Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 15541

Reformat results as: short short into frame detailed detailed into frame

_id	cb18
authors	Belibani, R., Gadola, A. and Marinelli, A.
year	1995
title	Hypervisible Cities: Seville, Barcelona, Lisbon
doi	https://doi.org/10.52842/conf.ecaade.1995.161
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 161-168
summary	The Hypertext 'HYPERVISIBLE CITIES: SEVILLE, BARCELONA, LISBON" was realised within the interuniversity scientific research "La Prodazione dei circuiti multimediali didattici per l'architettura e l'urbanisticai (The production of multimedia didactic circuits for architecture and urban planning), co-ordinator Prof Paola Coppola Pignatelli - Dipartimento di Progettozione Architettonica e Urbana - Facolta di Architettura, Universita "La Sapienza", Roma, Italia. The aim of the research is the representation through the hypermedia tool of the significant of the cities, perceived through their images. The hypertext it has been attempted to make hypervisible three major cities - Seville, Barcelona, Lisbon - through a horizontal/vertical reading, according to three directions of probing, for comparisons purposes among different methods of growth of the city form.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_21.htm
last changed	2022/06/07 07:54

_id	ascaad2016_013
id	ascaad2016_013
authors	Belkis Öksüz, Elif
year	2016
title	Parametricism for Urban Aesthetics - A flawless order behind chaos or an over-design of complexity
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 105-112
summary	Over the last decade, paradigm shifts in the philosophy of space-time relations, the change from space-time to spatio-temporality, caused significant changes in the design field, and introduced new variations and discourses for parametric approaches in architecture. Among all the discourses, parametricism is likely the most spectacular one. The founder of parametricism, Patrik Schumacher (2009) describes it as “a new style,” which has “the superior capacity to articulate programmatic complexity;” and “aesthetically, it is the elegance of ordered complexity in the sense of seamless fluidity.” In its theoretical background, Schumacher (2011) affiliates this style with the philosophy of autopoiesis, the philosophy that stands between making and becoming. Additionally, parametricism concerns not only the physical geometry in making of form; but also discusses the relational and causal aspects in becoming of form. In other words, it brings the aesthetic qualities in making through the topological intelligence behind becoming. Regarding that, parametricism seems an effective way of managing /creating complex topologies in form-related issues. However, when it comes to practice, there are some challenging points of parametricism in large-scale design studies. Thus, this work underlines that the dominance of elegance for urban planning has the potential of limiting the flexible and dynamic topology of the urban context, and objectifying the whole complex urban form as an over-designed product. For an aesthetic inquiry into urban parametricism, this paper highlights the challenging issues behind the aesthetic premises of parametricism at the urban design scale. For that, Kartal Master Plan Design Proposal by Zaha Hadid Architects (2006) will be discussed as an exemplary work.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	acadia06_440
id	acadia06_440
authors	Bell, Brad
year	2006
title	The Aggregate of Continuum
doi	https://doi.org/10.52842/conf.acadia.2006.440
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 440-454
summary	The Traversable Matrix (Fig. 1.) illustrates the iterative fragments that comprise the continuum of exploration for a digital aesthetic and digital tectonic. These non-hierarchical fragments operate as footholds across a larger tessellated landscape of current digital design explorations. In seeking an organizational strategy, we attempt to move laterally across a variety of examples, texts, and illustrations. Each short excerpt is a partial architecture illustrating deeper issues in the current discussion of digital fabrication. Though counter to conventional academic inquiry, the associative approach can help frame the matrix; the synthetic landscape traversed becomes less linear, less framed but no less interconnected and cohesive. The patterning of complex geometries, the production of ornament, the leveraging of digital fabrication against standard forms of material and construction practices, and the acute emphasis on surface all serve as the aggregate to a broader spectrum of architectural thinking and architectural making.Introduction: The Traversable Matrix
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia14_453
id	acadia14_453
authors	Bell, Brad; Read, T. Cord; Ede, Austin; Barnes, Nathan
year	2014
title	Casting non-repetitive Geometries with Digitally Reconfigurable Surfaces
doi	https://doi.org/10.52842/conf.acadia.2014.453
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 453-462
summary	The research is a digitally reconfigurable formwork, controlled by Arduinos and stepper motors, capable of producing a wide range of geometric outcomes for largel-scale panel prototypes using concrete or composite materials.
keywords	Reconfigurable Molds, Panelized Surfaces, Precast Concrete, Digital Fabrication and Constructions, 3D Printing, Arduinos, Material Logics and Tectonics
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	acadia04_186
id	acadia04_186
authors	Bell, Bradley
year	2004
title	Digital Tectonics: Structural Patterning of Surface Morphology
doi	https://doi.org/10.52842/conf.acadia.2004.186
source	Fabrication: Examining the Digital Practice of Architecture [Proceedings of the 23rd Annual Conference of the Association for Computer Aided Design in Architecture and the 2004 Conference of the AIA Technology in Architectural Practice Knowledge Community / ISBN 0-9696665-2-7] Cambridge (Ontario) 8-14 November, 2004, 186-201
summary	The computer in architectural design has shifted from its role as a merely representational device to that of a tool for instrumentalized simulation and fabrication. The desire to make buildings look like a rendering, or to produce photo-realistic images and walkthroughs has given way to an opening of the potentials of software to assist the designer with managing complex geometries, parametric organizational diagrams, structural analysis, and integrated building systems. Simulation has become the means by which virtual space becomes more than just a mirror of reality. It becomes the space within which different potential realities can be tested and evaluated before they are materially implemented. In architecture, information derived from material constraints to site conditions can be constantly fed into the computer models to provide an accurate update, which in turn introduces feedback into the overall design, and change can then be registered in the detail.
keywords	surface, patterns, structure, CAD/CAM, fabrication
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2013r_020
id	ecaade2013r_020
authors	Bello Diaz, Gabriel; Dubor, Alexandre
year	2013
title	Magnetic architecture. A new order in design
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 237-245
summary	With the exploration of additive manufacturing, Magnetic Architecture develops different systems and strategies to use magnetic fields for controlling material through construction. In this research we utilize the overlapping of different technologies and digital tools that participate in the innovation of architecture. Thanks to hacked 6-axis robots, Magnetic Architecture approaches decision making from a top/down and bottom/up process. These new processes and conclusions are continuously leading to more areas of research and new design processes, which begins to question the role of the architect with these emerging technologies.
keywords	Additive Manufacturing; Sensor Logic; Incremental Coding; Dynamic Blueprints (DBP)
email
last changed	2013/10/07 19:08

_id	acadia17_544
id	acadia17_544
authors	Schleicher, Simon; La Magna, Riccardo; Zabel, Joshua
year	2017
title	Bending-active Sandwich Shells: Studio One Research Pavilion 2017
doi	https://doi.org/10.52842/conf.acadia.2017.544
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 544- 551
summary	The goal of this paper is to advance the research on bending-active structures by investigating the system’s inherent structural characteristics and introducing an alternative approach to their design and fabrication. With this project, the authors propose the use of sandwich-structured composites to improve the load-bearing behavior of bending-active shells. By combining digital form-finding and form-conversion processes, it becomes possible to discretize a double-curved shell geometry into an assembly of single-curved sandwich strips. Due to the clever use of bending in the construction process, these strips can be made out of inexpensive and flat sheet materials. The assembly itself takes advantage of two fundamentally different structural states. When handled individually, the thin panels are characterized by their high flexibility, yet when cross-connected to a sandwich, they gain bending stiffness and increase the structure’s rigidity. To explain the possible impacts of this approach, the paper will discuss the advantages and disadvantages of bending-active structures in general and outline the potential of sandwich shells in particular. Furthermore, the authors will address the fundamental question of how to build a load-bearing system from flexible parts by using the practical example of the Studio One Research Pavilion. To illustrate this project in more detail, the authors will present the digital design process involved as well as demonstrate the technical feasibility of this approach through a built prototype in full scale. Finally, the authors will conclude with a critical discussion of the design approach proposed here and point out interesting topics for future research.
keywords	material and construction
series	ACADIA
email
last changed	2022/06/07 07:57

_id	cf2017_585
id	cf2017_585
authors	Ben, Yuqiang; Niblock, Chantelle; Bonenberg, Lukasz
year	2017
title	Lincoln Cathedral Interactive Virtual Reality Exhibition
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 585-595.
summary	This paper demonstrates a workflow converting terrestrial laser scan (TLS) data into an interactive virtual reality (VR) platform. A VR exhibition prototype of Lincoln Cathedral was created to validate the established workflow in terms of the technical and visual performance, usability, and functionality. It combined TLS data and storytelling to produce a shareable platform, inviting opportunities for public engagement, and to facilitate custodians with the tools to maintain the building’s heritage. The paper discusses the use of open sourcesoftware and suggests future work.
keywords	3D Laser Scan, Virtual Reality, User Experience, Building Heritage
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	2a36
authors	Ben-Moshe, R. and Sorgen, A.
year	1988
title	Parametric Shape Definition by Example
source	12, [13] p., [7] p. of ill. Israel: MICROCAD, 1988(?). includes bibliography
summary	Incorporation of parametric design facilities into CAD systems presents some serious problems. The major issues are: (1) functionality - the need to cater for a great variety of designs, (2) natural user interface, with no need for the user to acquire programming skills, (3) integration and consistency with the 'host' CAD environment
keywords	parametrization, user interface, CAD, geometric modeling, mechanical engineering, CAM
series	CADline
last changed	2003/06/02 13:58

_id	ascaad2006_paper29
id	ascaad2006_paper29
authors	Bennadji, A. and A. Bellakha
year	2006
title	Evaluation of a Higher Education Self-learning Interface
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	This paper is a follow-up to a previous paper published in ASCAAD 2004 (A. Bennadji et al 2005). The latter reported on CASD (Computer Aided Sustainable Design) a self-learning educational interface which assists the various building’s actors in their design with a particular attention to the aspect of energy saving. This paper focuses on the importance of software evaluation and how the testing is done to achieve a better human-machine interaction. The paper will go through the summative evaluation of CASD, presents the output of this evaluation and addresses the challenge facing software developers: how to make an interface accessible to all users and specifically students in higher education.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2004_paper9
id	ascaad2004_paper9
authors	Bennadji, A.; H. Ahriz, and P. Alastair
year	2004
title	Computer Aided Sustainable Design
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	One of the most important aspects architects need to consider fairly early on is that of energy saving, cost, thermal comfort and the effect on the environment in terms of CO2 emissions. At present, during the early design stage of a building, different options are assessed using simple tools (tables, graphs and software) that contain a large number of assumptions the very nature of which can bias choice or possibly lead to an inappropriate solution. It can be argued that the only way to provide a rational assessment of options is to use calculation methods that represent in detail the physical processes involved; this usually involves the use of dynamic thermal models. Furthermore if this tool is also used during detailed design it would introduce a consistency that is normally absent from the analytical design process. Many designers are of the opinion that, because not all details are known, then such tools are not suitable for application at early stages in the design. This view can be challenged because, even at the concept stage, a great deal is known about a building. This paper aims to show that a general description of a building can be used to generate sufficient data to drive a valid analysis using a detailed thermal model at the early sketch stage of the design process. The paper describes the philosophy, methodology and the interface developed to achieve this aim. The interface guides the user through the input process using a series of screens giving options for keywords used to describe the building; comprehensive default data built into the software are then attached to these keywords. The resulting data file is a building description that is the best possible interpretation of the design intent. This can then be used to assess options and guide towards a final design.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ascaad2010_000
id	ascaad2010_000
authors	Bennadji, Amar; Bhzad F. Sidawi & Rabee M. Reffat (eds.)
year	2010
title	CAAD - Cities - Sustainability
source	5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010)[ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, 361 p.
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impacts on our today’s buildings and cities. The 5th international ASCAAD conference invited academics, researchers and professionals interested in CAAD concepts applications on the built environment to join and contribute to the debate on learned lessons from the past and present impacts of CAAD on buildings and cities around the world along with the potential future from a CAAD perspective.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	acadia14projects_269
id	acadia14projects_269
authors	Bennani, Sofia; Singer-Bieder, Alexandra; Michel, Agathe
year	2014
title	ViscoPlasty
doi	https://doi.org/10.52842/conf.acadia.2014.269
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 269-270
summary	ViscoPlasty proposes an installation using Straw-k: a flexible, fast, and feasible fabrication process, which operates on the plasticity of discrete, standard components to create a dynamic, aggregate surface.
keywords	fabrication process, plasticity, bespoke pipe comonent, robotic paths
series	ACADIA
type	Tex-Fab
email
last changed	2022/06/07 07:54

_id	acadia09_98
id	acadia09_98
authors	Bennett, Ed
year	2009
title	ArtBus: A Minimal Bus and Protocol for Distributed Interfacing in Art and Design
doi	https://doi.org/10.52842/conf.acadia.2009.098
source	ACADIA 09: reForm( ) - Building a Better Tomorrow [Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-9842705-0-7] Chicago (Illinois) 22-25 October, 2009), pp. 98-104
summary	ArtBus is a protocol and hardware bus for interfacing computers to sensors and actuators. It is a distributed interface, meaning that different parts of an ArtBus system can be at different locations in a space. ArtBus devices can be made on any embedded platform or microcontroller. While unconventional in some ways, ArtBus makes use of engineering design inspired by long established supervisory control and laboratory instrumentation practice. At the same time it is a simple, flexible interface which should be viable into the next generation of media devices and embedded control.
keywords	Hardware, sensor, interactive design, media
series	ACADIA
type	Normal paper
email
last changed	2022/06/07 07:54

_id	ijac20076104
id	ijac20076104
authors	Benoudjit, Mohamed Amine; Coates, Paul S.
year	2008
title	Artificial networks for spatial analysis
source	International Journal of Architectural Computing vol. 6 - no. 1, pp. 59-78
summary	This paper tests digital representation techniques which can be used by artificial neural networks in a computer-aided design (CAD) environment to analyze and classify architectural spaces. We developed two techniques for encoding volumetric data: vertex representation and feature space representation, as input for artificial neural networks. We tested how two different kinds of artificial neural networks, perceptron networks and self-organizing maps, could recognize given shapes in these representational formats. We have found that a one-layer perceptron can be used to classify shapes even when presented with input vectors composed of real numbers. These spatial representation techniques provide a method for using ANNs for architectural purposes.
series	journal
last changed	2008/06/18 08:12

_id	sigradi2022_16
id	sigradi2022_16
authors	Benros, Deborah
year	2022
title	A multilingual grammar for ‘The International Style’, and its hybrid grammar
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 323–334
summary	This paper describes the proposal and results of a multilingual shape grammar to describe the designs of three architects, precursors of the ‘International Style’. A shape grammar is a generative process that allows the recreation of designs that follow a language. Grammars are useful mechanisms to describe patterns and generative processes that can be used for analysis or design exploration. Most grammars represent one language. This study focuses on three independent languages within the same movement. The proposed grammar is parametric and allows the independent recreation of each independent design. Its difficult application can be linked to the difficult evaluation process. This research proposes a quantitative and a qualitative method of grammar evaluation, using respectively Principal Components Analysis (PCA) and user questionnaires. The results are then discussed and assessed using hybrids that fall in between languages and help delineate parametric spaces.
keywords	Shape Grammars, Multilingual Grammar, Generic Shape Grammar, Hybrid grammar
series	SIGraDi
email
last changed	2023/05/16 16:55

_id	ijac202322106
id	ijac202322106
authors	Benros, Deborah
year	2024
title	‘The International Style’ multilingual three-dimensional grammar and hybrid designs
source	International Journal of Architectural Computing 2024, Vol. 22 - no. 1, 1-21
summary	The present paper describes a multilingual shape grammar to recreate the work of three designers that preconized the ‘International Style’. This is a top-down three-dimensional formulation. Whilst most grammars are monolingual and univocal, this work creates a multilingual formulation within the same artistic movement. Typically, a grammar describes a family of design solutions. These are helpful mechanisms to describe patterns that can be used for analysis or design exploration. This multilingual three-dimensional parametric grammar allows the independent recreation of original designs from three designers and hybrid solutions. Shape grammar’s difficult application can be linked to its evaluation process. The original contribution of the study lies in the use of quantitative and qualitative methods for grammar evaluation, using Principal Components Analysis and user questionnaires. The PCA provides a pragmatic analysis, and the questionnaires an intuitive reading. Together they corroborate the results which are discussed using hybrids that assist in delineating parametric spaces
keywords	Multilingual grammar, generic grammar, shape grammar, hybrid designs
series	journal
last changed	2024/07/18 13:03

_id	caadria2012_014
id	caadria2012_014
authors	Benros, Deborah; Jose Pinto Duarte and Sean Hanna
year	2012
title	An alternative Palladian shape grammar: A subdivision grammar for Palladian villas
doi	https://doi.org/10.52842/conf.caadria.2012.415
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 415–424
summary	This paper describes a shape grammar that recreates Palladio’s villas. A Palladian grammar was previously proposed by Stiny and Mitchell. However, this alternative grammar uses different parametric shape rules and methodology to test the hypothesis that different grammars can generate the same corpus of designs. The formalism is then implemented using a computerised design tool. The grammar includes subdivision rules that allow for a more economical formulation. The project is part of wider research aimed at formulating a generic housing grammar.
keywords	Shape grammar; design rules; housing grammar
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2015_467
id	cf2015_467
authors	Benrós, Deborah; Eloy, Sara and Duarte, José Pinto
year	2015
title	Re-inventing ceramic tiles: Using shape grammars as a generative method and the impact on design methodology
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 467.
summary	The following paper describes the process and results achieved with the workshop entitled ‘Re-inventing Portuguese ceramic tiles’ reflecting on design methodology and design teaching. Workshop participants were invited to rethink ceramic tile patterns developing a different process which used shape grammars as a generative system. Each participant group developed a three stage task using shape grammars principles and methodology. The preliminary results the work developed are of particular relevance in shape grammar research: firstly shape grammar formulae does not constitute an intuitive process to most creative designers which are often trained to design singular solutions for a specific problem, secondly more than one operative shape grammar can be formulated to represent the same corpus of solutions and lastly the generative potential of grammars transcends the normal capacities of the original grammarist aiding in design exploration and enlarging the corpus of feasible solutions. This paper also reflects on the impact of shape grammars as a design methodology.
keywords	Shape grammar, patterns, ceramic tiles, 2d, 3d
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ijac201210404
id	ijac201210404
authors	Benrós, Deborah; José P. Duarte, Sean Hanna
year	2012
title	A New Palladian Shape Grammar
source	International Journal of Architectural Computing vol. 10 - no. 4, 521-540
summary	The following paper describes a shape grammar that recreates Palladian villas.A Palladian grammar was originally proposed by Stiny and Mitchell. However, this alternative grammar uses different parametric shape rules and methodology to test the hypothesis that different grammars can generate the same corpus of designs.The formalism is then implemented using a computerised design tool.The grammar includes subdivision rules that allow for a more economical formulation.A new corpus of solutions is explored and the derivation is compared with the original Palladian grammar. The project is part of wider research aimed at formulating a generic housing grammar.
keywords	Shape grammar; Design Rules; Housing Grammar
series	journal
last changed	2019/05/24 09:55

For more results click below: