowledge from cognitive science, environmental engineering, and architectural theory. The case study approach is also used. The investigation is made in the case of tropical architecture. The investigation of architectural biases draws from work by A. Tversky and D. Kahneman in 1982 on “Heuristics and biases”. According to Tversky and Kahneman, the use of heuristics of representativeness (based on similarity) and availability (based on ease of recall and imaginability) for judgement of probability can result in cognitive biases of illusions of validity and biases due to imaginability respectively. This theory can be used analogically to understand how errors arise in the judgement of environmental behaviour anticipated from various spatial configurations, leading to designs with dysfunctional performances when built. Incomplete information, limited time, and human mental resources make design thinking in practice difficult and impossible to solve. It is not possible to analyse all possible alternative solutions, multiple contingencies, and multiple conflicting demands, as doing so will lead to combinatorial explosion. One of the ways to cope with the difficult design problem is to use precedents as heuristic devices, as shortcuts in design thinking, and at the risk of errors. This is done with analogical, pre-parametric, and qualitative means of thinking, without quantitative calculations. Heuristics can be efficient and reasonably effective, but may not always be good enough or even correct, because they can have associated cognitive biases that lead to errors. Several debiasing strategies are discussed, and one possibility is to introduce a rebuttal mechanism to refocus the designer’s thinking on the negative and opposite outcomes in his judgements, in order to debias these illusions. The research is carried out within the framework of design theory developed by the Design Knowledge System Research Centre, TUDelft. This strategy is tested with an experiment. The results show that the introduction of a rebuttal mechanism can debias and improve design judgements substantially in environmental control. The tool developed has possible applications in design practice and education, and in particular, in the designing of sustainable environments.
keywords	Design bias; Design knowledge; Design rebuttal; Design Precedent; Pre-parametric design; Tropical architecture; Sustainability
series	thesis:PhD
type	normal paper
email
last changed	2006/05/28 07:42

_id	22ec
authors	Bechthold, Martin
year	2001
title	Complex shapes in wood: Computer-aided design and manufacture of wood-sandwich roof shells
source	Harvard University
summary	Computer-Aided-Design, Engineering and Manufacturing (CAD/CAE/CAM) technology has changed the way consumer products, automobiles or airplanes are designed and made. The emerging applications for CAD/CAE/CAM technology in architecture, and the way this technology impacts how we design and construct the built environment, are yet unclear. This thesis investigates the relation between advanced digital design tools and the making of physical objects by focusing on an exemplary architectural element—wooden roof shells. The research objective is to expand the scope of architectural design through the application of CAD/CAE/CAM technology rather than to use this technology to streamline existing processes. The thesis develops a specific technical solution that allows the design and manufacture of new types of wooden roof shells. These are complexly shaped multifunctional construction elements that are manufactured off-site. Based on the close connection between digital design tools and the new Computer-Numerically-Controlled manufacturing process the author proposes a theoretical model of shared digital environments for collaborative design in architecture. The proposed manufacturing process treats wood as a modern composite material. Thin wood strips and foams combine into structural sandwich panels that can then be joined into a roof shell. The geometrically complex panels are generated by a combination of subtractive Computer-Numerically-Controlled machining processes and manual work. Infrastructure elements can be embedded into the sandwich build-up in order to enhance the functionality of the roof as a building envelope. Numerical tools are proposed that allow the determination of manufacturing-related parameters in the digital design environment. These inform the architectural and structural design in the early design phases. The digital collaborative design environment is based on a shared parametric solid model and an associated database. This collectively owned, feature-based design model is employed throughout the design and manufacturing process and constitutes the means of concurrent design coordination of all participants. The new manufacturing process for wood/foam sandwich shells is verified by designing and manufacturing prototypes. Design guidelines and a cost estimation are presented as the practical basis for architects and engineers to incorporate new types of roof shells into architectural projects.
keywords	Architecture; Agriculture; Wood Technology; Design and Decorative Arts
series	thesis:PhD
last changed	2003/02/12 22:37

_id	8948
authors	Bertola Duarte, Rovenir
year	2001
title	AS APROXIMAÇÕES DO COMPUTADOR AO PROCESSO DE ENSINO/ APRENDIZADO DO PROJETO ARQUITETÔNICO (An Approach to Computing in the Teaching/Learning Proces in Architectural Project Design)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 207-209
summary	This article seeks to disclose part of the results obtained with the development of the master dissertation. (DUARTE [2], 2000) The several approach forms between the computers and the process teaching/learning of architectural design were investigated in this work, standing out, close moment the edict of MEC that regulated the introduction of the computers in the architecture schools in Brazil. Ten Brazilian schools of architecture were researched, through questionnaires and visits, in which four approach forms were detected, that were understood more deeply with a study of cases, highlighting: methods, supports, components and the teaching process and the design process built by the student.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ga0107
id	ga0107
authors	Ceccato, Cristiano
year	2001
title	Integration: Master [Planner \| Programmer \| Builder]
source	International Conference on Generative Art
summary	The development of modern computer-based design systems and advanced manufacturing methods have progressed to the point where the promise of mass-customisation and the establishment of the ‘designer as integrator’ are being realised: the former implies that designers can now act as creators of systems which produce infinite possibilities, and the latterthat the convergence of designer and manufacturer, through common technologies, is enabling a reunification between design and construction processes. This paper discusses the symbiotic relationships of these paradigms within design research, practice and their commercialimplications, and the significance of the integration of new design tools and production methods for architects and designers.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	048f
authors	Cheng, Ron K.C.
year	2001
title	Inside Rhinoceros
source	OnWord Press
summary	Master the ins and outs of building curved surfaces and organic shapes while sharpening your knowledge of the mathematics used in contemporary computer-aided engineering applications. Inside Rhinoceros provides readers with an all-inclusive introduction to 3D computer modeling using the newest release of Rhinoceros - Rhino™, Release 2 - with special emphasis on understanding NURBS surfaces and boundary-representation methods.
series	other
last changed	2003/02/26 18:58

_id	f97e
authors	Commission of the European Communities
year	2001
title	The e-learning action plan: designing tomorrow’s education
source	Communication from the Commission to the Council and the EuropeanParliament, COM(2001) 172 final, 28 March 2001
summary	The "eLearning: Designing tomorrow's education" initiative1 was adopted by the European Commission on 24 May 2000. Following up the conclusions of the Lisbon European Council, it set out the principles, objectives and lines of action of eLearning, defined as the use of new multimedia technologies and the Internet to improve the quality of learning by facilitating access to resources and services as well as remote exchanges and collaboration. The eLearning initiative was welcomed by the Ministers of Education and by the Feira European Council in June 2000. The eLearning initiative is part of the comprehensive eEurope Action Plan2, the aim of which is to allow Europe to exploit its strengths and overcome the barriers holding back the uptake of digital technologies. It also falls in with the Report on the concrete future objectives of education systems3 by adopting information and communication technology development as one of its objectives. The effectiveness of education systems depends entirely on the effectiveness of the approaches to teaching and learning. In order to be effective, the introduction of information and communication technologies will have to be accompanied by a far-reaching reorganisation of learning structures. The eLearning initiative is also of relevance for the candidate countries given the interest they have shown for the eEurope action plan.
series	other
last changed	2003/04/23 15:50

_id	24d2
authors	Da Costa Silva, Heitor
year	2001
title	MODELOS: FORMA E CONFORTO NA ARQUITETURA (Models: Form and Environment in Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 51-53
summary	The work presents a research project in its first phase of implementation. The research project deals with the manufacturing of architectural models which use new technology, for thermal and lighting investigation and using one heliodon as means of building assessment. The models to be produced will be chosen from built examples of the Modern Architecture of the XX Century. Initially virtual models will be constructed and afterwards the models will be printed in 3D. Once the three dimensional models were built they will be examined in one heliodon to evaluate their thermal and light performance. Also the models will be used as means of calibrating the heliodon itself. Lately the models will be incorporate as building examples for projects museum.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	e63c
authors	Donath, Dirk and González, Luis Felipe
year	2001
title	INTEGRATED PLANNING SUPPORT SYSTEM FOR LOW-INCOME HOUSING
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 113-116
summary	This article describes our current research focused at the development of an integrated planning support system for the low-income housing production, using as exploration field the participative-planning strategies, particularly implemented by the progressive housing program in Concepción, Chile. Setting our sights on the implementation of modern IT (Information Technology) into architectural field to support the entire planning process, it will be exposed the general deficiencies, diverse IT-tools, their combination possibilities and their practical contribution in order to prove the feasibility of a computer-aided system within a new concept of housing planning.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ga0117
id	ga0117
authors	Dupras, Martin and Bates-Brkljac, Nada
year	2001
title	The Virtual Forest: Integrating VRML Worlds and Generative Music
source	International Conference on Generative Art
summary	The Virtual Forest is a VRML world representing an imaginary forest, with a real-time generated music soundtrack. This soundtrack is generated by an algorithm which responds via network messages to actions happening in the VRML world. The VRML model uses real-life data (elevation maps, aerial and landscape photography) from a real forest to model an imaginary forest area of approximately 3 square km. The forest has a small number of animated books which when touched, trigger 'state' changes in the sound producing algorithm to alter the mood of the soundtrack. This is achieved by sending URL messages to a PHP gateway which then informs a PD (Pure Data) program to change its internal state accordingly. The PD program uses stochastic processes to generate, manipulate and recycle (or feedback) a sound stream. To further enhance the user experience ofinteraction with the generative process, some sounds are also immediately triggered by the books; additionally, a short generative poem is also returned to the user, as the content of the relevant page in the virtual book.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	e4a7
authors	Espina B., Jane J.
year	2001
title	La tecnologia digital en las edificaciones arquitectonicas de la modernidad [The Digital Tecnology In Modern Architectural Constructions]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 136-145
summary	This paper gives an overview of the experience developed by Computer Graphics II course of department of Communication in School of Architecture and Design of University of Zulia which was initiated since 1999.The work describes the methodology used by two groups of objectives: general of the course and those generated by experiences in two levels: one as analysis instruments and the other one during process of design. Course is looking for trainning in CAD system uses by 3D representation of modern buildings, so at the end of the experience students were succeed : 1) analysis of projects of modern architecture, 2) quick visualization and efficient volumetric representation, 3) make a digital format library of differents buildings of the city and 4) comprehension and historic knowledge of city. CAD systems used for representation of 2d and 3D drawings offer to architects tools as color, textures, shadows, plus generation of different points of view as isometrics, perspectives and realistic representations. The digital format of the selected buildings gives to drafts an additional value.
keywords	Modern Architecture; Three-Dimensional; Realistic Representation; CAD Systems; Digital Format
series	other
email
last changed	2003/02/14 08:29

_id	dc3f
authors	Fernández, Mónica Inés and Piegari, Ricardo Gustavo
year	2001
title	LA GRÁFICA DIGITAL COMO ÁREA DISCIPLINAR DE LA ARQUITECTURA (Digital Graphics as a Discipline inj Architecture)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 216-217
summary	Although we are already in the new millennium, some architects still doubt about the discipline introduction of the Digital Graph in architects development. For that reason, it is important to put forward some reflections in the sigradi, that collaborate to establish and spread the digital graph as a disciplinary area of teaching architecture. The Digital Graph included in the University of Architecture and postgraduation, collaborates from the biginning in the discipline development, as long as it trains and teaches the new way of architecture representation and prefiguration that arise from the introduction of new tools.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ga0124
id	ga0124
authors	Feuerstein, Penny L.
year	2001
title	Art In The Digital Age: Using Computer As An Expressive Tool
source	International Conference on Generative Art
summary	I use digital technology to visualize the theory that we experience any one moment in a "constant state of collage". I literally "scan" the moment, scanning objects such as rocks or paper, energy, and ideas into the computer to convert them to a new common language of binary numbers. After scanning, I work with digital tools to create generation, replication, and integration. These three attributes of the computer are used throughout my work. In this way the computer is used as an expressive tool to visualize the subconscious layering and relayering that occurs as the mind processes "experience" -that moment when the physical, intellectual, emotional and spiritual come together as one. I call this my "assemblage of the mind" with all that surrounds it. To illustrate this concept, I use software such as High Rez QFX or Photoshop to manipulate images of photographs drawings and paintings. I am exploring what happens to the gestural quality of the line or brushtroke when it has been maniplatedwith these digital tools. The manipulation of photography, drawings, paintings and found objects expresses a new reality that reflects this digital age.Digital imaging intensifies this reality because youhave the potential for infinite replications of the same image within one artwork. By making many reproductions it substitutes a plurality of copies for a unique existance. Using the generative tools, this plurality is taken a step further because it actually mimics our existance. Looking at Kasimir Malevich's painting, "basic Suprematist Element" inspired me to paint a brushstroke and transcend a photo of a landscape into it. By using transparency tools to integrate objects and photos with paintings, I want toconvey that the objective consciousness of an object is just as important as the subjective inner state of consciousness in experiencing reality. The irony is that my theory directly opposes Malevich's theories on Suprematism, yet it was Malevich who inspired me.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	7f13
authors	Gatermann, Harald
year	2001
title	First step to augmented reality: Combining vrml and pano-photos
doi	https://doi.org/10.52842/conf.caadria.2001.219
source	CAADRIA 2001 [Proceedings of the Sixth Conference on Computer Aided Architectural Design Research in Asia / ISBN 1-86487-096-6] Sydney 19-21 April 2001, pp. 219-230
summary	VRML as a world-wide standard for describing 3D-geometry is enhanced by using panorama-photography for realistic backgrounds - other than in quicktime-vr it is possible to move around by using several vrml-nodes.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	5d19
authors	Gómez Arvelo, Susana Carolina
year	2001
title	Simulador de proyecciones de sombras sobre modelos computarizados en 3d. Herramienta para evaluar la eficiencia de modelos de proteccion solar. [Shade simulator On 3D Computer Models. A Tool to Evaluate the Efficiency of Models for Solar Protection]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 156-165
summary	A Program of Graphic Computing, developed in the Language of Programming AUTOLISP and run in AUTOCAD 2000, which is guided toward the Investigation in Bioclimatic Architecture, is presented. Before a model of solar protection in 3D, and loading the input data of the geographical localization and orientation, time and evaluation date (chosen by the user), the program calculates and projects the simulation of the corresponding shade contours on every plane that constitutes the 3D pattern (openings, walls, protections, floor...). In this research different areas of knowledge concur: Plane and spherical trigonometry applied to the solar ray and to the Bioclimatic Architecture, space geometry, plane graphical representation of three-dimensional objects, a concept of the transformation of vision for the three-dimensional representation of the objects in computers, and modern programming techniques.
keywords	Bioclimatic Architecture; Heat Gaining Control; 3D Shades Simulator; Solar Protection
series	other
email
last changed	2003/02/14 08:29

_id	d146
authors	He, Jie
year	2001
title	CAD Study in Visual Analysis of the Visual Sustainability for China Urban Natural Landscape Planning
source	Chinese University of Hong Kong
summary	In this thesis a GIS-based CAD system prototype of evaluating visual quality of urban natural landscape environment is presented. This prototype is an indispensable component of the integrative Visual Sustainability research, and offers a calculable and visualizable technique to urban visual natural landscape assessment. This scientific method provides precise data to estimate the visibility of natural landscape in urban construction actuality. Furthermore, it can also work out supporting information for maintaining and protecting valuable visual landscape resources in further planning. Introduction of this methodology intends to improve the natural landscape cooperation in China urban planning through visual protection. Combining with popular CAD software such as AutoCAD and Microstation, the research team uses ArcView GIS software and its 3D Analyst extension to accomplish a set of research procedure, which includes data modification, model making, viewshed and view sensibility analysis. In addition, this system can create simultaneous 3D scenes or hire other information media as reference tools for professional analysis, design consultation and intercommunication. The core technologies of this proposed system are viewshed calculation and overlay analysis. In viewshed analysis, human visual characteristics are simulated by a series of ergonomics parameters of viewpoints. Viewshed of each viewpoint can be calculated into vector data and mapped by polygons identifying which region is visible and which is not. Overlay function of the proposed system is used in visual sensibility analysis to achieve the division of higher visual sensible area which indicates the common visible area from different viewpoints. Additionally, viewshed maps and visual sensibility results can add more information to mark out the areas that can satisfy certain visual parameters such as appropriate visual angle or visual distance. These overlaying results can visualized the visible areas into hierarchical visual perception quality categories in order to define the visual landscape significance of particular planning regions. A case study was operated to evaluate this system. The case is in Zhongshan city, Guangdong Province of China. Jinzishan hill region is the study site that picked by collaborating discussion of research team and the local government. It is located on the edge of urban built-up area. Jinzishan massif is the prominent landscape element of the surrounding environment. There are three topics in Jinzishan visual perception in this paper. The first topic is the visual quality evaluation of the intersections of its surrounding road system. The second is the integrated visual perception of two main roads called Qiwandao and Bo‚Äôailu. Finally is the analysis of the hill skyline visual quality in surrounding area. The analysis results in GIS vector data can be converted into popular data format and combined with other spatial information for practical application. And comments for future urban planning are collected and analyzed by professional responses to the computer-generated information investigation.
keywords	Natural Landscaping; Computer-Aided Design; Landscape Architecture; City Planning; Geographic Information Systems
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	8b0b
authors	Johnson, Scott and Goldman, Glenn
year	2001
title	Binary Oppositions: Should an Introduction to Computing in Architecture Be Taught as Separate Course?
doi	https://doi.org/10.52842/conf.acadia.2001.003
source	ACADIA Quarterly, vol. 20, pp. 3-5
summary	For quite some time, the traditional teaching approach by most architecture schools has been to separate design studios from other courses. New courses have occasionally added, to cover subjects not previously included in the curriculum. However, as technologies change and new, computer- based design tools are developed, it is worthwhile consider whether these new technologies should be introduced into the curriculum in the same way. Should courses be added to the curriculum, to supplement replace courses covering traditional tools and media? Or unnecessary or even inappropriate for the new technologies? This Binary Oppositions debate addresses this issue. question is, “Should an introduction to computing in architecture be taught as a separate course?” I argue to the affirmative. Glenn Goldman of NJIT argues to the negative. These arguments and our respective rebuttals are presented below.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	avocaad_2001_22
id	avocaad_2001_22
authors	Jos van Leeuwen, Joran Jessurun
year	2001
title	XML for Flexibility an Extensibility of Design Information Models
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The VR-DIS research programme aims at the development of a Virtual Reality – Design Information System. This is a design and decision support system for collaborative design that provides a VR interface for the interaction with both the geometric representation of a design and the non-geometric information concerning the design throughout the design process. The major part of the research programme focuses on early stages of design. The programme is carried out by a large number of researchers from a variety of disciplines in the domain of construction and architecture, including architectural design, building physics, structural design, construction management, etc.Management of design information is at the core of this design and decision support system. Much effort in the development of the system has been and still is dedicated to the underlying theory for information management and its implementation in an Application Programming Interface (API) that the various modules of the system use. The theory is based on a so-called Feature-based modelling approach and is described in the PhD thesis by [first author, 1999] and in [first author et al., 2000a]. This information modelling approach provides three major capabilities: (1) it allows for extensibility of conceptual schemas, which is used to enable a designer to define new typologies to model with; (2) it supports sharing of conceptual schemas, called type-libraries; and (3) it provides a high level of flexibility that offers the designer the opportunity to easily reuse design information and to model information constructs that are not foreseen in any existing typologies. The latter aspect involves the capability to expand information entities in a model with relationships and properties that are not typologically defined but applicable to a particular design situation only; this helps the designer to represent the actual design concepts more accurately.The functional design of the information modelling system is based on a three-layered framework. In the bottom layer, the actual design data is stored in so-called Feature Instances. The middle layer defines the typologies of these instances in so-called Feature Types. The top layer is called the meta-layer because it provides the class definitions for both the Types layer and the Instances layer; both Feature Types and Feature Instances are objects of the classes defined in the top layer. This top layer ensures that types can be defined on the fly and that instances can be created from these types, as well as expanded with non-typological properties and relationships while still conforming to the information structures laid out in the meta-layer.The VR-DIS system consists of a growing number of modules for different kinds of functionality in relation with the design task. These modules access the design information through the API that implements the meta-layer of the framework. This API has previously been implemented using an Object-Oriented Database (OODB), but this implementation had a number of disadvantages. The dependency of the OODB, a commercial software library, was considered the most problematic. Not only are licenses of the OODB library rather expensive, also the fact that this library is not common technology that can easily be shared among a wide range of applications, including existing applications, reduces its suitability for a system with the aforementioned specifications. In addition, the OODB approach required a relatively large effort to implement the desired functionality. It lacked adequate support to generate unique identifications for worldwide information sources that were understandable for human interpretation. This strongly limited the capabilities of the system to share conceptual schemas.The approach that is currently being implemented for the core of the VR-DIS system is based on eXtensible Markup Language (XML). Rather than implementing the meta-layer of the framework into classes of Feature Types and Feature Instances, this level of meta-definitions is provided in a document type definition (DTD). The DTD is complemented with a set of rules that are implemented into a parser API, based on the Document Object Model (DOM). The advantages of the XML approach for the modelling framework are immediate. Type-libraries distributed through Internet are now supported through the mechanisms of namespaces and XLink. The implementation of the API is no longer dependent of a particular database system. This provides much more flexibility in the implementation of the various modules of the VR-DIS system. Being based on the (supposed to become) standard of XML the implementation is much more versatile in its future usage, specifically in a distributed, Internet-based environment.These immediate advantages of the XML approach opened the door to a wide range of applications that are and will be developed on top of the VR-DIS core. Examples of these are the VR-based 3D sketching module [VR-DIS ref., 2000]; the VR-based information-modelling tool that allows the management and manipulation of information models for design in a VR environment [VR-DIS ref., 2000]; and a design-knowledge capturing module that is now under development [first author et al., 2000a and 2000b]. The latter module aims to assist the designer in the recognition and utilisation of existing and new typologies in a design situation. The replacement of the OODB implementation of the API by the XML implementation enables these modules to use distributed Feature databases through Internet, without many changes to their own code, and without the loss of the flexibility and extensibility of conceptual schemas that are implemented as part of the API. Research in the near future will result in Internet-based applications that support designers in the utilisation of distributed libraries of product-information, design-knowledge, case-bases, etc.The paper roughly follows the outline of the abstract, starting with an introduction to the VR-DIS project, its objectives, and the developed theory of the Feature-modelling framework that forms the core of it. It briefly discusses the necessity of schema evolution, flexibility and extensibility of conceptual schemas, and how these capabilities have been addressed in the framework. The major part of the paper describes how the previously mentioned aspects of the framework are implemented in the XML-based approach, providing details on the so-called meta-layer, its definition in the DTD, and the parser rules that complement it. The impact of the XML approach on the functionality of the VR-DIS modules and the system as a whole is demonstrated by a discussion of these modules and scenarios of their usage for design tasks. The paper is concluded with an overview of future work on the sharing of Internet-based design information and design knowledge.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	554e
authors	Koutamanis, Alexander
year	2001
title	3 x 2 Approaches to Design Management
doi	https://doi.org/10.52842/conf.ecaade.2001.220
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 220-225
summary	Following the arguably successful introduction of building, project and real estate management to traditional architectural areas, design management is emerging as the new hot issue. One of the main arguments for it is the alleged low performance of the architect in the face of the technical complexity and operational intricacy that characterizes current design problems. In this respect, management is seen as the missing link in the architect’s methodical and operational framework. The paper suggests that this link derives more from the constraints of the domain and its subject matter rather than a management perspective. Design management refers to two main dimensions of architectural design, these of design method and of design subject. With respect to the first dimension we distinguish between three main categories: proscriptive, prescriptive and descriptive approaches. In the second dimension the distinction is between the coordination of the design process and that of the design product. The 3x2 matrix defined by these two dimensions stresses the significance of descriptive approaches for the informatization of the representation and communication of the design product. In this framework design information management emerges as an applied area of (computational) design theory that facilitates the amphidrome development of a design, i.e. not only from brief to postoccupancy but also from detail, case and precedent to design idea and solution, as well as the identification and management of critical moments, i.e. moments characterized by convergence of activities and hence extensive and intensive communication.
keywords	Method, Management, Descriptive, Informatization
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: